Need driver for Lambda power supply
Hi,
I need driver for Lambda Zup60-7 power supply,I could not find in instrument drivers,
it is through RS-232 communication,
Is it available ? If available please send it,otherwise try to send related VI's
Thank you.
Check if anything here helps. Otherwise, try Tools>Instrumentation>Create Instrument Driver Project. A power supply driver is pretty simple to write.
Similar Messages
-
Sample programmes in C# for setting voltage in a TDK lambda power supply
please provide some guidance for setting the voltage of a TDK lambda power supply through GPIB. Any driver software needto be installed?
If you use an NI GPIB controller, then you will need to install NI-488 and it is recommended to install and use NI-VISA. There will be coding examples installed with the drivers. You don't mention the model number but you might find an existing instrument driver from NI or the vendor.
-
Hi!
I am looking for a power supply for my sound blaster speakers.
The model is SBS 380. The power supply works on a 4.0 volt.
Anyone who would have a spare one to sell or to inform me where
to buy one would be most appreciated. ( I'm in Canada )
I have be been to several stores but no ones carries 4 volts power supply.
The one I have is no lomger functional and the sound is excellent from those speakers.
BTW, Craetive no longer support them and have none in stock.
Thanks,
GerryJason, I think he would have some trouble getting them shipped to Australia from one of those stores. Beside that it would be less from newegg, look at the additional 20% off promo and free shipping. For me it's 3 days from order to delivery from ZZf and newegg.
Yes, one of the Corsairs but not HX but as mentioned TX or VX, also PC P&C 610. Ignore watts, go by +12V amps and as FP mentioned consider future need for more power when choosing. Nowdays the VX450W (+12V~33A) would be considered minimum to get and also would be considered weak for many current systems. -
Lambda power supply+labview+current control
Hi there,
I want to control the output current from TDK lambda power supply based on input from a pressure sensor. Based on available drivers from Lambda site, I was only able to output certain current and voltage value. But don't know how to control it depending on other input like pressure reading.
Is there any way to do this in labview?
Thanks in advance.
Arihant.Unfortunately I don't have drivers for either of 'Pfeiffer vacuum gauge controller' and 'TDK lambda power supply'...!!
But went through your code, and it looks like you're reading from both the instruments... but you should be reading only from 'Pfeiffer vacuum gauge controller' and should be writing (current or voltage or both values) to 'TDK lambda power supply'...!!
Now before you write the new (current or voltage or both) value(s)... you can place a simple algorithm that will calculate new value (based on reading from 'Pfeiffer vacuum gauge controller')....!!
I am not allergic to Kudos, in fact I love Kudos.
Make your LabVIEW experience more CONVENIENT. -
need driver for canon mg 5250 as scanner is not working with version 10.7. Lion. Can you please help me to find the driver so scanner works with WIFI?
Try with the latest Apple driver package for Canon (released 15th Feb):
http://support.apple.com/kb/DL899
This solved my problem with the printing. -
I have a macbook air (mid 2012) and a thunderbolt display (27'').
Do I absolutely need to connect the power supply together with the thunderbolt cable ?
I found that the screen won't wake up if only the thunderbolt connection is plugged. Is this normal ?I just got my ATD and late 2011 MBP up and running. I've not tried running without the power adapter from the ATD plugged in, but I just tried and didn't have any problems with the display not waking. You may want to take your query to the ATD forum - https://discussions.apple.com/community/peripherals/thunderbolt_display - perhaps someone there has experienced a similar issue.
Good luck,
Clinton -
Need driver for OS 10.9 for Samsung clp-365w Printer
Trying to conect may Samsaung CLP-363W printer to me Mac Book Pro Running Maverick.
Please help
Need driver for OS 10.9 for Samsung clp-365w PrinterTry entering the model here > http://www.samsung.com/us/support/downloads
If you can't locate a v10.9 Mavericks compatible driver, try resetting the pring function.
Open System Preferences > Printers & Scanners > Print
Hold down the Option key while clicking the "-" (Remove printer) button.
If no printers are currently added, hold down the Control key while clicking in the box that appears above the "+" (
Add printer) button, then choose Reset printing system… from the contextual menu. -
Need driver for Webcam Windows7 Ultimate 64 bit
Need driver for webcam
Hi:
If you have already installed the graphics driver, you need to install the YouCam software.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-135497-1&cc=us&dlc=en&lc=en... -
Please help me find the driver for the HP LaserJET COLOR PRO 200 FOR MAC OXC 10.10 YOSEMITE
This question was solved.
View Solution.This should be what you need
Driver for for OS X 10.9 Mavericks and OS X 10.10 Yosemite
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=lj-125410-4&cc=us&dlc=en&lc=en...
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer -
Need driver for HP Photosmart 309G - only see one for 309a
Need driver for HP Photosmart 309G - only see one for 309a - that one does not print correctly after install Please help! Running Windows 7 home premium 64 bit
Hi,
The following link is for Windows 7 (only few weeks old):
http://ftp.hp.com/pub/softlib/software12/COL29699/mp-73652-4/PS_AIO_06_C309g-m_USW_Full_Win_WW_140_1...
Release details
Released: 2014-08-21
File name: PS_AIO_06_C309g-m_USW_Full_Win_WW_140_175-4.exe [1/1, 157.0M]
Version 14.1.0
Compatibility:
Microsoft Windows Vista
Microsoft Windows Vista Home Basic (32-bit)
Microsoft Windows Vista Home Premium (32-bit)
Microsoft Windows Vista Business (32-bit)
Microsoft Windows Vista Ultimate (32-bit)
Microsoft Windows 7 (32-bit)
Microsoft Windows 7 Home Basic (32-bit)
Microsoft Windows 7 Home Premium (32-bit)
Microsoft Windows 7 Professional (32-bit)
Microsoft Windows 7 Enterprise (32-bit)
Microsoft Windows 7 Ultimate (32-bit)
Microsoft Windows 7 Home Basic (64-bit)
Microsoft Windows 7 Home Premium (64-bit)
Microsoft Windows 7 Professional (64-bit)
Microsoft Windows 7 Enterprise (64-bit)
Microsoft Windows 7 Ultimate (64-bit)
Microsoft Windows 7 (64-bit)
Microsoft Windows Vista (64-bit)
Microsoft Windows XP Professional
Microsoft Windows Vista Enterprise (32-bit)
Microsoft Windows Vista Enterprise (64-bit)
Microsoft Windows XP Home Edition
Microsoft Windows XP Media Center
Microsoft Windows Vista Home Basic (64-bit)
Microsoft Windows Vista Home Premium (64-bit)
Microsoft Windows Vista Business (64-bit)
Microsoft Windows Vista Ultimate (64-bit)
Microsoft Windows XP
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. -
I need driver for the HDR-SR5 for windows 7
I need driver for the HDR-SR5 for windows 7
I used the Vista driver on Win 7 preinstalled notebook and it did work.
I have no idea what A200 notebook model you have but in my case the driver was called:
Flash Media Driver 2.0.0.6
This is a driver for your Bridge Media Slot. This slot lets you insert either a SD card, Memory Stick (Pro) or xD picture card. -
I need help finding a power supply
I need to find a power supply that is compatible with my Compaq Presario SR5816F
It needs to have a minimum output of 12v @ 18 amps and have at leaast 350 wattts...
thanks.
This question was solved.
View Solution.See my reply to your later thread:
http://h30434.www3.hp.com/t5/Desktop-Hardware/Will-this-power-supply-work-with-my-PC/m-p/4292292#M85...
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee. -
I need driver for Pavilion 15 n204tx win7 64bit
Hi,
I need driver for HP Pavilion 15 n204tx Notebook PC with NVIDIA GEFORCE graphic card win7 64bit.
3D Video Controller
PC\VEN_10DE&DEV_1292&SUBSYS_2166103C&REV_A1
PC\VEN_10DE&DEV_1292&SUBSYS_2166103C
PC\VEN_10DE&DEV_1292&CC_030200
PC\VEN_10DE&DEV_1292&CC_0302
Ethernet Controller
PC\VEN_10EC&DEV_8136&SUBSYS_2166103C&REV_08
PC\VEN_10EC&DEV_8136&SUBSYS_2166103C
PC\VEN_10EC&DEV_8136&CC_020000
PC\VEN_10EC&DEV_8136&CC_0200
PCI Device
PC\VEN_10EC&DEV_5227&SUBSYS_2166103C&REV_01
PC\VEN_10EC&DEV_5227&SUBSYS_2166103C
PC\VEN_10EC&DEV_5227&CC_FF0000
PC\VEN_10EC&DEV_5227&CC_FF00
PCI Simple communications Controller
PC\VEN_8086&DEV_9C3A&SUBSYS_2166103C&REV_04
PC\VEN_8086&DEV_9C3A&SUBSYS_2166103C
PC\VEN_8086&DEV_9C3A&CC_078000
PC\VEN_8086&DEV_9C3A&CC_0780
SM Bus Controller
PC\VEN_8086&DEV_9C22&SUBSYS_2166103C&REV_04
PC\VEN_8086&DEV_9C3A&SUBSYS_2166103C
PC\VEN_8086&DEV_9C3A&CC_0C0500
PC\VEN_8086&DEV_9C3A&CC_0C05
Universal Serial Bus (USB) Controller
PC\VEN_8086&DEV_9C31&SUBSYS_2166103C&REV_04
PC\VEN_8086&DEV_9C22&SUBSYS_2166103C
PC\VEN_8086&DEV_9C22&CC_0C0330
PC\VEN_8086&DEV_9C22&CC_0C03
Unknown device
ACP\HPQ6007
*HPQ6007
NVIDIA GEFORCE graphic card
Regards,
SachinHi,
Your machine only supports Windows 8. BUT please try for W7:
HP 3D DriveGuard Software (ACP\HPQ6007):
http://ftp.hp.com/pub/softpaq/sp61001-61500/sp61291.exe
Ethernet Controller (PC\VEN_10EC&DEV_8136&SUBSYS_2166103C&REV_08)
http://ftp.hp.com/pub/softpaq/sp44501-45000/sp44990.exe
PCI Device card reader (PC\VEN_10EC&DEV_5227&SUBSYS_2166103C&REV_01):
http://ftp.hp.com/pub/softpaq/sp52001-52500/sp52186.exe
PCI Simple communications Controller (PC\VEN_8086&DEV_9C3A&SUBSYS_2166103C&REV_04):
http://ftp.hp.com/pub/softpaq/sp46501-47000/sp46507.exe
SM Bus Controller (PC\VEN_8086&DEV_9C22&SUBSYS_2166103C&REV_04)
http://ftp.hp.com/pub/softpaq/sp52501-53000/sp52791.exe
Universal Serial Bus (USB) Controller (PC\VEN_8086&DEV_9C31&SUBSYS_2166103C&REV_04)
Intel USB 3.0 Driver for Intel 8 and U/Y Series Products
3D: You need to install Nvidia driner to fix this. You can get autodetect:
http://www.nvidia.com/Download/Scan.aspx?lang=en
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. -
Need driver for headphone bluetooth
I have bluetooth headphones Andoer Ma-826-2.
Where can I find the drive for these headphones. pc Toshiba Qosmio G50-12Q asks me to install the drive but that 'the producer has planned.
In fact in the manual for the connection does not speak of installation of the drive.
While the PC asks them to me. In support of the drive for toshiba there are bluetooth headsets in general that apply to the majority of headphones ?
Tank youToshiba doesn't support third part software so if you need driver for certain device you must visit manufacturers support page.
All what you get from Toshiba is BT driver for your notebook. -
Need driver for hp laser jet 4 plus with windows 7
need driver for hp laser jet 4 plus with windows 7
Hi,
A friend of mine uses USB-Parallel cable, he was saying it's ok
Good luck,
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
Maybe you are looking for
-
The full message said: There was a problem downloading the software for the iPhone "Judy's iPhone 4". The network connection was reset. Make sure your network settings are correct and your network connection is active, or try again later. I am trying
-
Anonymous User forms in Sharepoint 2013 Online
I'm using Sharepoint 2013 online with Office 365. Is there any way for an anonymous user to communicate with the site using forms (preferably Infopath)? There are many, many versions of this question on the web. Several lead to http://claytoncobb.wor
-
Hi everyone, Thanks for taking the time to read though my dilemma. I am using CS3 on a mac osx leopard machine. I am trying to print to a Glunz and Jensen stingray printer. One for printing film. My problem is that when I send a file to print from in
-
How to run Reports Saved in JSP format
How to run the report develop by report9i on OC4j that directory structure where to save jsp report file and how do it get access to rep tag lib that is in web-inf /lib. second thing what does it exactly mean by report server name.. is it the name of
-
When i use Excel and add a comment to a cell "Document not saved" some times comes up. To get past this i have to delete the coment and re do it, it then some times saves. I dont know what I am doing wrong and what I am doing right because it does so