Need desperate help, now sure where to put this

I have a Zenworks 10.3 server that was running fine...all of a sudden, it says database will not start. I reboot and stopped and started database manually I THINK bu going to CL and typing:
/opt/novell/zenworks/bin/novell-zenworks-configure -c Start
I chose ZEN database and stopped and starting it, about 2 minutes later I get an error, and it says use dbsupport to virw it, but I cannot seem to invole this tool from the CL...anways, if anyone has any suggestion, I would GREATLY appreciate it as of right now I am dead in the water. PS- I do not have a zman back up....I am hopeing I can look at the log and rescue this db...I am open to suggestions....

Whatever you do, backup the files before doing anything else.
Most Likely the Transaction Log is corrupt.
Do you have a recent database backup?
If so, I would recommend restoring it.
If not, you may be able to start the database without the transaction log.
Here are some tips for an older version of Sybase that still generally
hold true.
https://www-304.ibm.com/support/docv...id=swg21147095
On 9/15/2011 1:16 PM, Techlord wrote:
>
> I have a Zenworks 10.3 server that was running fine...all of a sudden,
> it says database will not start. I reboot and stopped and started
> database manually I THINK bu going to CL and typing:
> /OPT/NOVELL/ZENWORKS/BIN/NOVELL-ZENWORKS-CONFIGURE -C START
>
> I chose ZEN database and stopped and starting it, about 2 minutes later
> I get an error, and it says use dbsupport to virw it, but I cannot seem
> to invole this tool from the CL...anways, if anyone has any suggestion,
> I would GREATLY appreciate it as of right now I am dead in the water.
> PS- I do not have a zman back up....I am hopeing I can look at the log
> and rescue this db...I am open to suggestions....
>
>
Craig Wilson - MCNE, MCSE, CCNA
Novell Knowledge Partner
Novell does not officially monitor these forums.
Suggestions/Opinions/Statements made by me are solely my own.
These thoughts may not be shared by either Novell or any rational human.

Similar Messages

Lenovo 120GB portable hard drive won't disconnect (not sure where to put this!)

I didn't see any specific forums/areas for portable hard drives, so I thought I'd try here-- if it's in the wrong place, please let me know!
I got a 120gb lenovo portable hard drive over the holidays, and just today tried plugging it in; the only thing I did was check how much space it had free on it (111gb, but I did find out why that is!), but now I can't remove it. That is, when I try to use the 'safely remove hardware' thing, I get a message saying that the device is still being used by a program. However... there shouldn't be any program using it! I was told that normally it's not a problem to just straight-up unplug the usb cords from the computer, but I'd rather not have to do that every single time I use the portable hard drive.

Welcome to the forum,
In order that members can help you trouble shoot this you may want to post some more details. Most importantly which OS you are running.
Did you have something like Windows Media Player running when you tried to disconnect the drive? I've experienced the same with WMP running; it links to the drive looking for files it can play / add to it's playlists and therefore Windows thinks it is still in use.
Message Edited by andyP on 01-28-2009 07:54 AM
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

This is less a question and more of a suggestion and I am not sure where to put it..... I would like an update that would allow you to have a tone for each individual email account

I am not sure where to put this but I would like individual tones for all my email accounts

Wonderful suggestion.
You can give Apple feedback here > http://www.apple.com/feedback/
Hop that helps

I need desperate help with Itunes for the SLVR

I have a set playlist for Itunes to take songs from and put onto my phone when it is connected. That playlist has 56 songs, but when I click autofill, it only puts 31 songs down. As I add more songs to the playlist however, it only takes certain ones. For example, for every 7 songs I download into the playlist, it only takes 2 or 3. The phone has tons of space but I don't know, need desperate help, thanks in advance.

i know i have the same problem the only one thing i have noticed that is consistant along with this problem is that songs that will not go on it are all of them have a higher bit rate than songs that do go on the phone but thats the only real thing i can notice so if someone can show me how to lower the bit rate if its possible that might be the miracle cure

Urgent where i put this code for delete

hi master
sir this code is right for my requirment but when i put on_delete event system not respons or not delete record
where i put this code for conditional deletion
this is my code
declare
     recno number;
begin
if :system.cursor_block='accbal' then
delete accbal where accid=:chartofacc.accid;
     go_block('chartofacc');
     next_record;
elsif :system.cursor_block='chartofacc' then
     select count(*) into recno from accbal where accid=:chartofacc.accid;
     if recno=0 then
     delete_record;
     go_block('chartofacc');
     previous_record;
     else
     message ('system found matching record then no delete master record');
     message ('system found matching record then no delete master record');
     end if;
end if;
end;
please gide me which event i use
thanking you
aamir

Hello,
The ON-DELETE triger fires only after a COMMIT statment and only for those records that have been deleted in the block.
Francois

I NEED DESPERATE HELP! ADWARE THAT DOES NOT GO AWAY NO MATTER WHAT I TRY

So I was downloading something to my computer and, of course, I got stuck with that Only Search thing and no matter what I try it DOES NOT GO AWAY. I tried turning off my extensions, I tried switching networks, I tried resetting safari. Deleting my history. Every. Single. Thing.
And nothing works.
Pleas please PLEASE someone help me with getting rid of this I HATE having an adware.

There is no need to download anything to solve this problem.
You may have installed the "VSearch" trojan. Remove it as follows.
Malware is always changing to get around the defenses against it. These instructions are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
Back up all data before proceeding.
Step 1
From the Safari menu bar, select
          Safari ▹ Preferences... ▹ Extensions
Uninstall any extensions you don't know you need, including any that have the word "Spigot," "Trovi," or "Conduit" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
Reset the home page and default search engine in all the browsers, if it was changed.
Step 2
Triple-click anywhere in the line below on this page to select it:
/Library/LaunchAgents/com.vsearch.agent.plist
Right-click or control-click the line and select
          Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item named "com.vsearch.agent.plist" selected. Drag the selected item to the Trash. You may be prompted for your administrator login password.
Repeat with each of these lines:
/Library/LaunchDaemons/com.vsearch.daemon.plist
/Library/LaunchDaemons/com.vsearch.helper.plist
Restart the computer and empty the Trash. Then delete the following items in the same way:
/Library/Application Support/VSearch
/System/Library/Frameworks/VSearch.framework
~/Library/Internet Plug-Ins/ConduitNPAPIPlugin.plugin
Some of these items may be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
The problem may have started when you downloaded and ran an application called "MPlayerX." That's the name of a legitimate free movie player, but the name is also used fraudulently to distribute VSearch. If there is an item with that name in the Applications folder, delete it, and if you wish, replace it with the genuine article from mplayerx.org.
This trojan is often found on illegal websites that traffic in pirated content such as movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow.
You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that the Internet criminal behind VSearch has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing has not done so, even though it's aware of the problem. This failure of oversight has compromised both Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
          Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

I have been having problems with e-mails coming through to my 3g iphone recently, my e-mail provider recommended diabling the SSL as a default option but im not sure where to find this on the phone can anyone help?told

Please can you advise how to disable the SSL on my iphone, i am not sure where the setting is.
Thanks
Tania

Go to Settings/Mail, Contacts, Calendars. Tap the name of the email account. If you don't see a bar labeled "Advance" near the bottom, Tap Account. Tap Advanced. Under Incoming Settings, there should be an option to Use SSL. If it is ON, tap it to turn it off.

External hard drive, sharing, itunes? Not sure where to post this?

sorry guys but i'm not sure where this belongs, but anyway. I just bought my macbook and purchased a Western Digital harddrive ( external ) anyway I have like 80gigs of pics and music and want to get it from my iPod back onto the computer. Not a problem............My problem is that I can't put it directly onto the external drive I first need to put it on the macbook then transfer it to the externak hardrive. When I do this is winds up on my mac HD and also on my external hardrive. I only want it in one place. Ok, my ultimate goal right now is to buy an iMac which I'm doing this weekend. Got rid of my PC's ( Go Apple !) LOL. I want to put all my music ,videos,pics, movies on the external hardrive and be able to share it with both my Macbook and my imac. I simply want to be able to access my everything from both pc's but get it all from the EHD. Right now it's all on my macbook and I want to free up the space, plus learn how to do it for the future. Sorry to ramble. So far I've posted a few times and someone always comes through. Everyone here is awesome, it's like another planet compared to the PC world.
thanks
Mike , NYC
macbook Mac OS X (10.4.9) HP Desktop

Put your iTunes folder on the eternal hard drive, and make a alias to it from your home directory on the MacBook (Cmd-L). Do the same when you get the iMac.
I didn't quite get how the two computers are sharing the hard drive, or maybe you'll put the hard drive on the iMac and share the library. There's a lot of ways to make this work. You made a good decision.

I didn't know where top put this so...

The Adobe Photoshop forums are down for an upgrade so I don't know where to post this but I need help. Since yesterday Photoshop CS4 has been showing banding in my soft brushes and gradients, it mostly comes up when I am using a dark color on another dark color or on similar colors together but it has been working fine for a very long time until yesterday where it just happened randomly. I have tried restarting, resetting preferences, installing cs3 and seeing if it happened there, and using just about every color profile I could think that would make a difference, and none of them work. Please someone help I need this fixed asap.

Send Apple your feedback here: Product Feedback

Aperture. I have so many pictures and not sure where to put them now that my MacBook Pro is filled?

I have so many pictures on my Mac book pro on aperture that I can not put anymore on. If I put them on a hard drive h
Then how do I access them like a library?

Aperture allows you to store your Images' Originals on any directly connected drive (must be formatted "Mac OS Extended, Journaled"), and gives you the option and the ability to move your Originals any time you want.
So get an external drive, format it correctly, select the Images whose Originals you want to move to that external drive, and move them using the command "File➞Relocate Originals".
An Image's Original must be on-line in order for you to be able to make adjustments, export, or print that Image. When the Original is off-line, you are still able to change the metadata, and view and share the Image's Preview.
If you are uncertain about the parts of Aperture, my User Tip is as good a place to start as I know .
Here is the topic as covered in the well-done Users Manual. Note that the User Manual uses the terms "Master" and "Original" synonymously, and that it confuses users by refering to referenced and managed _Images_. Image's are not, themselves, referenced or managed. The Original of each Image is a file (the one you imported); that file is the item that is either referenced or managed.
What Are Managed Images and Referenced Images?
Scroll down the linked page.
Relocating Referenced Masters
HTH,
--Kirby.
Message was edited by: Kirby Krieger — added in attempt to clarify.

Need desperate help with iTunes and now to report my issue

Hello,
I have just been cleared out of my £70 gift vouchers i received for Christmas by downloading an buying ingame things for something called "Kingdom Conquest"
I have never seen or heard of this game, I had an email saying it was downloaded onto another device that wasnt mine and i should change my password so i did.
Next thing i see is 2 emails saying i purchased 2 X £30.99 bundles. How do i get this refunded and reported. I am very frustrated about this.
Thank you.

Hi P3DR0X.
Don't worry, this sort of thing is easy to take care of. The iTunes Store can oftentimes refund you for purchases such as these. Just connect to them via https://expresslane.apple.com and ask about it.
Cheers.

Water spilled onto macbook - Need emergency help now, please!

Hello,
Last night about one cup of water spilled onto my macbook. Basically, it shut down and I made the mistake of trying to turn it on (multiple times).
It is now dry, but it still will not turn on. I do not have apple care, but I still do have a limited warranty.
My question is: what are my options? I need it repaired a.s.a.p. I know everybody says this, but I really do need it for college.
Anyway, again, what is the best option? Can I mail it it for them to fix? What NEEDS to be fixed? If I take it to an apple store (the nearest is about 300 miles away), can they fix it (and on the spot)? How much should this cost?
Thank you, in advance, for your help.

You can call Apple service. They will have to see it before they can quote a repair price. Not sure what country your in but if it is the US you could also try http://www.macservice.com/macbook.html, They will check it out and give you a quote and they are usually cheaper than Apple on most repairs. You can also do a search for MacBook Repairs and find numerous other sources for repair that may be very close to where you live.

Messed Up BAD need DESPERATE HELP

My computer died a week ago, I rebuilt it and put in Final Cut Pro. My movie which is on a Lacie Drive worked great till tonight when it said I ran out of memory (my new HD has 250 gigs unused and my Lacie has over 25 gigs unused). Anyway in SYSTEM SETTINGS I set a new place for my work. Now I can't open any of my Lacie Drive files which contain my movie.
I think I have to reset the SYSTEM SETTINGS to where they were originally but I don't remember where they were.
What do I do? I have so much work to do on this movie and I'm at a loss. It's driving me liteally insane!
Thanks: George

Good Lord, the different between memory AND hard drive storage...
We're talking basic computer... no VERY basic computer knowledge here.
Print this... hold it in your hand. OK got it?
Now,
Close all the programs, everything.
Click the Apple up there on the left.
A box will come up.
Look in the box. (The box will have a GREAT BIG Mac OSX in the middle.
Under that it will say Version _________ (should say 10.4 - and another number, something like probably 8, 9 or 10.
Under that will be PROCESSOR... and then
MEMORY if it reads any less than 2 GB you don't have enough. If it reads 4 or more... you have about enough....
This is the RAM - Random Access Memory, what the computer uses to run all of the programs. What Final Cut Pro uses to run itself, capture video, edit video, display video and render video.
When Final Cut Pro has enough RAM memory to do all of these things, it will quietly perform its duties and give you nice video just as you asked for.
When Final Cut Pro does not have enough RAM it will send you a message "OUT OF MEMORY". What this mans is, Final Cut Pro can not complete the request you made of it without having more memory. Either your machine is maxed out on memory, in which case you cannot do everything you asked Final Cut Pro to do in one request... or you are a cheapskate and need to buy more memory for your computer.
No offense, all our computers have told us we are cheapskates many times over the years.. Final Cut Pro requires lots of memory. Editing Video requires lots more memory. If you will note the bottom of my reply you will note I have 4 Gigs of memory in my G5. Often that is not enough to do everything I want to do in real time. I have decided not to reward my box with more memory but to endure the messages and save my money for a new Intel box....
Bottom line is: More memory is a choice. You'll always need more.
Forgot to explain the difference:
Hard drive space is simply storage.. like a drawer in your desk.. when it gets full you empty it.. if it's not full you can stuff more stuff in it. Do not let your system drive get more than 85 to 90 percent full. That's the drive with with OSX and FCP on it. it will run slow.. maybe even run less than slow...
Same with your scratch disk.. that's the disk you capture video and audio to. It should never be the same as the system disk. Bad news, bad stuff, bad decision, bad, bad, bad....
Hope this helps explain the difference between memory and storage.
Message was edited by: John Criswell
Message was edited by: John Criswell

Need Desperate Help Regarding iPhone 4 Sync Issue (PC, Win7)

I'll attempt to make this question as concise and fully informative as possible. I have an iPhone 4 Jailbroken running firmware v4.3.3. I typically sync my phone with my PC on a normal basis until this past October I bought a new SSD and had to re-install iTunes on my C drive. As you know, a re-install means that any re-sync with a fresh iTunes install means that the phone will basically wiped clean. Since the new iTunes install I have regularly been "Backing Up" the iPhone,(but never synced it) however this is not a "Sync" of course, but I figure it still beneficial to do. I believe I have the following options and/or issues to deal with:
1) Is there any way to "reverse-sync" the iPhone to the PC, instead of the other way around? I kept the old iTunes operating files but I am not sure which ones I'd need to copy over to which folder to make a "current" sync happen, or to "fool" iTunes into thinking nothing has changed since the fresh install.
2) I realize a "restore" will erase the jailbreak, but what if I choose "Restore From Backup", will that also erase or reset the jailbreak?
3) I am mainly concerned with calendar appointments, my apps with invaluable information, and notes. Everything else such as music I can simply re-sync if I have to.
In essence, I am trying to do a up-to-date sync with the new iTunes install and loose as little data and information as possible (or none at all). I have apps installed such as iFile that hold many files within the folder tree structure of the phone that I cannot afford to loose. I'd be willing to make backup copies of all these files if there is a viable solution for me, which Im hoping somebody can recommend to me.
If there is a special app or PC app that I need to make things run smoother or achieve my goal I am more than happy to install whatever it takes. Thank you for any responses, they are most appreciated.
I have attempted to be as detailed yet brief as possible with my explanation of the nature of my problem, yet feel free to ask a question if it will assist you in further diagnosing and solving my issue.

Let's say I, at this very moment, "Backup" my phone in iTunes. Once finished, I immediately perform a "Restore from Backup"
There will be no change in your phone, assuming you didn't change anything or receive any messages between backing up and restoring the backup. The phone will have exactly the content of what was in the backup.
will iTunes have imported all saved phone data into its registry?
It saves phone and app settings, messages, visual voicemail, contacts, Camera Roll, app data.
such as apps, music, etc., since, remember, nothing is there now. I need to put phone contents on the PC rather than the other way around
No!!!!! iTunes Store content (apps, music, media) is synced to and from iTunes - it's not in the backup. If you never synced your phone with this computer before, the first sync is unidirectional from the computer to phone. If there's nothing in the iTunes library now, what's in your phone will get deleted. In this case, you have to first "Transfer Purchases" To do this:
1. Be sure that automatic syncing on connection is disabled in iTunes Prefs > Devices > Disable.....
2. Connect phone with iTunes open.
3. Right-click the device tab on left border of iTunes window.
4. Select "Transfer Purchases." Note that any music/media on the phone that was not originally obtained from the iTunes Store will not transfer to the computer.
It's now safe to sync the phone. Note that when you select "Sync" on the iTunes page, the phone is typically backed up as well, if you didn't set it up to backup to iCloud instead.
http://support.apple.com/kb/HT1766
http://support.apple.com/kb/ht4946

Need desperate help on hook

Please would somebody help me. I bought a Mackie 402 pro mixer. I have a T.C.Electronics Vocal Prism Plus (for singing and background effects) that has a left and right output and a SPDIF in and out jacks. I have a Denon 3202 tuner/amp (that I use VCR- in and out jacks) that I use to boost the singing and etc. I want to hookup up my mixer into the Creative labs Sound Blaster X-Fi fatility card on my computer that only has a line in and a line out. I want to be able to mix from my mixer but at the same time use the Denon to amplipy the sound. I would appreciate anybodys help. I am new to mixing and I really don't even know what buttons to push or what to mute and etc. I am sure there is someone that can help me.

I called Apple Support and they sent me some important information. You can not mix the formats to import into iMovie. I continually saw the SD footage but not the HD or AVCHD files. It was suggested that I remove the footage and format the HD in the camera. Sooooooo what about the footage on the camera which could not be replaced.
Thank goodness for PCs.
I had an old version of the Sony PMB program on my HP laptop which is very slow. This program allows you to import both HD and SD files so I connected the SR11 to the PC and imported both formats into the PC in separate folders on the Desktop for easy locating. All appeared OK in the PC so I then formatted the SR11 erasing everything including stills (very important) on the card and HD and checked the camera to be sure it was clean. I then exported the HD files back into the camera and then checked to be sure all was there and then disconnected the USB cable from the PC. This took forever because I had 40+ Gigs of data on the camera which had to go both ways, import and export.
I forgot to turn iMovie off on the iMac but as soon as I plugged the camera USB cable into the iMac the import window popped open and walla, all the HD footage was there so I spent the rest of the evening importing it into the iMac as MOV files. The SD footage was already in the iMac because iMovie saw it initially when I tried to import everything. The still files were copied to the iMac via the network.
I will say that this was the first time the iMovie Import window had ever opened on its own. Just like the instructions say.
I reformatted the SR11's HD and I am now ready to start afresh.
KEEP THAT PC in the closet you just never know when it might come in handy!
Andy

Need desperate help, now sure where to put this

Similar Messages

Maybe you are looking for