Need document to configure dataguard maximum protection...
Hi,
1) I need a Oracle Document to configure the dataguard using maximum protection mode.
2) Is it mandatory to have 2 standby setup ?
which version?
>
1) I need a Oracle Document to configure the dataguard using maximum protection mode.
>
check documentation on tahiti.oracle.com
http://download.oracle.com/docs/cd/E11882_01/server.112/e17022/protection.htm#CHDEDGIF
>
2) Is it mandatory to have 2 standby setup ?
>
depends on your requirements. only you can answer this question.
hth
Similar Messages
-
Dataguard: RESYNCHRONIZATION state for MAXIMUM PROTECTION mode
Dear All
Hi
When you have Data guard in 10g Rel 2 and your primary database protection mode is configured as MAXIMUM PROTECTION , when the standby database goes down , the PROTECTION_LEVEL in primary database changes to RESYNCHRONIZATION before the primary database shuts down .
SQL> select protection_level from v$database;
PROTECTION_LEVEL
RESYNCHRONIZATION
I need to know for how long primary database can stay in RESYNCHRONIZATION level before it goes down ? and how we can change this time ???
Thanks
Edited by: kamranbs on Jul 19, 2011 2:13 PM
Edited by: kamranbs on Jul 19, 2011 3:09 PMSomething not quite right, unless you have extremely slow disks or the OS is slacking (using VM?) . As soon a the net_timeout expires, primary initiates shutdown abort which should be instant.
-
Sir,
Can anyone help me by sending documents to configure dataguard like step by step configuration?
regards
MathewSir,
We configured dataguard(Oracle9i, WIndows 2000 server). I have one doubt.
How can we make Standy Server as Primary when Standby database fails
without DBA executing commands?
eg: Put all commands in on script file(eg: std.sql) and call from Batch file.
But how to set/schedule this file?
regards
Mathew -
Configuring maximum protection mode in dataguard with oracle 10g
Dear All,
I am facing a big problem in my configuration for oracle dataguard in maximum protection mode. as per oracle documentation i have done the following.
on the primary database i configured the floowing parameter.
LOG_ARCHIVE_DEST_2='SERVICE=CDER LGWR SYNC AFFIRM
VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE)
DB_UNIQUE_NAME=CDER'
on the standby i configured the following parameters.
LOG_ARCHIVE_DEST_2='SERVICE=REDC LGWR SYNC AFFIRM
VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE)
DB_UNIQUE_NAME=REDC'
i created standby redo logs on the standby database as per documentation.
I shut down the primary database and started it in mount stage and i executed the following commands.
SQL> ALTER DATABASE SET STANDBY DATABASE TO MAXIMIZE PROTECTION
after database was sucessfully alterd, i execute it the following command to open the database.
SQL > ALTER DATABASE OPEN;
what is happening is that i am recieving the Error end of communication channel and also after i look at the log file the following error is in place
Thu Jul 22 23:33:37 2010
Errors in file c:\oracle\product\10.2.0\admin\redc\bdump\redc_psp0_1088.trc:
ORA-16072: a minimum of one standby database destination is required
though when i reset the dataguard to maximize performance it work really successful and the database open;
please guys guide me through thisyou got it
redc.__db_cache_size=1056964608
redc.__java_pool_size=16777216
redc.__large_pool_size=16777216
redc.__shared_pool_size=318767104
redc.__streams_pool_size=0
*.audit_file_dest='C:\oracle\product\10.2.0\admin\REDC\adump'
*.background_dump_dest='C:\oracle\product\10.2.0\admin\REDC\bdump'
*.compatible='10.2.0.3.0'
*.control_files='C:\oracle\product\10.2.0\oradata\REDC\control01.ctl','C:\oracle\product\10.2.0\oradata\REDC\control02.ctl','C:\oracle\product\10.2.0\oradata\REDC\control03.ctl'
*.core_dump_dest='C:\oracle\product\10.2.0\admin\REDC\cdump'
*.db_block_size=8192
*.db_domain=''
*.db_file_multiblock_read_count=8
*.DB_FILE_NAME_CONVERT='C:\oracle\product\10.2.0\oradata\CDER','C:\oracle\product\10.2.0\oradata\REDC','D:\oracle\oradata\CDER','D:\oracle\oradata\REDC'
*.db_name='REDC'
*.DB_UNIQUE_NAME='REDC'
*.dispatchers='(PROTOCOL=TCP) (SERVICE=REDCXDB)'
*.FAL_CLIENT='REDC'
*.FAL_SERVER='CDER'
*.job_queue_processes=10
*.LOG_ARCHIVE_CONFIG='DG_CONFIG=(REDC,CDER)'
*.LOG_ARCHIVE_DEST_1='LOCATION=D:\oracle\Archives
VALID_FOR=(ALL_LOGFILES,ALL_ROLES)
DB_UNIQUE_NAME=REDC'
*.LOG_ARCHIVE_DEST_2='SERVICE=CDER LGWR SYNC AFFIRM
VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE)
DB_UNIQUE_NAME=CDER'
*.LOG_ARCHIVE_DEST_STATE_1='ENABLE'
*.log_archive_dest_state_2='ENABLE'
*.LOG_ARCHIVE_FORMAT='%t_%s_%r.arc'
*.LOG_ARCHIVE_MAX_PROCESSES=5
*.LOG_FILE_NAME_CONVERT='D:\oracle\Archives','D:\oracle\Archives'
*.open_cursors=300
*.pga_aggregate_target=471859200
*.processes=150
*.REMOTE_LOGIN_PASSWORDFILE='EXCLUSIVE'
*.sga_target=1417674752
*.STANDBY_FILE_MANAGEMENT='AUTO'
*.undo_management='AUTO'
*.undo_tablespace='UNDOTBS1'
*.user_dump_dest='C:\oracle\product\10.2.0\admin\REDC\udump' -
Need Document/steps for configuring Samba,apache,tomcat
Hi all,
I need steps/document for configuring samba,tomcat,apache in solaris 10 x86.please guide.please send to [email protected]docs.sun.com should have a lot od the Solaris specific documentation- I don't know how much it would have have specifically on Samba, Apache and Tomcat etc.
Documentation on configuring Samba and Apache (and probably Tomcat) are available on the respective websites. You may want to Read The existing technical Manuals then post questions on specific issues that are not covered by the exisitng documentaion. -
9i Dataguard Problem in MAXIMUM PROTECTION mode
Dear All
Hi
I have 9i Rel 2 (9.2.07) dataguard environment on Linux Redhat Advanced Server 3
The Pretenction mode is Maximum Protection
One day I noticed that my dataguard Database is about 100 log files before than the Primary:
On priamry the current log sequence# was 7804
But in standby the last log that was transfered and applied was 7716
In primary I executed the following select:
SQL> Select protection_mode , protection_level from v$database;
the result was:
protection_mode=MAXIMUM PROTECTION
protection_level=SYNCHRONIZING
What I want to know is:
Why the primary database did not become shutdown when it is in MAXIMUM PROTECTION mode and why it has continued working when the log files could not transfer to standby database ????
Thank you in advance for your replyAnybody any idea ??????
-
Need documents of Manager-Self-Service (MSS) configuration in R3
Hello Friend's,
I need the configuration of MSS in R3 side which Functional guy will do... I find the document for ESS but i couldn't find for MSS ... so please give me guidance for that asap...
here is the link for ESS configuration in r3 http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CAESS/ESSIAC.pdf
Like this pdf file i need for MSS configuration in r3 side...Thanks Siddharth for your quick reply, but I still have doubts.
According to Note 1588625 - Release information for Manager Self-Services Add-On 1.0, the MSS addon will be release for Portal and NWBC , so if you don´t want to use a porta you can use NWBC but,
How can we call it from a Websphere portal? Is there any integration option using NWBC and Websphere portal?
And in Note 1582553 - Release strategy for the ABAP add-on EA-HR_MSS you can see that now, the availability of EA-HR_MSS is only in controlled availability, and until end of 2011 will not be fully released!!
SAP Release Add-On Release Availability
SAP ECC 6.0 EHP5 EA-HR_MSS 1.0 22.06.2011 CA
SAP ECC 6.0 EHP5 EA-HR_MSS 1.0 22.12.2011 GA
GA: general availability
CA: controlled availability
PL: pilot version
So, really you can use MSS integrated in a Websphere portal?
Thanks in advance and best regards. -
Doubt on dataguard maximum perfomance mode
HI Gurus ,
We have a dataguard environment configured in 12.1.0.2.0 on OEL 5.6. Dataguard is configured in maximum performance using following congiguration ,
18:26:26 SQL> show parameter log_archive_dest_2
NAME TYPE VALUE
log_archive_dest_2 string service=TGOID NOAFFIRM LGWR ASYNC COMPRESSION=ENABLE VALID_FOR=(ALL_LOGFILES,PRIMARY_ROLE) DB_UNIQUE_NAME=TGOID
Here I used LGWR ASYNC and enabled real time apply at my standby using ,
SQl> alter database recover managed standby database using current logfile disconnect;
Here are my doubts ,
1. If we enable real time apply ,the changes will reflect at standby when a commit happens at primary. is it correct ?
But here I can't see that behavior , the changes are getting applied to standby only when I make a log switch.(as in the case of ARCH transport mode )
2. So if I wish to get the changes done at standby when a commit happens at primary, is I need to set the following ?
First ,
alter system set log_archive_dest_2=service=TGOID AFFIRM LGWR SYNC COMPRESSION=ENABLE VALID_FOR=(ALL_LOGFILES,PRIMARY_ROLE)DB_UNIQUE_NAME=TGOID scope=both;
Secondly,
ALTER DATABASE SET STANDBY DATABASE TO MAXIMIZE PROTECTION/MAXIMIZE AVAILABILITY .
is it correct ?
3. If its correct what is the advantage of using lgwr async in maximum performance ? then what is meant by real time apply in maximum performance ?
Thanks and regards,
Mahihttp://docs.oracle.com/cd/B19306_01/server.102/b14239/create_ps.htm#i1225703
Step 2 Determine the appropriate number of standby redo log file groups
(maximum number of logfiles for each thread + 1) * maximum number of threads -
Primary db get error ORA-03113 in maximum protection mode
primary db pfile :
cds.__db_cache_size=230686720
cds.__java_pool_size=4194304
cds.__large_pool_size=4194304
cds.__shared_pool_size=71303168
cds.__streams_pool_size=0
*.archive_lag_target=0
*.background_dump_dest='/opt/oracle/database/cds/bdump'
*.control_files='+data/control01.ctl','+data/control02.ctl'
*.db_name='cds'
*.db_recovery_file_dest_size=2147483648
*.db_recovery_file_dest='+data1'
*.db_unique_name='cds'
*.dg_broker_start=FALSE
*.fal_client='cds'
*.fal_server='cdssty'
*.log_archive_config='DG_CONFIG=(cds,cdssty)'
*.log_archive_dest_1='LOCATION=+data2 VALID_FOR=(ALL_LOGFILES,ALL_ROLES) DB_UNIQUE_NAME=cds'
*.log_archive_dest_2='SERVICE=cdssty LGWR SYNC VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE) DB_UNIQUE_NAME=cdssty'
*.log_archive_dest_state_2='ENABLE'
cds.log_archive_format='%t_%s_%r.dbf'
*.log_archive_max_processes=1
*.log_archive_min_succeed_dest=1
*.sga_target=300m
*.standby_archive_dest='+data2'
*.standby_file_management='AUTO'
*.undo_management='auto'
*.undo_tablespace='undocds01'
*.user_dump_dest='/opt/oracle/database/cds/udump'
standby db pfile :-
cdssty.__db_cache_size=213909504
cdssty.__java_pool_size=4194304
cdssty.__large_pool_size=4194304
cdssty.__shared_pool_size=88080384
cdssty.__streams_pool_size=0
*.archive_lag_target=0
*.background_dump_dest='/opt/oracle/database/cdssty/bdump'
*.control_files='+DATA01/control01.ctl','+DATA01/control02.ctl'#Restore Controlfile
*.db_file_name_convert='+data','+data01'
*.db_name='cds'
*.db_recovery_file_dest_size=2147483648
*.db_recovery_file_dest='+data02'
*.db_unique_name='cdssty'
*.dg_broker_start=FALSE
*.fal_client='CDSSTY'
*.fal_server='CDS'
*.log_archive_config='DG_CONFIG=(cdssty,cds)'
*.log_archive_dest_1='LOCATION=+data03 VALID_FOR=(ALL_LOGFILES,ALL_ROLES) DB_UNIQUE_NAME=cdssty'
*.log_archive_dest_2='SERVICE=cds LGWR SYNC VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE) DB_UNIQUE_NAME=cds'
cdssty.log_archive_dest_state_1='ENABLE'
cdssty.log_archive_format='%t_%s_%r.dbf'
*.log_archive_max_processes=1
*.log_archive_min_succeed_dest=1
cdssty.log_archive_trace=0
*.log_file_name_convert='+data','+data01'
*.sga_target=300m
*.standby_archive_dest='+data03'
cdssty.standby_archive_dest='+DATA03'
*.standby_file_management='AUTO'
*.undo_management='auto'
*.undo_tablespace='undocds01'
*.user_dump_dest='/opt/oracle/database/cdssty/udump'
primary database is in maximum protection mode
stanbdy db has two standby redolog file groups
llistener at both the end is up
when i try to open primary databsae i get the error blow:
ERROR at line 1:
ORA-03113: end-of-file on communication channel
i read the alert log and its log are as blow:
Database mounted in Exclusive Mode
Completed: ALTER DATABASE MOUNT
Wed Nov 7 04:28:00 2012
alter database open
Wed Nov 7 04:28:01 2012
LGWR: STARTING ARCH PROCESSES
ARC0: Archival started
LGWR: STARTING ARCH PROCESSES COMPLETE
ARC0 started with pid=16, OS id=13841
Wed Nov 7 04:28:01 2012
LGWR: Primary database is in MAXIMUM PROTECTION mode
LGWR: Destination LOG_ARCHIVE_DEST_1 is not serviced by LGWR
LGWR: Minimum of 1 synchronous standby database required
Wed Nov 7 04:28:01 2012
Errors in file /opt/oracle/database/cds/bdump/cds_lgwr_13720.trc:
ORA-16072: a minimum of one standby database destination is required
Wed Nov 7 04:28:01 2012
Errors in file /opt/oracle/database/cds/bdump/cds_lgwr_13720.trc:
ORA-16072: a minimum of one standby database destination is required
LGWR: terminating instance due to error 16072
Instance terminated by LGWR, pid = 13720
and the contents of /opt/oracle/database/cds/bdump/cds_lgwr_13720.trc are:
/opt/oracle/database/cds/bdump/cds_lgwr_13720.trc
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
ORACLE_HOME = /opt/oracle/product
System name: Linux
Node name: Host1
Release: 2.6.18-128.el5
Version: #1 SMP Wed Dec 17 11:42:39 EST 2008
Machine: i686
Instance name: cds
Redo thread mounted by this instance: 1
Oracle process number: 6
Unix process pid: 13720, image: oracle@Host1 (LGWR)
*** 2012-11-07 04:28:01.123
*** SERVICE NAME:() 2012-11-07 04:28:01.122
*** SESSION ID:(45.1) 2012-11-07 04:28:01.122
Destination LOG_ARCHIVE_DEST_1 is not serviced by LGWR
Standby database verification failed:16072
ORA-16072: a minimum of one standby database destination is required
error 16072 detected in background process
ORA-16072: a minimum of one standby database destination is required
if i open primary db in maximum availability mode its working fine ..
the problme is only with maximum protection mode
plz tell me what is wrong with my configurationhi thanx again,
i read both the oracle links u suggest me in your previous post ,but i have not found any thing like,min 2 standby database require for maximum protection mode,
in first link :-
5.6.1.1 Maximum Protection Mode
This protection mode ensures that no data loss will occur if the primary database fails. To provide this level of protection, the redo data needed to recover each transaction must be written to both the local online redo log and to the standby redo log on at least one standby database before the transaction commits_. To ensure data loss cannot occur, the primary database shuts down if a fault prevents it from writing its redo stream to at least one remote standby redo log. For multiple-instance RAC databases, Data Guard shuts down the primary database if it is unable to write the redo records to at least one properly configured database instance. The maximum protection mode requires that at least one standby instance has a standby redo log and the LGWR, SYNC, andAFFIRM attributes be used on the LOG_ARCHIVE_DEST_n parameter for this destination.
and second link:-
Maximum protection This protection mode ensures that no data loss will occur if the primary database fails. To provide this level of protection, the redo data needed to recover each transaction must be written to both the local online redo log and to the standby redo log on at least one standby database before the transaction commits_. To ensure data loss cannot occur, the primary database shuts down if a fault prevents it from writing its redo stream to the standby redo log of at least one transactionally consistent standby database.
Plz correct me if i m wrong
thanx in advance -
Document for configuring Early watch alerts And issue tracking system
Hello Experts,
Iam on SAP Solution Manager 4.0 and need step wise step procedure document for configuring Early watch alerts and Issue tracking system in solman 4.0 . I hv checked Help site and other standard config docs by SAP but getting confused and things are not working ,so help shall be appreciated.
My Email id is [email protected] .
Requested to revert at earliest as iam in urgent need of it .Points guaranteed.
Thanks and Regards,
SomyaHi Somya,
setting up EWA is explained in Application help of SAP Solution Manager.
It would be helpful to know, what you have already done and what is causing problems for you.
Prerequisite to process EWA is to configure all steps described in the Basic Settings of SAP Solution Manager Configuration guide (tx SPRO).
The configuration of Issue Tracking is also described in the IMG (Basically, it's required to activate a BC Set).
Path in IMG: Basic Settings -> Standard Configuration of Basic Settings -> Solution Manager -> Basic BC-Sets for Configuration -> Activate Issue Tracking BC Set
Access the configuration guide:
- run transaction SPRO
- choose SAP Reference IMG
- expand tree SAP Solution Manager -> Configuration -> Basic Settings
- follow the steps under
"Wizard-based Initial Configuration of Basic Settings", if your SolMan system has not been yet configured or
"Standard Configuration of Basic Settings", if you have done already some configuration.
Best regards,
Ruediger Stoecker -
Database shutdowns in Maximum Protection mode
Hi,
I am using oracle dataguard 11g(11.2.0.1.0) on OEL5. My dataguard is working fine in MAXIMUM PERFORMANCE mode. But when i try to put my database mode in MAXIMUM PROTECTION MODE my database gets shutdown.What could be the possible reason for this????
Regards,
007Hello;
Quote "To ensure that data loss cannot occur, the primary database will shut down, rather than continue processing transactions, if it cannot write its redo stream to at least one synchronized standby database"
Section - 1.4 Data Guard Protection Modes - Data Guard Concepts and Administration 11g Release 2 (11.2) E10700-02
From section 5.1 of the same document ( Maximum Protection )
"Oracle recommends that a minimum of two standby databases be used to
protect a primary database that runs in maximum protection mode to prevent a single
standby database failure from causing the primary database to shut down."
Best Regards
mseberg -
Need documents for how to use OAM for APPS DBAs
Hi All,
Need documents/pdfs, how to use OAM for APPS DBAs.
Thanks a lot in advanceHi,
For R12 ,refer the Oracle E-Business Suite System Administrator's Guide - Configuration part no:E12893-03 (http://download.oracle.com/docs/cd/B53825_04/current/acrobat/121sacg.pdf)
For 11i version pls chk :
Oracle Applications System Administrator's Guide - Configuration (zipped) B13925-06 (http://download.oracle.com/docs/cd/B25516_18/current/acrobat/115sacg.zip)
--Rk -
Need Documents on FISL extraction, please send to [email protected]
Thanks,
Teja.hi reddy
this is anand send me also fisl document for [email protected]
thanking u
anand. -
Dataguard 'max protection' mode failed
Testing Dataguard in MAX PROTECTION mode on Oracle 10.2.0.4 on Solaris x86_64.
Test 1: Primary remained up allowing transactions to continue inspite of the fact that the server running the standby database was not reachable. Waited for over 10 minutes and then cancelled the test. All that happened was the protection_level changed to resynchronization. I could not believe my eyes. Is this possible?
Test 2: The primary shutdown automatically but after about 6 minutes of the standby database was shut abort. So what about all those transactions that took place during those 6 minutes? Those would be lost - isnt it?
I just cant believe this. Where am I going wrong? I confirmed that LAD_2 was set to lgwr sync affirm. And that protection mode was set to 'maximum protection'.
Somebody, pls enlighten me?
Thanks
Edited by: user12022918 on 27-May-2013 08:42If you have several physical standby database for the same primary database then this could be expected behaviour otherwise this looks like a bug that you should report to Oracle Support who will very likely ask you to upgrade at least to 10.2.0.5 patchset or 11.2.0.3.
-
XI/PI: need to create configuration from backend service interface to file
Hi All,
I need to create configuration in which i have to map my backend service interface to file document.
For example i have interface CreateOrderInformation_Out which is coming from abckend and i want to store those details in a file on external/desktop via XI/PI.
Can someone guide me with detailed steps involved in this?
Which communication channel to use?How to create that channel?
Thanks in advance,
Regards,
UjwalHi,
your scenario will look like this:
ECC->XI->File
From ECC to XI: Use ABAP proxy (no communication channel required)
From XI to File: Use file adapter (receiver communication channel required).
For creating proxy: goto transaction sproxy and create proxy of CreateOrderInformation_Out.
Call this proxy in your code to transfer data to XI/PI.e
You need to define following objects in PI:
Inbound receiver interface
Message Type (includes datatype)
Refer to SDN and SAP help for step by step tutorials.
Regards,
Gourav
Maybe you are looking for
-
Report -- How to get Options to show up in Report for a recurring payment
If you want to help, look at prudenceconservancy.org. The recurring payments I do not get in my report the Donation type. For the non-recurring payments I get the donation type (membership, Eugene Chase Farm , Stone Dock.
-
How to export message body and data from Table to Excel from outlook 2010
I usually get Employee announcement in emails and I need to compile excel sheet from all these emails to know change in status of employee from previous line to current line . Dear Concerned, The change in status of the following employee has been ca
-
Folder not showing up in Finder
When I open Finder from the Dock and navigate to /Library, the folder InputManagers does not appear in the list window. However, when I search for InputManagers with Spotlight, Spotight finds the InputManagers folder and when I click on the folder in
-
How can I get layers that are inside tables that are inside another layer to appear properly in Internet Explorer. It works fine in Firefox and Safari on Mac and PC? The layers that are causing the problems contain a table with an image and a caption
-
Digitizer stylus support Yoga 13
I'm using the Yoga 13 for about 2 weeks now and I'm very happy with the device! Does the Yoga have digitizer stylus support? And can you recommend a stylus for the Yoga? Thanks Bmelk