Need details about Satellite S35DVD and memory upgrade

I've got a used Toshiba Satellite S35DVD Notebook from a friend.
Unfortunately I have no infromation about this notebook and there's also no information on the web available.
The Toshiba Support sites also don't knwo this kind of notebook.
Anybody out there who can give me some information, links for w2k drivers, tech specs, ...
Most interesting for me is the max supported ram size for upgrade.
tia

Are you sure that this is a Satellite S35DVD?
Check the labels at the bottom of the unit. There should be a model number or series number. This would be interesting

Similar Messages

HT6114 hello .. i am using mavericks OS and it is showing it needs updates about 800 meg. and every time i download that it dosent do anything and again it is beginig to download again and again that.. please help me. the update is 10.9.2

hello .. i am using mavericks OS and it is showing it needs updates about 800 meg. and every time i download that it dosent do anything and again it is beginig to download again and again that.. please help me. the update is 10.9.2

To answer the post title FireFox save all downloads automatically in the download folder, which you can find in the Documents folder. If you want to choose where to save your downloads go to tools>options>check always ask me where to save files.
Secondly, I am assuming you have IE 8 installed as this is the only version that supports this fix that is currently not in beta. Go to control panel>internet options>advanced tab and reset the settings at the bottom. This may or may not fix the problem but it is a good first step.

HDD and memory upgrade on Satellite A350

Hi All
I have a satellite a350 laptop can anyone tell me whats the biggest harddrive I can have and memory please
Thanks

Hi
The RAM upgrade depends on the available chipset.
Not quite sure about your A350-xxx model but many of the Sat A350 notebooks were quipped with an Intel GM45 Express chipset and in such case you could upgrade the memory max up to 8GB RAM
Regarding the HDD: This notebook supports SATA HDD. This mean that you are not limited to an special size.
Theoretically it could be possible to use 500GB, 750GB 2.5 SATA HDDs

Need details about ECC upgrade

Hi Gurus,
Greetings..
Need help on ECC upgrade
We are currently on 4.0B system and upgrading to ECC 6.0
Need details on the following
1.) Can we directly upgrade from 4.0 to 6.0
2.) What will be the system details ( like database os etc)
Thanks in Advance
Gopi

Hi Gopi,
according to SAP Product Availability Matrix you can upgrade directly from 4.0B system. Please check the link below:
https://service.sap.com/sap/support/pam?hash=pvnr%3D01200615320900001296%26pt%3Dg%257Cr
Please activate the check marks on the left side (pressing below link) to get an overview about supported OS/DB combination:
https://service.sap.com/sap/support/pam?hash=pvnr%3D01200615320900001296%26pt%3Dt%257CPLTFRM%26ainstnr%3D012006153249000…
Cheers,
Andreas

Could you pls give the details about the Unicode conversion during Upgrade

Hi,
Can anyone give details about the Unicode conversion during SAP Upgradation fro 4.6C to ECC6.
Waiting for quick response
Best Regards,
Padhy

Hi,
These are the few points i gathered during my upgradation project.
Before starting any upgradation project, it is necessary to take up the back-up of the existing systems. As we are going to upgrade the entire system, we will be changing so many things and if something happens, without back-up, we will be in a trouble.
So it is advised to keep a back-up of the existing system.
Say for example we have the existing system E4B which is of Version 4.6C. Now we want to upgrade it to Version 4.7. Let us see how we can do it.
Version upgrades not only means that we need to run the new Version CD over the existing Version System but only involves some other thing.
Version Upgrade involves the following Steps.
Say we want to upgrade for Version 4.7 from Version 4.6, which is in the System E4B. Now we created one more system called as E1B in which the upgradation for Version 4.7 can be done.
First copy the entire E4B system into the E1B System which is created for Version 4.7.
Apply the Version 4.7 CD provided by SAP over the E1B System.
Now check whether all the functionalities that was in E4B system works fine with E1B system also.
Thus the Version Upgrade involves two steps.
1. SAP Upgradation with the help of the CD
2. Manual Upgradation.
1. SAP Upgradation with the help of the CD
This is nothing but after taking the copy of the existing system into a new system, the upgradation CD from SAP is applied over the new system.
2. Manual Upgradation.
This Manual Upgradation involves
2.1 Upgradation of Standard Objects
2.1.1 SPAU Objects
2.1.2 SPDD Objects
2.2 Upgradation of Custom Objects.
Upgradation of Custom Objects can be placed under the following three categories.
Unicode Compliance
Retrofit
Upgrade
Please Find below some of the common Unicode Errors and their solutions
1. Error:
In case of Translate Error; Dangerous use of Translate in Multilingual system.
Correction:
To correct the Error occurring on TRANSLATE statement use this additional statement before the Translate statement.
SET LOCALE LANGUAGE sy-langu.
This statement defines the Text Environment of all the programs & internal sessions in the language specified in the LANGUAGE KEY, which in this case is sy-langu, i.e. the log on language of the user.
2. Error:
In case of Open Dataset Error; Encoding Addition must be included.
Correction:
This Error occurs only when the MODE is TEXT.
To correct the Error occurring on OPEN DATASET statement use this statement instead.
OPEN DATASET dataset_name FOR access IN TEXT MODE ENCODING DEFAULT.
Where: dataset_name NAME OF THE DATASET.
Access INPUT or OUTPUT or APPENDING or UPDATE.
DEFAULT - Corresponds to UTF-8 in UNICODE systems &
NON_UNICODE in NON-UNICODE systems.
3. Error:
In case of the usage of the Obsolete FM UPLOAD/DOWNLOAD or WS_UPLOAD/DOWNLOAD; Function module UPLOAD is flagged as obsolete.
Correction:
The FM GUI_DOWNLOAD/UPLOAD is used.
The variations to be made in the parameters of the FM:
1. Filename It must be of STRING type.
2. Filetype DAT is not used any longer, instead ASC is used.
3. Field Separator The default value SPACE is used, incase for a TAB separated file X can be used.
4. Error:
In case of CURRENCY/UNIT Addition Error; Use addition CURRENCY/UNIT when outputting.
Correction:
The CURRENCY addition specifies the currency-dependant decimal places for the output of the data objects of type i or p. To obtain the currency-key, the field CURRKEY of the table TCURX is used. The system determines the number of the decimal places from the field CURRDEC of the selected CURRKEY.
To correct this error follow the following method:
WRITE: /3 'TOTAL',' ', TOTAL.
WRITE: /3 TOTAL, , TOTAL CURRENCY 2. --- Where 2is the Currency Key for Getting 2 decimal places.
5. Error:
In case of TYPE X Error; Variable must be of C, N, D, T or STRING type.
Correction:
We need to change all the Type X (Hexadecimal) variables to Type C with their values unchanged.
So the method to be followed is:-
1. Load the definition of the class CL_ABAP_CONV_IN_CE or CL_ABAP_CHAR_UTILITIES.
2. Declare the variable as Type C, and use the method UCCP(XXXX) of the class CL_ABAP_CONV_IN_CE where XXXX represents the 8-bit Hexadecimal value and incase the variable holds a Hex value for a Horizontal Tab , then the Attribute HORIZONTAL_TAB of the class CL_ABAP_CHAR_UTILITIES can be used directly instead of using the method UCCP.
E.g.:
i) *DATA: TAB TYPE X VALUE 09, Tab character
CLASS: CL_ABAP_CHAR_UTILITIES DEFINITION LOAD.
DATA TAB TYPE C VALUE CL_ABAP_CHAR_UTILITIES=>HORIZONTAL_TAB.
ii) * DATA: CHAR TYPE X VALUE 160.
CLASS: CL_ABAP_CONV_IN_CE DEFINITION LOAD.
DATA CHAR TYPE C.
CHAR = CL_ABAP_CONV_IN_CE=>UCCP(00AO).
(Here 00A0 is the Hexadecimal equivalent of the decimal 160).
3. Incase the TYPE X Variable has a length more than 1, then an internal table must be created for the variable.
E.g.:
CLASS: CL_ABAP_CONV_IN_CE DEFINITION LOAD.
DATA : LF(2) TYPE X VALUE 'F5CD'.
DATA : BEGIN OF LF,
A1 TYPE C,
A2 TYPE C,
END OF LF.
LF-A1 = CL_ABAP_CONV_IN_CE=>UCCP('00F5').
LF-A2 = CL_ABAP_CONV_IN_CE=>UCCP('00CD').
6. Error:
In case of the Character -Error; The Character -cant appear in names in Unicode Programs.
Correction:
The Character -(Hyphen) appearing in Variable names is replaced by the character _ (Under Score) for Unicode/Upgrade Compliance.
E.g.:
*wk-belnr LIKE bkpf-belnr,
*wk-xblnr LIKE bkpf-xblnr,
*wk-date LIKE sy-datum,
*wk-wrbtr LIKE bseg-wrbtr,
*wk-name1 LIKE lfa1-name1,
*wk-voucher(8) TYPE c.
wk_belnr LIKE bkpf-belnr,
wk_xblnr LIKE bkpf-xblnr,
wk_date LIKE sy-datum,
wk_wrbtr LIKE bseg-wrbtr,
wk_name1 LIKE lfa1-name1,
wk_voucher(8) TYPE c.
7. Error:
In case of The SUBMIT-TO-SAP-SPOOL Error; you should not use the statement SUBMIT-TO-SAP-SPOOL without the WITHOUT SPOOL DYNPRO addition.
Correction:
1. Declare variables of type PRI_PARAMS, ARC_PARAMS, and a variable of TYPE C which would be used as a VALID FLAG.
2. Call the FM GET_PRINT_PARAMETERS:
CALL FUNCTION 'GET_PRINT_PARAMETERS'
EXPORTING
ARCHIVE_MODE = '3'
DESTINATION = P_DEST
IMMEDIATELY = 'X'
IMPORTING
OUT_ARCHIVE_PARAMETERS = archive_parameters
OUT_PARAMETERS = print_parameters
VALID = valid_flag
EXCEPTIONS
INVALID_PRINT_PARAMS = 2
OTHERS = 4
3. Use the SUBMIT-TO-SAP-SPOOL statement.
E.g.:
     submit zrppt500
     using selection-set 'AUTO3'
     with res_no eq lo_rsnum
     with sreserv in preserv
     to sap-spool destination p_dest
     immediately 'X'. "print immediate
DATA: print_parameters type pri_params,
archive_parameters type arc_params,
valid_flag(1) type c.
CALL FUNCTION 'GET_PRINT_PARAMETERS'
EXPORTING
ARCHIVE_MODE = '3'
DESTINATION = P_DEST
IMMEDIATELY = 'X'
IMPORTING
OUT_ARCHIVE_PARAMETERS = archive_parameters
OUT_PARAMETERS = print_parameters
VALID = valid_flag
EXCEPTIONS
INVALID_PRINT_PARAMS = 2
OTHERS = 4
Submit zrppt500
Using selection-set 'AUTO3'
With res_no eq lo_rsnum
with sreserv in preserv
to sap-spool
SPOOL PARAMETERS PRINT_PARAMETERS
ARCHIVE PARAMETERS ARCHIVE_PARAMETERS
WITHOUT SPOOL DYNPRO.
8. Error:
In case of Message Error; Number of WITH fields and number of Place Holders are not same .
Correction:
Split the statement after WITH into the same number as the place holder for that Message ID.
E.g.:
1. * MESSAGE E045.
MESSAGE E045 WITH '' ''.
2. in program ZIPI0801
     Start of change for ECC6
     message e398(00) with 'Could not find access sequence'
     'for condition type:'
     p_ptype.
message e398(00) with 'Could not find '
'access sequence'
'for condition type:'
p_ptype.
     End of change made for ECC6
9. Error:
In case of Move between 2 different Structures; The structures are not mutually convertible in a Unicode program.
Correction:
Make both the Data Types compatible and then assign the contents.
E.g.:
The statement move retainage_text to temp_text. Gives an error, where RETAINAGE_TEXT is an internal table and TEMP_TEXT is a string of length 200.
A Feasible solution for this is to specify from which position to which position of the string, the fields of RETAINAGE_TEXT should be assigned.
TEMP_TEXT+0(1) = RETAINAGE_TEXT-DQ1.
TEMP_TEXT+1(1) = RETAINAGE_TEXT-HEX.
TEMP_TEXT+2(20) = RETAINAGE_TEXT-FILLER1.
TEMP_TEXT+22(15) = RETAINAGE_TEXT-AMT_DUE.
TEMP_TEXT+37(8) = RETAINAGE_TEXT-TEXT.
TEMP_TEXT+45(10) = RETAINAGE_TEXT-DUE_DATE.
TEMP_TEXT+55(1) = RETAINAGE_TEXT-DQ2.
10. Error:
In case of no description found; add a GUI title.
Correction:
In this type of error gui title is generally missing so add a GUI title to the module pool.
11. Error:
In case of writing internal or transparent table
Correction:
Write individual fields.
E.g.:
WRITE: / EXT. --> EXT should be a character type field
WRITE: / EXT-ZZSTATE, EXT-LINE_NO, EXT-LINE_TXT, EXT-AMT, EXT-ZZSKUQTY.
12. Error:
In case of combination reference table/field S541-UMMENGE does not exist
Correction:
Was due to error in reference table S541. TABLE S541 has errors
1)Foreign key S541- ZZMARKET (ZZMARKET AND KATR2 point to different domains)
2)Foreign key S541-ZZACQUIGRP (ZZACQUIGRP AND KATR8 point to different domains)
Changed the domain of ZZMARKET (from ZMKCODE to ATTR2)
And that of ZMKCODE (from ZACCODE to ATTR8)
13. Error:
In case of KEY does not exist
Correction:
The reference table for field KBETR was KNOV earlier changed it to RV61A as KNOV was in turn referring to RV61A.
14. Error:
Incase of WRITE statement, Literals that take more than one line is not permitted in Unicode systems.
Correction: To correct this error, we need to align the spaces accordingly so that the statement doesnt go beyond the line.
15. Error:
Incase of Data statement, The data type ZWFHTML can be enhanced in any way. After a structure enhancement, this assignment or parameter might be syntactically incorrect..
Correction: To correct this error, instead of like in the Data statement, use type.
16. Error:
Incase of DESCRIBE statement, DESCRIBE can be used only with IN BYTE... Or IN CHARACTER mode in Unicode systems.
Correction: To correct this error, use additional text, IN BYTE MODE / IN CHARACTER MODE along with this statement.
CHARACTER MODE is added when the data object is of flat/ character type.
BYTE MODE is added when the data object is a deep structure.
Syntax: DESCRIBE FIELD data_obj : LENGTH blen IN BYTE MODE,
LENGTH clen IN CHARACTER MODE.
Where blen and clen must be of type I.
17. Error:
Incase of DO-LOOP Error, In Do loop range addition needed
Correction:
An internal tables is declared and the two fields (VARYING field and NEXT field) were
Included inside the internal table
E.g.: In program SAPMZP02
DO 11 TIMES
     VARYING STATION_STATE FROM STATION1 NEXT STATION2. ECC6
CASE SYST-INDEX.
WHEN 1
STATION_STATE = STATION1.
WHEN 2
STATION_STATE = STATION2.
WHEN 3
STATION_STATE = STATION3.
WHEN 4
STATION_STATE = STATION4.
WHEN 5
STATION_STATE = STATION5.
WHEN 6
STATION_STATE = STATION6.
WHEN 7
STATION_STATE = STATION7.
WHEN 8
STATION_STATE = STATION8.
WHEN 9
STATION_STATE = STATION9.
WHEN 10
STATION_STATE = STATION10.
WHEN 11
STATION_STATE = STATION11.
18. Error:
Incase of the parameter QUEUE-ID Error, QUEUE-ID is neither a parameter nor a select option in program rsbdcbtc.
Correction:
The parameter in program rsbdcbtc is QUEUE_ID and so is changed in this program
E.g.: In program Z_CARRIER_EDI_INTERFACE
     submit rsbdcbtc with queue-id = apqi-qid and return. "ECC6
     The parameter name changed by replacing '-' with '_' as in program rsbdcbtc "ECC6
Submit rsbdcbtc with queue_id = apqi-qid and return. "ECC6
19. Error:
Incase of EPC Error, Field symbol <TOT_FLD> is not assigned to a field .
Correction:
This error couldn't be rectified as the error occurs in a Standard SAP include- LSVIMF29.
The OS Note - 1036943 needs to be applied.
Error:
OPEN DATASET P_FILE FOR OUTPUT IN TEXT MODE.
Correct:
OPEN DATASET P_FILE FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
Error:
Constants : c_tab type x value '09' .
Correct:
Constants : c_tab type abap_char1 value cl_abap_char_utilities=>horizontal_tab .
Error:
Data : begin of output_options occurs 0 . Include structure ssfcompop.
Data : end of output_options .
Correct:
Data : output_options type standard table of ssfcompop with header line .
Error:
PARAMETERS : NAST TYPE NAST .
Correct:
PARAMETERS : NAST TYPE NAST NO-DISPLAY .
Replace WS_DOWNLOAD and WS_UPLOAD by
GUI_UPLOAD and GUI_DOWNLOAD and check the import and export parameter types , do the changes accordingly. Because FILENAME paramater type is different because of this it will give dump.
For issue during Issue using SO_NEW_DOCUMENT_ATT_SEND_API1 Function module, the solution is After this FM we should put COMMIT WORK.
Issue:
Moving data from one structure to another structure if those two structures are not compatible
Solution:
we should use move-corresponding or field by filed we need to move it.
If database structures are different in 4.6c and ECC6.0,
Then we should go with append structure concept.
While testing the report if it gives dump at Select query level or any database or view level,then just goto that table or view and goto the data base utility(se14) adjust the database. But make sure that selected radio button in se14 transaction should be activate and adjust database
Also Check this link.
http://help.sap.com/saphelp_nw04/helpdata/en/62/3f2cadb35311d5993800508b6b8b11/frameset.htm
Reward points if helpful.
Regards,
Ramya

Need details about "Lock Profiling" tab of JRockit JRA

Hi,
I'm experimenting with the JRockit JRA tool: I think this is a very useful tool ! It provides very valuable information.
About locks ("Lock Profiling" tab), since JRockit manages locks in a very sophisticated manneer, it enables to get very important information about which monitors are used by the application, helping for improving the performances.
Nevertheless, the BEA categories (thin/fat, uncontended/contended, recursive, after sleep) are not so clear. A short paper explaining what they mean would greatly help.
Fat contended monitors cost the most, but maybe 10000 thin uncontended locks cost the same as 1 fat contended lock does. We don't know.
So, there is a lack of information about the cost (absolute: in ms, or relative: 1 fat lock costs as N thin locks) of each kind of monitor. This information would dramaticaly help people searching where improvements of lock management are required in their application.
Thanks,
Tony

great explanation! Thanks
"ihse" <[email protected]> wrote in message
news:18555807.1105611467160.JavaMail.root@jserv5...
About thin, fat, recursive and contended locks in JRockit:
Let's start with the easiest part: recursive locks. A recursive lock
occurs in the following scenario:synchronized(foo) { // first time thread takes lock
synchronized(foo) { // this time, the lock is taken recursively
}The recursive lock taking may also occur in a method call several levels
down - it doesn't matter. Recursive locks are not neccessarily any sign of
bad programming, at least not if the recursive lock taking is done by a
separate method.
The good news is that recursive lock taking in JRockit is extremely fast.
In fact, the cost to take a lock recursively is almost negligable. This is
regardless if the lock was originally taken as a thin or a fat lock
(explained in detail below).
Now let's talk a bit about contention. Contention occurs whenever a thread
tries to take a lock, and that lock is not available (that is, it is held
by another thread). Let me be clear: contention ALWAYS costs in terms of
performance. The exact cost depends on many factors. I'll get to some more
details on the costs later on.
So if performance is an issue, you should strive to avoid contention.
Unfortunately, in many cases it is not possible to avoid contention -- if
you're application requires several threads to access a single, shared
resource at the same time, contention is unavoidable. Some designs are
better than others, though. Be careful that you don't overuse
synchronized-blocks. Minimize the code that has to be run while holding a
highly-contended lock. Don't use a single lock to protect unrelated
resources, if that lock proves to be easily contended.
In principle, that is all you can do as an application developer: design
your program to avoid contention, if possible. There are some experimental
flags to change some of the JRockit locking behaviour, but I strongly
discourage anyone from using these. The default values is carefully
trimmed, and changing this is likely to result in worse, rather than
better, performance.
Still, I understand if you're curious to what JRockit is doing with your
application. I'll give some more details about the locking strategies in
JRockit.
All objects in Java are potential locks (monitors). This potential is
realized as an actual lock as soon as any thread enters a synchronized
block on that object. When a lock is "born" in this way, it is a kind of
lock that is known as a "thin lock". A thin lock has the following
characteristics:
* It requires no extra memory -- all information about the lock is stored
in the object itself.
* It is fast to take.
* Other threads that try to take the lock cannot register themselves as
contending.
The most costly part of taking a thin lock is a CAS (compare-and-swap)
operation. It's an atomic instruction, which means as far as CPU
instructions goes, it is dead slow. Compared to other parts of locking
(contention in general, and taking fat locks in specific), it is still
very fast.
For locks that are mostly uncontended, thin locks are great. There is
little overhead compared to no locking, which is good since a lot of Java
code (especially in the class library) use lot of synchronization.
However, as soon as a lock becomes contended, the situation is not longer
as obvious as to what is most efficient. If a lock is held for just a very
short moment of time, and JRockit is running on a multi-CPU (SMP) machine,
the best strategy is to "spin-lock". This means, that the thread that
wants the lock continuously checks if the lock is still taken, "spinning"
in a tight loop. This of course means some performance loss: no actual
user code is running, and the CPU is "wasting" time that could have been
spent on other threads. Still, if the lock is released by the other
threads after just a few cycles in the spin loop, this method is
preferable. This is what's meant by a "contended thin lock".
If the lock is not going to be released very fast, using this method on
contention would lead to bad performance. In that case, the lock is
"inflated" to a "fat lock". A fat lock has the following characteristics:
* It requeries a little extra memory, in terms of a separate list of
threads wanting to acquire the lock.
* It is relatively slow to take.
* One (or more) threads can register as queueing for (blocking on) that
lock.
A thread that encounters contention on a fat lock register itself as
blocking on that lock, and goes to sleep. This means giving up the rest of
its time quantum given to it by the OS. While this means that the CPU will
be used for running real user code on another thread, the extra context
switch is still expensive, compared to spin locking. When a thread does
this, we have a "contended fat lock".
When the last contending thread releases a fat lock, the lock normally
remains fat. Taking a fat lock, even without contention, is more expensive
than taking a fat lock (but less expensive than converting a thin lock to
a fat lock). If JRockit believes that the lock would benefit from being
thin (basically, if the contention was pure "bad luck" and the lock
normally is uncontended), it might "deflate" it to a thin lock again.
A special note regarding locks: if wait/notify/notifyAll is called on a
lock, it will automatically inflate to a fat lock. A good advice (not only
for this reason) is therefore not to mix "actual" locking with this kind
of notification on a single object.
JRockit uses a complex set of heuristics to determine amongst other
things:
* When to spin-lock on a thin lock (and how long), and when to inflate it
to a fat lock on contention.
* If and when to deflate a fat lock back to a thin lock.
* If and when to skip on the fairness on a contended fat lock to improve
performance.
These heuristics are dynamically adaptive, which means that they will
automatically change to what's best suited for the actual application that
is being run.
Since the switch beteen thin and fat locks are done automatically by
JRockit to the kind of lock that maximizes performance of the application,
the relative difference in performance between thin and fat locks
shouldn't really be of any concern to the user. It is impossible to give a
general answer to this question anyhow, since it differs from system to
system, depending on how many CPU:s you have, what kind of CPU:s, the
performance on other parts of the system (memory, cache, etc) and similar
factors. In addition to this, it is also very hard to give a good answer
to the question even for a specific system. Especially tricky is it to
determine with any accuracy the time spent spinning on contended thin
locks, since JRockit loops just a few machine instuctions a few times
before giving up, and profiling of this is likely to heavily influence the
time, giving a skewed image of the performance.
To summarize:
If you're concerned about performance, and can change your program to
avoid contention on a lock - then do so. If you can't avoid contention,
try to keep the code needed to run contended to a minimum. JRockit will
then do whatever is in its power to run your progam as fast as possible.
Use the lock information provided by JRA as a hint: fat locks are likely
to have been contended much or for a long time. Put your effort on
minimizing contention on them.

Hard Drive and memory upgrade on macbook pro (13" mid 2009)

I want to upgrade my current hard drive and memory (currently 250gb and 4 gb) but i'm having trouble to find out which one is going to fit.
I considered buying this ones
http://www.bestbuy.com/site/Western+Digital+-+Scorpio+Blue+1TB+Internal+Serial+A TA+Hard+Drive+for+Laptops/9960668.p?skuId=9960668&productCategoryId=pcmcat189600 050008&id=1218253425468
http://www.bestbuy.com/site/Kingston+Technology+-+4GB+PC3-8500+DDR3+SoDIMM+Lapto p+Memory/2129381.p?skuId=2129381&productCategoryId=abcat0506002&id=1218404812331
Any ideas?

OWC is a reputable supplier of hard drives and RAM upgrades to the Mac community.
Go to their site, lookup your model MacBook Pro and see what upgrades are available.
The 1tb WD Scorpio Blue is a 5400rpm drive and slower than the crop of 7200rpm drives.
Do you need space over speed?

13" MacBook Pro (mid 2009) hard drive and memory upgrade

So I'm looking to upgrade my hard drive and memory for my 13" MacBook Pro. I'm still wondering just how easy it will be to recover my data, and put it back onto my new drive. I currently have everything backed up to an External drive using Time Machine. If I back it up, and then do the replacement, is it really as simple as it sounds to start it up, put in the Mac OS disk and then restore from a Time Machine backup? I have 150 Gb worth of data and would be ticked off if I can't get it back to my MacBook Pro. Any expertise out there? The actual installation looks easy, but it's the loading the new drive that has me concerned. When I install the new drive, is there anything else I need to do to prep it? And how do I do it if there is? Looking at a 500 gb or even 1 Tb Western Digital drive.

I would say get yourself an external enclosure. Put the hard drive that comes out of your MacBook pro into the enclosure. Put in the new hard drive. Boot up from the external hard drive, use disk utility to format the new drive. Use Carbon Copy Cloner to move everything as it is from old hard drive to new internal one. Re-boot to internal drive, you are done.
Carbon Copy Cloner is a freeware get it from download.com

Need details about Toshiba 15.4" Intel Duo Core 2 T5800

Can anyone give me any information/review on this computer. I found it in a FuturShop store for 999.99$.
However I can't seem to find any information about it online anywhere.
I was told by a friend that it's a new special edition laptop or something. I need a tough computer as I do a lot of traveling and I will be using it for photos, music, videos, home financing, internet, excel, word, etc. Some games but not a main concern.
Any info on the webcam, DVD burning capabilities, and expandibility would be appreciated.
Below are some of the specs. I'm not too knowledgeable on computers so I hope I've given enough relevant info. Thanks in advance.
4GB DDR2
320GB Hard Drive
HELP

Well buddy, the most information and details about all actual Toshiba notebooks can be found on the Toshiba European page.
http://eu.computers.toshiba-europe.com
Here you should search in Laptops area

Need details about messageName

I am using the following code to display a confirm message, once a new record inserted. This a program from the Tool Box tutorial.
MessageToken[] tokens = { new MessageToken("EMP_NAME", employeeName),
new MessageToken("EMP_NUMBER", employeeNum) };
OAException confirmMessage = new OAException("AK", "FWK_TBX_T_EMP_CREATE_CONFIRM", tokens,
OAException.CONFIRMATION, null);
pageContext.putDialogMessage(confirmMessage);
This is working fine. But I could not understand what are these values "AK" and "FWK_TBX_T_EMP_CREATE_CONFIRM". Do we need to configure these any where in the code?
Please give me the details about this?

Please see
<JDEV_CLIENT_INSTALL_DIR>/jdevdoc/javadoc/fwk/oracle/apps/fnd/framework/OAException.html#OAException(java.lang.String, java.lang.String, oracle.apps.fnd.common.MessageToken[], byte, java.lang.Exception[])
The arguments are "Application Short Name", "Message Name".
You would need to define the message in FND Message Dictionary.

Student need details about Business One prices.

Hi
I'm a german student and i have to do a project about SAP Business One. It's necessary for me to get more informations about the prices for this ERP software. I've searched the I-net for many days but couldn't find any helpfull informations.
I need detail informations about asset costs, follow-up costs, license fees, costs for training the employers to handle the software and maintenance costs. If anybody can help me about that i will be very glad.
greetings, daniel

Well, first thing is the pricing is dependant on the country or at least the region you are buying B1 from. For example in Europe you could buy a SAP B1 license for 2500 euros when in Australia you can buy it for AUD2500 (FX rate 0.62).
The price is based on the market, the performance, the index of investment etc.
You also have to differenciate in your analysis the cost of licenses and the cost of implementing. Some partners are using a rule of thumb saying that the cost of implementation is roughly the cost of one license. I tend not to agree with it but that's a base I guess.
Regards,

NEED HELP about file handling and searching

Hi guys !!!!!!!!!!!!!!
A) I need a help from u i wrote this programme to read from the file and assign the lines for the string array.
import java.io.*;
public class ReadFile{
public static void main(String[] args){
int i;
BufferedReader file;
String line() = null;
String fileName = "xx.txt";
          try {
               file = new BufferedReader(new FileReader(fileName));
for(i=1;i<=10;i++){
line(i)= file.readLine();
System.out.println(line(i));
file.close();
          } catch (FileNotFoundException e) {
               System.out.println("File: " + fileName + " not found.");
          } catch(IOException e) {
               System.out.println("Error reading data from file: " + fileName);
the thing is it is compiling but when interpritting it gives the error
Exception in thread "main" java.lang.NullPointerException in line(i)= file.readLine();
plese help me on this and
B) i want to know how to search the string array to find 4 letter words.
i'm taking the each element which is line(i) one at a time and search it.
Plese help me on these issues !!!!!!!!!!!!!!!!!!!!!

You try to create an array with line(i) (as far as i see) but you dont need to keep each line in memory. As far as i understand you just need to process lines sequentially.. (Null pointer exception is thrown because you did not create your array properly!)
Look at this code:
http://www.java-tips.org/java-se-tips/java.io/reading-text-from-a-file.html
You just need to define process method in that code. (and of course try to understand). So as far as i see, you will check for 4-letter words inside process method!
For detecting 4-character word, you need to extract the words in the line using StringTokenizer:
http://www.java-tips.org/java-se-tips/java.util/how-to-use-stringtokenizer.html
Then you can just just use length() method of String class:
http://java.sun.com/j2se/1.3/docs/api/java/lang/String.html
And if you need more advanced logic for processing the lines(currently seems to be the length of strings), you may try regular expressions:
http://java.sun.com/docs/books/tutorial/essential/regex/index.html
http://www.java-tips.org/java-se-tips/java.util.regex/

Need details about soap

I am new ot soap technology . I am using apache axis soap .. Any body can give details about how to use the soap in the application .. For example I want to display the foot ball score in my website then in Germany they alreay provide the soap service then we request the service then get the score and then display that in website . my doubt is without knowing any thing first how to request the soap service provide in the Germany for Foot ball score and any body please give some sample codes and documentation

Thank you for the request.
Your Toshiba Virtual Store account 32651 has been reset.

Need details about Statistics - Internals

Hi,
I am aware of Statistics and how it helps CBO. I would like to know more about internals of Statistics, I know Oracle
maintains certain details in the below views, also in Columns and Partitions Metadata views.
DBA_TABLES
DBA_TAB_STATISTICS
DBA_INDEXES
DBA_IND_STATISTICS
I know it maintains NUM_ROWS and LAST_ANALYZED details in DBA_TABLES and DBA_INDEXES.
Please provide details about the data being maintained in other views.
I'm aware of Histograms, it maintains actual details about Data Distribution. I would like to know how the Normal Statistics differs from Histograms,
it uses the same parameter method_opt with different values.

845956 wrote:
I know it maintains NUM_ROWS and LAST_ANALYZED details in DBA_TABLES and DBA_INDEXES.
It actually maintains much more than just the NUM_ROWS and others you specified.
DBA_TABLES
DBA_TAB_STATISTICS
DBA_INDEXES
DBA_IND_STATISTICS
Regards,
P.

Needed info about io devices and cpu without using prtdiag

Hi
I need to collect info about io devices and cpu. but i cannot use prtdiag.
is there any way to collect this information on solaris machine....
may any available c APIs
Thanks in advance.
Nagesh

yep.... prtconf -vp | grep <wot u r looking 4>

Need details about Satellite S35DVD and memory upgrade

Similar Messages

Maybe you are looking for