Need detail information about Data Cleanse Transform.

Hi Every One,
I Need detail information about Data Cleanse Transform.
1. what is Local Cleansing Packages?
2. what are Directories and Dictioneries.
3. Data Cleanse Transform INPUT , OPTIONS, OUTPUT tabs and usage.
4. Details on Transform Input Field name in Data Cleanse INPUT tab.
5. What is PARENT_COMPONENT,FILED_NAME,FIELD_CLASS,CONTENT_TYPE in Data Cleanse OUT POT TAB.
I tried using "EnglishNorthAmericaDataCleanse" transform with NAME_OR_FIRM_LINE1. When I ran the job I got below warning message and my job was success full nut status it shown as failed.
Warning message:
"Trasform Data Cleanse is unable to retrieve cleansing packages from Cleansing Package Builder. Only local cleansing packages are available. Info: Unable to log on: Could not connect to server d184932040.sng1.attens.net:6400. Please check that the server name is correct, and that the server is running. "
Please make me understand, why did I get above message.
Thanks in Advance ...

Hello,
Cleansing package is a reference file that contains content and rules around person, firm, title, phone data and so on. Cleansing package used to be referred to as dictionaries. Directories are usually referred to address reference data or address directories. The input, output and option tabs are similar to other Data Quality transforms. For detail information on what each of the input fields and output fields are and how the options work can be found in the Data Services’ Designer Guide (http://help.sap.com/bods).
The warning message you are getting is stating that Data Services is not able to connect to the server to check to see if you have made modifications to the PERSON_FIRM cleansing package. You are not required to make any changes to the PERSON_FIRM cleansing package, but can change rules or content based on your organizational rules. If you want to make changes you will need to install SAP Information Steward. If you would like to install SAP Information Steward you can find documentation for installation on the Help Portal, http://help.sap.com/bods, along with some great Videos.
You can also find some great Data Services Product Tutorials on the SAP Community Network, at http://scn.sap.com/docs/DOC-54115.
Thank you,
Lynne Lintelman

Similar Messages

Need detailed information about u0093CALL CUSTOMER FUNCTIONu0094.

Need detailed information about CALL CUSTOMER FUNCTION.

Hello Ayan
CALL CUSTOMER FUNCTION. is the old version of
customer exits. Using transaction SMOD you can see which customer exits SAP provides. Using transaction CMODyou can see the enhancement projects which make use of these SAP enhancements.
SAP enhancements consist of different components: function modules, screens, etc.
For example, SAP enhancement CATS0001has a single component, function module EXIT_SAPLCATS_001. This function module is called within include LCATSF54:
*&      Form READ_WORKLIST_FROM_EXIT
*       Read worklist from customer exit                               *
FORM read_worklist_from_exit.
DATA: l_catsw TYPE catsw_tab.        "XZQAL0K061795
*----------------Beginn XZQPL0K017888----------------
DATA: l_icatsw_fix LIKE catsw OCCURS 0.          "XZQPL0K017888
* Sichern der ICATSW_FIX, damit mögliche Änderungen aus
* User-Exit/Badi rückgängig gemacht werden können.
l_icatsw_fix = icatsw_fix.
*----------------Ende XZQPL0K017888----------------
CALL CUSTOMER-FUNCTION '001'
       EXPORTING
            sap_tcats      = tcats
            sap_pernr      = catsfields-pernr
            sap_dateleft   = catsfields-dateleft
            sap_dateright = catsfields-dateright
            sap_datefrom   = catsfields-datefrom    "XZQPL0K017888
            sap_dateto     = catsfields-dateto      "XZQPL0K017888
       TABLES
            sap_icatsw     = icatsw
            sap_icatsw_fix = l_icatsw_fix           "XZQPL0K017888
       EXCEPTIONS
            OTHERS        = 1.
*-------------Beginn XZQAL0K061795 Worklist-Badi in CATS -------
IF badi_worklist IS INITIAL.
    CALL METHOD cl_exithandler=>get_instance   "Aufruf der Factory-
       CHANGING instance = badi_worklist.      "Methode
ENDIF.
l_catsw = icatsw[].
* Restaurieren der l_icatsw_fix für das Badi, falls sie
* doch im User-Exit geändert worden ist.
l_icatsw_fix = icatsw_fix.                  "XZQPL0K017888
CALL METHOD badi_worklist->get_worklist    "Aufruf des Add-Ins
    EXPORTING
      sap_tcats      = tcats
      sap_pernr      = catsfields-pernr
      sap_dateleft   = catsfields-dateleft
      sap_dateright = catsfields-dateright
      sap_datefrom   = catsfields-datefrom    "XZQPL0K017888
      sap_dateto     = catsfields-dateto      "XZQPL0K017888
    CHANGING
      sap_icatsw     = l_catsw
      sap_icatsw_fix = l_icatsw_fix.          "XZQPL0K017888
icatsw[] = l_catsw.
*-------------Ende XZQAL0K061795 Worklist-Badi in CATS -------
ENDFORM.                               " READ_WORKLIST_FROM_EXIT
In this routine you can see the most up-to-date version of customer exits:
BAdIs (Business AddIns). Inbetween SAP has developed BTEs(transaction FIBF) which are basically dynamically called function modules.
Regards
Uwe

Need a information about data base stastics

hi all
i need information about data base stastics how to implement the data base stastics what are steps involved in implementation and data base stastics and bw stastics bothare same or diffrent.
any pointers helpful

Hi,
While you can collect/refresh the DB statistics thru the Performance tab or a Process Chain step, it's probably better to have the DBA schedule the run of BRCONNECT to collect statistics. This provides two key benefits, the statistics collection can be moved to off hours rather than during a load window, which is usually tight in most shops, and the other benefit is that it can collect statistics only on tables that have had significant changes in size. There is really no need to collect stats every day on every table - that is just wasted system effort.
There have been several OS Notes to provide some settings in the recent couple of support packages to control options on statistics collection on ODSs that you might want to review too.
Pls chk this links;
Re: Question regarding the statistics.
Re: DB statistics / Cube statistics
Re: About DB statistics
Hope this helps,
Regards
CSM Reddy

Two tables that provide detail information about data source?

what are the tables that provide information about the datasource?
How to prevent duplicate records in at the data target level?

ROOSOURCE for the details of the datasource...
How to avoid duplicate? --> Dont load same data twice..If delta is supported by the datasource then do a psuedo delta, or delete pervious request with same selections when you do a full load...
Plz elaborate on your question..

I need some information about scripts

hi,
i need detailed information about scripts.tell me where it will available.
bye
sreenu.

Hi,
Posting in the ep forum,I believe you require Information on javascripts and client side eventing(EPCF).
Here is the link that you need with regard to this:
http://help.sap.com/saphelp_erp2005/helpdata/en/ce/3e98408d953154e10000000a1550b0/frameset.htm
(Or go to SAP NetWeaver Developers Guide->
IT Scenario-Driven Enhancements to Applications->Running an Enterprise Portal->Core Development Tasks->Creating and Managing Content->Client-side Eventing)
The below document can also be useful.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/documents/a1-8-4/enterprise portal client.pdf
If you need an illustration of how epcf can be used , you can refer to this blog
/people/arulraja.ma/blog/2004/12/18/how-to-include-loading-message-in-a-portal-iview-ep6-sp2
Regards,
Harish
(Please award points for helpful answers)

I need an information about sap-bw(retail)in extraction

hi friends
just i m new sap bw so please i need to no an detail information about
sap-bw(retail)in extraction could please any one help me
urs
naveen

Hi,
Check the following links.
http://help.sap.com/saphelp_nw04/helpdata/en/73/d26594107711d4af1e080009d2232d/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/86/39d6386e24f90ae10000000a114084/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3ed09790-0201-0010-c28e-c639f87d40b9
Regards,
®

I need some information about jre 1.5 and jre 1.6.

Hello guys,
I need some information about jre 1.5 and jre 1.6.
Suppose if i have jre 1.5 customized with "additional language support" installed in my my desktop, and later on i install jre 1.6. will this jre over write all the esisting settings which was present in jre 1.5?
In short will the version upgrades disable the features of the old Version even though the old version is present in the desktop?
Thanks in advance for your answers.

In <2j_j3.1889$[email protected]> =?iso-8859-1?B?VG9t4XMgU3XhcmV6?= writes:
> Hi all, I am developing an acquisition data system for biomedical
>signals and I need to transmit this data from my hardware to PC using the
>USB port. For this, I am writing a device driver for Windows 98
^^^^^^ ^^^^^^ ^^^^^^^ ^^
That's not a trivial step. I would write a small C/C++ program that
exercises your driver (for robustness) just to be sure it's working
right first without crashing your system.
>The problem is that I don't know to use this driver in LabView.
>For now, I think to use a "code interface node" with code writen in C or a
>"call library function" with a DLL.
That's correct. _After_ you got your C/C
++ test program (and USB
driver) above working, then you can convert this little test program
into a DLL or CIN, which can interface with LabView. A DLL might be
easier (slightly) to write, but the CIN will work faster with LabView
and can be designed to be reentrant. The Code Interface Reference
Manual should guide you. Remember, this is a task for an _experienced_
C programmer. You'll need to use handles to pointers into all your
dynamic arrays and such passed into LabView.
After you got your CIN or DLL written, you can use a special CIN
function node to "link" (or bind) your CIN object into LabView's VI
diagram.
SOME THOUGHTS:
There are many hardware devices already on the market today that come
with Windows 98 drivers and DLL (or even CIN) libraries that would work
immediately with LabView. Why don't you save yourself three months of
work and simply buy one of these?
/\ Mark M Mehl, alias Superticker (Supertickler to some)
<><> Internet: [email protected]
\/ Preferred
UUCP: uunet!iastate.edu!mehl
Disclaimer: You got to be kidding; who would want to claim anything I said?

Need detail information, steps would be nicer, to upgrade from Exchange 2003 to Exchange 2010 to setup in test system first then try on production, since not much room for downtime, thanks bekir

Need detail information, steps would be nicer, to upgrade from Exchange 2003 to Exchange 2010 to setup in test system first then try on production, since not much room for downtime, thanks bekir

Hi,
Overview of the upgrade progress from Exchange 2003 to Exchange 2010 including the following steps:
Installing Exchange 2010 within your organization on new hardware.
Configuring Exchange 2010 Client Access.
Creating a set of legacy host names and associating those host names with your Exchange 2003 infrastructure.
Obtaining a digital certificate with the names you'll be using during the coexistence period and installing it on your Exchange 2010 Client Access server.
Associating the host name you currently use for your Exchange 2003 infrastructure with your newly installed Exchange 2010 infrastructure.
Moving mailboxes from Exchange 2003 to Exchange 2010.
Decommissioning your Exchange 2003 infrastructure.
For more details, please refer to this following document.
http://technet.microsoft.com/en-us/library/ff805040(v=exchg.141).aspx
Best Regards.

I need a information about inventory

I need a information about inventory ,can anyone provide me inventory related PDF,docs it will helpful for my project

invetory administration link
http://docs.oracle.com/cd/E26180_01/Platform.94/ATGCommStoreGuide/html/s0302atgcommerceinventoryadministrati01.html

Information about Data Transfer in mySAp retrail

Hello
I have a quetion I need to learn about Data Transfer then I have a guide to Initial Data Transfer in mySAP retrail version 1.2 Octuber 2001.
So, my question is: Are there another guide most recently about this topic? or these guide is fine for starting.
Thanks for your answers
Danny

Hello,
You have posted a question that is related to system transports. Unfortunately this category is not related to these kind of questions. SAP TM deals with logistics in the real world - moving pallets, containers, loading trucks, etc.
To learn more about SAP TM please visit [http://service.sap.com/scm-tm|http://service.sap.com/scm-tm]
Therefore I will now move this thread to the category Software Logistics. Thank you for your understanding.
Kind regards,
Nico van Os.

Where can i get detailed information about exchange ???

Hi,
I am looking for detailed information about Oracle Exchange product. What about a testing architecture, what about integration of erp systems, catalog architecture and so on. ... could you help me?
thank you. if you have some good whitepapers or so, just send it me please.
marc

For more information about the Oracle Exchange Marketplace software, please visit the following URLs: http://www.oracle.com/applications/exchange/index.html?content.html http://www.oracle.com/appsnet/products/exchanges/index.htm
For more information about Exchange and XML integration, sign up for Oracle APP Net and search on Exchange and XML.
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by marc fischer ([email protected]):
Hi,
I am looking for detailed information about Oracle Exchange product. What about a testing architecture, what about integration of erp systems, catalog architecture and so on. ... could you help me?
thank you. if you have some good whitepapers or so, just send it me please.
marc<HR></BLOCKQUOTE>
null

Data Quality Data Cleanse Transform SQL Connection Not Open

Iu2019m working with the previously installed version of Data Services and there are errors encountered with Data Cleanse transforms not having all the metadata. When validating or double-clicking the NA Eng DC transform the following Option Group/connection not open message is returned.
Option Group Error (Option Group: Datacleanse transform): The SQL connection returned by the Metadata Repository is not open.
Iu2019ve verified substitution parameters (including using those from another install in the environment which is functioning correctly), re-synched repos, database connectivity, amongst other things. Connectivity to the repository is otherwise behaving normally. Does anyone recognized this problem, know the resolution?

Todd,
In Data Services Designer, there is a Dicitonary > Manage Connection option that is used to access the Cleansing Package (CP). Note: You must seed the CP within Repository Manager. It sounds as if you may not have established a valid connection inside of Designer causing the error you are seeing.
Thanks,
Paula

HT5025 I need an information about the voiceover utility. In Israel the Iphone comes with the VoiceOver/Siri in hebrew? Would be possible to a blind israeli use the Iphone? How?

I need an information about VoiceOver/Siri in hebrew...
Would be possible to a blind israeli use the Iphone? How?
I ask you because the VoiceOver is not translated to hebrew...

If what you are asking is whether additional languages can be added to iPhone Voiceover, the answer is "no".
You can ask Apple to add Hebrew via
http://www.apple.com/feedback/iphone.html

Detail Information about all CPU IN Linux x86_64

Hi all,
How to get Detail Information about all CPU in Linux x86_64. Like number of cpu, utilisation, idle

user13549752 wrote:
Hi all,
How to get Detail Information about all CPU in Linux x86_64. Like number of cpu, utilisation, idle$ less /proc/cpuinfo ---cpu information
$ grep processor /proc/cpuinfo
$top ---command will show cpu utilization,idle time
# mpstat
mpstat -P ALL
# sar -u 2 5
refer:-
http://www.cyberciti.biz/tips/how-do-i-find-out-linux-cpu-utilization.html
for dba related linux commands refer,
http://gavinsoorma.com/unix-for-the-dba/
http://www.oracle-base.com/articles/misc/UNIXForDBAs.php
http://blogs.oracle.com/myoraclediary/entry/useful_unix_commands_for_dbas

I need some information about File Download & File Upload

Hi All,
Can any one help me on this, I need some information about File Download & File Upload.
I read tutorial abt file upload and download but some of methods in tutorial are deprecated so i need clear information abt File upload and Download, if possible Code examples.
Thanks
Ragards
Ravi Golla

Hi Ravi
Check out thses links for examples:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/00062266-3aa9-2910-d485-f1088c3a4d71
/docs/DOC-8661#22 [original link is broken]
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/202a850a-58e0-2910-eeb3-bfc3e081257f
Otherwise you can simply follow this code for file download
Use the code like this.
1) Create the button and bind the action for it.
2)then write this code in the action.
3) do not write any thing in the init method.
try {
final byte[] content = this.getByteArrayFromResourcePath("C:
xyz.properties");
final IWDCachedWebResource resource = WDWebResource.getWebResource(content, WDWebResourceType.UNKNOWN);
try {
final IWDWindow window = wdComponentAPI.getWindowManager().createExternalWindow(resource.getAbsoluteURL(), "WD_Filedownload", false);
window.open();
catch(Exception e)
wdComponentAPI.getMessageManager().reportException(new WDNonFatalException(e), false);
5) writr the method getByteArrayFromResourcePath
//@@begin others
private byte[] getByteArrayFromResourcePath(String resourcePath)
throws FileNotFoundException, IOException {
FileInputStream in = new FileInputStream(new File(resourcePath));
ByteArrayOutputStream out = new ByteArrayOutputStream();
int len;
byte[] part = new byte[10 * 1024];
while ((len = in.read(part)) != -1) {
out.write(part, 0, len);
in.close();
return out.toByteArray();
//end
Similarly for file upload
Similarly for upload in to server path also do the same
IWDAttributeInfo attInfo =
wdContext.getNodeInfo().getAttribute("upload");
binaryType =
(IWDModifiableBinaryType) attInfo.getModifiableSimpleType();
uploadedName = binaryType.getFileName();
File filename =new File("
<server name>
<folder name>
"+uploadedName ); );
try {
FileOutputStream out = new FileOutputStream(filename);
out.write(b);
out.close();
} catch (FileNotFoundException e) {
// TODO Auto-generated catch block
e.printStackTrace();
} catch (IOException e) {
// TODO Auto-generated catch block
e.printStackTrace();

Need detail information about Data Cleanse Transform.

Similar Messages

Maybe you are looking for