Need driver only file
2 printers P2035N and P1606dn, both on a wired network--looking for driver inf only file for Win7 64 bit (as opposed to the installation software that requires the printer to be connected). Available anywhere? I do not see this on the driver page.
Hi,
Below you may find the basic software for the printers:
P2035N:
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=18...
P1606dn:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=bi-83409-3&cc=us&dlc=en&lc=en&...
Follow the installation and only the basic drivers will be installed with no additional software.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution
Similar Messages
-
Need driver (*.inf) files for HP OfficeJet 5610 All-in-one
I am setting up a print server and it needs *.inf driver files for my HP OfficeJet 5610 All-in-one printer. Where can i find them? I've installed the drivers on my PC, but they come as *.exe files that will not extract to give the *.inf files. Can anyone help?
Hello, First I would like to say that I dont like what HP does, I dont want all your software cloging up my computer. What I want if for the hardware I have purchased from you to work the way I want to. Nothing more nothing less. Please give your customers the chance to pick the software they want and not fill up the pc with trash.
PlanoStar You will find the x86 inf file in the Windows XP Package, it about an 68mb download, just extract EP-CDB-enu_NB.exe using Winrar.
And ofcourse after the hours spent, with HP trolling you, you would think you are done. Think again. Microsoft will pick up the tradition with some Install x86 Medea ntprint.inf BS. to solve this problem download the files needed from here.
It will save you hours instead of mounting AIO images and whatever.
Ps. I have just registered with HP with the sole reason of making this post, and I would just like to say that hp support is rubbish. -
I recently had a kernel panic in which I think my hard drive only had so much space left after I ran a bunch of drivers I thought I needed. I uninstalled all and moved files. For some odd reason I'm not getting sound of of my hdtv/monitor.HELP? I uninstalled all the drives and apps I download. I moived files either to trash if not needed, and others to other external drives. I went into disk utility and did a repair disk permission and verify disk. Clean out junk files. Now my hdtv/monitor does not give me any sound, nor does my mac mini. Can someone please tell me what to do?
What drivers?
-
Only two hard drives - optimal file locations?
Hi,
Can anyone tell what would be the optimal file location configuration (regarding perfomance) when there are only two physical hard drives available? One is abviously running the OS (Windows XP), but how to locate raw images, ACR cache and catalog-files for optimal performance (and are there any other file locations to consider from LR point of view)? The search did not provide answer to this question, and with google everything pretty much boils down to having (at least) three physical hard drives or RAID-array, which are not an option for me.
The workstation can have only two internal drives but allows dedicated controllers for both of them, and I would prefer not to have external drive (only USB2 and FW400 connectors available). Memory is already maxed for the current mother board, and disk activity seems to be next place to optimize. The current performance is "ok", but it would not hurt to squeeze a bit more.
Running Windows XP and LR 2.3.
Thanks in advance.Thank you for your advice. It has been quite a pain to find out credible setup hints for simple two drive setup.
This slightly differs from original topic, but...
Have there been more inprovements within 2.4 code than have been mentioned in release notes (e.g. http://thelightroomlab.com/2009/06/lightroom-24-and-adobe-camera-raw-54-available/)? I have currently no need for additional camera support, and the bugs mentiones as "fixed" have not been a problem for me. I have had some cases with inconsistent plug-in behaviour (and few crashes) with export plug-ins, but I have judged those as problems either with SDK or plug-in itself. -
I need appleisightinstaller.exe to install the isight driver for Windows Vista running in Parallel Desktop 6 for Mac, but I don't have a Leopard DVD. What came with my Macbook Air was a flash stick "MacBook Air Software Reinstall Drive" only.
All,
A very interesting NOTE to this thread. In order to try and get the "ignore permissions" box to show up in GET INFO (so I could execute Matt the Magician's solution to file sharing issues)-- I ran the terminal command for disabling ACLs on my internal HD / start up disk (as indicated in the linked thread to BDAqua's forum).
Although I understand that this was useless for disabling permissions on the start up disk (as everyone here pointed out) and allowing me to see the "ignore permissions" check box - somehow it did seem to fix my file sharing problem...and that was the root problem I wanted solved in the first place! After doing the terminal command and a quick reboot, I went in and tested file sharing on the chosen directory and I can create new files or work from existing files in the directory, with both users being able to modify / and save from both machines and each machine sees the revisions and can build from them. Bottom line - I'm stoked and want to thank everyone for their help.
The only other tweak I made was going over to my wife's machine and instead of using her log in / password, I just used my name and password to connect to my main machine that was sharing directories. Maybe that's what fixed the problem or the ACL disable but either way...I'm up and running the way I want to be.
Hope this thread helps anyone else who has these file sharing / permissions issues with Leopard. Especially for anyone wanting to do such a simple file sharing set up between 2 computers. I wish I understood exactly which tweak fixed the problem, but at least it works the way I want now.
So happy to be done w/this one!
Thx everyone. Any additional input on what solved it is welcome, so my curiosity is quelled...
TC -
Need to extract only file name from path.........
Hi All,
I have a parameter.This calls the function
"CALL FUNCTION 'F4_FILENAME' to get the file from C drive.
After selecting the file the path is displayed in the Parameter field.
My problem is I need to extract only file name from the path.Please advice.
Example : Prameter id C:\folder\file.xls
I shd extract only file.xls from the path.Please advice.Hi,
Use the below logic:
data: begin of itab,
val type char20,
end of itab.
SPLIT l_f_path AT '\' INTO TABLE itab.
The last record of the internal table holds the file name.
describe table itab lines l_f_lines.
read itab index l_f_lines.
l_f_filaname = itab-val.
Hope this helps u. -
Need driver for HP Photosmart 309G - only see one for 309a
Need driver for HP Photosmart 309G - only see one for 309a - that one does not print correctly after install Please help! Running Windows 7 home premium 64 bit
Hi,
The following link is for Windows 7 (only few weeks old):
http://ftp.hp.com/pub/softlib/software12/COL29699/mp-73652-4/PS_AIO_06_C309g-m_USW_Full_Win_WW_140_1...
Release details
Released: 2014-08-21
File name: PS_AIO_06_C309g-m_USW_Full_Win_WW_140_175-4.exe [1/1, 157.0M]
Version 14.1.0
Compatibility:
Microsoft Windows Vista
Microsoft Windows Vista Home Basic (32-bit)
Microsoft Windows Vista Home Premium (32-bit)
Microsoft Windows Vista Business (32-bit)
Microsoft Windows Vista Ultimate (32-bit)
Microsoft Windows 7 (32-bit)
Microsoft Windows 7 Home Basic (32-bit)
Microsoft Windows 7 Home Premium (32-bit)
Microsoft Windows 7 Professional (32-bit)
Microsoft Windows 7 Enterprise (32-bit)
Microsoft Windows 7 Ultimate (32-bit)
Microsoft Windows 7 Home Basic (64-bit)
Microsoft Windows 7 Home Premium (64-bit)
Microsoft Windows 7 Professional (64-bit)
Microsoft Windows 7 Enterprise (64-bit)
Microsoft Windows 7 Ultimate (64-bit)
Microsoft Windows 7 (64-bit)
Microsoft Windows Vista (64-bit)
Microsoft Windows XP Professional
Microsoft Windows Vista Enterprise (32-bit)
Microsoft Windows Vista Enterprise (64-bit)
Microsoft Windows XP Home Edition
Microsoft Windows XP Media Center
Microsoft Windows Vista Home Basic (64-bit)
Microsoft Windows Vista Home Premium (64-bit)
Microsoft Windows Vista Business (64-bit)
Microsoft Windows Vista Ultimate (64-bit)
Microsoft Windows XP
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. -
I need to transfer files applications etc from a Mac Book Pro to a Mac Book, but I want certain files/applicaitons to be available only to certain users. DO I transfer everything first then move it into different accounts or can I set up the different user accounts first & select what goes where when I migrate?
ThxDo you have a backup that you can restore from? Your old hard drive seems to be the problem.
-
I am running out of memory on my hard drive and need to delete files. How can I see all the files/applications on my hard drive so I can see what is taking up a lot of room?
Thanks!
DavidEither of these should help.
http://grandperspectiv.sourceforge.net/
http://www.whatsizemac.com/
Or search 'disk size' in the App Store.
Be carefull with what you delete & have a backup BEFORE you start, you may also want to reboot to try to free any memory that may have been written to disk. -
What is the exact name of the cable I need to connect my old hard drive from my macbook pro, which has been removed from the computer, to my new macbook pro? I need to transfere files from the old hard drive to the new computer.
No eSATA to USB. Just a SATA/IDE to USB adapter. Google SATA/IDE to USB adapter and you will get tons of links to buy them. Most likely your local computer electronics store has them, although they might be more expensive buying locally than online.
I have several. You can get either USB 2, which what I recommend, or USB 3. USB is backward compatible so a USB 3 adapter will work on a USB 2 port and a USB 2 adapter will work on a USB 3 port. Backward compatible in both directions.
I suggest a USB 2 type because there have been some problems with certain USB 3 devices, the USB 3 interface used isn't all that good in those certain devices. USB 3 is still fairly new where as USB 2 has been around for over 10 years.
synghem wrote:
Thank you LowLuster,
At the apple store they said I needed an esata to usb wire. But looking at wires on line has been confusing. Is sata the same as esata? How do I know if I need a usb 3 or usb 2? -
I am setting up a new iMac and need help syncing files to Dropbox. On my old computer I had it set where when I saved a document, it was saved on my hard drive, as well as to a folder in Dropbox. I can't remember how I set this up. Any help?
The way that Dropbox works is that it keeps a copy of all your files in your local Dropbox folder on your hard drive (which is, by default, directly under your home folder). Adding files to that folder will sync them to the Dropbox server.
You do of course have to download the Dropbox application to enable this (download link at the top right of http://dropbox.com ).
Matt -
Backing up ONLY files from your hard drive
So recently installed Yosemite and it caused even more problems I had on this MBP. I now get the grey screens of death during start ups many times before it will actually boot up completely. So I went to back it up and it wouldn't work and I read online that formatting your back up and re-backing up solved the problem and it did. But now I wanna downgrade back to mavericks so I created mavericks boot install and it formatted my HDD and then used my boot OS X Mavericks drive and I was now back in mavericks. And the mavericks new owner intro thing popped up and made me set up my computer info and aske if id like to restore data and i selected yes and selected my external back up drive and it said I could not do it because that drive only had a Yosemite back on it (Because I deleted my mavericks back up earlier) so I went into recovery mode to restore my files I selected my external back up HD and it worked this way but when it finished restoring it restored all my files but it restored It to Yosemite because that was my last back up. So is there any way to back up my files without backing up the OS as well. Would I just have to select every file individually?
Boot into the recovery partition.
Select Disk Utility from the 4 option menu.
Drag the indented VOLUMES to the Source and Destination fields.
Ciao. -
Does driver jar file needs to be extracted before giving java command?
I wrote a JDBC program, where it will pull the data from Sybase and Push into Oracle. That program is working fine in Eclipse IDE. But when i tried to make it make it work from the command program, by giving javac and java commands..., it didnt work.
Finally i realised that, it is working when i extract the driver jar files (sybase and Oracle, ojdbc.jar and jconn3.jar ) using jar xvf utility.
Do we need to do that? or is there any smart way that we can just mention the drivers path and make it work?
For your information, i set the CLASSPATH and JDBC_HOME to the driver location.
Please help me out
Thank You
ViswaHi Balu,
Could you please check this?
umi-c005-m3:~/TestRem2CCM/SampleProgram 179> ls -l
total 928
-rwxrwxrwx 1 500 500 465869 Sep 30 2005 jconn3.jar
drwxrwxrwx 2 500 500 4096 Jun 5 11:45 psae
umi-c005-m3:~/TestRem2CCM/SampleProgram 180> ls -l psae/
total 96
-rwxrwxrwx 1 ramavi11 500 3251 Jun 5 11:27 DataModel.class
-rwxrwxrwx 1 500 500 3564 Jun 5 11:26 DataModel.java~
-rwxrwxrwx 1 500 500 3564 Jun 5 11:27 DataModel.java
-rwxrwxrwx 1 ramavi11 500 8358 Jun 5 11:27 DataTransfer.class
-rw-rw-rw- 1 500 500 11126 Jun 5 11:25 DataTransfer.java~
-rwxrwxrwx 1 500 500 11127 Jun 5 11:45 DataTransfer.java
umi-c005-m3:~/TestRem2CCM/SampleProgram 181> java -cp . psae/DataTransfer
Before Try
Inside Try
*********Sybase Connection Failed*************
java.lang.ClassNotFoundException: com.sybase.jdbc3.jdbc.SybDriver
at java.net.URLClassLoader$1.run(URLClassLoader.java:200)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:268)
at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:319)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:164)
at psae.DataTransfer.getSybaseDataList(DataTransfer.java:191)
at psae.DataTransfer.main(DataTransfer.java:19)
Data NOT available from MMS query
umi-c005-m3:~/TestRem2CCM/SampleProgram 182> java -cp . psae.DataTransfer
Before Try
Inside Try
*********Sybase Connection Failed*************
java.lang.ClassNotFoundException: com.sybase.jdbc3.jdbc.SybDriver
at java.net.URLClassLoader$1.run(URLClassLoader.java:200)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:268)
at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:319)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:164)
at psae.DataTransfer.getSybaseDataList(DataTransfer.java:191)
at psae.DataTransfer.main(DataTransfer.java:19)
Data NOT available from MMS query
umi-c005-m3:~/TestRem2CCM/SampleProgram 183> -
An error occured while trying to copy the needed DB driver jar files
When I try to run my web app, I see this error in the Output window.
Creator will also put up a window essentially saying that I don't have a particular
data source. But I do have that very data source there.
The error seems to be pointing to this line in my build-impl.xml file
<nbdeploy debugmode="false" clientUrlPart="${client.urlPart}" forceRedeploy="${forceRedeploy}"/>I'm using postgresql-8.1-404.jdbc3.jar
I started this project with Creator2, so I don't know if the nbproject files
are out of date or anything.
Here's the output text:
init:
deps-module-jar:
deps-ear-jar:
deps-jar:
Copying 1 file to /home/tc/dev/oms/src
library-inclusion-in-archive:
library-inclusion-in-manifest:
Copying 1 file to /home/tc/dev/oms/build/web/WEB-INF/classes
load-project-properties:
installGraphics:
installLayouts:
compile:
compile-jsps:
pluto-hack-web-xml-run:
portlet-container-deploy:
jsCreatorDist:
run-deploy:
An error occured while trying to copy the needed DB driver jar files.
Deployment error: An error occured while trying to copy the needed DB driver jar files.. See the server log file for details.
Exception=Deployment error: An error occured while trying to copy the needed DB driver jar files.. See the server log file for details.
Deployment error: An error occured while trying to copy the needed DB driver jar files.. See the server log file for details.
at org.netbeans.modules.j2ee.deployment.devmodules.api.Deployment.deploy(Deployment.java:198)
at org.netbeans.modules.j2ee.ant.Deploy.execute(Deploy.java:75)
at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:275)
at org.apache.tools.ant.Task.perform(Task.java:364)
at org.apache.tools.ant.Target.execute(Target.java:341)
at org.apache.tools.ant.Target.performTasks(Target.java:369)
at org.apache.tools.ant.Project.executeTarget(Project.java:1214)
at org.apache.tools.ant.Project.executeTargets(Project.java:1062)
at org.apache.tools.ant.module.bridge.impl.BridgeImpl.run(BridgeImpl.java:234)
at org.apache.tools.ant.module.run.TargetExecutor.run(TargetExecutor.java:242)
at org.netbeans.core.execution.RunClassThread.run(RunClassThread.java:125)
Caused by: An error occured while trying to copy the needed DB driver jar files.
at org.netbeans.modules.j2ee.deployment.devmodules.api.Deployment.deploy(Deployment.java:139)
... 10 more
/home/tc/dev/oms/nbproject/build-impl.xml:799: Deployment error: An error occured while trying to copy the needed DB driver jar files.. See the server log file for details.
BUILD FAILED (total time: 7 minutes 21 seconds) -
HT201250 Can I do a backup using Time Machine on a server, or it needs an external drive only?
Can I do a backup using Time Machine on a server, or it needs an external drive only?
Time Machine can back up to a server. The drive or partition used still needs to be formatted Mac OS Extended (Journaled).
(65169)
Maybe you are looking for
-
I've wondered this for a long time-is there a way to set up Lync so that I can have users sign in with just the sign in address, and not have to specify the username as well? Things tend to go like this: User launches lync client-types sign in addres
-
How do I install Win 8 on Satellite C850 following HDD failure?
I have a PC repair business, and a customer has brought me a Satellite C850-1KN laptop which has had a catastrophic hard drive failure (just clicking sound coming from the drive.) I replaced the hard drive and tried booting from a Windows 8 DVD, by c
-
I have flashing light on the apple tv, i need to connect to itunes for maintenance, can I do it wirelessly?
-
M2A_DBLINK and A2M_DBLINK in oracle apps ASCP
what is the use of the M2A_DBLINK and A2M_DBLINK. why do we use it ? how do we set up these db links and on which instance. and how do you see the data flow from ASCP2OLTP during data pull from ERP and data load to ASCP instance. Thanks & regards, Kr
-
Trace PO number from TP material doc number of sub contractor
Hi, How to trace PO number from transfer posting material document number of subcontractor? Regards Kantha