Need drive or firmware for Matshita DVD-R UJ-867 ATAPI

"A required CD/DVD drive is missing. If you have a driver floppy disk, CD, DVD or USB Flash drive, please insert it now".
I try the Mac OS X original installation CD, but it didn't have
the drive. So, where can I get this drive for the CD/DVD Matshita DVD-R UJ-867 ATAPI. Searched the internet, but did not find anything helpful.
Any ideas?

Microsoft offered Windows 7 as a free download originally as a Release Candidate. It's perfectly legal.
I found this from microsoft, although it's not for windows 7, others have reported it has worked, see the link: http://support.microsoft.com/default.aspx?scid=314060
In case you were wondering, no one has replied to your other postings on other sites as of tonight :P
http://forum.parallels.com/showthread.php?t=96424
http://social.technet.microsoft.com/Forums/en/w7itproinstall/thread/961fb05b-ea1 d-4ffd-b1d8-bbdf603ce03c
Here's a link from apple discussions addressing the same issue: http://discussions.apple.com/thread.jspa?messageID=7831752

Similar Messages

  • Firmware upgrade for Matshita DVD-R UJ-845E to burn dual layer DVD?

    Dear All
    I have a PowerBookG4 with a Matshita DVD-R UJ-845E which it seems apple has disabled from burning dual layer DVD. I've read around that there are firware upgrades that can enable actions again. I can't find any for Matshita DVD-R UJ-845E, though. Any ideas?
    Thank you!
    Angie
    PowerBookG4   Mac OS X (10.4.8)  

    angie1976 you have me directly.
    As stated in previous posts there have been several issues with the Matshita Optical drives that Apple has installed in there computers. Over time the problem has been discussed and it would appear that there are several things that come into play here.
    Apple has made it so that many of the drives they intall are in fact not capable of there full potential.
    It in fact boils down to an issue of Copywrite Infringment. Apple doesn't want to put itself in a position to be open to Lawsuits from the Motion Picture Industry.
    Many of the drives that do not work up to there full potential have FIRMWARE updates that are offered by the manufacture to remedy this problem and some do not.
    It has also been found that the casual user that burns DVD's isn't aware of the huige difference in the Format's available for DVD Burning. and the many limitations of these different drives as far as Media and Speed of Media is concerned. Many of the DL burners that were installed will not burn DL. Apple has had such a huge amount of dissatisfied customers that many that will take the time and if they still have AppleCare these drives will be replaced free of charge.
    Here are a collection of links that will help you to understand the problem as it exists.
    I will also say that upwards of 85% of the problems user expieriance is with POOR QUALITY MEDIA.
    http://www.digitalfaq.com/media/dvdmedia.htm
    http://www.videohelp.com/dvd
    I also noticed that some others have chimed in as to the fact that Media was not the issue. This is not entirely true.
    Here is another post that I answered that will also cover this subject that may help you understand the problem a little better.
    Let me see if I can shed some light on this issue, for you.
    Maybe some others as well can.
    There are several Applications that are standard programs that come with OSX.
    Of these, several have the ability to burn a project.
    iTunes....iMovie.....Disk Utility.
    Each of the above mentioned applications were developed for a specific purpose. However, they are capable of doing more than the original developers intended.
    The problem in my eyes is the lack of information for a new user to Mac.
    In what one would consider the perfect world, you simply choose a project, drag it in to one or more of the applications mentioned above and simply click burn and you are finished.
    This is not always the case.
    Often users are left with the issue of no clear cut direction on how to use these different burning softwares, and the ability to have a clear cut step by step user interface.
    All of the furnished OSX burning software is in fact usable and works well.
    The problem is HOW TO USE THEM.
    The more experienced users find this either to be a non issue or will take the time to work with these different applications until they figure out how to use them.
    There are of course different Advertisements and FAQ's that cover these to some degree that leave users more confused than when they started.
    One of the major issues that accompany this problem is this.
    Not all Burners that Apple uses in there machines are the same.
    Not all Burners will accept all the different Media's that are available on the market.
    Thus leaving many users confused. Not having a clear cut understanding of what the difference is between these different Media's and there use.
    http://www.videohelp.com/dvd.htm
    The above link offers an overview of this subject.
    Apple has found itself in a delima with the Motion Picture Industry, as well as The Music Industry over the issue of offering there users with the capability of copying Copyrighted material. Thus leaving them open for Law Suits.
    There was an in-depth article in one of the recent issues of Macworld Magazine, that went in-depth covering this issue.
    It is almost impossible to cover all aspects of this issue on these forums.
    There are of course different softwares available that make the burning experience much easier and user friendly.
    Roxio is one of the industry leaders in the development of Mac compatible Burning Software. They offer 2 of the industry leaders in this area.
    Toast-7 and Popcorn.
    This solves only one portion of the problem. Both of these software offering give the user the ability to copy about anything.
    However, there is so much controversy over the issue of Movie and Music copying, the manufactures of the Computers, and the Burners try to limit the users ability to copy these, and thus be clear of any Legal Issue.
    Here again rises the problem of computer users being mad because the industry has placed limitations on there ability to use there product in a fast easy to use method.
    Again there are work around to all of these issues.
    The problem then becomes who out there is willing to tell us what is the easiest most trouble free method of using these computers, burners, software,and media.
    The burner manufactures offer there burners.
    To get them to work to there full potential the users then must search out the 3rd party Firmware updates that will enable them to work properly. This is not an issue with all burners but quite a few.
    Most readers on these forums have read about the MEDIA compatibility and poor quality issues these are covered in a prior link.
    To sum this up, the resources are available to do just about anything one wants to do in the copy area.
    Not every copy problem is the same because of all the different elements that come into the equation, Burner, Media, Software, Firmware.
    So if a user has a problem and needs the information and the resources to copy there projects whatever they may be.
    Be through, give as much information as you can.
    Keep it simple, No need for the use of exotic terms that most people don't understand anyway.
    In-depth. Tell all aspects of the issue and what you have what you are using and what you want to accomplish.
    If there is an answer out there.
    Someone will Chime in.
    The users on these forums for the most part are more than willing to share in there knowledge, free of charge.
    One last thing,
    When a user gives you an answer for you problem, for the most part they believe it to be a fact. Sometimes this isn't the case, we have all been guilty of, this is not done with malicious intent. It is done trying to help.
    I personally have been misinformed, or tried a fix, that will work in one instance but not another. So tell all you can about your problem.
    Cheers Don

  • Need driver or app for ms life cam 3.0 tried to get one off the internet. cisco wireless router software said malware and virus threat. Is it safe for mac?

    need driver or app for ms life cam 3.0 tried to get one off the internet. cisco wireless router software said malware and virus threat. Is it safe for mac? is this software try to protect my pc or is it A threat to macs to.

    There are a number of extremly dubious sites which claim to offer Drivers for common Hardware, but actually are phishing for identies and credit card numbers and candidates to join a bot-net.
    Make absolutely certain you load drivers ONLY from the manufacturer's web site.

  • Satellite 5200 - Need master/slave patch for new DVD drive

    I need a patch for DVD to use in a Satellite 5200.
    My original DVD is broken, so i bought a Toshiba SD-C2512 DVD but it is not working inside the Satellite, but with adaptor at my Desktop PC.
    I have to patch the DVD to Master.
    Where can I get the file and prog to patch?

    Hi
    I think such patches that you mean are not available and as far as I know if you can switch a notebook from Master to Slave for example there is a jumper on the drive.
    However, for me it sounds like that the drive is not compatible with this notebook. Not every drive is compatible with every notebook (e. g. pin assignment, ) ;)
    You should buy another one and check the user manual. There you should find a list of compatible drives.
    Bye

  • Latest firmware for HP DVD-RAM GH40L ATA Device - DVD Burner - please

    HP Pavillion Slimline s5280a Home PC
    Operating system Windows 7 - Home Premium
    Error Message: Failed to burn disc - Can not burn end of disc at once
    Have made many enquiries to date, and the best solution so far seems to be my 'Firmware' for the product in question is out of date?
    Have tried to download driver updates from HP - but with no success!
    Can anyone offer any solutions...thank you in anticipation.

    Here is the link to the latest firmware version RB0E for your drive.
    http://ftp.hp.com/pub/softlib/software11/COL32643/pv-80854-1/sp44462.exe
    I am an HP employee.
    Regards,
    Vidya
    Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.
    ***Click on "Thumbs up" button to the bottom right side of my post to say thanks!***

  • Need driver officejet v40 for new laptop, hp with windows 7 64 bit os.

    new hp laptop...windows 7 64 bit os. need driver for old hp officejet v40 printer.

    T2, you don't mention how much system memory that you have installed.  Windows 7 will run best with 3GB of memory.  Also, integrated memory is always lacking in any games.  The 128MB is not allocated at one time.  It is only used as needed.  If you want to play games, you should upgrade your memory and upgrade to a standalone video card.  I don't believe that a driver update will make any difference.
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

  • Need driver nokia 5200 for linux fedora core 8

    Hi......
    Where i can download driver nokia 5200 for internet connectivity with nokia 5200 linux fedora core 8?
    Thanks

    The required driver is already in the kernel (cdc_acm).
    Although the N95 is used in this example, it should work for a 5200 as well:
    http://linux.sgms-centre.com/nokiafaq/mobile_broadband/
    Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

  • Need v2.0 firmware for WTR54GS Travel Router

    Does anyone have either the latest or original firmware for the travel router WTR54GS V2.0? (Not the WRT54G). Thanks.

    The travel routter that you have WTR54GS v2.0 does not have any firmware for this version. The firmware will only be available for the version 1.0
    in the Linksys/Cisco website or you can download it from  the following link: http://homesupport.cisco.com/en-us/support/routers/WTR54GS/download

  • Still need a new firmware for linksys one/cisco svr3500

    now i tried over a year to just find someting about this either firmware or manuals or someting.. it freezes after a little time
    and this didnt help me the phone support just send me around in a circle to ppl that dosent know anything and left me only with a phone bill since im from denmark
    and after all that time used for nothing and have an expensive router just collecting dust that it just not funny anymore
    1. May 10, 2010 6:17 PM (in response to Chris Rasmussen)
    Re: linksys svr3500
    Hi HightowerDK,
    Contact the BAC (Broadband Access Center) for Linksys One support if you are in the USA on 1 866 870 5826
    Regards,
    Cindy Toy
    Cisco Small Business Support
    Community Manager

    Hi,
    Thank you for your quick reply.
    My DVD drive is a SD-R6112 I found a frimware update on the page you have given searching on the model of my drive but when executing the exe file it says I don't need the update and program stopped.
    On another forum someone said the third party firmware I installed should have changed some calibration data of my drive thats why I can not read any DVD-R anymore and no firmware will fix it anymore.?
    I still can read CD's and original DVD's but I can not read DVD-R's anymore which is very annoying.
    Do you know if Toshiba technicians could re-calibrate my drive?
    Can I buy an intern DVD drive for my model?

  • Why no updated firmware for hp dvd writer 1260d? MID codes are outdated. Can't burn many disc brands

    I have an HP Pavilion a610n. The operating system is WIndows XP. No error messages. No recent installations.
    As stated, many modern brands of discs used for burning have modern MID Codes. This is especially true of Double Layer (DL) discs. Unfortunately, my HP DVD Writer 1260d (that I bought within the past two years) seems to be antiquated or on the road to being obsolete because no firmware updates are available for this model with its old, old MID Codes. (Just to get this off my chest, my second question might be "Why would I ever buy another HP computer since this one continues to be a complete headache in every way?")

    I'm having the same problem using Toast 7 to burn a Video TS movie I made. I'm using an external Lacie 16X DVD-R DL drive and an iMac G5 2.0, and Mac OS 10.4.3
    After several failures with Interface Error 5, I tried copying a DVD movie I made from another DVD. This was created with the same Lacie drive using Mac OS 10.3 and my old iMac FP 15 inch. I got the same failure message.
    I then switched my Lacie Drive to the USB port and everything is working fine. I switched it back to FireWire and I get the same error message again.
    I can play DVD's on the Lacie with either the USB or FireWire port without any problem, I just can't record using the FireWire port. The FireWire ports on the computer work fine with all my other FireWire devices.
    It must be a combination of 10.4.3, Toast 7 and Lacie FireWire. I'm going to recheck Lacie's site to make sure I have all of the updates.
    iMac G5   Mac OS X (10.4.2)   Mac OS 10.4.3

  • I need help with firmware for the MS-8348 [48x16x48x CDRW]

    Well, if Yall could help me I'd be happy.
    Ive a 900 Athlon with a pcChip mobo, and an MSI MS-8348 48x16x48x cd-RW drive. HD is primary Master, CD-rw secondary master.
    I run XP, but there is a large problem. when I try to install anything from CD, it crashes the system about 1/3 of the way through the install. Games like Sim City 3000 or NeverWinter Nights and such can't install.
    I was told that it was a firmware problem, and I needed to update it.
    How can I update, when i copy the two files included in the download to c:, run it, and it says my drive is not recognized? It told me to run in real DOS mode, but how can I get there in XP?
    Thank you for you help.
    Madruga  
     ?(

    Hi,
    On-Board sound is enabled in bios?????
    Also, you will need to update Direct-X for all features too work........
    Del

  • Need the V20 firmware for N97!!!

    Hey Nokia, you announced the latest firmware to be available in october, but we are in the late october now and still no V20 available for N97...I`m very dissapointed on this fact,because I spent a lot of money buying this phone!Maybe you forgot to mention what october...2010,2011 or else???Don`t let us wait so much,pls!!!This phone really needs updating...its look is far different from its performance and I think every N97 user agree with this.Can`t wait for the update!No offence still!

    I think it is wrong to count down the days, v20 will come when it comes. Past experience should teach you Nokia may well release it in December. They will do so when THEY are ready and in the mean time they will not confirm or deny anything, that is the way they are.
    If i make a commitment to do something next Friday, then realise by Wednesday that I will not be able to, I would contact you and explain why and the estimated delay, basic manners !!! Nokia will not.
    But Rant on if it makes you feel better, like it or not, that is all you will achieve. Actually No! you will not feel better untill you get v20. It wont fix the bugs you hoped it would and it starts all over again.
    Here is an idea. Get used using your 97 as it is. Dont update to v20 because you will only get frustrated learning ways to overcome the newe flaws in it. Shut this forum down and live happily ever after.
    George
    De Criminalised 0570817: RM-505_EMEA_EURO_QW1 Black on Vodafone

  • Need driver (*.inf) files for HP OfficeJet 5610 All-in-one

    I am setting up a print server and it needs *.inf driver files for my HP OfficeJet 5610 All-in-one printer. Where can i find them? I've installed the drivers on my PC, but they come as *.exe files that will not extract to give the *.inf files. Can anyone help?

    Hello, First I would like to say that I dont like what HP does, I dont want all your software cloging up my computer. What I want if for the hardware I have purchased from you to work the way I want to. Nothing more nothing less. Please give your customers the chance to pick the software they want and not fill up the pc with trash.
    PlanoStar You will find the x86 inf file in the Windows XP Package, it about an 68mb download, just extract EP-CDB-enu_NB.exe using Winrar.
    And ofcourse after the hours spent, with HP trolling you, you would think you are done. Think again. Microsoft will pick up the tradition with some Install x86 Medea ntprint.inf BS. to solve this problem download the files needed from here.
    It will save you hours instead of mounting AIO images and whatever.
    Ps. I have just registered with HP with the sole reason of making this post, and I would just like to say that hp support is rubbish.

  • The issue is menu making.  I need a larger selection for a DVD about the Sea - water - Ocean!  Jack

    I have been a adobe customer for a long time.  I am using this internet system not knowing how to speak with a representative, although I can speak with the support team, who suggested I go to this forum method.  I have submitted a question regarding menu.  My program has only a few and I am searching for a way to be able to buy more like I would for instance with making DVD Jewel Cases - some 1,120 were offerred for my Sea of Love DVD.  I need to look good as this is a very top professional work that will sell well, but I don't have an appropriate menu.  As I recall, a previous Premeir Elements Program I had - in fact had a good Menu of under the sea or ocean.  Can you begin to help me with what otherwise should be a simple issue.  Please email me at [email protected] if you can help and let us begin some discussion on this important subject your company should feel to be serving to a customer.  I also will now go to all the instructions available and have used the internet, but I do not presently have internet and using my public library and all I need for general use.  I live in the country - farm area and internet is not available.  Jack Kennedy Hodgkin    

    Jack
    This is not Adobe. We own no stock in the company and am not affiliated with it in any way. This is user to user. And, contact information should not be included in your thread to avoid nuisances from spammers and the like. We are glad for the opportunity to be of assistance, but the help comes from within the Adobe Premiere Elements Forum structure.
    1. What version of Premiere Elements do you have and on what computer operating system is it running?
    Each of the versions comes with many disc menu themes. So, I would ask "Do you have the full amount for your version? Or, are you just not satisfied with the many choices that come built into the version that you have?
    2. The most obvious Adobe disc menu that comes to mind related to your stated interests is Aquarium which has been included with recent versions. Have you seen and or used that one.
    Main Menu
    Scene Menu
    You can customize backgrounds and text within the disc menu customization section of the program.
    For deeper customization, then you probably will have to edit the main menu .psd and the scene menu .psd, using Photoshop CS or higher.
    If you get lucky, you may find a version of Photoshop Elements on some version of Windows that will open the Layer Sets of the .psd files so that you can get at the files you seek to edit.
    I have done a lot of work in the area of disc menus for Premiere Elements. Some of the work can be found
    http://www.atr935.blogspot.com/2014/03/pe11-full-background-faux-widescreen.html
    http://www.atr935.blogspot.com/2014/02/pe-adding-movie-thumbnails-to-disc-main.html
    http://www.atr935.blogspot.com/2013/05/pe-one-page-14-scene-buttons-dvd-menu.html
    http://www.atr935.blogspot.com/2013/11/pe11-and-12-christmas-disc-main-menu.html
    Please review. We will be watching for fine tuning of your details in the thread.
    Thanks you.
    ATR

  • Help needed to downgrade firmware for E72

    Unfortunately, I didn't read through this thread before installing firmware V 051.018 on my E72-2, and now I'm stuck with no vibration nor tone when a new SMS message is received: 
    /t5/Software-Updates/Nokia-E72-firmware-v051-018-released/td-p/749976/highlight/false
    Does anybody know anything about how to downgrade the firmware back to what it was?
    I tried googling it but didn't find anything useful.
    Thanks!

    With firmware upgrade you tend to lose settings.. so pl. check your profile customization / personalization menu to confirm whether the settings are as required.. or do you mean there are no options to set !!!!
    The firmware downgrade is not possible at user end..(as mentioned by phonehacker..).. but may be (repeat.. MAY BE) possible at Nokia Care  if you realy need that..
    --------------------------------------------------​--------------------------------------------------------​--------------------------------------------------​--If you find this helpful, pl. hit the White Star in Green Box...

Maybe you are looking for