Need driver for dell powervault 120t for Sun Enterprise 220R

Can someone point me to where I can get the driver for
the DELL PowerVault 120T DLT 7000 for a sun enterprise
200R running Solaris 8 (SunOS 5.8).
Richard Trevino
[email protected]

changed the disk

Similar Messages

  • Sun Enterprise 220R to Dell Poweredge 2161 DS-2 KVM

    Hi there,
    I have a some Sun Enterprise 220R servers with graphics card and one 8 miniDIN female socket for Keyboard/mouse - I would like to connect this machine to a Dell Poweredge 2161 DS-2 KVM for remote control.
    The solution I have come up with is as follows - If anyone has used this solution or similiar, can you let me know if it worked or not please?
    Sun 8 miniDIN Female socket -> USB-SUN-R -> SIP (USB & VGA to RJ45) -> RJ45 Cable to KVM
    VGA Connector -> -> SIP (USB & VGA to RJ45) -> RJ45 Cable to KVM
    NOTE: the SIP cable in the above layout is the one cable - Its just easier to lay it out as above - same for the RJ45 cable
    I would be only using one USB connection on the output of the USB-SUN-R device
    Any suggestion greatly received - Maybe there is something easier than i have envisaged
    Thanks
    Willy
    USB-SUN-R = http://www.networktechinc.com/pdf/man038.pdf
    SIP cable: = http://www.impactcomputers.com/hg526.html

    Hi there,
    I have a some Sun Enterprise 220R servers with graphics card and one 8 miniDIN female socket for Keyboard/mouse - I would like to connect this machine to a Dell Poweredge 2161 DS-2 KVM for remote control.
    The solution I have come up with is as follows - If anyone has used this solution or similiar, can you let me know if it worked or not please?
    Sun 8 miniDIN Female socket -> USB-SUN-R -> SIP (USB & VGA to RJ45) -> RJ45 Cable to KVM
    VGA Connector -> -> SIP (USB & VGA to RJ45) -> RJ45 Cable to KVM
    NOTE: the SIP cable in the above layout is the one cable - Its just easier to lay it out as above - same for the RJ45 cable
    I would be only using one USB connection on the output of the USB-SUN-R device
    Any suggestion greatly received - Maybe there is something easier than i have envisaged
    Thanks
    Willy
    USB-SUN-R = http://www.networktechinc.com/pdf/man038.pdf
    SIP cable: = http://www.impactcomputers.com/hg526.html

  • I need driver sound card dv4 1402tu for windows xp (help me!!)

      I need driver model dv4 1402tu for windows xp - Sound card,  wireless network, etc... Thanks!!

    Please read the sticky post here
    Cheryl and I are working hard to make that post, please learn it and post if you still have difficulties.
    Pavilion DV2922TX, XP-SP3 32bit, Intel T5750 2.0Ghz, Nvidia Geforce 8400M GS with 128MB, 4GB 667 DDR2, 250GB HDD

  • Can't get terminal on Sun Enterprise 220R

    Hi folks, wondering if you can help me.
    I recently acquired an Enterprise 220R on the 2nd hand market. I am assured (reliably) that it was working fine before it was disconnected from its previous home, where it was accessed via a console server.
    I, however, cannot get a terminal on it. I have tried using 9600-8-n-1 ANSI with no flow control in HyperTerminal COM17, as well as several other combinations, and nothing. Cable setup is as follows:
    XP Laptop - USB 232 adaptor - 232-RJ45 adaptor - standard ethernet cable - DB25-RJ45 adaptor - Terminal A on the 220R.
    I am able successfully raise a terminal on my Sun Fire V100 immediately using the same adaptor and same HyperTerm settings, in the following cable config:
    XP Laptop - USB 232 adaptor - 232-RJ45 adaptor - standard ethernet cable - A LOM on V100.
    That tells me:
    - that I am using the correct COM port
    - that the USB-serial adaptor is working
    - that the serial-RJ45 adaptor is working
    - that hyperterm is configured correctly
    SO: I have tried both straight through and crossover cables on the E220R with no success. I have tried different baud rates, different terminal settings, nothing. both ethernet cables have been tested with a cable tester.
    The system is keyed to the power on/off position. Both PSUs are connected and there is no maintenance light.
    What am I doing wrong? I assume it's something to do with either Hyperterm settings or my ethernet cable/connector pinouts? I can crimp cables in any configuration if I know what that configuration is. The DB25-RJ45 adaptor came with the box on Serial A so I assume it's the correct one.
    Please help as this box needs to be used in production ASAP.
    Many thanks
    Cheers James
    Edited by: jradvan on Sep 21, 2008 12:54 AM

    jradvan wrote:
    Hi folks, wondering if you can help me.
    I recently acquired an Enterprise 220R on the 2nd hand market. I am assured (reliably) that it was working fine before it was disconnected from its previous home, where it was accessed via a console server.
    I, however, cannot get a terminal on it. I have tried using 9600-8-n-1 ANSI with no flow control in HyperTerminal COM17, as well as several other combinations, and nothing. Cable setup is as follows:
    XP Laptop - USB 232 adaptor - 232-RJ45 adaptor - standard ethernet cable - DB25-RJ45 adaptor - Terminal A on the 220R.Unfortunately, there is no such thing as a "standard" 232<->RJ45 adapter. So the exact wiring of the two adapters you are relevant. This sequence can create either a "straight through", or a "null modem", or something completely different.
    You must have a "null modem" setup for this to work, because both the XP and the Sun have DTE wired serial ports.
    I am able successfully raise a terminal on my Sun Fire V100 immediately using the same adaptor and same HyperTerm settings, in the following cable config:
    XP Laptop - USB 232 adaptor - 232-RJ45 adaptor - standard ethernet cable - A LOM on V100.
    That tells me:
    - that I am using the correct COM port
    - that the USB-serial adaptor is working
    - that the serial-RJ45 adaptor is working
    - that hyperterm is configured correctly
    SO: I have tried both straight through and crossover cables on the E220R with no success. I have tried different baud rates, different terminal settings, nothing. both ethernet cables have been tested with a cable tester."crossover cable"? Like an ethernet crossover cable? That's not useful for serial hookups. A serial "rollover" cable could be useful in some cases, but an ethernet crossover cable won't work well.
    What am I doing wrong? I assume it's something to do with either Hyperterm settings or my ethernet cable/connector pinouts? I can crimp cables in any configuration if I know what that configuration is. The DB25-RJ45 adaptor came with the box on Serial A so I assume it's the correct one.I aggree. I think it's the final adapter. You can view the serial connections on this page. If you know the pinouts of that final adapter, you can construct the correct cable:
    http://www.sunhelp.org/unix-serial-port-resources/serial-pinouts/
    Darren

  • Need driver to HP Scanjet 5400C for mac 10.4

    hello,
    I need this driver, which was available there before:
    http://discussions.apple.com/thread.jspa?threadID=1259740
    but now the link doesn't work anymore.
    Can anybody sent it back to me? Thanks a lot for advance !!

    The HP web site has support pages and a general search with the word
    Mac in there plus your product name & number should generate results.
    Here's a result from such a search of: HP Scanjet 5400C drivers...
    http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=2 8462&lang=en&cc=us&taskId=135&prodSeriesId=28455&prodTypeId=15179
    HP had a rather large combination download which covered many of their
    products a year or so ago; that was an update and replaced original media
    CDs that were included with some of their items. Not sure if scanners were
    included in that (and it was huge.) Somewhere, I have that download .dmg.
    Good luck & happy computing!

  • Failed to save deployment descriptor - cause: com.sun.enterprise.deploymen

    I have a CMP EJB that will not deploy. I've been able to compile, run the capture-schema, complete the EJBC, but then I get a failure with the message below. I have used the ASMT to migrate from Weblogic 6.1 to Sun One 7. Any help would be userful.
    ERROR:
    Deployment Error -- Error while running ejbc -- Fatal Error from EJB Compiler -- -- Failed to save deployment descriptor for: Tracker-EJB cause: com.sun.enterprise.deployment.EjbExternalDescriptor
    The exception in the admin log file really doesn't help me.
    Thanks in advance.

    Please check the xml files by running verifier. It seems like there is some problem with the sun-ejb-jar file. Check the packaging of the EJB. Set the log level to fine or above and give the log to know more details about the error.

  • Need printer driver for dell v313 compatable with iMac

    Need Printer driver for Dell V313 compatable with IMac

    you nee to search for the printer and the Mac OS X version - iMac does not run on iOS 8.1.1
    Mac OS X versions (builds) for computers - Apple Support

  • Bluetooth Driver for dell(Inspiron N5110(ST: 3v82np1 ) is still not working well.

    Hi,
    I have tried installing "Dell Wireless 1701
    802.11 b/g/n, Bluetooth v3.0+HS Driver "
    But I saw neither wireless nor Bluetooth was defined.
    As  the drivers listed below are only  the driver for wireless and bluetooth, I almost tried all of them, except the last three.
    File TitleImportanceRelease DateVersionActions
    Intel Centrino Wireless-N 1030 WiFi Driver 
    (Driver) 
    Other Formats
    Description
    Intel 6230/N1030/N1000 WiFi Driver for win7 64-bit This package provides the driver for the Intel Centrino Wireless-N 1030 WiFi Driver and imore…
    Intel Centrino Wireless-N 1030/Advanced-N 6230
    Bluetooth Adapter Driver 
    (Driver)
    Description
    This package provides the Intel Centrino Wireless-N 1030/Advanced-N 6230 Bluetooth Adapter Driver and is supported on Inspiron N5110 and Vosmore…
    Dell Wireless 1701 802.11 b/g/n, Bluetooth v3.0+HS
    Driver 
    (Driver)
    Description
    This package provides the Dell Wireless 1701 802.11 b/g/n, Bluetooth v3.0+HS Driver and is supported on Inspiron N5110 and Vostro Notebook 3more…
    Dell Wireless 1702 WiFi + Bluetooth Driver 
    (Driver)
    s
    Description
    This package provides the Dell Wireless 1702 802.11 b/g/n, Bluetooth 3.0+HS Driver and is supported on Inspiron and Vostro Notebook models tmore…
    Intel Centrino Wireless-N 1000, Centrino Advanced-N
    6230, Centrino Wireless-N 1030, v.14.2.0.10, A01 
    (Driver)
    Recommended
    Description
    This package provides the Intel Centrino Wireless-N 1000/1030, Advanced-N 6230 Driver and is supported on Inspiron N5110 and Vostro Notebook more…
    Intel Centrino Advanced-N 6230/Wireless-N 1030
    Bluetooth Adapter Driver 
    (Driver)
    Description
    This package provides the Intel Centrino Advanced-N 6230/Wireless-N 1030 Bluetooth Adapter Driver and is supported on Inspiron N5110 and Vosmore…
    Add to My Download List
    Dell Wireless WLAN 1502 Half Mini-Card Driver 
    (Driver)
    Description
    This package provides the driver for Dell Wireless WLAN 1502 Half Mini-Card and is supported on Inspiron Notebook and Vostro Notebook modelmore
    Intel WiMax Link 6150 Driver 
    (Driver)
    Description
    This package provides the Intel WiMax Link 6150 Driver and is supported on Inspirion and XPS Notebook models that are running the following
    Realtek RTL8111E-VB Gigabit and RTL8105E-VB 10/100
    Ethernet Controller Driver 
    (Driver)
    Description
    This package provides the Realtek RTL8111E-VB Gigabit and RTL8105E-VB 10/100 Ethernet Controller Driver and is supported on Inspiron N5110 amore…
    I had to install Dell Wireless 1702 WiFi +
    Bluetooth Driver
    The wireless adapter was defined by this driver, however, the Bluetooth still has an exclamation mark in front of it, and when the Dell WLAN and Bluetooth client installation finished, a pop up message said that Windows couldn't install the device
    well, although there was a folder added in documents folder named 'Bluetooth Folder'
    Yes, the Bluetooth was named with 'Generic Bluetooth adapter' before installing 'Driver above'. However, after installing the driver above, the Bluetooth adapter named with ' Dell wireless 1702 Bluetooth v3.0". But as you see it's
    still not working will.
    The sceen shot shows the device manger before installing  Dell
    Wireless 1702 WiFi + Bluetooth Driver
    These screen shots shows the device manger after installing  Dell
    Wireless 1702 WiFi + Bluetooth Driver
    I've lit windows detect the operating program for this device on the internet, it said "Windows has detected that the operating  program of this device is up to date. As this screenshot shows.
    What should I do because nothing lift to try? If you have a look at the ninth drivers in my previous message, you will see that no other drivers for Bluetooth lift.
    Also, I have tried  to install Intel
    Centrino Wireless-N 1030 WiFi Driver 
    But I have been told that "the installation is blocked', This package of installation cannot be installed on your system' I don't know what this
    means, is it because Dell Wireless 1702 WiFi +
    Bluetooth Driver is being installed
    Could you please take some of your preciout time out to read carefully my points below to finish this problem?
    first:
    Yes, if you had a look at my first post, you would have seen that I really have downloaded and installed the drivers suitable for bluetooth, which was only Dell
    Wireless 1702 WiFi + Bluetooth Driver, which made the bluetooth recognized by Windows 7(64Bit). However, the bluetooth in the device manager still has an exclamation mark as it is shown in the device manager.
    I don't have any other drviers which can do more than the what Dell
    Wireless 1702 WiFi + Bluetooth Driver did because I have tried all the drivers listed under 'Network', exept the what are for Etherent.
    Yes, when I have tried adding the bluetooth between two laptops(Mohammad and Nasreen).  the bluetooth was added for both laptops as you see in these screenshots below:
    The Bluetooth devices of Nasreen's laptop whose bluetooth is having some problems in Device mangage.
    The Bluetooth devices of Mohammad's laptop  whosse Bluetooh is defined well in device manager.
    But there is still problem in the device managre as shown in the screenshot listed before.
    Second: (Important) That when I want to send files or recieving between two bluetooth added in either laptop, I could send them. Also, when I open the Mohammad's bluetooth added in Nansreen's laptop( screenshot
    below), I can show what is inside it.
     However, when I open the the Nasreen's bluetooth addd in Mohammad's laptop, I noticed  no reponse at all because as you see that disconnected is written in fornt "Nasreen-Pc" as this screenshot: 
    Although sometimes Nasreen-Pc gets connected as screenshot below, but I am still not able to open the Bluetooth folder of Nasreen-pc from Mohammad-pc. When trying to do that, no response is there.
    In other times, Nasreen-pc gets connected for a while, but it comes back disconnected.
    Third:: I noticed that the name of Laptop whose Bluetooth was added listed in 'My computer' for the laptop whose Bluetooth is having some problems in the device manager.(First Screen shot below)  However,
    the name of the laptop whose Bluetooth is having problems wasn't listed on other laptop's "my computer"(Second Screen shot below)
    Finally: : when I clicked "right-click" on "Nasreen-PC" and then clicking on "detecting and troublshooting issues", I found that windows informed me that :
    But which driver should I reinstall because I have already installed the Dell
    Wireless 1702 WiFi + Bluetooth Driver almost twice?
    A man should convert his anger and sadness into strength to continue living in this life.

    Certain driver packages contain drivers from some of the essential services only and for additional services, separate drivers must be installed. Additionally, the service is installed only if a compatible device is installed (or paired).
    Therefore, you are seeing the error.
    If you are using the Bluetooth L2CAP Interface and Bluetooth Remote Control services and not able to install the services, you can try unpairing the device, restart the PC, pair the device and then check. If that too fails, you need to install a suitable
    driver, sometimes even other OEM drivers solve the issue. You can Bing/Google about this. You can also contact Dell Support for more information.
    Balaji Kundalam
    Thanks a lot,
    I really didn't understand what you mean with in your first part the service is installed only if a compatible device is installed (or paired).
    The Bluetooth is integrated with
    the laptop, then  where other services will come from, all service are related to Bluetooth.
    If there are some additional services not related to Bluetooth,
    then how can I either let them functioning well or disable them in order to get rid of the yellow exclamation mark
    on the name of my laptop in the Device and printers.
    Also, I really have installed a
    BCBT7(Broadcom Bluetooth) for HP which really defined the same Bluetooth issue,
    Device manager after installing the entire setup of driver BCBT7(Broadcom Bluetooth) on HP laptop
    but  when trying to install the same
     BCBT7(Broadcom Bluetooth)  on Dell,  I faced the error below, although there is an icon for Bluetooth in
    the system tray. Also, the Bluetooth is integrated as
    you have seen in the device manager. 
    You didn't answer me: Third:: I noticed that the name of Laptop whose Bluetooth was added listed in 'My computer' for the laptop whose
    Bluetooth is having some problems in the device manager.(First Screen shot below)  However, the name of the laptop whose Bluetooth is having problems wasn't listed on other laptop's "my computer"(Second Screen shot below)
    A man should convert his anger and sadness into strength to continue living in this life.

  • Need advice on graffics card upgrade for use of CS6 Mercury Playback in PR & AE w/ dell xps 9100

    I am curretly running CS6 on my dell xps 9100
    Windows 7 64bit
    12GB Ram
    2TB HD + 0 Rate 2TB External Drive (x2)
    Intel Core i7 930 operating at 2.8 gigahertz with an 8-megabyte cache.
      Memory and Storage  
    The Studio XPS 9100 can be equipped with up to 24 gigabytes of RAM. It uses Tri-Channel DDR3 SDRAM operating at 1333 megahertz. The computer has six DIMMs into which RAM can be plugged. The Studio XPS 9100 may have a hard disk size of up to 2000 gigabytes using SATA drives operating at 7200 rpm.
    Video
    ATI Radeon HD5870 with 1024 megabytes of RAM
      Expansion and Networking  
    The Studio XPS 9100 has one PCI slot, three PCIe x1 slots, one PCIe x8 slot and one PCIe X16 slot. It has four USB 2.0 ports, a 15-in-1 card reader, a headphone port and a microphone port on the front panel. The rear ports into an IEEE 1394a port, surround-sound audio ports, four USB 2.0 ports, one eSATA port, an S/PDIF port and HDMI ports. It has integrated 10/100/1000 Gigabit LAN through the RJ45 port on the back with optional internal Wireless-N. PCI card slot (PCI_1) 26
    PCI Express x1 card slot (PCIE1X3)
    PCI Express x16 card slot (PCIE16_1)
    PCI Express x1 card slot (PCIE1X2)
    PCI Express x1 card slot (PCIE1X1)
    PCI Express x8 card slot (PCIE8_2)
      Chassis and Power  
    The Studio XPS 9100 is 19.4 inches high by 7.8 inches wide by 20.7 inches deep. It weighs about 40 pounds. A 525-watt power supply powers the computer.
    I use Audition, Premiere Pro and After Effects (Dynamic Link) to edit concerts filmed on 4 HD Camera's (m2ts x3 and mp4) I also take and mix 6-8 tracks from soundboard and mix in audition. I find my system is struggling to keep up when I have done some color correction and then try to cut in multi-cam mode. My graphics card does not support CUDA and as stated above my system only has a 525w power supply. So a GeForce GTX 470, 570, 580 would not be compatable. I do not GAME but I work with large HD files (4 angles, 1-2 hours each, audio & effects).
    My trouble is I don't know which one of the graffics cards that support Mercury play back, would be the best for my needs without having to upgrade my power source (if possable). I'm thinking a mid level card and another 8-12 ram upgrade would be more suited (and cheaper) to my needs, unless I'm going to need a power upgrade anyway. If someone could please let me know what card would help me with my worload of these that would be great! I guess what Im saying is can someone tell me which of these is compatable with my system and is it worth it for the change in performance I will see?
    GeForce GTX 285 (Windows and Mac OS)
    GeForce GTX 470 (Windows)
    GeForce GTX 570 (Windows)
    GeForce GTX 580 (Windows)
    NVIDIA® Tesla C2075 card (Windows) when paired with a Quadro card as part of an NVIDIA Maximus™ configuration
    Quadro FX 3700M (Windows)
    Quadro FX 3800 (Windows)
    Quadro FX 3800M (Windows)
    Quadro FX 4800 (Windows and Mac OS)
    Quadro FX 5800 (Windows)
    Quadro 2000 (Windows)
    Quadro 2000D (Windows)
    Quadro 2000M (Windows)
    Quadro 3000M (Windows)
    Quadro 4000 (Windows and Mac OS)
    Quadro 4000M (Windows)
    Quadro 5000 (Windows)
    Quadro 5000M (Windows)
    Quadro 5010M (Windows)
    Quadro 6000 (Windows)
    Quadro CX (Windows)
    Tesla C2075** (Windows)

    Right now I can get a 570 for 175 bucks... R4yMoNd. When I look at the 570 in comparison  to what I have it doesnt look as though itis going to make too much difference. http://www.hwcompare.com/9048/geforce-gtx-570-vs-radeon-hd-5870/ I'm sure however the CUDA cores will speed it right up. I'm no good when it comes to all that so thanks to both you for the help. I have tracked down a 670 in stock (seems tough) for $440 then I need a 700 w power supply for about 70. If the 570 should take care of the problems listed above thats what I'm going for.. Just wasnt sure if it would make the needed difference

  • SB Live 5.1 for Dell Vista driver questi

    I've been reading this board and though many Sound Blaster issues are covered on it I don't think the specific issues I am having were discussed. Pardon me if they were. I have a Dell Dimension 4600 with the SB Li've 5. card for Dell. After updating my computer with a clean install of Vista Home Premium Vista did not recognize my card as a Soundblaster but as a "mulitmedia device". For a day or so I had no sound until suddenly Windows Update provided a driver for the Soundblaster 5., installed it and I had sound again. OK, not as good as before (no mixers, etc) but stereo sound and both my speakers and my subwoofer were functioning properly. Then, for reasons I won't get into here, I had to completely reinstall Vista again, once again a clean install. This time, after several days of no sound, Windows update did not provide any drivers. So I installed the original drivers provided by Dell and it installed the SB card and it worked, at least until I started getting BSODs and I was forced to uninstall it. Once again back to a "multimedia device" in Device Manager I tried every which way of getting MS to install its driver again with no luck. So this afternoon I installed drivers for xp and an update patch, both downloaded here from Creative and once again the SB works, though I have disabled it to avoid more blue screens. My questions:? Can I remove the drivers without removing the Sound Blaster card as a device in Device Manager so that Vista's Windows Update?will see it as a Sound Blaster card without a driver and provide the drivers as it did during the first installation? After I installed the Creative drivers I tried, though Device Manager, updating the drivers by having Windows Update search for them and the response I got from Windows Update was that I "have the latest drivers", clearly wrong. OK, Creative is not supporting the SB Li've 5. in Vista and I cannot use the Kx drivers because they do not support the Dell OEM Sound Blaster. Fooling Windows update seems to be the only way I can get around buying a new sound card at this point. Anyone have any suggestions?

    Kx help files say the Sound Blaster OEM for Dell is not supported and I already tried it. I think I may have stumbled on something because the card now seems to be operating properly and though Device Manager lists the Creative driver for the card if you look inside at the Drii'ver Details, among the Creative files listed are two files by Microsoft, dmk.sys and portcls.sys that are clearly marked "vista_rtm", so somehow I may have gotten a mix of Creative and MS drivers since I have the very limited "mixer" that comes with the Vista SB driver. I am no techie, not by a long shot, but as long as the card works and I get no blue screens and no reports back from Security Manager complaining about a conflict I am going to leave everything just as it is. I don't play games and just need a sound card that works. It actually sounds pretty good now. I wish there was a mixer and bass/treble control but I can li've without it, especially since drivers really aren't finished for Vista. Thanks for your suggestions.

  • Just got Prosoft drive genius 3 software, and it's telling me that the external hard drive that i am using for my time machine back up drive needs to be defragmented.  is it wise to do this or should i not??

    just got Prosoft drive genius 3 software, and it's telling me that the external hard drive that i am using for my time machine back up drive needs to be defragmented.  is it wise to do this or should i not??

    Let's hope a couple things: that you have bootable clones of your drives also; that the backup drive for TimeMachine has over 3x capacity of the data you plan and are storing. I would also switch TM backup drives so you have a 2nd.
    Fragmented free space affecting performance happens when the drive is too full which may mean there isn't enough free space for a full backup set.
    1.5TB for backing up 500GB, while WD Green 3TB is $140 and WD Black 1.5TB is, about the same price.
    I'd be worried about the integrity and directory, and whether you can afford to lose that drive. Defragging is also a very slow operation. the ideal: to just clone a drive, or start over with another drive and wait. cloning TM volumes has not been done or has it? SuperDuper hoped to but I don't think they or Bombich's CCC made it there.
    Trouble with highly fragged is when free space gets to 20% normally, 1/3 or so though for TM volumes, and finding where and a chunk of space for the file being written. Does TM use large spare image files of like 2GB?
    Best would be to ask in the TimeMachine section Snow Leopard
    https://discussions.apple.com/community/mac_os/mac_os_x_v10.6_snow_leopard?view= discussions#/?tagSet=1009
    where there are some good FAQ and tutorials, and people that know the ins-and-outs and shortcomings.

  • Do I need to keep my external hard drive connected at all times for time capsule?

    Do I need to keep my external hard drive connected at all times for time capsule?

    Hi,
    I have a similar question. I have backed up my external hard drive through my computer, onto my TC. When I go into TM, it doesn't show the external hard drive unless it is connected to the computer. Can I access the info from the external hard drive that is on the TC if I don't have the hard drive plugged in? If so, how can I do that?
    Thanks,
    Bernadette

  • I need driver for ati switchable graphics 4250/6370 on windows 8

    The video driver in HP is only for windows 7, and in the Ati webpage is only for one graphics card and not for switchable mode  under windows 8, please i need drivers for the hp dv7 4267cl model.
    i have three notebook of this model for software developers, i need update. any suggestion?
    Graphics card: ATI 4250 / 6370 switchable
    Notebook model: DV7 4267cl

    Hello HK_Ariel,
    Thank you for posting on the HP Forums!
    I understand you are looking for a WIndows 8 ATI driver for your computer. This driver does not exist, as you indicated. You would need to return the computer to Windows 7 to use the switchable graphics.
    Mario
    I worked on behalf of HP.

  • Need driver for canon mg 5250 as scanner is not working with version 10.7. Can you please help me to find the driver so scanner works with WIFI?

    need driver for canon mg 5250 as scanner is not working with version 10.7. Lion. Can you please help me to find the driver so scanner works with WIFI?

    Try with the latest Apple driver package for Canon (released 15th Feb):
    http://support.apple.com/kb/DL899
    This solved my problem with the printing.

  • Is there any way to create a time machine backup to an external hard drive with content already on it?  I have a hard drive that i have used for pictures but when i try to run a backup it says i need to start from a blank drive. Can i get around it?

    Is there any way to create a time machine backup to an external hard drive with content already on it?  I have a hard drive that i have used for pictures but when i try to run a backup it says i need to start from a blank drive. Can i get around it?

    It would be much better if you had separate drives for the pictures and Time Machine backups.....but, if you want to use the same drive for both purposes, temporarily move the folder with the pictures to another location for safe storage.
    Run the Time Machine backup on the hard drive and verify that everything is working correctly. Time Machine will format the disk for you in Mac OS Extended (Journaled) as part of the backup process.
    Then move the folder with the pictures back to the hard drive with the Time Machine backups.
    When you have tested to make sure that everything is working again, then and only then should you delete the folder with pictures from the temporary storage area.
    Again....it would be much better to keep Time Machine backups on a drive just for that purpose, and other data on another drive for that purpose. This is clearly one of those times when the fact that you can do something does not mean to imply that you should do it.

Maybe you are looking for