Need documents for testing siteminder, thanks!

Hi!
We have configured Siteminder for our EP.
We need some procedure to systematically test it.
Please share your knowledge. Thnaks!!

HI Cz,
Can you share the procedure that you've used to integrate EP with siteminder. I have a similar requirement and would like to get some help.

Similar Messages

Can i install Adobe Premiere Pro 7 -AND- Premiere CS4 TOGETHER on XP?? NEED THIS FOR TESTS!!

Hello volks, i have a question.
I want to install Adobe Premiere 7 AND Adobe Premiere CS 4 TOGETHER on Windows XP.
I need this for testing somethings.
Is this possible, or make this more problems i need??
Thank you a lot for help!
Best regards
Wanderer

Install 7 first and then CS4, otherwise you will run in all kinds of mysterious problems. If you already have CS4 installed, first deactivate, uninstall, run Clean script several times, rebooting in between, install 7, install CS4, activate and run the updates.

Need documents for how to use OAM for APPS DBAs

Hi All,
Need documents/pdfs, how to use OAM for APPS DBAs.
Thanks a lot in advance

Hi,
For R12 ,refer the Oracle E-Business Suite System Administrator's Guide - Configuration part no:E12893-03 (http://download.oracle.com/docs/cd/B53825_04/current/acrobat/121sacg.pdf)
For 11i version pls chk :
Oracle Applications System Administrator's Guide - Configuration (zipped) B13925-06 (http://download.oracle.com/docs/cd/B25516_18/current/acrobat/115sacg.zip)
--Rk

Document for test scenarios in Construction

Hi
Does anyone has documents with test scenarios(steps) in SAP SD for Construction business.
Please mail the same to my mail id, Urgent help needed
Regards
Hitesh

Hello!
Did you check at the Best Practices website?
You can find some scenarios steps in the document "Business Process Documentation": http://help.sap.com/bp_eco604/BBLibrary/Documentation/447_BPP_EN_US.doc
http://help.sap.com/bp_eco604/BBLibrary/HTML/447_EN_US.HTM
The link to the Construction Best Practices is http://help.sap.com/bp_eco604/ECO_US/HTML/index.htm
I hope this helps.
Regards,
Rafael

Need documents for sap scripts

hi friends,
I am fresh Abaper.I hav to study sap script . I need document which describes basic script coding procedure ie syntax.
Thank u

hi
kavitha go through these links
SAPScripts
http://esnips.com/doc/1ff9f8e8-0a4c-42a7-8819-6e3ff9e7ab44/sapscripts.pdf
http://esnips.com/doc/1e487f0c-8009-4ae1-9f9c-c07bd953dbfa/script-command.pdf
http://esnips.com/doc/64d4eccb-e09b-48e1-9be9-e2818d73f074/faqss.pdf
http://esnips.com/doc/cb7e39b4-3161-437f-bfc6-21e6a50e1b39/sscript.pdf
http://esnips.com/doc/fced4d36-ba52-4df9-ab35-b3d194830bbf/symbols-in-scripts.pdf
http://esnips.com/doc/b57e8989-ccf0-40d0-8992-8183be831030/sapscript-how-to-calculate-totals-and-subtotals.htm
SAP SCRIPT FIELDS
http://help.sap.com/saphelp_erp2005vp/helpdata/en/d1/8033ea454211d189710000e8322d00/content.htm
regards
Nagesh.Paruchuri

Need document for User profile.

Hi,
Can you please let me know where i will get the complete document for User profile.
Thanks
Utsav

Hi
The purpose of the status profile to restrict the Std business transaction.
Follow the link
http://help.sap.com/saphelp_crm30/helpdata/en/73/29943a7acb9023e10000000a114084/content.htm
Regards,
S.Babu

Need client for testing Tandberg Codec

Does anyone know of a PC/Mac/iOS software client that I can use for testing direct enpoint to endpoint video calling? I have a C40 on my LAN and want to call it from outside the network so I know all my firewall settings are correct as well as the endpoints.
Thanks,
-mike

Mike,
One option is to use Cisco free Jabber account. You can signup here (https://www.ciscojabbervideo.com/?x=GefRiQtCq84A*P5r3iRI5Q) and is a great way to test external access.
John

Need Document for BPS

Hi.,
I am new to BPS. Can any one send me the documents for BPS or links which has step by step procedure
Thanks,
Selva

check link
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/ab9fd590-0201-0010-2590-be78eb70015c

Need Document for Oracle BI administratrion

Hi,
I am new to Oracle BI. Can some one direct me to User guides and Administration documents for oracle BI ?
Regards,
Rohit Vamsi

Hi,
10g documents: http://docs.oracle.com/cd/E10415_01/doc/nav/portal_booklist.htm
11g Documents: http://docs.oracle.com/cd/E23943_01/bi.htm
Thanks

Need Documents for BI HR functionality.

Hi All,
I need some documents to understand BI-HR like data sources , cubes , start routines , bex query customization...etc.
Thanks in Advance
Regards,
D.Joshi

Hi,
This question is discussed several Times in SDN.So plz check SDN before Posting.
HR :
In HR you will have sevaral Modules like PA,Payroll etc..........
http://help.sap.com/saphelp_nw70/helpdata/en/2a/77eb3cad744026e10000000a11405a/frameset.htm
Connect to above link the click on Pa (pERSONAL aDMINISTRATION) Then you will get allthe details like Cube,DSO,IOBJ's , Query etc...............
Follow the same for all other areas.
Regards
Ram.

Need documents for interfaces and extensions and forms...

hai friends,,
i need to assist my functional team..for creation of functonal design for reports , interfaces and extensions and forms...
can aby body send me the documents or post here??
Thanks in advance...
regards
anand

Hello,
try these:
Universe Design on RDBMS:
http://help.sap.com/businessobject/product_guides/boexir31/en/xi31_designer_en.pdf
Universe Design on OLAP:
http://help.sap.com/businessobject/product_guides/boexir31/en/xi3-1_sap_olap_universes_en.pdf
WebI:
http://help.sap.com/businessobject/product_guides/boexir31/en/xi3-1_web_intelligence_java_report_panel_en.pdf
http://help.sap.com/businessobject/product_guides/boexir31/en/xi3-1_web_intelligence_formulas_functions_calculations_en.pdf
Regards
-Seb.

Needed Document for upgrading Oracle forms and reports 10g to 11g

Hi Guys,
Currently my client is using Oracle 10g for forms and reports and currently he is looking to upgrade from 10g to 11g.
Can some one provide me the impact analysis document which shows if they is any risk factors involved if we migrate from 10g to 11g.
If any risk factors are involved what steps needs to be taken care before we upgrade from 10g to 11g.
Guys please respond me ASAP.
Regards,
Venkat.@

Guys can you respond on my post?and help me to come out of that issue.

Need Methods for Testing Hardware -- Dual 2.0 GHz Won't Boot

Have a Dual 2.0GHz Power Mac (M9032LL/A) that won't boot.... I'd like to know how hardware is diagnosed on these machines? I hear the Apple Hardware Test CD isn't that accurate and not really any help and there's no LED lights on the logicboard of these models, so, short of swapping stuff out, how do I tell what's bad? I'm assuming either a processor, the logic board, or maybe the video card are bad and would like to verify what may be wrong.
The computer doesn't boot reliably but once it is on, it works great. When the power button is pressed, there's no chime, but it makes the other usual appropriate noises, such as the fans and hard drive briefly kicking up and back down... then no more progress. The mouse never lights up (it's optical and flashes when the computer starts up normally), no video ever shows, and the computer just sounds like it's sitting idle-- the fans are slightly on, but the hard drive makes no noise. After several minutes, the fans begin to go into overdrive (the wind-tunnel sound) and I just have to shut it off with the power button.
This problem has become increasingly more bothersome over time-- it used to happen only occasionally. Now the computer won't start on its own at all. Booting into open firmware has tricked it into booting, but has become less and less reliable (described below).
+For those that may be able to help further than recommending hardware testing methods, here's specifics on my situation:+
Troubleshooting I've done:
- reset the PMU (can't remember if I've reset the PRAM)
- installed a new power supply
- tried a different monitor and power cord
- installed a new battery
- re-seated video card
- removed the two sticks of third party RAM... when I booted after doing this, the boot got further. This time the computer acted like it was on, but with no video... it responded to the keyboard (volume and eject) and appeared to show up on the network. I checked monitor by plugging it into laptop, and the monitor worked fine, so I assumed the computer's not outputting any video. Force-shut-down and rebooted the computer, but it went back to the same boot problem described above (fans went into overdrive).
In the past I have successfully booted it by booting into open firmware, then typed 'mac-boot' and the computer starts up and works completely fine. It's not flakey, doesn't crash, etc. However, it won't reliably boot into open firmware!
I've also successfully booted into single-user mode. Both in this mode and in open firmware, the fans will go into wind-tunnel mode after about the several minutes as it does when booting via power button alone. However, the command line is still responsive, and a boot command stops the wind-tunnel noise as the computer then boots.
I'd really like to rescue this computer, it's such a speedy, reliable machine that's given me years of excellent performance. If it's time to let it go, I'd like to know for sure, so a way to test the hardware, especially the logicboard and processors, would be nice...
Many thanks for any help,
Selena M.

To those that offered help, thanks, I appreciate it and ended up finding the problem using the most basic hardware test of all-- remove one of the parts on the suspect list, so long as the computer can run with out it, and see what happens, and that resolved my issue!
To those having the same problem-- I found a fix for my machine and it's working great!!! The primary suspects were: logic board, RAM, CPUS or video card. If it was the logic board or a CPU, I'd just call it a parts machine, so tried removing the other parts to see what happened. Still crashed/didn't boot without the third party RAM, and also no difference without the Apple RAM.... but when I removed the video card and hit the power button-- there was that startup chime I hadn't heard in so long!!!!! The machine booted immediately and responded properly to the keyboard's volume and eject buttons. Since I couldn't attach a monitor, I accessed it over the network and it was working fine. I shut down and booted several more times, and it came on every time. So, if those of you that are having the same problems haven't tried this, see if your computer boots without the video card...
*Best of all*, the new video card was free! Apparently the card in my machine has known issues and they'll replace it for free if you send them your old one AND mention this article: http://docs.info.apple.com/article.html?artnum=32473. Read through it, and if your video card matches that model number they list, call the phone number they provide. Make sure you mention the article number, which is 32473, so they can reference it and so they won't charge you an over the phone tech support fee (because this is for a recall). They'll look the article up, ask you what you did and so on. Tell them you tried everything the article suggested and that your computer behaves as the article describes, and they'll send a new card.
Also, note that I'd seen this article before when trying to solve my booting issue, but my computer didn't behave exactly like they described, so I just kinda blew it off. But later, while skimming various forums for answers, I read a post from someone with similar booting problem to mine and he offered the above tip and article number. It's a good thing too, as it saved me the cost of a video card! Otherwise, I just would have bought a new one.
Anyways, I hope this can help one of you out that are having similar problems... just remove that video card (if you haven't already) and see if your computer works. If so, get a new one for free from Apple and hopefully you'll have your computer back!
Good luck!

Need documents for SM4.0 on transports management

I have searched the entire SDN and OSS but found none.
Please help, points guaranteed.
Thanks!

Hi ,
I hope you are looking for managing tranports of various systems through Solution manager.
Change request management is the tool provided by SM to manage changes across landscape..
Complete documentation can be found at http://help.sap.com/saphelp_sm40/helpdata/en/0c/5b2160f6fa4b83a3674a210b1cdeb0/frameset.htm
To get complete flow of change request management download this sim file which you can play using sap tutor player.. which you can download at www.service.sap.com/saptutor
https://websmp104.sap-ag.de/~sapidb/011000358700005479212006e.sim
(SMP Login required)
If you are looking anything else please do come back and little bit detailedly explain your requirement...
Award points if this reply found useful
Edited by: Mrutyunjay Rao Dora on May 9, 2008 5:23 PM

HT4009 In-App purchase is turned on and still unable to purchase it. Need help for that! Thanks!!

I turned on my In-App purchase under "setting- general" but still unable to complete the purchase. Need Help!! Thanks!!!!

If you are also getting a message to contact iTunes Support then you can do so via this link and ask them why the message is appearing (we are fellow users here on these forums, we won't know why) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

Need documents for testing siteminder, thanks!

Similar Messages

Maybe you are looking for