Need Dreamweaver CS6 Help (was: Dreamweaver CS6)

everytime I seek help with dreamweaver CS6 it gives me Dreamweaver CC info. How can I get informations and answers on CS6 only?

Hi Eric,
From what I understand, we are not going to have version based documentation any more. The What's New documentation will cover topics that have changed in a particular version.
Thanks,
Preran

Similar Messages

Need Dreamweaver code coloring scheme installation instructions (for Creative Cloud CS6)

Need Dreamweaver code coloring scheme installation instructions (for Creative Cloud CS6)
I'm on a mac os x 10.7.4

Might check to see if you have an older version of Acrobat X installed previously under
Mac HD > Applications > Utilities > Adobe Installers
If you have an uninstaller for Acrobat X try uninstalling it then installing again like you did through Creative Cloud.
-Dave

I purchased creative cloud for my Flash CS6 class not knowing there was a difference and now I need Flash CS6 How do I change? I cant complete my project without it.

I purchased creative cloud for my Flash CS6 class not knowing there was a difference and now I need Flash CS6 How do I change?

You can refer to:
How to Move Adobe CC or CS6 Between Computers, or PC to Mac | ProDesignTools
Can I install both CS6 and CC apps on my computer? « Caveat Lector
Creative Cloud (CC) or Adobe CS6 – Which Should You Buy? | ProDesignTools
Regards
Rajshree

Can we use CS6 under a CC license? We have about 25 CS6 installations and need more CS6-licenses. Our other software is not (yet) compatible with CC.

We need more CS6 installations at our company. However, it's not possible to buy CS6, only CC. The software we are using in combination with CS6 is still not compatible with CC. So have have to use CS6 until that software is upgraded. Can we buy CC licenses (or membership) and use that licenses to activate new CS6 installations?

First, yes it IS possible to buy CS6 Creative Suite 6
Second, Previous via Cloud http://helpx.adobe.com/creative-cloud/help/install-apps.html#previous

I need advise and help with this problem . First , I have been with Mac for many years ( 14 to be exact ) I do have some knowledge and understanding of Apple product . At the present time I'm having lots of problems with the router so I was looking in to

I need advise and help with this problem .
First , I have been with Mac for many years ( 14 to be exact ) I do have some knowledge and understanding of Apple product .
At the present time I'm having lots of problems with the router so I was looking in to some info , and come across one web site regarding : port forwarding , IP addresses .
In my frustration , amongst lots of open web pages tutorials and other useless information , I come across innocent looking link and software to installed called Genieo , which suppose to help with any router .
Software ask for permission to install , and about 30 % in , my instinct was telling me , there is something not right . I stop installation . Delete everything , look for any
trace in Spotlight , Library . Nothing could be find .
Now , every time I open Safari , Firefox or Chrome , it will open in my home page , but when I start looking for something in steed of Google page , there is
''search.genieo.com'' page acting like a Google . I try again to get raid of this but I can not find solution .
With more research , again using genieo.com search eng. there is lots of articles and warnings . From that I learn do not use uninstall software , because doing this will install more things where it come from.
I do have AppleCare support but its to late to phone them , so maybe there some people with knowledge , how to get this of my computer
Any help is welcome , English is my learned language , you may notice this , so I'm not that quick with the respond

Genieo definitely doesn't help with your router. It's just adware, and has no benefit to you at all. They scammed you so that they could display their ads on your computer.
To remove it, see:
http://www.thesafemac.com/arg-genieo/
Do not use the Genieo uninstaller!

Help! I just put a US sim card (i am from Canada) and got a monthly pre paid plan, and when I went to restore the iphone, it didn't work. I can't find backup that i did right before the sim was changed. I really need the info that was there! Please help..

Help! I just purchased a US sim card/monthly pre-paid plan (i am from Canada) as I am travelling in the states for a month, and when I went to restore the iphone, it didn't work. I can't find backup that i did right before the sim was changed. I really need the info that was there! Please help..

Hold on,
Have you talked to your carrier to confirm the unlock?
What was the procedure you did to unlock the phone?
Standard unlocking procedure once processed by the carrier:
Backup in iTunes
Erase the phone (ignore restore terminology here)
Plug the phone to the computer and then launch iTunes
Wait for unlock notification.
Restore the backup.

I need indesign cs6 becasue I am migrating files from pagmaker. Can I download a trial version ?

I need indesign cs6 becasue I am migrating files from pagmaker. Can I download a trial version ?

Here is the direct Adobe page.
http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html

I need Encore CS6 and it is not available on Creative Cloud. Neither is Premier Pro CS6 which supposedly installs Encore CS6. I need to burn a DVD from my mpeg4 output from Premier Pro CC2014. What should I do?

I need Encore CS6 and it is not available on Creative Cloud. Neither is Premier Pro CS6 which supposedly installs Encore CS6. I need to burn a DVD from my mpeg4 output from Premier Pro CC2014. What should I do?

You should probably post your question about burning a DVD from Premiere Pro in the Premiere Pro forum
Here is a link to info regrding getting CS6 applicarions thru the Cloud with a full subscription...
Get CS6 Apps from Cloud Subscription:
Download previous versions of Adobe Creative applications -
http://helpx.adobe.com/creative-cloud/kb/download-previous-versions-creative-applications. html

Need Illustrator CS6 and can't find it in the previous version options

My son needs Illustrator CS6 for a class he's taking, and his teacher said we could download it from Creative Cloud. However, when I look in the Apps tab, under "Find new apps," and select "Previous versions" from the drop down menu, Illustrator isn't one of the options. How can I get it from Creative Cloud?

Download CS6 products
Mylenium

I have a hp dv6-1375dx was told maybe i need a motherboard Help!

i have a hp dv6-1375dx was told maybe i need a motherboard Help! i had to take out my battery because the laptop wouldnt pass the boot up process nor charge either. did i destroy the motherboard doing this or do i need a new power circuit how do i go about ordering these parts

Try a hard reset.Disconnect all external devices first.
1-remove power cord and battery
2-press power button for 30 seconds
3-reinstall only power cord for first startup.
4-power on
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

When starting Window XP on my laptop (which was connected, in the past, in a wi-fi network now no more available) appears immediatly this allert: "iTunes Helper was not installed correctly. Please reinstall iTunes. ERROR 7." Reistallation impossible!

When starting Window XP on my laptop (which was connected, in the past, in a wi-fi network now no more available) appears immediatly this allert: "iTunes Helper was not installed correctly. Please reinstall iTunes. ERROR 7."
Reistallation of older or up to date iTunes versions is impossible because: "Installation package iTunes.msi is located on a network resource not available" and because "It is impossible to remuove thew previous verson of iTunes. Impossible fto find the path."
Someone can help me ???
Thank,
Gerald

Take a look at iTunes for Windows: "Error 7" message when opening iTunes. Perhaps your .NET Framework needs a repair.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

Hard Drive Failure on HP DV 6000 Pavilion laptop Windows-XPsp3 OS - Need Data Recovery Help

Hard Drive Failure on HP DV 6000 Pavilion laptop - Need Data Recovery Help
HP Pavilion DV 6108 NR, RG365UA, purchased in late 2006 at Best Buy, with Windows XP, upgraded to Service Pack 3. It has a Fujitsu hard disk, 60 gigabyte, partitioned into C: and a Recovery D:.
Windows tries to boot up, but goes to blue screen with the message: "Unmountable Boot Volume" for one second, then just keeps recycling until I force a shutdown.
BIOS Phoenix, hard drive test result: " #1-08 Fail "
I ran a disk analysis/recovery program on the Cdrive and it seemed to show the directory structure intact, and it was able to recover some files. I was using the free one from Seagate (which only recovers small files). The second pass didn't run so well, and during the third run the program said I should not proceed further, and I should contact a professional disk recovery company.
However, the D drive seems to be intact, so, I wonder if the disk is corrupted or just some aspect of the logical C drive is bad.
How can I get the D: to run the recovery software on it? The recovery disks, made by Best Buy, only proceed to the R / F / Q option screen, and when I press R, I get a blue screen every time.
Tapping the F10 key during startup gets me nowhere. Ditto the F11 key.
I dont care about the hard disk; it is the data (files, docs, images, etc) that I want.
I contacted HP to order recovery disks but they are no longer available for my computer.
Any suggestions would be greatly appreciated!
Jon
This question was solved.
View Solution.

Update...
I found a website that offers the following:
http://www.computersurgeons.com/p-13442-recovery-kit-435422-001-for-hp-model-number-dv6108nr.aspx
Recovery Kit 435422-001 For HP Model Number dv6108nr
Price: $27.00
Recovery Kit Set (An Entire Image of the Computer hard drive when the computer was new)
But I wonder how useful it would be. Early XP , no doubt. And if my hard disk problem is a mechanical fault, would any recovery disk even work? The disks made by Best Buy when I bought mine new in 2006 don't do anything more than go to the R /F/ Q screen and then goes to a blue screen when I press R (to recover the OS and apps and data files). And, as I wrote, it is the data that I want, not the disk drive.

Need some quick help - fairly urgent!

I've just taken over a new job and have been the task of finishing the new brochure for Christmas, there's not a lot to do but a lot of the measurements need changing
This is the layout I'm dealing with..
All the boxes have been made in Illustrator
The text has been done in In'Design and it seems every piece of text is it's own box if that makes sense
My question is, if I select the whole specification box - copy, paste it into Adobe Illustrator and change the text there, then paste the edited box back into In-Design, will I lose quality when it gets printed?
I'm worried if I do it this way it may come out blurred? Or am I just worrying about nothing?

I couldn't find an Illy file in the end and have ended up creating tables in ID to replicate what was already there!
Didn't take very long and I guess if I didn't do it now, I'd come across the same situation next time!
Date: Wed, 30 Nov 2011 08:48:07 -0700
From: [email protected]
To: [email protected]
Subject: Need some quick help - fairly urgent!
    Re: Need some quick help - fairly urgent!
    created by Peter Spier in InDesign - View the full discussion
There certainly are viable "quick fix" solutions proposed here, and if the dealine is looming and this file never needs to be touched again I might be tempted, but they are only postponing the pain for a file that needs periodic updates, and I wouldn't waste effort on them, myself, when that time can be put toward a proper rebuild now if that's the ultimate goal.
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4054725#4054725
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4054725#4054725. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in InDesign by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

In need of immediate help with FCP new user taking over colleagues position

Good Morning. I am in urgent need of some help with a specific final cut pro question. My coworker and I have been working on a video project for our employer, a university. He ran the editor (FCP) and I ran the logistics of setting things up, keeping the contacts and scheduling, etc.
He has left until late August and there are two major typos in his work which is posted to the web at the moment. I need to correct these typos and have less than a faint idea of how to do it.
First of all, what is the file's last three letters? (.doc, .mov, etc...)
Second, can I edit this as easily as I think I can? Just click in the text file along the bottom timeline and edit that way?
How do I export the movie as an mp4 file after i have edited it.
Anything else that would be deemed helpful is always appreciated!
I really appreciate the help. I was never trained on this program because I never needed to be. Unfortunately, as it turns out, I did.
Thanks for the help!

You need to locate the Project file. Which will be somewhere in your colleague's User space.
In the Finder, press command and F to activate the Find function.
Make sure the following parameters are set:
Search *This Mac* and Contents
Kind is Documents
Type the project name.
The icon looks like this:
Double click it to launch Final Cut Pro with the project.
To locate the text overlay, click on the Timeline to make it active. Use the down arrow on your keyboard to jump from one cut to the next. The text overlay will look similar to this:
Double click on the Text clip. This will place it in the Viewer (the left "monitor").
Click the "Controls" tab above the Viewer and make your changes. Press Return.
Clicking anywhere in the Timeline once more will update it.
Make sure that no clips are selected and the Timeline is the active window.
Go to the menu bar: File > Export > Using QuickTime Conversion.
In the window that opens, make sure that Format is set to QuickTime Movie.
Click the Options button. Look at the top of the next window.
Does it say Compression Setting: H264? If it does, great.
If not, click the settings button and choose H264 from the *Compression Type* button.
At bottom left, drag the Quality slider to Best. Click OK.
This brings you back to the previous window.
Click on Size if you need to change something -there are a number of presets, but you can choose a custom size if you wish. Click OK.
That window is dismissed and returns you to the Save dialog.
Type a name and choose a destination for your file.
Message was edited by: Nick Holmes

I have a First Gen IPad with IOS 4.3.2. It let's me manage my music and videos together in playlists. Need a larger capacity IPAD, that allows me to manage playlists the same way. need direction or help!

I have a First Gen IPad with IOS 4.3.2. It let's me manage my music and videos together in playlists. Need a larger capacity IPAD, that allows me to manage playlists the same way. Need direction or help!
Can't seem to find an IPAD that let's me control my playlists together...or let's me organize my videos (Karaoke) the way I want to. Can someone help or direct me?
Can't even find the old IPad for sale...I have a MB292LL with 4.3.2 (8H7)

Here is a hint, google:
ipad video playlists
Found:
This discusses some options.
iOS 7 took away the ability to play videos continuously.
Two stand-alone apps.
https://itunes.apple.com/us/app/video-playlist-manager-lite/id399302583?mt=8
https://itunes.apple.com/us/app/joobik-video-playlist-player/id502325425?mt=8
There was a hint of relabeling your videos to music video so you can use the itunes video playlists.
I have not tried this.

Greetings, I need a little help. I have a WRT54G Wirele...

Greetings,
I need a little help. I have a WRT54G Wireless Router, and it worked well for years with my Alcatel DSL Modem (Bellsouth/ATT). The modem went out and it was replaced with Westell Modem. When I bypass the router I have no problem connecting to the Internet, however when I connect the router--no connection. I thought it would not be a problem swapping the modem out. I am running XP with Norton Internet Security and Anti-virus. I have disabled Norton and do not believe that to be the problem. Do I have to reconfigure the router? If so, can I do it with the original install CD? (I am disabled and the original CD/instructions/box is in the attic and I cannot get it easily.) I have read several different threads, but they do not specifically address my problem. Any assistance is appreciated. Eddy

Many Westell modems are actually "modem-routers" and they use the same 192.168.1.1 address space as your WRT54G. This is the root of your problems.
Try the settings at this URL.
http://www.dslreports.com/faq/6323
Note that the "WAN" port on the BEFSR41 in the example is the same as the "Internet" port on your WRT54G.
Please let me know whether or not this worked for you.

Need Dreamweaver CS6 Help (was: Dreamweaver CS6)

Similar Messages

Maybe you are looking for