Need Different Selection screen for different Queries in a Workbook

Hi,
I have created a workbook with Multiple tabs in BI 7.0.  Each Tab has different Queries and each query has different Selection screens (Variable Selections).
When i open the workbook and refresh it, the selection screen is appearing only for one query.  All the queries are refreshed by this single selection screen, though each query has different Variable selections.  What i need is a seperate selection screen i.e seperate Variable selection appearing for each queries, when i refresh each one of them.
Is it possible to do this?  If anybody has tried this, help me in solving this issue.  Thanks for ur time.
Regards,
Murali

Murali,
If you un-check the 'Display Duplicate Variables Only Once' this WILL solve your problem.
When you Refresh, you should be presented with a single variable selection dialog box, but it should contain an area for each Query (DataProvider) that is embedded in the Workbook.
This is the case if the queries are all on the same tab, or on different tabs.
However, if you have multiple tabs each with a query on it, each query must have it's own DataProvider. If all queries are based on the same DataProvider, it will not work as the Workbook only 'sees' one Query for which it needs variable input.
If you REALLY want multiple variable selection dialog boxes, then maybe the best way to do this is to have the queries in separate Workbooks.
If you don't want the User to have to open 5 queries manually, you could use a Macro in each Workbook that runs on opening, to open the next Workbook in the sequence.
I hope this makes sense!
Regards
Steve

Similar Messages

  • How to get One Selection Screen for all queries?

    Hi Experts,
    I have three queries having selection screens. All the selection screen have the same variables, but the reports are different.
    I have created a workbook having these three queries. Each time when the workbook opens, the three selection screen pops up one after the another. Same values are entered in all the selection screens.
    Now the user wants only one selection screen for all the three reports. Is it possible? I tried but I do not see any way.
    I think there should be some way of getting it done.
    Waiting for your inputs,
    With kind regards,
    Shreeem

    Hi
    If a workbook contains multiple queries that use the same variable, you are prompted to enter the variable values again for each query. To avoid this, set the Display Duplicate Variables Only Once flag.
    Goto Workbook Settings>Under Variables Tab>select Display Duplicate Variables only Once
    http://help.sap.com/saphelp_nw70ehp1/helpdata/EN/54/a493f7256b43698191a2623e5a0532/frameset.htm
    Hope this helps,
    Aparna Duvvuri

  • Dashboard having same query with different selection screen values

    Hi,
    I want to create a dashboard by including different versions (different selection screen values, like yesterday, last week, last month) of same query. Is it possible to achieve it by without creating separate queries? We are in BI 7.
    Thanks in advance
    Nisha

    Hi,
    I want to create a dashboard by including different versions (different selection screen values, like yesterday, last week, last month) of same query. Is it possible to achieve it by without creating separate queries? We are in BI 7.
    Thanks in advance
    Nisha

  • Different AP/AR Invoice Screen for Different Product

    We have requirement that we want to capture
    1. Different colums settings for different product.
    2. Different UDF's for different product
    We are not able to come up with common screen for AP/AR invoice for those product as it makes screen very complicated with many unnessary column for 1 product.
    is it possible to have different screens for different products?

    Hi Avinash,
    You have go through the form settings for Raw level settings and UDF manage through create different category as per your product specification.
    But As per SAP Standard not possible different form settings for different products in A/P and A/R forms.
    for your requirement possible through SDK but thats not right way.
    Thanks,
    Srujal Patel

  • Can we have two different logon screen for the Portal

    Can we have two different logon screens for the Portal?
    We should split the Logon application in two different applications:
    Login # 1
    should be read a DataSource.XML reading the Active Directory (Microsoft), to read-only the profiles from the AD, and block some IP address range.
    Login # 2
    should be read a DataSource.XML reading the Portal user only
    Is this possible?

    Hello Developer,
    Did you find an answer to this problem. I also have a similar issue at hand and am wondering if anybody has a solution for this.
    Thanks, Akhilesh

  • Define selection screen for ldb_process

    Hi I'm using the call function ldb_process for KDF(lfa1, lfb1, bsik), the trouble is that the information its different than if i do it on a normal report defining the logical database kdf and selection screen 903.
    I find that the difference is because the selection screen, this is because the default selection screen for the kdf database is 1000, and this selection has the "Open items at key date" selection with the current date.
    The question is:
    How can i define the selection screen 903 using the call function ldb_proces?
    Thanks
    Pablo Santos

    Hi,
    You cannot define screen version 903 using function LDB_PROCESS. Instead use table "SELECTIONS" of the function module .
    Cheers.

  • Change Layout in Selection Screen for OO ALV-Grid

    Hello everyone,
    I got a problem regarding layouts for objectoriented ALV Grid. I want to make it possible that user can take the layout for ALV he wants to on the selection screen. So far thats no problem and it works. But there are some little problems which I do not know how to fix them. But first the facts:
    (1) I got my parameter for layout
    PARAMETER: p_vari  TYPE disvariant-variant.
    (2) I fill my global layout structure in initialization
    INITIALIZATION.
    * Variante vorbelegen
       gs_variant-username = sy-uname.
       gs_variant-report   = sy-repid.
    * Layout holen
       CALL FUNCTION 'LVC_VARIANT_DEFAULT_GET'
         EXPORTING
           i_save        = 'A'
         CHANGING
           cs_variant    = gs_variant
         EXCEPTIONS
           wrong_input   = 1
           not_found     = 2
           program_error = 3
           OTHERS        = 4.
       IF sy-subrc = 0.
         p_vari = gs_variant-variant.
       ENDIF.
    (3) I got my handling for F4-value help on variant parameter
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_vari.
       CALL FUNCTION 'LVC_VARIANT_F4'
         EXPORTING
           is_variant    = gs_variant
           i_save        = 'A'
         IMPORTING
           es_variant    = gs_variant
         EXCEPTIONS
           not_found     = 1
           program_error = 2
           OTHERS        = 3.
       IF sy-subrc <> 0.
         MESSAGE text-m01 TYPE 'S'.
       ELSE.
         p_vari = gs_variant-variant.
       ENDIF.
    (4) I give back my parameters content into the variant structure at start of selection
    START-OF-SELECTION.
       gs_variant-username = sy-uname.
       gs_variant-report   = sy-repid.
       gs_variant-variant  = p_vari.
    This works all fine but I got some problems when using default variants/layouts. For example I got a default variant only for me. When starting the selection screen it works fine that the default layout was written. It is displayed automatically in the variant parameter. But I want that if i I empty the content (blank it out) from my variant parameter, that report should start with "normal" layout how it was written in the report and NOT with default layout.
    When I clear the gs_variant it works like I want it, but then the alv layout button looks like (without functions for layout), because I do not have the reference to my report.
    So what to do? :-)
    Regards
    Michael

    Wow that was fast, works great, thanks :-)
    I did not use this parameter in set table method but now I fill it dynamically.
    Ok next problem, one step harder ;-)
    Now I have one selection screen for one ALV-Grid, but four radio buttons which control with which data the ALV gets filled (four different fieldcats, data tables and so on). Each Grid got an own HANDLE so that the layouts can be separated in four categories.
    Now I want that by changing the radio button the individual standard layout for the chosen alv grid is getting filled.
    This works fine when using it in selection screen output.
    AT SELECTION-SCREEN OUTPUT.
       CLEAR gs_variant.
    * Layout-Handles individuell für Klausel-Radiobuttons setzen
       IF     p_py IS NOT INITIAL.
         gs_variant-username = sy-uname.
         gs_variant-report   = sy-repid.
         gs_variant-handle   = 'KLPY'.
       ELSEIF p_rh IS NOT INITIAL.
         gs_variant-username = sy-uname.
         gs_variant-report   = sy-repid.
         gs_variant-handle   = 'KLRH'.
       ELSEIF p_aj IS NOT INITIAL.
         gs_variant-username = sy-uname.
         gs_variant-report   = sy-repid.
         gs_variant-handle   = 'KLAJ'.
       ELSEIF p_sr IS NOT INITIAL.
         gs_variant-username = sy-uname.
         gs_variant-report   = sy-repid.
         gs_variant-handle   = 'KLSR'.
       ENDIF.
    * Layout holen
       CALL FUNCTION 'LVC_VARIANT_DEFAULT_GET'
         EXPORTING
           i_save        = 'A'
         CHANGING
           cs_variant    = gs_variant
         EXCEPTIONS
           wrong_input   = 1
           not_found     = 2
           program_error = 3
           OTHERS        = 4.
       IF sy-subrc = 0.
         p_vari = gs_variant-variant.
       ELSE.
         CLEAR p_vari.
       ENDIF.
    But unfortunately selection screen output is getting passed by EACH changing in the selection screen. This means when I try to clear the default layout in my parameter field, it gets refilled automatically with default layout. If I do a condition around the filling (only if not initial) the default value filling does not work fine in every case, e.g. when clearing the parameters field and then change the radiobutton -> then it does not get filled automatically.

  • Selection screen for submit in BSP

    Hi Experts,
    I have gone throught the link to submit the program in BSP using varients, but i even want to see the selection screen for tht so tht user can post his own values over there.
    I tryed SUBMIT with different options but i am not able to see the selection screen for it,pls help me its urgent.
    thanks in advance.
    Saurabh.

    hi,
    the submit i have made it the way u told me..before itself..so thts fine..
    but value which i get in first.htm of these dates is not getting transfered to the next.htm
    thought i am able to get the value through the navigation->set_parameter...
    really i feel this issue is bit getting longer....
    i guess i used my ful day on it...
    thanks for ur great help..but pls let me know is there any proble here in my event handler in first .htm
    IF event_id = CL_HTMLB_MANAGER=>EVENT_ID.
    See if upload is triggered from button
      DATA: event TYPE REF TO CL_HTMLB_EVENT.
      event ?= CL_HTMLB_MANAGER=>get_event( runtime->server->request ).
      IF event->name = 'button' AND event->event_type = 'click'.
        DATA: button_event TYPE REF TO CL_HTMLB_EVENT_BUTTON.
        button_event ?= event.
      ENDIF.
      CASE event->id.
        WHEN 'ok'.
          DATA: date1 TYPE REF TO CL_HTMLB_INPUTFIELD.
          DATA: date2 TYPE REF TO CL_HTMLB_INPUTFIELD.
         date1 ?= CL_HTMLB_MANAGER=>GET_DATA(
                              request = runtime->server->request
                              name    = 'inputField'
                              id      = 'fromdate'
          IF date1 IS NOT INITIAL.
            CALL FUNCTION 'CONVERSION_EXIT_PDATE_INPUT'
              EXPORTING
                INPUT         = date1->value
             IMPORTING
               OUTPUT        = p_date.
          ENDIF.
          date2 ?= CL_HTMLB_MANAGER=>GET_DATA(
                              request = runtime->server->request
                              name    = 'inputField'
                              id      = 'todate'
          IF date2 IS NOT INITIAL.
            CALL FUNCTION 'CONVERSION_EXIT_PDATE_INPUT'
              EXPORTING
                INPUT         = date2->value
             IMPORTING
               OUTPUT        = p1_date.
          ENDIF.
          navigation->set_parameter( 'p_date' ).
          navigation->set_parameter( 'p1_date' ).
          navigation->next_page( 'NEXT' ).
      ENDCASE.
    ENDIF.
    pls help me out expert.
    thanks,
    Saurabh

  • Different zoom levels for different clips in the same project?

    Hi
    I am making a movie with videos from two different cameras. As a result some of the clips are cut down in size to a small portion of the screen. This can be solved if it is possible to use different zoom levels for different clips in the same project. I have not been able to do this. Is it possible?
    kind regards
    Soren

    You can scale the small clips up to the same size of the larger one... but you will get a quality loss.
    Using Motion or Scale to Frame Size commands
    Better to scale the large ones down to a Sequence that matches the smaller clip dimensions.

  • Different Cost Centers for Different Line Items in a single Reservation

    Hello Gurus,
    When we create a Material Reservation, we give the cost center at the header level and that cost center is accounted for each of the line items in the reservation. But when the reservation has many line items which depend on different cost centers,  there is a need to enter different cost centers for different line items in the same Material Reservation. How can this be done? Please suggest.

    Hi,
    It's a standard restriction in SAP functionality  where one reservation document can only accommodate one cost center.
    You can not maintain multiple cost centres for individual line items.
    You have to create seperate Reservations for each cost centre.
    check below thread:
    ONE RESERVATION FOR DIFF COST CENTERS
    Umakanth R
    Edited by: Umakanth R on Dec 8, 2011 7:53 AM

  • So how to specify different answer file for different install images in WDS snap-in?

    hello
    in WDS snap-in, in properties on server name, on client tab, we can define an answer file for unattended windows installation on WDS clients.
    my question is, maybe we have added multiple images in WDS snap-in (win xp image, win 7 , win 2008,...)
    now this one answer file applies to all of them ?
    so how to specify different answer file for different install images in WDS snap-in?
    thanks in advanced 

    Under the "Client" tab of WDS, you should only use an answer-file with settings relevant for the installation. This would be credentials for the WDS deployment share, international settings used during the setup and possibly also destination drive
    details (if you want the installation to take care of partitioning the disk etc). The settings relevant for unattend-files used under "Client" would only be of those in phase 1 (WinPE).
    However, if you would like to have specific unattend file for every installation, e.g. Win7, Server 2008, Win 8 etc, you can browse to the image under "Install Images" under the image Groups. There you can select properties for every image and
    have a personal unattend-file.
    hi Joel
    very cool. thanks a lot, that really helped me.
    best regards

  • Selection Screen for crystal report ?

    Hi to all,
    Is it possible to create selection screen using Crystal report designer alone ?
    I came to know that we can give selection parameteres using SELECT EXPERT option in desginer.
    Can we create selection screen for user input like we have in abab (selection screen) ?.
    Is it possible to check authorization using Crystal report designer ?
    If anyone knows anything .... remotely connected with the question I asked please reply.
    Waiting for reply.
    Regards,
    Surya.

    Surya,
    To do what you are wanting, you will want to do the following:
    1) Create parameters. Open the Field Explorer > right click Parameter Fields > fill in the necessary fields o create the desired parameter.
    2) Add the parameter to the Select Expert.
    2a) If you are using a SQL Command to generate your data set you will need to add the parameter name to the Parameter List of the Command and add it the selection criteria of the SQL statement.
    Something like this:
    WHERE f.FieldName = {?ParameterName}
    HTH,
    Jason

  • Modify selection screen for Logical Database 'SDF'

    Hi
    I need to make a section of the standard selection screen for logical database 'SDF' invisible. I have tried the differet selection screen options of the report attributes, but none of the provided ones give me what I want.
    How can I find the name of the screen group for the "Line Item Selection" block of the selection screen so that I can make it invisible when the selection screen is displayed?
    Thanks,
    Thomas

    I tried to do this:
    Loop at screen.
             if   screen-group4 = '026'
               or screen-group4 = '027'
               or screen-group4 = '028'.
                 screen-invisible = 1.
                 modify screen.
             endif.
    endloop.
    This removed the selection text for these fields, but the Line Item Selection block is still visible, and the actual input fields are also visible. They now look like password input fields with all ***** in them.
    What am I doing wrong?
    Thanks for your help!
    Thomas

  • User presses F4 on the selection screen for the field ''Transport Request"

    Dear ALL,
                     I want to build up a functionality in my report where if the user presses F4 on the selection screen for the field ''Transport Request", then it will display all the Transport Requests involving that particular User...
    What I mean is the normal process that is provided by SAP on saving an object in a package & assigning it to TR...
    How do we Achieve it ?

    Hi.
    First we need to give the client after that client number related requestes display in second parameter F4 help for that purpose i used two function modules.First for read the client no dynamically after that pass the client number second function module.
    then u can get all the request for that client.
    DFIELD-FIELDNAME = 'P_MANDT'.
    APPEND DFIELD.
    CALL FUNCTION 'DYNP_VALUES_READ'
      EXPORTING
        dyname                               = 'Y9EZ_TR_COPYCLIENT'
        dynumb                               = SY-DYNNR
      tables
        dynpfields                           = DFIELD
    READ TABLE DFIELD INDEX 1 ."WITH KEY DFIELD-FIELDVALUE = 'P_MANDT'.
    V_MANDT = DFIELD-FIELDVALUE.
    CALL FUNCTION 'TR_F4_REQUESTS'
    EXPORTING
      IV_USERNAME                   = SY-UNAME
      IV_TRKORR_PATTERN             =
      IV_TRFUNCTIONS                =
       IV_TRSTATUS                   = 'RNDL'
      IV_FROM_DATE                  =
      IV_TO_DATE                    =
       IV_CLIENT                     = V_MANDT
      IV_PROJECT                    =
      IV_TITLE                      =
      IV_VIA_SELECTION_SCREEN       = 'X'
      IV_COMPLETE_REQUESTS          = 'X'
      IT_EXCLUDE_REQUESTS           =
    IMPORTING
       EV_SELECTED_REQUEST           = S_TRKORR-LOW.
      ES_SELECTED_REQUEST           =
    'TR_F4_REQUESTS' This function module for request
    Regards
    muralii

  • Different item arrangements for different folders... possible?

    Hi.
    I have some folders i need arranged in date added, and others in 'name'.
    It seems that when i change it for one it changes it for all.
    Is it possible to have different item arrangements for different folders?
    Thanks

    Yes.

Maybe you are looking for