Need documentation about AD msRADIUSFramedIPAddress field

I have a support case open with Watchguard regarding the msRADIUSFramedIPAddress AD field.
my Problem is that the above mentioned field saves ip address as 4 Byte signed integer.
I found info about the field at http://msdn.microsoft.com/en-us/library/windows/desktop/ms678119(v=vs.85).aspx
But the problem is, it doesnt excatly say that the decimal value is saved as a SIGNED integer.
If i can't provide info about how the data is saved into this field, Watchguard won't change the way their firewalls Interpret the value. Problem is, once the ip address is 128.0.0.0 or higher, it is saved as a negative value and watchguard only accepts
unsigned values.
So can anyone give me some official document saying how the data is saved in the msRADIUSFramedIPAddress AD field?

Hi,
Here are some related links below for your references:
how to configure <msradiusframedipaddress> with MS IAS Server
http://social.technet.microsoft.com/Forums/windowsserver/en-US/054977c6-0cb6-4f35-ae70-6a6327f49015/how-to-configure-msradiusframedipaddress-with-ms-ias-server?forum=winserverNIS
Windows 7 - Converting IP Address to 9 Digit Decimal Number for msRADIUSFramed
http://www.microsoft-questions.com/microsoft/VBScript/31753564/converting-ip-address-to-9-digit-decimal-number-for-msradiusframed.aspx
NPS and Server-side IP Pooling
http://social.technet.microsoft.com/Forums/windowsserver/en-US/11c5a2cc-a31e-4e90-831c-4d78349f6bf5/nps-and-serverside-ip-pooling?forum=winserverNIS
Best Regards,
Amy Wang

Similar Messages

I need documentation about Logger.xml

Hi all,
Someone of you can tell where I can find documentation about the logger.xml (dtd, values for tags etc etc)
Thank you.

Hi,
<a href="http://help.sap.com/saphelp_nw04s/helpdata/en/d2/5c830ca67fd842b2e87b0c341c64cd/frameset.htm">Logging and Tracing Main Link</a> will provide you everything that you need.
<a href="http://help.sap.com/saphelp_nw70/helpdata/en/e2/75a74046033913e10000000a155106/frameset.htm">This one</a> is more specific to your question but I would recommend reading the entire book in the first link.
Hope it helps,
Roy

I NEED DOCUMENTATION ABOUT DEVELOPER 6

I NEED TO KNOW WHERE CAN I FIND DOCUMENTATION ABOUT FORMS 6 AND
REPORTS

Hi,
<a href="http://help.sap.com/saphelp_nw04s/helpdata/en/d2/5c830ca67fd842b2e87b0c341c64cd/frameset.htm">Logging and Tracing Main Link</a> will provide you everything that you need.
<a href="http://help.sap.com/saphelp_nw70/helpdata/en/e2/75a74046033913e10000000a155106/frameset.htm">This one</a> is more specific to your question but I would recommend reading the entire book in the first link.
Hope it helps,
Roy

Need information about some address fields in DQXI

I need to know the 'Content type' and 'Data field name' of the following address fields in DQXi
1. Alley
2.Building
3. HouseNumber
4. HouseSuffix
5. Lane
6. Pob Line
7. PobNumber
8. Section
9. PrefectureCode
10.DistrictName
11.Mail Stop
12. Postal Code Extension
13. GeoCode
14. Outside CityFlag

Hello Smitha,
Please post this query to the [Enterprise Information Management|Data Services and Data Quality; forum.
That forum is dedicated to topics related to Data Integration (Data Integrator, Data Federator, Text Analysis for Data Integrator, Rapid Marts, and Integration for PeopleSoft Enterprise), Data Quality (Data Quality and Data Insight), and Metadata Management.
The forum is monitored by qualified technicians and you will get a faster response there.
Also, all BO Enterprise Information Management queries remain in one place and thus can be easily searched in one place.
Thanks a lot,
Falk

Need documentation about "Model Driven Development within SAP Netweaver"

Hi All,
in my dissertation there is a topic called "Model Driven Development within SAP Netweaver" and I am looking for documentation (literature) pointing on this.
I'd prefer internet sources since I don't have time to order a book anymore.
Thanks, Johannes

https://www.sdn.sap.com/irj/sdn/advancedsearch?query=modelDrivenDevelopment&cat=sdn_all
Regards

Documentation about Screen, Menu and Field Exits

Hi all!!
I need some documentation about Screen, Menu and Field Exits.
I´m very interested specially on steps by steps.
My mail is [email protected]
Helpful posts will be rewarded.
Thanks in advance and regards,
Manuel.

Types of Exits 
There are several different types of user exits. Each of these exits acts as hooks where you can attach or "hang" your own add-ons.
Menu Exits
Menu exits add items to the pulldown menus in standard SAP applications. You can use these menu items to call up your own screens or to trigger entire add-on applications.
SAP creates menu exits by defining special menu items in the Menu Painter. These special entries have function codes that begin with "+" (a plus sign). You specify the menu items text when activating the item in an add-on project.
Screen Exits
Screen exits add fields to screens in R/3 applications. SAP creates screen exits by placing special subscreen areas on a standard R/3 screen and calling a customer subscreen from the standard screens flow logic.
Function Module Exits 
Function module exits add functions to R/3 applications. Function module exits play a role in both menu and screen exits.
When you add a new menu item to a standard pull down menu, you use a function module exit to define the actions that should take place once your menu is activated.
Function module exits also control the data flow between standard programs and screen exit fields. SAP application developers create function module exits by writing calls to customer functions into the source code of standard R/3 programs.
These calls have the following syntax:
CALL CUSTOMER-FUNCTION 001.
Field Exits
Field exits allow you to create your own programming logic for any data element in the Dictionary. You can use this logic to carry out checks, conversions, or business-related processing for any screen field. Example: The data element BBBNR identifies a companys international location number. You might want to set up your R/3 System so that all international location numbers are larger than 100.
The field exit concept lets you create a special function module that contains this logic.
You assign the special function module to the data element BBBNR. You then assign the module to any programs and screens in which users can add new international location numbers. When you activate your field exit, the system automatically triggers your special routine whenever a user enters a company location number.
In 4.6c, you can use "RSMODPRF" program to create field exits.
An example of a user exits :-
MODULE user_exit_0001 INPUT
 CASE okcode.
 WHEN 'BACK OR EXIT'.
 CASE sy-dynnr.
 WHEN '100'.
 SET SCREEN 0.
 LEAVE SCREEN.
 WHEN '200'.
**** Note that you can write any code that satisfy your needs. ****
**** But in this case, this was wrote as a sample code for reference sake. ****
**** And you can test it. ****
 SET SCREEN 100.
 LEAVE SCREEN.
 ENDCASE.
 ENDCASE.
reward points if it is usefull..
Girish

Need explanation about Oracle documentation (DBMS_LOB.LOADCLOBFROMFILE)

Hello World,
I try to understand Oracle documentation about DBMS_LOB.LOADCLOBFROMFILE function.
I am not shure the explanation is written in a very good english,
but i can't understand a word !!!
Is anybody could explain me in more simple sentences ??
DBMS_LOB.LOADCLOBFROMFILE (
dest_lob IN OUT NOCOPY BLOB,
src_bfile IN BFILE,
amount IN INTEGER,
dest_offset IN OUT INTEGER,
src_offset IN OUT INTEGER,
src_csid IN NUMBER,
lang_context IN OUT INTEGER,
warning OUT INTEGER);
Oracle documentation explanation :
src_csid Character set id of the source (BFILE) file.
lang_context (IN) Language context, such as shift status, for the current
load. (OUT) The language context at the time when the
current load stopped, and what the next load should be using if
continuing loading from the same source. This information is
returned to the user so that they can use it for the continuous
load without losing or misinterpreting any source data. For the
very first load or if do not care, simply use the default 0. The
details of this language context is hidden from the user. One
does not need to know what it is or whats in it in order to
make the call
warning (OUT) Warning message. This indicates something abnormal
happened during the loading. It may or may not be caused by the
users mistake. The loading is completed as required, and its up to the
user to check the warning message. Currently, the only possible
warning is the inconvertible character. This happens when the
character in the source cannot be properly converted to a character in
destination, and the default replacement character (e.g., ?) is used in
place. The message is defined as warn_inconvertable_char in
DBMSLOB.

I am not kidding. I posted the link but I did not check if it were the same source. Really I do not have time to realize it.
I think you can get a fast answer in SQL & PL/SQL forum.
Good Luck!
Joel Pérez

Need information about unicode

Hello friends,
I need informatiion about an unicode to change english language in to regional language.Please give me information about same.
Thanx,
Rahul Talele

Hi
Hope it will help you,.
Reward if help.
The Link will be helpful to you.
Re: Upgrade 4.6 to ECC - What are the responsibilites
regarding Unicode influence in Standard programs
Very good document:
http://www.doag.org/pub/docs/sig/sap/2004-03/Buhlinger_Maxi_Version.pdf
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d37d1ad9-0b01-0010-ed9f-bc3222312dd8
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/589d18d9-0b01-0010-ac8a-8a22852061a2
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f8e316d9-0b01-0010-8e95-829a58c1511a
You need to use the transaction UCCHECK.
The report documentation is here
ABAP Unicode Scan Tool UCCHECK
You can use transaction UCCHECK to examine a Unicode program set for syntax errors without having to set the program attribute "Unicode checks active" for every individual program. From the list of Unicode syntax errors, you can go directly to the affected programs and remove the errors. It is also possible to automatically create transport requests and set the Unicode program attribute for a program set.
Some application-specific checks, which draw your attention to program points that are not Unicode-compatible, are also integrated.
Selection of Objects:
The program objects can be selected according to object name, object type, author (TADIR), package, and original system. For the Unicode syntax check, only object types for which an independent syntax check can be carried out are appropriate. The following object types are possibilities:
PROG Report
CLAS Class
FUGR Function groups
FUGX Function group (with customer include, customer area)
FUGS Function group (with customer include, SAP area)
LDBA Logical Database
CNTX Context
TYPE Type pool
INTF Interface
Only Examine Programs with Non-Activated Unicode Flag
By default, the system only displays program objects that have not yet set the Unicode attribute. If you want to use UCCHECK to process program objects that have already set the attribute, you can deactivate this option.
Only Objects with TADIR Entry
By default, the system only displays program objects with a TADIR entry. If you want to examine programs that don't have a TADIR entry, for example locally generated programs without a package, you can deactivate this option.
Exclude Packages $*
By default, the system does not display program objects that are in a local, non-transportable package. If you want to examine programs that are in such a package, you can deactivate this option.
Display Modified SAP Programs Also
By default, SAP programs are not checked in customer systems. If you also want to check SAP programs that were modified in a customer system (see transaction SE95), you can activate this option.
Maximum Number of Programs:
To avoid timeouts or unexpectedly long waiting times, the maximum number of program objects is preset to 50. If you want to examine more objects, you must increase the maximum number or run a SAMT scan (general program set processing). The latter also has the advantage that the data is stored persistently. Proceed as follows:
- Call transaction SAMT
- Create task with program RSUNISCAN_FINAL, subroutine SAMT_SEARCH
For further information refer to documentation for transaction SAMT.
Displaying Points that Cannot Be Analyzed Statically
If you choose this option, you get an overview of the program points, where a static check for Unicode syntax errors is not possible. This can be the case if, for example, parameters or field symbols are not typed or you are accessing a field or structure with variable length/offset. At these points the system only tests at runtime whether the code is sufficient for the stricter Unicode tests. If possible, you should assign types to the variables used, otherwise you must check runtime behavior after the Unicode attribute has been set.
To be able to differentiate between your own and foreign code (for example when using standard includes or generated includes), there is a selection option for the includes to be displayed. By default, the system excludes the standard includes of the view maintenance LSVIM* from the display, because they cause a large number of messages that are not relevant for the Unicode conversion. It is recommended that you also exclude the generated function group-specific includes of the view maintenance (usually L<function group name>F00 and L<function group name>I00) from the display.
Similarly to the process in the extended syntax check, you can hide the warning using the pseudo comment ("#EC *).
Applikation-Specific Checks
These checks indicate program points that represent a public interface but are not Unicode-compatible. Under Unicode, the corresponding interfaces change according to the referenced documentation and must be adapted appropriately.
View Maintenance
Parts of the view maintenance generated in older releases are not Unicode-compatible. The relevant parts can be regenerated with a service report.
UPLOAD/DOWNLOAD
The function modules UPLOAD, DOWNLOAD or WS_UPLOAD and WS_DOWNLOAD are obsolete and cannot run under Unicode. Refer to the documentation for these modules to find out which routines serve as replacements.

Pop up Window before saving remembering the need (forcing) to fill required fields in a form

Hi!
I searched the "old" forum and have very good help from UVSAR but unfortunately I'm not able to access my message sent to that forum anymore.
[I could never thank all the people who answered because I keep receiving "Your submission has triggered the spam filter and will not be accepted.""]
I've have never use Java scripts in my life: I started about three days ago.
1) I'm using Adobe Acrobat Pro X (Windows 7)
2) I've created a form using Microsoft Word and save it as a pdf file.
3) After I created a form using Acrobat Pro X;
3.1.) This form it's not going to be submitted over Internet. It will be send by e-mail to some persons. They will receive it, fill in the form and send it back to me via e-mail. Note: I will save it with extended rights in order to allow to be read with acrobat reader (I'm the only one of the group having Professional edition).
4) In that form I've created some text fields (for now it's just what I need - no radio buttons, dropdown
menus, and so...)
5) Choosed Properties and marked 7 fields as "required";
6) Used a script I found in here: http://forums.adobe.com/thread/784322 (thank you for the authors of the thread)
if (!event.target.valueAsString) {
app.alert("My text My text", 3);
7) This script allows me to remember people to fill that 7 specific fields (when using mouse or tab).
8) So... What I really need? Here are the reasons for my request for help:
8.1.) When people use the Acrobat Reader Save button (not a button I created inside the form) it will pop up an alert message. Users will receive a pop up window telling them they need to fill those fields before saving the form and send it back to me. Can someone share a script, please? Thanks in advance.
8.2.) Is there a way to colorize the fileds that need to be filled? Again I only learned where to insert a java script yestaerday sou I'm not able to write one. I'm sorry for my newbie questions.
8.3.) Last question: In one of the fields there will be an e-mail address. On the end of the form I want to create a button like "Send by e-mail" and When someone press that button the e-mail will be sent to the address that was written in the earlier specific field. How can I do this (link a button to an e-mail address in a specific field)? Can someone help me with a script or ideas? Hope I was clear.
8.1.) UVSAR sent me the following code that works fine untill I save the document for the first time. Affter that he never shows me pop up window again.
var isFilled = true;
for (var i=0;i < this.numFields;i++){
var f = this.getNthFieldName(i);
if (this.getField(f).required && !this.getField(f).valueAsString) isFilled = false;
if (!isFilled) app.alert("You must complete all the required fields");
8.3.) With the help of UVSAR I used:
var mailto = this.getField('emaddr').valueAsString;
if (mailto!='') this.mailForm({ bUI:true, cTo:mailto, cSubject:"This is the subject", cMsg: "This is the body of
the mail." });
else app.alert("Cannot submit form until the email address field is completed");
but gives me an error (Note: I named the filed with e-mail "emaddr")
Once again Thank you so very very much to all the kind people who take their time to share knowledge...
I'm not a native speaker, sorry for some errors
Best regards
AC

Hi Winnie
Unfortunately I have been sick and did not read the message before. I apologize.
I have not received help beyond what is on the page. But when I get I tell you.
I hope you can get answers. If you receive, I ask that you share with me.
thank you very much
best regards
AC
Date: Mon, 27 Feb 2012 09:33:10 -0700
From: [email protected]
To: [email protected]
Subject: Pop up Window before saving remembering the need (forcing) to fill required fields in a form
 Re: Pop up Window before saving remembering the need (forcing) to fill required fields in a form
 created by Win_Form in Forms - View the full discussion
Hi ACI wonder if you can share any responses on to your question above?I too have never used a script but, I have the same problems as you in regards to building a form. And wants to have the same 'protection' and message reminders for the end users. Any information, including a script and/or a contact email of experts you can share with me will help tremendously. Thank you so much in advance. Winnie
 Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4232307#4232307
 To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4232307#4232307. In the Actions box on the right, click the Stop Email Notifications link.
 Start a new discussion in Forms by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

How do I access compacted mail on a Mac version 10.5.8 stuck with Thunderbird version 16.0.2 ? I am unable to access needed documentation for Taxes, etc

How do I access compacted mail on a Mac version 10.5.8 stuck with Thunderbird version 16.0.2 ? I am unable to access needed documentation for Taxes, etc

Where in the world did you read Deleting All My Mail? I have reread my answer several times and cannot seem to find that in there.
When you mark a message for deletion it does just that. It marks it for deletion and hides the message. It is not truly deleted until you compact.
My point is that unless you deleted your important mail they should still be there somewhere.
Your question was about compacting and thinking it put your messages in a nice little box for safe keeping and now you want to open it.
I have to agree that Thunderbird did a horrible job of naming this process because most are like you and do not understand what it actually does. I included the link to the explanation of what compacting means in the Thunderbird world.
Your messages may still be available to your but finding them has nothing to do with compacting.
Thunderbird does not archive anything unless you use that process by selecting the message and pressing a. You have the option to setup where you want that archive to go and what folders to make.
The All Mail folder is a goofy gmail arrangement. If you have problems with that then you need to address that with Google.
If you go into your gmail account on the gmail site do you see the messages you are hunting in the All Mail folder there?

USER DEFINED F1 documentation for seelction screen fields.

I have one selection screen in my Program.
If I give F1 , It has to display user defined documentation.
like...I have customer field in selection screen.
Select-options:S_CUST for BSAD-KUNNR.
For this I need doc as "Enter customer number excluding from the Table"
Not the documentation of the KUNNR field.
How to do this.
Many Thanks!!!

Hi
You can write what you want to dysplay your text. For example I created a document (type SIMG) by SO72 and this is the code to call it:
FORM MY_F1_FOR_S_CUST.
DATA: T_LINE LIKE TLINE OCCURS 0,
        XHEAD LIKE THEAD,
        HELP_INFO LIKE HELP_INFO,
        TEXC LIKE SY-UCOMM OCCURS 0,
        V_OBJECT LIKE DOKHL-OBJECT.
Costants
DATA: PREF_SIMG(4) VALUE 'SIMG',
        DOCID_HY LIKE DOKHL-ID VALUE 'HY'.
Object name
CONCATENATE PREF_SIMG MY_OBJECT INTO V_OBJECT.
Get Text
CALL FUNCTION 'DOCU_GET_FOR_F1HELP'
       EXPORTING
            ID       = DOCID_HY
            LANGU    = SY-LANGU
            OBJECT   = V_OBJECT
       IMPORTING
            HEAD     = XHEAD
       TABLES
            LINE     = T_LINE
       EXCEPTIONS
            RET_CODE = 1
            OTHERS   = 2.
CASE SY-SUBRC .
    WHEN 0.
Dysplay text
      GET CURSOR FIELD HELP_INFO-DYNPROFLD.
      HELP_INFO-DOCUID         = DOCID_HY.
      HELP_INFO-DOCUOBJECT     = V_OBJECT.
      HELP_INFO-SPRAS          = SY-LANGU.
      HELP_INFO-PROGRAM        = SY-REPID.
      HELP_INFO-DYNPRO         = SY-DYNNR.
      HELP_INFO-DYNPPROG       = SY-REPID.
      HELP_INFO-PFKEY          = SY-PFKEY.
      HELP_INFO-FIELDNAME      = HELP_INFO-DYNPROFLD.
      CALL FUNCTION 'HELP_DOCULINES_SHOW'
           EXPORTING
                HELP_INFOS     = HELP_INFO
                OVERLAY_HEADER = XHEAD
           TABLES
                EXCLUDEFUN     = TEXC
                HELPLINES      = T_LINE.
    WHEN OTHERS. MESSAGE S720(SH).
ENDCASE.
ENDFORM.
Max
Message was edited by: max bianchi

I need information about ESS and Training and Work Experience

I need information about ESS and Training and Work Experience.
Anyone know if there is something inside of the component ESS about Training and Work Experience (infotypes 22 and 23)?
I appreciate information.
Thanks.

Marciano,
check this documentation
http://help.sap.com/saphelp_erp2005/helpdata/en/4d/c19ce6ef2842258283afc35a54172a/frameset.htm
Thanks
Bala Duvvuri

Extracting informations about rectangles, lines, fields etc from PDF

I'm looking for a way, to extract rectangles, lines, fields etc from a PDF, for example think of a blue rectangle which is drawn in a Word document, which is later exported to pdf. I need informations about the position of the rectangle, the color, the size, if it is filled or not, etc. Is there something like an API or an SDK which can help me? I searched for quite a time (so please, no RTFM-answers), but the only references I found where about producing PDF or extracting text, images or graphics (oh, just at the moment, I had the idea, that lines and rectangles could be coded as vector-graphics in PDF, could that be possible?).
I'm thankful for all answers and ideas (even if you just post links with informations),
kind regards,
Pivo

Yes, lines and rects are coded as vector graphics (or specifically path drawing instructions) in a PDF.
Adobe offers an SDK around Adobe Acrobat which would enable you to get this information. If you need a standalone solution, we also offer our full PDFLibrary.

Need explanation about DBMS_LOB.LOADCLOBFROMFILE

Hello World,
I try to understand Oracle documentation about DBMS_LOB.LOADCLOBFROMFILE function.
I am not shure the explanation is written in a very good english,
but i can't understand a word !!!
Is anybody could explain me in more simple sentences ??
DBMS_LOB.LOADCLOBFROMFILE (
dest_lob IN OUT NOCOPY BLOB,
src_bfile IN BFILE,
amount IN INTEGER,
dest_offset IN OUT INTEGER,
src_offset IN OUT INTEGER,
src_csid IN NUMBER,
lang_context IN OUT INTEGER,
warning OUT INTEGER);
Oracle documentation explanation :
src_csid Character set id of the source (BFILE) file.
lang_context (IN) Language context, such as shift status, for the current
load. (OUT) The language context at the time when the
current load stopped, and what the next load should be using if
continuing loading from the same source. This information is
returned to the user so that they can use it for the continuous
load without losing or misinterpreting any source data. For the
very first load or if do not care, simply use the default 0. The
details of this language context is hidden from the user. One
does not need to know what it is or whats in it in order to
make the call
warning (OUT) Warning message. This indicates something abnormal
happened during the loading. It may or may not be caused by the
users mistake. The loading is completed as required, and its up to the
user to check the warning message. Currently, the only possible
warning is the inconvertible character. This happens when the
character in the source cannot be properly converted to a character in
destination, and the default replacement character (e.g., ?) is used in
place. The message is defined as warn_inconvertable_char in
DBMSLOB.

I am not kidding. I posted the link but I did not check if it were the same source. Really I do not have time to realize it.
I think you can get a fast answer in SQL & PL/SQL forum.
Good Luck!
Joel Pérez

Is there any Documentation about MDM4J (Java API) ?

Hello to all,
I was wondering... Is there any possibility to get documentation about the classes in the MDM4J.jar ?
We can not use the other Java Api, and we need to understand this one.
Thanks in advance,
Mariano.-

Dee Bishnu wrote:
You're looking for documentation in addition to the javadoc included with MDM4J, right?.-
Exactly, but, I don't have the javadoc that are included with MDM4J. Are the javadocs always shipped with the MDM4J.jar?
RDNPrasad wrote:
Hi Mariano,
all the documentation is available via the MDM documentation center on SAP Service Marketplace:
http://service.sap.com/installMDM
Yes, but in that adress you only see the last documentation, and I want an old documentation that isn't found there.
Nico Razlow wrote:
hier is the link to the Java API SP3 (mdm4j):
https://websmp209.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700007403222005E
Thanks !! That PDF was really helpful !!!
Sudheendra Puth wrote:
To work on java api using MDM4J use the below link on javadoc
http://help.sap.com/javadocs/MDM/SP06P2/index.html
Kindly award points if it was helpful
That adress is the documentation for the "New Java API", not the MDM4J.
I'm going to put the question as answered because the PDF that Nico provided is like a javadoc. If anyone has any more information, please contact me privately.
Thanks to all for the Answers !!!
Mariano.-

Need documentation about AD msRADIUSFramedIPAddress field

Similar Messages

Maybe you are looking for