Need dock extender cable that works with bumpre case
Hi,
Putting a bumper case on an iPhone 4 completely resolves the antenna issue (at least it has for me). The problem is that third party dock connectors such as my car charger won't work with a bumper case because the bumper case is made to exactly fit an Apple manufactured dock cable and the dock housing on my charger is to big to fit. Does anyone know specific extender cables (manufacturer and part number) that will work when the phone is in a bumper case?
Thanks,
Rob
I Had the same problem , went on this site to purshase dock extenders and cables
http://gizmomix.com/shop/accessories/2-extension-dock-extender-adapter-for-iphon e-5-5s-ipad-lifeproof-otterbox-case/
http://gizmomix.com/shop/accessories/dock-extender-adapter-extension-cable-iphon e-5-5s-otterbox-lifeproof-case/
Similar Messages
-
Docking Speakers that Work with Hard Case
Hey there. I am going to get an iPod Video and I am going to be getting a hard case for it and because of previous iPod experiences, I do not want to take my iPod out of it ever again. Thus, as I look for docking speakers, one of my main concerns is that I can dock the iPod whilst the case is still on. Are there any good docking speakers that work with the Contour iSee hard case?
http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/wo/4.RSLID?mco=1 6E37974&nplm=TG336LL%2FA
Any suggestions would be greatly appreciated.Hey!
By appearances it looks much like the Agent 18 case I use.Although I can't see the Dock access on the one you are looking at but they say "easy access to ports".If that's the case,you should be able to use the Bose Sounddock.I do and never take my Pod out.Just can't use the insert(not a major problem)for a snug fit.I can use all the ususal dock connectors too.Also,when you get your 5th Gn,leave the plastic film on the front.Also protects your clickwheel,and from scratches off the case itself.It does happen....
Cheers,
John -
Need HP Print driver that works with OSX Lion 10.7.4
I recently got a new modem and I need to update my SSID and password on my HP wireless printer. The printer software that came with the printer and on the hp website for the printer only supports Mac OSX and doesn't work for OSX Lioin 10.7.4
Is there a way to get software that could update my printer or should i remove and somehow reinstall the printer with different software?
Kids need to print their homework....help!No reason to be sorry,
You should use the Setup Assistant to reconfigure the wireless connection:
Make sure the printer turned on and connected to your Mac by USB.
Go to Applications\Hewlett-Packard\Device Utilities and follow the HP Setup Assistant. it will guide you to connect the printer to your new router.
If you can't find the Hewlett-Packard folder you will need to install the HP software by selecting the HP Recommended Software, the software van be found in the following link:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=al-107372- 1&cc=uk&dlc=en&lc=en&os=219&product=5061092&sw_lang=
Regards,
Shlomi -
Aux cable that works with Belkin Candy Shell Case?
Just got the iPhone 5 this weekend and bought the Belkin Grip Candy Shell case and my Aux stereo cable doesn't fit in the port. Is there a cable out there with an end piece that is more similar to that of the headphones so that it will fit in the port and not make me remove the case everytime I want to listen in my car?
Thanks in advance for any help!I was reading around before I made this thread trying to see if my question has already been answered and I came across a few people who were using an AUX cable for phonecalls, and once they switched to a dock setup they couldn't use their car speakers for calls. I never saw a car kit mentioned but I could have maybe overlooked it.
-
Need an App. uninstaller that works with Leopard.
I need to clear space on my MBP hard drive and upgrading it's internal drive is way too expensive, if you want to preserve your warranty. (Apple Stores won't do it!) I have an external drive, but I'm trying to use it as little as possible cause its a pain to carry around and set up, plugs and wires etc. So I need to find a good, Leopard compatible, application uninstaller. There are too many to choose from: Clean Sweep, CleanApp, AppZapper, Forklift etc.
What has anybody tried, and what are you happy with, and what seems to find all those pesky hidden files?
I know Leopard is an issue because most of the above apps make mention on their sites of issues they are having when working with Leopard.
Any advise would be greatly appreciated.
Thanks, John
Message was edited by: John WalkerAppCleaner, it's free but just as good as the others.
http://www.freemacsoft.net/AppCleaner/index.php -
Are there any usb to parallel converter cables that work with iMac 10.6?
Have a Brother HL-5340D with damaged USB port, can I connect with a usb to parallel converter cable and have it work?
If you try to tweak the dock with third party software, that will corrupt the Dock preferences. Better to leave well enough alone.
-
Need to create .MP4 that works with iPhone/iPad
Hi all,
I'm under the gun here and running into a wall and would appreciate anyone's help:
I'm currently creating video content that's being hosted on an HTML5-based site. Because of this, we have specific requirements about what we can/cannot use for formats.
The most acceptable format is an MP4 wrapper with H.264 encoding and AAC audio.
However, the files that are currently deployed won't play on iPhones or iPads (iOS).
The HTML5 standards guide states that: "Mobile phones like Apple’s iPhone and Google Android phones support H.264 video (baseline profile) and AAC audio (“low complexity” profile) in an MP4 container."
I don't know what a "baseline profile" with "low complexity" audio is.
When I look in Compressor, there are settings for iPhone and iPad, but this makes an .m4v file.
Is the only way to support web video on iPhone/iPad with an .m4v file?
If it can support .mp4, what program/settings should I use to ensure playback?
Thanks much!Still would like to know if this can be done in Compressor.
Can you select the ipod/iphone preset and just change the extension to .mp4? Will this make an MP4 with H.264 encoding as "Simple Profile"?
And I'd love it if someone could define what "simple profile" and "low complexity" means? -
Need a dictation app that works with no internet connection
I frequently find myself without an internet connection on my iphone 5s using the latest iOS but I need to dictate to text. It seems all apps require some sort of cellular connection. Do you know of anything I can use instead? I LOVE Siri but she is not available when I need her. Thank you.
@macnpchz
Sorry both Siri and Dictation requires internet access. Have you tried troubleshooting you internet issue? View the link provided below to assist you
iPhone cellular data connection issues - Apple Support -
i plugged in my 18 month old iPhone to charge it, using the cable that came with it and that I have used regularly all along. I got a warning on my phone screen saying the cable is not certified and may not work properly with my iPhone. Why?
If you updated iPhone to iOS7, it now checks for real Apple Lightning Cable. Your cable may not be Apple, or someone swapped another cable with yours. Make sure the cable end is clean, take a clean dry toothbrush and carefully clean charging port on the iPhone.
-
Is there a shelf stereo system that has a dock that works with the 4th Generation Touch?
Is there a Shelf Stereo system that has a dock that works with the 4th Generation I Pod Touch?
Did you already check the Apple Store online? http://store.apple.com/us/browse/home/shop_ipod/ipod_accessories/speakers?mco=Mj A4ODE3NDA
-
i have an ipod touch and just updated my software to ios 7.1.2. Now I get the message that my adapter, accessory does not support my device. Is there a new adapter that I need to buy that works with the ios 7.1.2?
This is not my problem. However, I think it may be related to an old speaker. I was using the 30 pin adapter for about a week after the upgrade to 7.1.2. But I think with the update the speaker won't work anymore. I will try with a new speaker system. Thank you for trying to assist.
-
I double-click on event to see all the photos in that event displayed, but all I get is 1 large photo on the edit page. To see the photos in that event, I have to scroll. Need to be able to work with all the photos in that event, not one at a time.
Maybe you need to adjust the zoom slider in the lower left corner of the window?
Regards
Léonie -
I updated my computer with the I Photo June 2012 program and now I can not open I photo or shut off the computer because I get a message that says "The library needs to be updated to work with this version of I Photo' I have no other updates to install. How do I update the library to get into I phootos. riderm622
backup your iPhoto library and download the 9.1 update and install it
LN -
Recently upgraded my TV's in my house with new Sceptre 40" and 50" TV's - thank you WalMart. Purchased in September 2014. (new / current Sceptre TVs).
All of the Verizon printed, online, and other documentation for the P265V3 RC (model RC2655005/01B) for Sceptre shows to use code '335'. I have tried the '335' code on both of the TV's and no worky at all.
Following the 'Quick Setup Guide-Verizon FIOS remote' steps (paper/PDF instructions with RC Manual):
I can successfully enter the '335' code as outlned in step 4... and 'The RED LED will blink twice and then stay on'. occurs. So far, so good.
Step 5 states, "5. Press and release the <CH +> button repeatedly until the TV turns off......." This happens perfectly... I can press the <CH+>> button a few times, and indeed, my TV turns off.
Now, onto Step 6: "Test that the remote control is programmed for your TV"..... can't get Mute, A/V, other keys to activate /. be recognized - even though I'm followijng "press and hold that key. Release it as soon as it works"
Does anyone have a working code for Sceptre TV's ??? The Verizon '335' code doesn't work for me.
I need the 'best code' anyone has found that works with new Sceptre TV's.... the 335 code that VZ recommends... no worky.Robertop,
have you tried the following? The info below is found here
Turn on your TV and the FiOS TV Set-Top Box.
Make sure you can see live TV.
Press and hold the OK and FiOS TV buttons together then release both buttons.
The red LED light blinks 2 times and then stays on.
Press and hold the Play button.
The remote control tries a new TV code every second.
The red LED light blinks each time a new code is sent.
When the TV turns off, release the Play button immediately.
NOTE: Some TVs may respond slower than others. If necessary, you can press the Ch+ and Ch- buttons to go forward or backward one TV code at a time.
Test your remote to ensure it is working properly:
- Turn on the TV by pressing the TV button on your FiOS TV remote.
- Press the Vol+ and Vol- buttons to ensure that you can control the volume.
- Press the Mute and A/V buttons to ensure they work.
If any of these buttons do not work, press and hold that button. Release the button as soon as it works.
If all the buttons work, press OK to this TV remote code.
The red LED light blinks 3 times and then turns off. Your remote control is now programmed. -
When I click on iPhoto icon I get a box that reads "The photo library needs to be upgraded to work with this version of iPhoto." Whether I hit Quit or Upgrade the problem is not fixed. Any suggestions? Yes, I have tried Command Option iPhoto..no luck. I think I may have hit Upgrade the first time. I really need this to be fixed ASAP. Thanks for your help.
Assuming iPhoto 09 or later:
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD
Maybe you are looking for
-
When I try to open video files purchased through iTunes in Quicktime, I get the message: 'Error 23132: an unknown error occurred. This never happened until I updated iTunes, but when I try to go back to the previous version, I still get the message.
-
SelectionChange for enter and backspace keys
Hello all, Our VSTO addin needs to know the current selection so we can sync our taskpane with current selection. We are using the SelectionChanged event to register our taskpane synch routine. The problem is that this event doesn't fire on Enter or
-
My iPad 2 will not update the apps
I just upgraded my iPad 2 to 8.02 and 24 apps will not upgrade even when sinking to my MBPro through iTunes. Everything else is fine. Suggestions. I've done hard restarts. I could just ignore but the red numbers are always there.
-
Attention! For the visually impaired users of OS X!!!
Just wanted to bring this to the attention of all users of Universal Access Zoom feature in OS X. There is a bug in OS 10.4.8 that basically defaults amount of magnification to "0" each time Zoom is switched On and Off. It can be quite a time waster
-
Assign string to various fields of internal table
hello, i have one string : lt_str TYPE STANDARD TABLE OF string. And there is one structure as: begin of ty_data field1 field2 field 3 end of ty_data. * table declaration: gt_data TYPE STANDARD TABLE OF ty_data WITH HEADER LINE. In old ECC we ha