Need Detailed Info On Implementing BADI HRPAD00INFTYUI

We just upgraded to ECC 6.0 and EP 7.0 with the ESS Business Package. I would like to implement BADI HRPAD00INFTYUI to use Personalization to display some additional data in the Bank Information WD. I have looked at the "ESS Personal Information UI enhancement without modification " wiki by Markus Klein and it was helpful but I need detailed help on the process to implement the BADI. Does anyone have an example that they can provide? I'm new to BADI implementations and ABAP OO.

Okay... Click Here
If you have that much of a need for pre-OS X (classic), perhaps you'd be better off with a late model PPC iBook or PowerBook. You can still purchase them (refurbished) from Apple or on eBay (many with Applecare or that can have Applecare purchased for them).
Greg

Similar Messages

My MacBook is plugged in with a green light and shows it's plugged in, but is not charging. When it's unplugged, it dies. It was charging last time I used it but not any more. I am no computer whiz and need detailed info on what to do Thanks.

My MacBook is plugged in with a green light and shows it's plugged in, but is not charging. When it's unplugged, it dies. It was charging last time I used it but not any more. I am no computer whiz and need detailed info on what to do Thanks.

The model 2,1 MacBook has an easily removable battery. You can get a new third party battery fairly cheap on eBay. Every MacBook from 2006 through Mid 2009 except the Late 2008 Aluminum Unibody and the Late 2009 and 2010 White Unibodies use the same A1185 battery.
Black Batteries http://shop.ebay.com/i.html?_nkw=macbook+black+battery&_sacat=0&LH_BIN=1&_sop=12 &_dmpt=Laptop_Batteries&_odkw=macbook+white+battery&_osacat=0&_trksid=p3286.c0. m 270.l1313
White Batteries http://shop.ebay.com/i.html?_nkw=macbook+white+battery&_sacat=0&LH_BIN=1&_sop=12 &_dmpt=Laptop_Batteries&_odkw=macbook+black+battery&_osacat=0&_trksid=p3286.c0. m 270.l1313
Or for $129 from The Apple Store http://store.apple.com/us/product/MA566LL/A?mco=MTY3ODQ5OTY
Removing the battery:
Shut down the computer. Disconnect any cords connected to the computer.
Turn the computer over.
Locate the battery latch on one side of the battery.
Use a coin to turn the latch a quarter-turn clockwise. The battery should pop up slightly.
Lift the battery out.
Installing the battery:
Place the right side of the battery into the battery compartment at an angle, as shown below.
Gently press the left side of the battery down until it sits flat.
While holding the battery down, use a coin to turn the latch a quarter-turn counter-clockwise. The battery should lock into place.
Note: Keep in mind that once the new battery is inserted, you will need to press the power button to start up the computer.

Need detailed info about Active,New and Change log table in BI 7.0

Dear Experts,
I am new to this technology. Can you any one explain in very detail about ACTIVE, NEW and CHANGE LOG tables workflows.
And also i am requesting you all to give tips to how to study BI 7.0
Regards,
Ameer.N

For your first problem solution is this note: 936644
You might have not mapped the filed in your tarnsfer/update rules?

Detail info on SAP-ABAP interfaces

Hi experts,
                 i need detailed info on abap interfaces, means what are all interfaces in ABAP & how that will work ......i would like to know that BDC program comes under interface or not .....
Thanks in advance

Hi Narayana,
                               R/3 Application
                          ==================
                           ABAP work bench
   uesr interface ================== commntn interface
                         R/3 Basis(middleware)
                         ===================
                          System software(OS)
Integration of R/3 with the external application via open interface
OLE,RFC,ALE,EDI,CPI-C etc are the interfaces ...
Thanks
Mohinder Singh Chauhan

Need Ways to implement Badis in ECC 6.0 (Enhancement Points)

Hi experts,
I am new to BADIs. I've a requirement to find a BADI for changing Customer number while posting customer invoice in SAP (the data is coming from XI system in IDOC format). I want to know any BADIs or userexits are there for my requirement. At the same time I want to know how to implement a BADI in ECC 6.0 .Any docs releated to this topic will be of great help.
points will be awarded for sure..........

hi Poorna Chandras... ,
These steps should enable you to find any BADI related to any transaction in a matter of minutes.
Procedure 1:
1) Go to the transaction SE37 to find your function module.
2) Locate the function SXV_GET_CLIF_BY_NAME.
3) Put a breakpoint there.
4) Now open a new session.
5) Go to your transaction. 6) At that time, it will stop this function.
7) Double click on the function field EXIT_NAME.
8) That will give you name of the BADI that is provided in your transaction.
Business Add-Ins
Procedure 2:
1) Goto se24 (Display class cl_exithandler)
2) Double click on the method GET_INSTANCE.
3) Put a break point at Line no.25 (CASE sy-subrc).
4) Now Execute SAP standard transaction
5) Press the required button for which you need to write an exit logic, the execution will stop at the break point.
6) Check the values of variable 'exit_name', it will give you the BADI name called at that time.
7) This way you will find all the BADIs called on click of any button in any transaction
SAP Business Add-Ins (BAdIs) are one of the most important technologies used to adapt SAP software to specific requirements. BAdIs were introduced with Release 4.6 and replace function module exits. This technology is not limited to SAP applications. BAdI calls can be integrated in customer applications. These can then be enhanced by other customer applications. In the various SAP applications, BAdI calls are implemented at places where enhancements are appropriate.Business add-ins are enhancements to the standard version of the system. They can be inserted into the SAP System to accommodate user requirements too specific to be included in the standard delivery. Since specific industries often require special functions, SAP allows you to predefine these points in your software.
In contrast to customer exits, Business Add-Ins no longer assume a two-level infrastructure (SAP and customer solutions), but instead allow for a multi-level system landscape (SAP, country-specific versions, industry solutions, partner, customer, and so on). You can create definitions and implementations of Business Add-Ins at any level of the system landscape.SAP guarantees the upward compatibility of all Business Add-In interfaces. Release upgrades do not affect enhancement calls from within the standard software nor do they affect the validity of call interfaces. You do not have to register Business Add-Ins in SSCR.
The Business Add-In enhancement technique differentiates between enhancements that can only be implemented once and enhancements that can be used actively by any number of customers at the same time. In addition, Business Add-Ins can be defined according to filter values. This allows you to differentiate between Add-In implementations using the filter Country or other criteria.
The enhancement technique is set up in such a way that it is possible to define interfaces for ABAP soure code, screens, GUI interfaces, and tables. These allow customers to include their own enhancements in the standard. A single Business Add-In contains all of the interfaces necessary to implement a specific task.
BADI is just an object-oriented version of user-exit. Instead of entering program code into some function module (as in customer-exit), you define some class which has to implement predefined methods and those methods are fired at predefined points just like an old user-exit. Some BADI can have multiple independent implementations which is much better for software deployment as several developers can implement the same BADI independently. BADI/UserExists are used to enhance R/3 For customer Needs.
Actually there is no transaction to find when and where the BADI
is called.
1. You can see the BADI description to find why it is called.
2. Once you implemented and activated the BADI, put some break points
in the BADI and see "where else used" option to check in what all
programs this BADI is called. In the ITS debug, when you are doing
the operation what exactly the BADI description tells, it will take
to the break points and you have to do manually debug the whole thing.
I know its bit difficult to do manual debug the whole thing, it
takes lot of time, but you have to be very patience when you are
dealing with BADI's.
Transaction SE18 is the BADI equivalent of transaction SMOD
Transaction SE19 is the BADI equivalent of transaction CMOD .
To find the BADI to be implemented and then implement this via SE19.
Check this blogs 2 find a BADI:
How to find if we have a BADI in Transaction VB02
Re: BADI for screen enhancement in MM01 transaction
Re: BADI and User exits
How To Define a New BAdI Within the Enhancement Framework (Some Basics About the BAdI,BAdI Commands in ABAP,
When to Use a BAdI?)
/people/thomas.weiss/blog/2006/04/03/how-to-define-a-new-badi-within-the-enhancement-framework--part-3-of-the-series
How to implement a BAdI And How to Use a Filter
/people/thomas.weiss/blog/2006/04/18/how-to-implement-a-badi-and-how-to-use-a-filter--part-4-of-the-series-on-the-new-enhancement-framework
Introducing Business Add-Ins
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f3202186-0601-0010-6591-b832b1a0d0de
How to implement BAdi in Enhancement Framework
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d0456c54-0901-0010-f0b3-cd765fb99702
Business Add-Ins
http://help.sap.com/saphelp_47x200/helpdata/en/ee/a1d548892b11d295d60000e82de14a/frameset.htm
BAdI: Customer-Defined Functions in the Formula Builder
http://help.sap.com/saphelp_nw04/helpdata/en/04/f3683c05ea4464e10000000a114084/content.htm
Difference Between BADI and User Exits
http://www.sap-img.com/abap/difference-between-badi-and-user-exits.htm
To Use BADI - Business Add In you need to Understand ABAP OO Interface Concept
http://www.sap-img.com/abap/business-add-in-you-need-to-understand-abap-oo-interface-concept.htm
You can check the links for Step by Step Badi Implemntation
(very helpful self learning docs).
BADI Step by Step Implementation.
http://www.esnips.com/doc/e06e4171-29df-462f-b857-54fac19a9d8e/ppt-on-badis.ppt
http://www.esnips.com/doc/10016c34-55a7-4b13-8f5f-bf720422d265/BADIs.pdf
http://www.esnips.com/doc/43a58f51-5d92-4213-913a-de05e9faac0d/Business-Addin.doc
http://www.esnips.com/doc/1e10392e-64d8-4181-b2a5-5f04d8f87839/badi.doc
www.sapgenie.com/publications/saptips/022006%20-%20Zaidi%20BADI.pdf
http://www.sapdevelopment.co.uk/enhance/enhance_badi.htm
http://help.sap.com/saphelp_nw04/helpdata/en/04/f3683c05ea4464e10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/e6/d54d3c596f0b26e10000000a11402f/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/c2/eab541c5b63031e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/04/f3683c05ea4464e10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/e6/63ee7f486cc143a560799d8803ce29/content.htm
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/srm/badi-general+information&
http://www.esnips.com/doc/e06e4171-29df-462f-b857-54fac19a9d8e/ppt-on-badis.ppt
http://www.esnips.com/doc/10016c34-55a7-4b13-8f5f-bf720422d265/BADIs.pdf
http://www.esnips.com/doc/43a58f51-5d92-4213-913a-de05e9faac0d/Business-Addin.doc
http://www.esnips.com/doc/1e10392e-64d8-4181-b2a5-5f04d8f87839/badi.doc
www.sapgenie.com/publications/saptips/022006%20-%20Zaidi%20BADI.pdf
http://www.sapdevelopment.co.uk/enhance/enhance_badi.htm
http://help.sap.com/saphelp_nw04/helpdata/en/04/f3683c05ea4464e10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/e6/d54d3c596f0b26e10000000a11402f/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/c2/eab541c5b63031e10000000a155106/frameset.htm
The specified item was not found.
http://help.sap.com/saphelp_erp2005/helpdata/en/73/7e7941601b1d09e10000000a155106/frameset.htm
http://support.sas.com/rnd/papers/sugi30/SAP.ppt
http://www.sts.tu-harburg.de/teaching/sap_r3/ABAP4/abapindx.htm
http://members.aol.com/_ht_a/skarkada/sap/
http://www.ct-software.com/reportpool_frame.htm
http://www.saphelp.com/SAP_Technical.htm
http://www.kabai.com/abaps/q.htm
http://www.guidancetech.com/people/holland/sap/abap/
http://www.planetsap.com/download_abap_programs.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c8/1975cc43b111d1896f0000e8322d00/content.htm
http://www.allsaplinks.com/badi.html
/people/thomas.weiss/blog/2006/04/03/how-to-define-a-new-badi-within-the-enhancement-framework--part-3-of-the-serieshttps:///people/alwin.vandeput2/blog/2006/04/13/how-to-search-for-badis-trace-it
/people/thomas.weiss/blog/2006/04/18/how-to-implement-a-badi-and-how-to-use-a-filter--part-4-of-the-series-on-the-new-enhancement-framework /people/thomas.weiss/blog/2006/05/03/source-code-enhancements--part-5-of-the-series-on-the-new-enhancement-framework
http://www.esnips.com/doc/e06e4171-29df-462f-b857-54fac19a9d8e/ppt-on-badis.ppt
http://www.esnips.com/doc/10016c34-55a7-4b13-8f5f-bf720422d265/BADIs.pdf
http://www.esnips.com/doc/43a58f51-5d92-4213-913a-de05e9faac0d/Business-Addin.doc
http://www.esnips.com/doc/1e10392e-64d8-4181-b2a5-5f04d8f87839/badi.doc
http://www.esnips.com/doc/3b7bbc09-c095-45a0-9e89-91f2f86ee8e9/BADI-Introduction.ppt
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40921dd7-d5cf-2910-1894-bb62316afbd1
http://help.sap.com/saphelp_erp2005/helpdata/en/73/7e7941601b1d09e10000000a155106/frameset.htm
http://support.sas.com/rnd/papers/sugi30/SAP.ppt
http://www.sts.tu-harburg.de/teaching/sap_r3/ABAP4/abapindx.htm
http://members.aol.com/_ht_a/skarkada/sap/
http://www.ct-software.com/reportpool_frame.htm
http://www.saphelp.com/SAP_Technical.htm
http://www.kabai.com/abaps/q.htm
http://www.guidancetech.com/people/holland/sap/abap/
http://www.planetsap.com/download_abap_programs.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c8/1975cc43b111d1896f0000e8322d00/content.htm
/people/thomas.weiss/blog/2006/04/03/how-to-define-a-new-badi-within-the-enhancement-framework--part-3-of-the-series
/people/thomas.weiss/blog/2006/04/18/how-to-implement-a-badi-and-how-to-use-a-filter--part-4-of-the-series-on-the-new-enhancement-framework
http://esnips.com/doc/e06e4171-29df-462f-b857-54fac19a9d8e/ppt-on-badis.ppt
http://esnips.com/doc/43a58f51-5d92-4213-913a-de05e9faac0d/Business-Addin.doc
http://esnips.com/doc/10016c34-55a7-4b13-8f5f-bf720422d265/BADIs.pdf
http://esnips.com/doc/1e10392e-64d8-4181-b2a5-5f04d8f87839/badi.doc
http://esnips.com/doc/365d4c4d-9fcb-4189-85fd-866b7bf25257/customer-exits--badi.zip
http://esnips.com/doc/3b7bbc09-c095-45a0-9e89-91f2f86ee8e9/BADI-Introduction.ppt
http://help.sap.com//saphelp_470/helpdata/EN/eb/3e7cee940e11d295df0000e82de14a/frameset.htm
Difference Between BADI and User Exits
http://www.sap-img.com/abap/difference-between-badi-and-user-exits.htm
New to Badi`s
New to BADI
New to BADI long question
Badi
/message/4866901#4866901 [original link is broken]
Hope this helps
Rewards if useful.........
Cheers
Kripa Rangachari.

I'm contemplating using BADIs but need more info beforehand

Hello friends,
I just read few blogs and articles on BADIs and therefore, am kinda green in this area. But BADIs seem to be a way out of a problem that I am facing now. I must add a new field to a report generated by transaction MB25 which is a standard SAP transaction / report / code.
BADIs seem to be able to provide me with a mechanism of adding this field. However, I have few questions before going the BADI way.
1) If I understand correctly, in order for a BADI to work, I must have BADI spots and insertion POINTs. Supposing the existing or implemented BADI points are not good enough for my purpose and are not at the right place in the program. Does this mean I have to touch or edit SAP's code in order to introduce new insertion points?
2) This would mean editing standard SAP code. Is this really allowed?
3) Now let us imagine that I do this. What happens when there is an upgrade by SAP? What happens to my code, the insertion point and everything else that goes with it? Do I have to re-asses the insertion point, etc...?
Your help is greatly appreciated
GA
Message was edited by:
Goharjou ardavan

Hi,
1. You can introduce new insertion point. Either you have to use the given BAdi or you can just use the enhancement-point provided.
2 No. It is not actually editing SAP code. it is adding your code at the spot where SAp recommends.
3 It will not be touched during upgrade.
Regards,
Atish

Implementing BADI for PO

Dear All,
<b>In the PO creation badi, in create/change/save methods, i need to clear the purchase info record defaulted by SAP.
Also in create method, PO price needs to be defaulted as the same as PR price, if the reference PR is found. User should be able to change this default price and save the PO.</b> Hence, I have to restrict this logic only to create method.
Now i am trying to implement BADI for PO def (ME_PROCESS_PO_CUST) with (impl name: ZMM_POCREATE). For clearing the purchase info record i put the code in 2 different methods
1. PROCESS_ITEM
DATA: ls_mepoitem TYPE mepoitem.
break LAKSHMIS.
Get the PO item Details
ls_mepoitem = im_item->get_data( ).
ls_mepoitem-INFNR = space.
Set the item data
CALL METHOD im_item->set_data
    EXPORTING
      im_data = ls_mepoitem.
2. OPEN
DATA:
ls_header   TYPE mepoheader,
ls_mepoitem TYPE mepoitem.
break lakshmis.
CALL METHOD im_header->get_data
    RECEIVING
      re_data = ls_header.
Get the items for the PO using get items method and change the purch info record to SPACE and set the values using SET_DATA on item.
<b>However, in both the cases the value doesnot get changed (as i dont see any changing parameters provided). However the documentation of BADI says that we can change the HEADER as well as ITEM information in this BADI.</b>
Can anyone please suggest, where i am going wrong and what needs to be done in order to achieve the above two requirements.
Thanks in advance.
Regards,
Lakshmi

BADI
http://www.esnips.com/doc/e06e4171-29df-462f-b857-54fac19a9d8e/ppt-on-badis.ppt
http://www.esnips.com/doc/10016c34-55a7-4b13-8f5f-bf720422d265/BADIs.pdf
http://www.esnips.com/doc/43a58f51-5d92-4213-913a-de05e9faac0d/Business-Addin.doc
http://www.esnips.com/doc/1e10392e-64d8-4181-b2a5-5f04d8f87839/badi.doc
www.sapgenie.com/publications/saptips/022006%20-%20Zaidi%20BADI.pdf
http://www.sapdevelopment.co.uk/enhance/enhance_badi.htm
http://help.sap.com/saphelp_nw04/helpdata/en/04/f3683c05ea4464e10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/e6/d54d3c596f0b26e10000000a11402f/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/c2/eab541c5b63031e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/04/f3683c05ea4464e10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/e6/63ee7f486cc143a560799d8803ce29/content.htm
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/srm/badi-general+information&
http://www.esnips.com/doc/e06e4171-29df-462f-b857-54fac19a9d8e/ppt-on-badis.ppt
http://www.esnips.com/doc/10016c34-55a7-4b13-8f5f-bf720422d265/BADIs.pdf
http://www.esnips.com/doc/43a58f51-5d92-4213-913a-de05e9faac0d/Business-Addin.doc
http://www.esnips.com/doc/1e10392e-64d8-4181-b2a5-5f04d8f87839/badi.doc
www.sapgenie.com/publications/saptips/022006%20-%20Zaidi%20BADI.pdf
http://www.sapdevelopment.co.uk/enhance/enhance_badi.htm
http://help.sap.com/saphelp_nw04/helpdata/en/04/f3683c05ea4464e10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/e6/d54d3c596f0b26e10000000a11402f/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/c2/eab541c5b63031e10000000a155106/frameset.htm
The specified item was not found.
http://help.sap.com/saphelp_erp2005/helpdata/en/73/7e7941601b1d09e10000000a155106/frameset.htm
http://support.sas.com/rnd/papers/sugi30/SAP.ppt
http://www.sts.tu-harburg.de/teaching/sap_r3/ABAP4/abapindx.htm
http://members.aol.com/_ht_a/skarkada/sap/
http://www.ct-software.com/reportpool_frame.htm
http://www.saphelp.com/SAP_Technical.htm
http://www.kabai.com/abaps/q.htm
http://www.guidancetech.com/people/holland/sap/abap/
http://www.planetsap.com/download_abap_programs.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c8/1975cc43b111d1896f0000e8322d00/content.htm
http://www.allsaplinks.com/badi.html
/people/thomas.weiss/blog/2006/04/03/how-to-define-a-new-badi-within-the-enhancement-framework--part-3-of-the-serieshttps [original link is broken]:///people/alwin.vandeput2/blog/2006/04/13/how-to-search-for-badis-trace-it
/people/thomas.weiss/blog/2006/04/18/how-to-implement-a-badi-and-how-to-use-a-filter--part-4-of-the-series-on-the-new-enhancement-framework /people/thomas.weiss/blog/2006/05/03/source-code-enhancements--part-5-of-the-series-on-the-new-enhancement-framework
http://www.esnips.com/doc/e06e4171-29df-462f-b857-54fac19a9d8e/ppt-on-badis.ppt
http://www.esnips.com/doc/10016c34-55a7-4b13-8f5f-bf720422d265/BADIs.pdf
http://www.esnips.com/doc/43a58f51-5d92-4213-913a-de05e9faac0d/Business-Addin.doc
http://www.esnips.com/doc/1e10392e-64d8-4181-b2a5-5f04d8f87839/badi.doc
http://www.esnips.com/doc/3b7bbc09-c095-45a0-9e89-91f2f86ee8e9/BADI-Introduction.ppt
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40921dd7-d5cf-2910-1894-bb62316afbd1
http://help.sap.com/saphelp_erp2005/helpdata/en/73/7e7941601b1d09e10000000a155106/frameset.htm
http://support.sas.com/rnd/papers/sugi30/SAP.ppt
http://www.sts.tu-harburg.de/teaching/sap_r3/ABAP4/abapindx.htm
http://members.aol.com/_ht_a/skarkada/sap/
http://www.ct-software.com/reportpool_frame.htm
http://www.saphelp.com/SAP_Technical.htm
http://www.kabai.com/abaps/q.htm
http://www.guidancetech.com/people/holland/sap/abap/
http://www.planetsap.com/download_abap_programs.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c8/1975cc43b111d1896f0000e8322d00/content.htm
/people/thomas.weiss/blog/2006/04/03/how-to-define-a-new-badi-within-the-enhancement-framework--part-3-of-the-series
/people/thomas.weiss/blog/2006/04/18/how-to-implement-a-badi-and-how-to-use-a-filter--part-4-of-the-series-on-the-new-enhancement-framework
http://esnips.com/doc/e06e4171-29df-462f-b857-54fac19a9d8e/ppt-on-badis.ppt
http://esnips.com/doc/43a58f51-5d92-4213-913a-de05e9faac0d/Business-Addin.doc
http://esnips.com/doc/10016c34-55a7-4b13-8f5f-bf720422d265/BADIs.pdf
http://esnips.com/doc/1e10392e-64d8-4181-b2a5-5f04d8f87839/badi.doc
http://esnips.com/doc/365d4c4d-9fcb-4189-85fd-866b7bf25257/customer-exits--badi.zip
http://esnips.com/doc/3b7bbc09-c095-45a0-9e89-91f2f86ee8e9/BADI-Introduction.ppt
http://help.sap.com//saphelp_470/helpdata/EN/eb/3e7cee940e11d295df0000e82de14a/frameset.htm
Rewards if useful.........
Minal

Problem on Implementing badi ME_GUI_PO_CUST

Hi Expert,
I have implement BADI ME_GUI_PO_CUST, to add the new tab.
I have managed to View the tab in Both ME21N, and ME22N with implement SUBSCRIBE and MAP_DYNPRO_FIELDS.
method IF_EX_ME_GUI_PO_CUST~SUBSCRIBE
DATA: ls_subscriber LIKE LINE OF re_subscribers.
CHECK im_application = 'PO'.
CHECK im_element = 'ITEM'.
CLEAR re_subscribers[].
ls_subscriber-name = subscreen1.
ls_subscriber-dynpro = '0002'.
ls_subscriber-program = 'ZRPP_ME_GUI_PO_CUST_SCREEN'.
ls_subscriber-struct_name = 'CI_EKPODB'.
ls_subscriber-label = text-001.
ls_subscriber-position = 7.
ls_subscriber-height = 7.
APPEND ls_subscriber TO re_subscribers.
METHOD : IF_EX_ME_GUI_PO_CUST~MAP_DYNPRO_FIELDS
FIELD-SYMBOLS: <mapping> LIKE LINE OF ch_mapping.
LOOP AT ch_mapping ASSIGNING <mapping>.
    CASE <mapping>-fieldname.
      WHEN 'ZCNUM'.      <mapping>-metafield = mmmfd_cust_01.
    ENDCASE.
ENDLOOP.
Method IF_EX_ME_GUI_PO_CUST~MAP_DYNPRO_FIELDS
DATA: lw_fieldselection LIKE LINE OF ch_fieldselection.
LOOP AT ch_fieldselection INTO lw_fieldselection.
    lw_fieldselection-fieldstatus = '+'.
    MODIFY ch_fieldselection FROM lw_fieldselection.
ENDLOOP.
I need to store the value, and some of thread said it required methods:
TRANSPORT_FROM_MODEL
TRANSPORT_TO_DYNP
TRANSPORT_FROM_DYNP
TRANSPORT_TO_MODEL
I have click on the subcreen, or enter at the field, but it will not able to trigger the Above Methods.
How do I do for the to trigger above Methods? Or Should I added some additional code at screen program? I want SAVE the data actually into EKPO.
Thanks in advance.

Hi Sim,
Recently we have the same reqirement.
You can have a look at the below code..
First method: SUBSCRIBE
DATA: ls_subscriber LIKE LINE OF re_subscribers.* we want to add a customer subscreen on the Header tab
    CHECK im_application = 'PO'.
    CHECK im_element     = 'HEADER'.* each line in re_subscribers generates a subscreen. We add one subscreen in this example
    CLEAR re_subscribers[].
* the name is a unique identifier for the subscreen and defined in this class definition
    ls_subscriber-name = subscreen1.
* the dynpro number to use
    ls_subscriber-dynpro = '0001'.
* the program where the dynpro can be found
    ls_subscriber-program = 'SAPLZKMMM_KAU86037'.
* each subscreen needs his own DDIC-Structure
    ls_subscriber-struct_name = 'CI_EKKODB'.
* a label can be defined
    ls_subscriber-label = text-001.
* the position within the tabstrib can be defined
    ls_subscriber-position = 13.
* the height of the screen can be defined here. Currently we suport two screen sizes:
* value <= 7 a sevel line subscreen
* value > 7 a 16 line subscreen
    ls_subscriber-height = 7.    APPEND ls_subscriber TO re_subscribers.Here, parameter u2018im_elementu2019 is defined as u2018HEADERu2019 as we are adding new tab in header section of PO.
Define a function group and take the main program and define it in ls_subscriber-program.
Also define a sub screen with the required fields and assign it to the parameter ls_subscriber-dynpro.
Then method MAP_DYNPRO_FIELDS
FIELD-SYMBOLS: <mapping> LIKE LINE OF ch_mapping.
    LOOP AT ch_mapping ASSIGNING <mapping>.    CASE <mapping>-fieldname.      WHEN 'ZZPAYMENT_AGRE'.      <mapping>-metafield = mmmfd_cust_03.
      WHEN 'ZZPROJECT'.                     <mapping>-metafield = mmmfd_cust_04.
    ENDCASE. ENDLOOP. TRANSPORT_FROM_MODEL:
DATA:     l_header       TYPE REF TO if_purchase_order_mm,
              ls_mepoheader TYPE mepoheader,
              ls_customer    TYPE CI_EKKODB.*--------------------------------------------------------------------*
* system asks to transport data from the business logic into the view
*--------------------------------------------------------------------*    CASE im_name.      WHEN subscreen1.* is it an Header? im_model can be header or item.
        mmpur_dynamic_cast l_header im_model.
        CHECK NOT l_header IS INITIAL.* transport standard fields
        ls_mepoheader = l_header->get_data( ).* store info for later use
        MOVE-CORRESPONDING ls_mepoheader TO dynp_data_pbo.
      WHEN OTHERS.
    ENDCASE.    TRANSPORT_TO_DYNP:
Define a FM 'ZK_KAU86037_PUSH' to push the values.CASE im_name.      WHEN subscreen1.        CALL FUNCTION 'ZK_KAU86037_PUSH'
          EXPORTING
            im_dynp_data = dynp_data_pbo.      WHEN OTHERS.
    ENDCASE.    TRANSPORT_FROM_DYNP:
Define another FM 'ZK_KAU86037_POP'.CASE im_name.      WHEN subscreen1.        CALL FUNCTION 'ZK_KAU86037_POP'
          IMPORTING
            ex_dynp_data = dynp_data_pai.        IF dynp_data_pai NE dynp_data_pbo.
* something has changed therefore we have to notify the framework
* to transport data to the model
          re_changed = mmpur_yes.
        ENDIF.      WHEN OTHERS.
    ENDCASE. TRANSPORT_TO_MODEL:
        DATA: l_header             TYPE REF TO if_purchase_order_mm,
          ls_mepoheader        TYPE mepoheader,
          ls_customer          TYPE CI_EKKODB,
          l_po_header_handle   TYPE REF TO cl_po_header_handle_mm.*--------------------------------------------------------------------*
* data have to be transported to business logic
*--------------------------------------------------------------------*    CASE im_name.      WHEN subscreen1.* is it an item? im_model can be header or item.
        mmpur_dynamic_cast l_header im_model.
        CHECK NOT l_header IS INITIAL.        ls_mepoheader = l_header->get_data( ).* standard fields changed?
        IF dynp_data_pbo-zzpayment_agre   NE dynp_data_pai-zzpayment_agre
        OR dynp_data_pbo-zzproject        NE dynp_data_pai-zzproject.* update standard fields
          ls_mepoheader-zzpayment_agre   = dynp_data_pai-zzpayment_agre.
          ls_mepoheader-zzproject = dynp_data_pai-zzproject.
          CALL METHOD l_header->set_data
            EXPORTING
              im_data = ls_mepoheader.
        ENDIF.
      WHEN OTHERS.    ENDCASE.
Then we have to implement one more BADI to display the tab and update the values.
Implement the BADI ME_PROCESS_PO_CUST. This cannot be used multiple times.
In this, we have methods (PROCESS_HEADER,PROCESS_ITEM).if we need to any validations for the fields we can write the logic here in this methods. In my case I need to check for the document type which I implemented in the method (PROCESS_HEADER).
Hope it helps you.
Thanks
Arbind

Implementing BADI TRIP_WEB_NUMBER, problem reading a field

Hi All,
Have anyone implemented BADI TRIP_WEB_NUMBER before,
Interface : IF_EX_TRIP_WEB_NUMBER
Method:     USER_EXIT_NUMBER_INTERNAL
I need a help.
In this method i have exporting parameter NUMBER_RANGE TYPE INRI-NRRANGENR
so my requirement is just to change this parameter for particular conditon.
Problem is to make condition i need a field SCHEMA
You can check Structure HEAD_PERIO-SCHEM
or elset T706S OR T706T...
I need to read that field at runtime somehow, how can i achieve that pls help.
i can able to read only the date....
Pls help..
Thanks

Find out the main program name where the variable HEAD_PERIO-SCHEMA is declared. Then you can use the ABAP call stack method to retrieve the variable like below. This method can only be used to read a variable from ABAP call stack memory, that is the variable should be available in the scope of the program which is present in the run time call stack your BADI gets called in.
DATA: lv_name_xvbak(30) VALUE   '(SAPMV45A)VBAK'.
FIELD-SYMBOLS: <xvbak> TYPE vbak.
* Retrieve Sales order details from abap stack
ASSIGN (lv_name_xvbak) TO <xvbak>.
IF sy-subrc NE 0.
EXIT.
ENDIF.
In the above code you can replace SAPMV45A with the main program name where field SCHEMA is available and VBAK with HEAD_PERIO (the structure or internal table where the field you want is available)
For accessing internal tables similarly
DATA: lv_name_xvbap(30) VALUE   '(SAPMV45A)XVBAP[]'.
FIELD-SYMBOLS: <xvbap> TYPE TABLE OF vbap.
ASSIGN (lv_name_xvbap) TO <xvbap>.
IF sy-subrc NE 0.
EXIT.
ENDIF.

Implementing BADI

Hi,
How to implement BADI?
I want to Implement Badi for t.code FBL3N .
In This i need to update BSEG table.
please give me solution
Edited by: Santhosh on Jan 22, 2008 4:50 PM

Business Add-Ins
Business Add-Ins are a new SAP enhancement technique based on ABAP Objects. They can be inserted into the SAP System to accommodate user requirements too specific to be included in the standard delivery. Since specific industries often require special functions, SAP allows you to predefine these points in your software.
As with customer exits (SMOD/CMOD Page 40), two different views are available:
In the definition view, an application programmer predefines exit points in a source that allow specific industry sectors, partners, and customers to attach additional software to standard SAP source code without having to modify the original object.
In the implementation view, the users of Business Add-Ins can customize the logic they need or use a standard logic if one is available.
In contrast to customer exits, Business Add-Ins no longer assume a two-system infrastructure (SAP and customers), but instead allow for multiple levels of software development (by SAP, partners, and customers, and as country versions, industry solutions, and the like). Definitions and implementations of Business Add-Ins can be created at each level within such a system infrastructure.
SAP guarantees the upward compatibility of all Business Add-In interfaces. Release upgrades do not affect enhancement calls from within the standard software nor do they affect the validity of call interfaces. You do not have to register Business Add-Ins in SSCR.
The Business Add-In enhancement technique differentiates between enhancements that can only be implemented once and enhancements that can be used actively by any number of customers at the same time.
In addition, Business Add-Ins can be defined according to filter values. This allows you to control add-in implementation and make it dependent on specific criteria (on a specific Country value, for example). All ABAP sources, screens, GUIs, and table interfaces created using this enhancement technique are defined in a manner that allows customers to include their own enhancements in the standard.
A single Business Add-In contains all of the interfaces necessary to implement a specific task. In Release 4.6A, program and menu enhancements can be made with Business Add-Ins. The actual program code is enhanced using ABAP Objects. In order to better understand the programming techniques behind the Business Add-In enhancement concept, SAP recommends reading the section on ABAP Objects
DEFINING THE BADI
1) execute Tcode SE18.
2) Specify a definition Name : ZBADI_SPFLI
3) Press create
4) Choose the attribute tab. Specify short desc for badi.. and specify the type :
multiple use.
5) Choose the interface tab
6) Specify interface name: ZIF_EX_BADI_SPFLI and save.
7) Dbl clk on interface name to start class builder . specify a method name (name,
level, desc).
Method level desc
Linese;ection instance methos some desc
8) place the cursor on the method name desc its parameters to define the interface.
Parameter type refe field desc
I_carrid import spfli-carrid some
I_connid import spefi-connid some
9) save , check and activateadapter class proposed by system is
ZCL_IM_IM_LINESEL is genereated.
IMPLEMENTATION OF BADI DEFINITION
1) EXECUTE tcode se18.choose menuitem create from the implementation menubar.
2) Specify aname for implementation ZIM_LINESEL
3) Specify short desc.
4) Choose interface tab. System proposes a name fo the implementation class.
ZCL_IM_IMLINESEL which is already generarted.
5) Specify short desc for method
6) Dbl clk on method to insert code..(check the code in AAA).
7) Save , check and activate the code.
Some useful URL
http://www.esnips.com/doc/e06e4171-29df-462f-b857-54fac19a9d8e/ppt-on-badis.ppt
http://www.esnips.com/doc/10016c34-55a7-4b13-8f5f-bf720422d265/BADIs.pdf
http://www.esnips.com/doc/43a58f51-5d92-4213-913a-de05e9faac0d/Business-Addin.doc
http://www.esnips.com/doc/1e10392e-64d8-4181-b2a5-5f04d8f87839/badi.doc
www.sapgenie.com/publications/saptips/022006%20-%20Zaidi%20BADI.pdf
http://www.sapdevelopment.co.uk/enhance/enhance_badi.htm
http://help.sap.com/saphelp_nw04/helpdata/en/04/f3683c05ea4464e10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/e6/d54d3c596f0b26e10000000a11402f/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/c2/eab541c5b63031e10000000a155106/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f3202186-0601-0010-6591-b832b1a0d0de
Now write a sample program to use this badi method..
Look for BBB sample program.
AAA
data : wa_flights type sflight,
it_flights type table of sflight.
format color col_heading.
write:/ 'Flight info of:', i_carrid, i_connid.
format color col_normal.
select * from sflight
into corresponding fields of table it_flights
where carrid = i_carrid
and connid = i_connid.
loop at it_flights into wa_flights.
write:/ wa_flights-fldate,
wa_flights-planetype,
wa_flights-price currency wa_flights-currency,
wa_flights-seatsmax,
wa_flights-seatsocc.
endloop.
BBB
*& Report ZBADI_TEST *
REPORT ZBADI_TEST .
tables: spfli.
data: wa_spfli type spfli,
it_spfli type table of spfli with key carrid connid.
*Initialise the object of the interface.
data: exit_ref type ref to ZCL_IM_IM_LINESEL,
exit_ref1 type ref to ZIF_EX_BADISPFLI1.
selection-screen begin of block b1.
select-options: s_carr for spfli-carrid.
selection-screen end of block b1.
start-of-selection.
select * from spfli into corresponding fields of table it_spfli
where carrid in s_carr.
end-of-selection.
loop at it_spfli into wa_spfli.
write:/ wa_spfli-carrid,
wa_spfli-connid,
wa_spfli-cityfrom,
wa_spfli-deptime,
wa_spfli-arrtime.
hide: wa_spfli-carrid, wa_spfli-connid.
endloop.
at line-selection.
check not wa_spfli-carrid is initial.
create object exit_ref.
exit_ref1 = exit_ref.
call method exit_ref1->lineselection
EXPORTING
i_carrid = wa_spfli-carrid
i_connid = wa_spfli-connid.
clear wa_spfli.
Regards

Implementing BADIs CFX_STATUS_TRANS and CFX_STATUS_TRANS_UI

How would I go about implementing BADIs CFX_STATUS_TRANS and CFX_STATUS_TRANS_UI? I have never used a BADI before but I have read documentation on implementing BADIs. One example of such is https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d0456c54-0901-0010-f0b3-cd765fb99702
What would I need to do to use either of these BADIs? Specifially, I will need to
Get Project Details such as Description, Dates, etc and return these to cFolders for population in the Document
Get Project Partner details such as Names, addresses, email addresses etc for selection and population
Is it possible in these BADIs? I was asked to begin with the two BADIs that I listed above but I am unsure how they will help.
Regards,
Davis

Hi Davis,
If you run the transaction SE18 using the Badi you mentioned, click of 'Display', then you will find a button 'Document', which you can find out, which purpose has the involved Badi.
Kind regards,
Zhenbo

How to get detail info of application acknowledgement in BPM send step

Hello
in BPM we will send an async message to SAP backend system, we need to know if the message is successfully process or not, if not, we need to get the detail info which is returned in the acknowledgement message.
As you know in PI monitor, you can open the acknowledgement message and you can see the error texts that are sent by the SAP backend system to PI in the acknowledgement message. However seems like there is no standard way in PI BPM to get the error texts inside the acknowledgement. In the send step you can only specify that application ACK is required, if negative ACK comes in, an exception is raised and you can handle the exception in the exception branch. However there is nowhere to capture the acknowledgement message to get the detail error texts.
Anyone has good idea to get the error texts from the application acknowledgment message inside BPM/
Thanks

we need to know if the message is successfully process or not, if not, we need to get the detail info which is returned in
the acknowledgement message
One way to have the above requirement done is make the process synchronous (if RFC/ Proxy). The response message should contain the state of processing of the message inside SAP....now in the BPM make a check on the response message to see if it is a success or failure....you can apply logic like is success terminate the BPM without any alert.....if failure raise an alert/ send a mail.
Regards,
Abhishek.

How to get more detailed info while running a BAPI in test mode

Hi friends
I am trying to test 'BAPI_QUOTATION_CREATEDATA2' by opening the BAPI with 'se37' and then clicking on the button Test/Execute (F8) and entering all the data required.
However, I get a message as follows.
'555 The sales document is not yet complete: Edit data'
While creating the QUOTE manually using 'va21' I get more detailed messages like what kind of data is missing 'whether valid to date is missing ..etc.etc.'.
However, while testing thro' bapi, all it says is that sales document is not complete.
Is there a way to see more detailed info as to what information is missing, so that I can put them before running.
Your feedback or suggesions will be highly appreciated.
Thansk
Ram

Thanks Rob
Actually it says
W V1 555 The sales document is not yet complete: Edit data.
As I said, I am running the BAPI manually by opening the BAPI using SE37 and then clicking on the F8 button. This inreturn will give me an opportunity to click on different object trees to enter the sample data. So I have entered everything that I thought was needed. But still it keeps complaining that the info is not complete but no further details.
Hope there is some log file or something that I can see to get more details.
Thanks
Ram

DVD detailed Info- software comparable for the mac

I need to help someone and need some detailed info a some DVds they gave me. Is there mac software to show details like this PC software here:
http://www.videohelp.com/tools/GSpot
Or how do I do the same thing on a mac? Get info isnt much help. Im new to this.

If you want to find out what CODECS are used in audio and video files you have, simply open the Apple Quicktime Player and then drag the file you want information about to the Quicktime Player icon in the dock. Then select WINDOW>SHOW MOVIE INSPECTOR (this is for the Quicktime X Player - older versions are slight different).
need some detailed info a some DVds
DVDs all use mpg-2 video encoding.

Need detailed information about u0093CALL CUSTOMER FUNCTIONu0094.

Need detailed information about CALL CUSTOMER FUNCTION.

Hello Ayan
CALL CUSTOMER FUNCTION. is the old version of
customer exits. Using transaction SMOD you can see which customer exits SAP provides. Using transaction CMODyou can see the enhancement projects which make use of these SAP enhancements.
SAP enhancements consist of different components: function modules, screens, etc.
For example, SAP enhancement CATS0001has a single component, function module EXIT_SAPLCATS_001. This function module is called within include LCATSF54:
*&      Form READ_WORKLIST_FROM_EXIT
*       Read worklist from customer exit                               *
FORM read_worklist_from_exit.
DATA: l_catsw TYPE catsw_tab.        "XZQAL0K061795
*----------------Beginn XZQPL0K017888----------------
DATA: l_icatsw_fix LIKE catsw OCCURS 0.          "XZQPL0K017888
* Sichern der ICATSW_FIX, damit mögliche Änderungen aus
* User-Exit/Badi rückgängig gemacht werden können.
l_icatsw_fix = icatsw_fix.
*----------------Ende XZQPL0K017888----------------
CALL CUSTOMER-FUNCTION '001'
       EXPORTING
            sap_tcats      = tcats
            sap_pernr      = catsfields-pernr
            sap_dateleft   = catsfields-dateleft
            sap_dateright = catsfields-dateright
            sap_datefrom   = catsfields-datefrom    "XZQPL0K017888
            sap_dateto     = catsfields-dateto      "XZQPL0K017888
       TABLES
            sap_icatsw     = icatsw
            sap_icatsw_fix = l_icatsw_fix           "XZQPL0K017888
       EXCEPTIONS
            OTHERS        = 1.
*-------------Beginn XZQAL0K061795 Worklist-Badi in CATS -------
IF badi_worklist IS INITIAL.
    CALL METHOD cl_exithandler=>get_instance   "Aufruf der Factory-
       CHANGING instance = badi_worklist.      "Methode
ENDIF.
l_catsw = icatsw[].
* Restaurieren der l_icatsw_fix für das Badi, falls sie
* doch im User-Exit geändert worden ist.
l_icatsw_fix = icatsw_fix.                  "XZQPL0K017888
CALL METHOD badi_worklist->get_worklist    "Aufruf des Add-Ins
    EXPORTING
      sap_tcats      = tcats
      sap_pernr      = catsfields-pernr
      sap_dateleft   = catsfields-dateleft
      sap_dateright = catsfields-dateright
      sap_datefrom   = catsfields-datefrom    "XZQPL0K017888
      sap_dateto     = catsfields-dateto      "XZQPL0K017888
    CHANGING
      sap_icatsw     = l_catsw
      sap_icatsw_fix = l_icatsw_fix.          "XZQPL0K017888
icatsw[] = l_catsw.
*-------------Ende XZQAL0K061795 Worklist-Badi in CATS -------
ENDFORM.                               " READ_WORKLIST_FROM_EXIT
In this routine you can see the most up-to-date version of customer exits:
BAdIs (Business AddIns). Inbetween SAP has developed BTEs(transaction FIBF) which are basically dynamically called function modules.
Regards
Uwe

Need Detailed Info On Implementing BADI HRPAD00INFTYUI

Similar Messages

Maybe you are looking for