Need Document/steps for configuring Samba,apache,tomcat

Hi all,
I need steps/document for configuring samba,tomcat,apache in solaris 10 x86.please guide.please send to [email protected]

docs.sun.com should have a lot od the Solaris specific documentation- I don't know how much it would have have specifically on Samba, Apache and Tomcat etc.
Documentation on configuring Samba and Apache (and probably Tomcat) are available on the respective websites. You may want to Read The existing technical Manuals then post questions on specific issues that are not covered by the exisitng documentaion.

Similar Messages

Please help�. I need a steps for configuration

Dear All,
Plese help me.... I am new in StorEdge configuration.
Please give me the steps for configuration of Sun StorEdge 3310
Thanks

You didn't mention it yet, but ...
Have you gone through the manuals?
http://docs.sun.com/app/docs/coll/3310scsi-array*

Need Document/Steps for Cloning RAC 11g.

Hi,
I am looking for a document to clone an existing RAC 11g database.
I believe in the cloning process this will create a new RAC database...
Also the source database data has to be applied to the cloned rac db.
Environment 11g, AIX.
Advice needed.
Thanks in advance.

Hello Indigo,
The steps are necessary,
1) Create the password file
2) Create the spfile for the DESTINATION database (auxiliary database)
3) Create the necessary mount points or the folders for the database files
4) Execuute this command from the primary database.
DUPLICATE TARGET DATABASE TO <standby_name>
FOR STANDBY
FROM ACTIVE DATABASE
SPFILE
PARAMETER_VALUE_CONVERT '<string>', '<string>'
SET DB_FILE_NAME_CONVERT '<string>', '<string>'
SET LOG_FILE_NAME_CONVERT '<string>', '<string>'
SET SGA_MAX_SIZE 1000M
SET SGA_TARGET 850M;
Please see the *11g : Active Database Duplication ID 568034.1*
Best Regards,
Rodrigo Mufalani
http://www.mrdba.com.br/mufalani

Need Steps for Configuring BI 7.0 with ECC 6

Hi All,
I need steps for configuring BI 7.0 with ECC 6, Please if anybody has material, Please share with me...
Regards,
Kiran Telkar

Hi,
regarding bi7 and ecc6.0 Configruration,pls chk this
https://www.sdn.sap.com/irj/sdn/developerareas/bi?rid=/webcontent/uuid/e78a5148-0701-0010-7da9-a6c721c6112e [original link is broken] [original link is broken] ...
http://sheffield.gumtree.com/sheffield/57/13455557.html
https://www.sdn.sap.com/irj/sdn/developerareas/bi?rid=/webcontent/uuid/e78a5148-0701-0010-7da9-a6c721c6112e [original link is broken] [original link is broken] ...
*pls assign points,if links useful*
regards,
CSM Reddy

Some steps for configuring Network are skipped in installation Solaris 10

Hi everybody !!!
I'm a newbie in Solaris 10. I had some problems in installation Solaris 10:
I downloaded installation packet for x64/x86 (DVD) on site Sun.I want to install Solaris 10 on my PC AMD 2500+.I connect to internet through a LAN.
1)In process installation, some steps for configuring Network ( from 5 to 15 in Solaris 10 installation guide) were skipped automatically. It has been directly moved to 16-th step(setup Time and region). Then i tried to finish installing it. But in working with it, i recognized that Network card had been not found( i use NVIDIA nForce MCP Networking Adapter). I typed some command in console shell :
$netstat -in
loo...........
and received only one row like above.
i have tried some times , but not succeeded
2)Port USB is also not working
Please help me. Thanks a lot !!!

hi Vantuan,
guess I just posted reply to your other post...
also check Sun hardware compatibility list for your network card here:
http://www.sun.com/bigadmin/hcl/data/sol/components/views/networking_all_results.page1.html
- Jags Desai

Steps for configuring Outbound Idoc OILSHI01

Hi experts,
    can anybody tell me the steps how to configure an Outbound IDOC.
    It is better if somebody can take Shipment IDOC of IS-Oil - OILSHI01.
    if not anything else will also do.
    Kindly give me steps in detailed. Since i have never done this. Including
    distribution modle (BD64). in which case it generates the Automatic Partner
    profiles.?
<REMOVED BY MODERATOR>
Regards,
Umesh
Edited by: Alvaro Tejada Galindo on Apr 21, 2008 3:08 PM

Hi Umesh,
Sorry for the late reply. Let me clear your couple of misconceptions first.
Every idoc is an application idoc. That is, if an idoc is not attached to any application, then it doesnt make business sense to generate that idoc.
Secondly, an idoc is outbound or inbound depending upon its communication direction w.r.t. the sender system. If the idoc is going out from lets say R/3 system (where you are creating distribution model), then its an outbound idoc and if its coming inside, then its inbound idoc.
Now the further steps:
Since its a transactional data idoc, we dont generally go for change pointer activation. Kindly read the documentation to get more idea (if you dont have any then send me your mail id, i will send you a very good document). For transaction data, we use output type to trigger an idoc. Following are the steps to trigger an outbound idoc through output type.
However, remember that in this case, you need help of your functional consultant at every point so that you can clearly determine your application definations and configuration.
1. Go to transaction NACE. There you can see all the generic applications listed. Find out the one relavant to your idoc type from the functional person. If you select your relavant aplication, and click on the "Output types", you will see a list of all the output types for each business transaction defined for that application.
2. Again, ask your functional consultant, as to which output type is configured for your business transaction. Select that output type and go to "Processing routines".
3. There you will be able to see different ways in which the idoc can be triggered. Most of the time , we use processing routine "A (Distribution (ALE))". There you will also see the report which will trigger the idoc.
4. All the above mentioned customization is to be done by the functional consultant (or by technical after strictly seeking the permission). Once the output type is set, you go to the business application (IS-oil) which is triggering your idoc.
There, you will see the option of generating delivery (or something similar, again only the person who has worked on the application can tell that). there you can populate the idoc.
Once the idoc is populated by the application, there are couple of ways of triggering the idoc.
     a. trigger the idoc on saving the doucment. this triggers idoc as soon as you save the idoc.
     b. Collect for mass processing. For this you need to run the report RSNASTED after the idocs are populated to trigger them.
     c. Collect for application specific posting. For this , you need to know the transaction, specific to your business data to trigger the idoc and all you need to do is just run that transaction.
Hope you got the points mentioned above. Kindly go through them carefully and then give me your mail id. I will send you one good document which will clear your understanding.
Hope this was helpful.
<REMOVED BY MODERATOR>
Cheers,
Karan
Edited by: Alvaro Tejada Galindo on Apr 21, 2008 3:09 PM

Steps for configuring LDAP in Portal

hi all,
i need step by step configuration for the LDAP Server in portal
so can u please help me in that.
thanks,
sriram.

Hi Sriram,
Following are few documents for configuring LDAP in portal. Have a look.
Check this to Configuring EP UME with LDAP Data Source, in the below link check the left navigation child nodes:
http://help.sap.com/saphelp_nw70/helpdata/EN/42/d7b4f47ea91635e10000000a1553f7/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/EN/48/d1d13f7fb44c21e10000000a1550b0/frameset.htm
Have a look at these BLOGS which tells you step step by approach to integrate LDAP with SAP EP.
Novell eDirectory 8.8 as UME Data Source for EP : Part I
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/2937. [original link is broken]
UME Data Source: LDAP
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/ep/setting%2bup%2ban%2bldap%2bfor%2bthe%2bportal
Windows Integrated Authentication via Kerberos on an LDAP data source
Check these
http://wiki.sdn.sap.com/wiki/display/EP/Setting%2bUp%2ban%2bLDAP%2bfor%2bthe%2bPortal
https://wiki.sdn.sap.com/wiki/display/HOME/ConfigureLDAPand+EP
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e1959b90-0201-0010-849c-d2b1d574768b
I hope these links will help you.
Regards,
Gopal.

Need help compiling an EJB with Apache Tomcat 5.5

Hi everyone, I need some help. I�m writing an EJB that has to run on Apache Tomcat 5.5.
I�m importing the javax.ejb.* library, but Eclipse can�t find the JAR it needs. Where can I find this JAR? Do I have to download or what?
Thanks a lot.

Thanks, I�ve already downloaded the javaee.jar from the Sun webpage. As you can see I�m quite new to EJB developing. I want to create an EJB that will get some information from a database and send it back to a servlet, and then a web page. I've been browsing the JBoss page, and I see there are LOTS of versions. Any suggestion, regarding which version I shoud use for this? Thanks a lot again.

Steps for configuration of version management

Dear Experts,
Kindly tell me what is meant by version management and under which situation this will be used and how its impact in MM after configuring this. Kindly let me know the configuration steps for version management.
Regards,
Prasath

You make the settings here for activating the version management:
SPRO --> MM --> Purchasing --> Version management --> Set up version management for PR -->here make the settings and tick on the activate indicator...
Now define the relevent fields which shd go under version change:
SPRO --> MM --> Purchasing --> Version management --> Version relevent fields of PR's
If you wanna set up change displays and its output, then make settings here:
SPRO --> MM --> Purchasing --> Version management --> Set up change displays...
NOTE: You can only release this PR fully if you tick the version completed indicator in the PR document...
Similrly you can activate for Purchase order
spro-mm-purchasing-version management-purchase order

Why we need SSL Certificates for configuring App Server in Sharepoint

Hi Support,
We are planning to have a separate server for Apps, while configuring the server its asking for certificate. The main scenario is while configuring server inside the same firewall why we need SSL for configuring.
Could you please let me know the reason why we need SSL for configuring App Server.
Thanks in Advance,
Regards,
Pradeep

Hi Pradeep,
SSL (Secure Sockets Layer) is a transaction security standard that provides encrypted protection between browsers and App Servers. When SSL is enabled for an App Server, browsers communicate with the App
Server by means of an HTTPS connection, which is HTTP over an encrypted Secure Sockets Layer. HTTPS connections are widely used by banks and web vendors for secure transactions over the web.
Secure Sockets Layer is a requirement for web applications that are deployed in scenarios that support server-to-server authentication and app authentication. This is such a scenario. As a prerequisite
for configuring Task Synchronization, the computer that is running SharePoint Server must have SSL configured.
Reference:
http://blogs.technet.com/b/speschka/archive/2012/09/03/planning-the-infrastructure-required-for-the-new-app-model-in-sharepoint-2013.aspx
http://corypeters.net/2013/03/ssl-and-sharepoint-2013/
Best Regards,
Eric
Eric Tao
TechNet Community Support

Need config steps for Multi-Mode Transportation in SD

Hi Gurus,
I am implementing Transportation Module in SD , I covered domestic part means Single mode .
But Now i have complete Multi-Mode Transporatation for Export , contains Rail, Ships, i.e Multimode Transporation ,
Please give me Config. steps for it
Thanks
Devdatta Joshi

Check if the link below is helpful:
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LETRA/SDTRA.pdf
Regards,
Rajesh Banka
Reward points if helpful.

Steps for configuration of products

Hi ,
can anyone say me the procedure that should be followed for configuring the Products.
bye,
divya

Hi Divya,
What kind of procedure are you talking about?
Downloading the master data for configuration or configuring the product?
If its just configuring the product, when u add a configurable product in CRM order, a configuration tab appears. Go to this tab and choose the characteristic value corresponding to characteristics. Click on Check button to see if configuration is consistent and complete. If yes, save the order.
Regards,
Vivek Gupta

JAAS configuration steps for web example in tomcat

Hi,
I have to configure JAAS for the deployement of my web application in tomcat.
but i am not getting any proper document for this.
If any one could provide some useful information or documentation so please help me.
Thanks

after googling i came to the forum.
i am not getting any proper way from where i can start Jaas login module implementation for my web application with tomcat. The information i am getting from google is to do the job using COMMAND PROMT, but I want to implement that in my web application so that i can start that using webUI
Can you provide me some links which will be help ful to start.
Thanks

Steps for configuring shipping cost document

Hi experts
Can anybody Please explain me the steps. Say that shipping cost is based on Route, weight group and carrier. We will be having an condition record for it. So here how do we configure shipping cost document.
awaiting reply
Bhanu

hi,
you have to add a condition for freight in the calcualtion - sheet.
Bring i your condition - records.
While copying form delivery to invoice, you have to set the pricing - roule 'H' calulate new fright costs and in the invoice, there will be a new pricing for the fright-costs ( and the tax ). ( The Condition should have the type fright ).
Hans

Need more steps for EP installation

Dear All,
after installation the Enter Prise Portal, what r the steps r required.
how to run the portal with system administration.
EX: ep 7.0 sp14 with communucation users -
please provide the steps.
Thanks in advance.
Thanks & Regards,
Kaleem.

Hi Mohammed,
I will not go into much detail as you can find the require in the Portal Administration Guide link below. After you have install Portal, look into the part with: http://help.sap.com/saphelp_nw70/helpdata/EN/c4/a35f40a25eef6fe10000000a1550b0/frameset.htm
1) Fi[First Steps (Logging On to/Off the Portal, The Portal Interface, Personalizing Your Portal)|http://help.sap.com/saphelp_nw70/helpdata/EN/fa/45df3df2ad685ae10000000a11405a/content.htm]SAP NetWeaver Portal is both a development and a runtime environment. This document describes the interface with which you will be working and gives an overview of the initial tasks that you need to perform as a portal administrator.
After installing SAP NetWeaver Portal, you can log on to personalize your own portal environment and to begin creating a custom portal for deployment in your enterprise.
2) [Initial Configuration Tasks |http://help.sap.com/saphelp_nw70/helpdata/EN/46/a660054ad945158e5021155bca3495/content.htm]
This section provides a set of initial tasks you should perform in the portal after you have installed it and successfully logged on for the first time. A reference to where you can find detailed information for each task is specified.
a) Perform the mandatory tasks. See Mandatory Tasks.
b) Analyze the optional tasks and perform those that are relevant to your system landscape. See Optional Tasks.
Regarding your question on how to run the Portal with System Administration, check out details on Super Administration:
http://help.sap.com/saphelp_nw70/helpdata/EN/5a/0338f80c0b11d7b84800047582c9f7/content.htm
3) [Standard Portal Content|http://help.sap.com/saphelp_nw70/helpdata/EN/5a/09c0756c2d4ba5a8b5c6d4ef120304/content.htm]
This section describes the roles and content shipped with the portal. It does not cover standard content that is specific to other portal add-on capabilities, such knowledge management and collaboration.
4) [User Administration|http://help.sap.com/saphelp_nw70/helpdata/EN/59/bf2287b3cb5e48af94f99929ad15b9/content.htm]
The user administrator performs all tasks that are relevant to user management and role assignments. In the portal, all user management functions related to users and groups are provided by the user management engine (UME). The UME is integrated in the SAP NetWeaver Application Server (AS) Java.In addition, you can find information about administration functions that are specific to the portal. These are: Assigning roles to users and groups; Mapping users u2013 for Single Sign-On purposes
5) [Content Administration |http://help.sap.com/saphelp_nw70/helpdata/EN/5a/0339000c0b11d7b84800047582c9f7/content.htm]
The content administrator is responsible for all tasks that are relevant to content creation and maintenance directly in the portal.
6) [System Administration|http://help.sap.com/saphelp_nw70/helpdata/EN/5a/0339040c0b11d7b84800047582c9f7/content.htm]
The system administrator is responsible for the configuration and ongoing support of the portal and its landscape. This role therefore contains configuration, maintenance, and support related functionalities.
The above are some basic steps you can take after Portal installation. Go through the help.sap documents and you can identify which steps you can start with and plan the needed steps require.
Hope that helps and award points for helpful suggestions.
Ray

Need Document/steps for configuring Samba,apache,tomcat

Similar Messages

Maybe you are looking for