Need drivers for Labveiw 8.6 for compumotor 6k8 controllor
I need a compumotor 6k8 driver for labveiw 8.6. The parker Hannifin website offers a Labview driver, but it dates to Labview 5.1. There are instructions on the National Instruments website for converting the driver to the form required for LV 6.1, but it requires both those programs. in addition I still am using Labveiw 8.6. I am new to using labveiw and have a limited background with c++/java programming in college.
Hi Orhan,
Is the driver a library of VIs or a dll? You can use the call library funciton node if it is a dll. Have you contacted Parker Hannifin to see if they can make it into a dll or convert it to a more current version of LabVIEW?
Here is the DeveloperZone with the table of LabVIEW version conversions.
Kristen H.
Message Edited by Kristen H. on 11-19-2009 11:17 AM
Similar Messages
-
I need drivers (not upgrades) and apps for Audigy 2 Plati
I have: Fresh install, WinXP SP2, SOYO Mobo (P4X400), Creative Soundblaster Audigy 2 Platinum (driver: 5.2..443)
After installing the drivers from Creatives Website I thought I'd start installing the ap
ps.
However I have not been able to install any of them, no matter the sequence. I receive a "setup did not detect the required components." I have sound, I see the device and drivers in Device Manager.
Please tell me how to get around this "loud" stop error so I may complete the re-installation of my Audigy 2 Platinum card.) make sure your sound card is snugly in the PCI slot and didn't pop out
2) using the dxdiag utility (Start>Run>dxdiag), use the DirectSound test to test if the sound you're getting is from a software buffer. If it is, you may need to physically reinstall your sound card.
3) make sure that the apps are for your sound card. MediaSource updates sometimes refuse to install if you do not use Creative's update detection utility to find the correct one for your card. -
new imac running lion 10.7.2 partitioned HD for duel boot and successfully installed windows xp pro (sp2)....have internet through eithernet cable on the mac side but no internet connection on the windows side....need drivers???? please help
I too am running xp spiii on my mac with lion. However I installed xp while running snow leopard then upgraded to lion and both are running fine. If you have the support disc that came with the imac all the relevant drivers are on there. The only other thing i would suggest is that you get spiii and upgrade to that.
Hope that helps -
RE: I need drivers for an external isight camera on windows 7 64-bit
IRT http://discussions.info.apple.com/message.jspa?messageID=11515278#11515278
Are the drivers from boot camp only for the internal isight camera or should the drivers work with the external firewire camera?
I installed the drivers without a problem on Windows 7 64-bit. However, windows 7 didn't recognize the drivers (either automatically or when manually found). The installer placed them in C:\Windows\System32\DriverStore\FileRepository\
Of note, the camera does work. Using skype, the camera's LED lit up. However, the generic driver wouldn't allow the camera to "talk" with windows. The aperture opened to the max setting and "whited out" the video. Thanks!!witkewoo wrote:
IRT http://discussions.info.apple.com/message.jspa?messageID=11515278#11515278
Are the drivers from boot camp only for the internal isight camera or should the drivers work with the external firewire camera?
I installed the drivers without a problem on Windows 7 64-bit. However, windows 7 didn't recognize the drivers (either automatically or when manually found). The installer placed them in C:\Windows\System32\DriverStore\FileRepository\
Of note, the camera does work. Using skype, the camera's LED lit up. However, the generic driver wouldn't allow the camera to "talk" with windows. The aperture opened to the max setting and "whited out" the video. Thanks!!
(1) External iSight is, as you recognize, a Firewire webcam. It has its own built-in microphone.
Built-in iSight is a USB camera. It has no mic of its own.
Windows® video drivers for both iSights are included. However, as explained in the following link, there are no Windows® audio drivers for external (Firewire) iSight’s internal microphones:
http://en.wikipedia.org/wiki/ISight#iSightonWindows
(2) If you can track your problems to your Boot Camp or Windows installation, see FAQs and troubleshooting here:
http://www.apple.com/support/bootcamp/
As reported by user mikkel_nielsen here:
http://discussions.apple.com/message.jspa?messageID=11953256#11953256
you may merely need to update and reinstall the drivers.
I do not use Windows®, but if you get no better help here, the best I have to offer is:
Check iSight with OS X apps and user accounts: http://support.apple.com/kb/HT2090
If all works there, consider Boot Camp/Win7 FAQ & links: http://support.apple.com/kb/HT3986
Also Boot Camp 3.0, Mac OS X 10.6 FAQ & links: http://support.apple.com/kb/HT3777
If all else fails, this search in Boot Camp might give you some ideas or an idea for a new topic there:
http://tinyurl.com/39lu9fn
Message was edited by: EZ Jim
Mac Pro Quad Core (Early 2009) 2.93Ghz w/Mac OS X (10.6.4) MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.4)
LED Cinema Display G4 PowerBook 1.67GHz (10.4.11) iBookSE 366MHz (10.3.9) External iSight -
i have a 2006 mackbook pro running windows 7 32 bit i need drivers for the sound and the earliest bootcamp on here is 4.03 my machine says its not for this system please help which version of boot camp can i use
Read this. You need to be running Snow Leopard or later.
http://support.apple.com/kb/ht3986 -
Hi,
I have an equium M50-216 PSM57E that im trying to repair for a friend, he did a clean boot of XP but didn't back up the drivers, and now im trying to find the network controller driver, as well as two video adapter one of which is (VGA) to get things up and running again.
Anyone know where I can find these drivers? As its driving me crazy trying to find them!
Thanks in advance
Ben> have downloaded all drivers off the Toshiba website for said laptop, and still i have the 4 drivers not installed.
You dont say what drivers you need so I can only say that the Toshiba European driver page provides a Installation Instructions txt file.
There you can find all drivers which must be installed.
Check the whole list and you will find out what drivers are missing or haven't been installed -
Need drivers for Photosmart D7560, and Scanjet 4370 for both Windows 7 32 bit and 64 bit
I need drivers for my Photosmart D7560 Printer and Scanjet 4370 scanner, for both Windows 7 32 bit, and 64 bit.
Hi, For the printer: http://ftp.hp.com/pub/softlib/software11/COL30216/mp-75048-1/PS_SF_04_D7500_NonNet_Full_Win_WW_130_140.exe For the scaner (no available): http://h20564.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=457534&swLangOid=8&swEnvOid=4063 Regards.
-
Plz provide needed drivers for windows 7 64 bit
hello sir/madam I want all drivers for my laptop I downgraded from windows 8.1 to 7 ultimate my product id: J6M42PA and model number: 15-p077tx plz provide all needed drivers for fresh windows 7 ultimate 64bit
Hi:
The drivers will work on all P0xx models.
I have already given you the procedure to install the graphics drivers.
That procedure will also install the 3D video controller and smbus controller.
Ethernet Controller:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-137996-1&cc=us&dlc=en&lc=en...
Network Controller:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-137998-1&cc=us&dlc=en&lc=en...
BCM43142A0:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-137999-1&cc=us&dlc=en&lc=en...
PCI Simple Communications Controller:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-131838-1&cc=us&dlc=en&lc=en...
Universal Sirial Bus (USB) Controller:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-138111-1&cc=us&dlc=en&lc=en...
1st Unknown:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-137939-1&cc=us&dlc=en&lc=en...
2nd Unknown:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-141423-1&cc=us&dlc=en&lc=en... -
Need drivers for Windows XP on my Satellite A200
I need some help finding all the drivers needed for my A200 laptop. I was not really happy with Vista so I plugged in my old XP disc and installed it instead.
Now, my computer can't find any of the needed drivers.
I would really appreciate it if someone could help me!Hi,
where did you look for some drivers? I can suggest you the following links:
http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp
Toshiba - Download drivers:
In case of no success, try it here:
http://209.167.114.38/support/Download/ln_byModel.asp
Toshiba of Canada Limited - Drivers and Downloads
Good luck and give some feedback if you got some success.
Greets -
Satellite A300D-126 - Need drivers for Windows 7
Hello everyone.
We have two problems with two drivers so:
Display driver 8.634.1 - don't work zoom settings. New Catalyst 9.11 does not help me.
Sound Driver 4.98.6.61 - failed instaled.
I installed display driver for Vista and sound for XP but I think I need an update because videocard with this 8.452.2-080130a-059298C driver working so slowly .
What to do ?
Thanks in advanceHi mate,
First of all you cant use Windows XP drivers on Windows 7. This will not work.
You wrote about different drivers for Vista and XP Ok, the most Vista drivers are also work on Windows 7 but Satellite A300D is Windows 7 supported. That means you can already get Windows 7 drivers on the Toshiba page:
http://eu.computers.toshiba-europe.com > Support & Downloads > Download Drivers
Check this! -
Need to download drivers for canon MP 280 for macbook pro
I need to download drivers for canon MP 280 for macbook pro how do i go ...
Welcome to Apple Support Communities
As you can see, that printer is compatible > http://support.apple.com/kb/ht3669
To get the drivers for that printer, you just have to add the printer to OS X, following these steps > http://support.apple.com/kb/PH11145 OS X will download automatically the driver for your printer after adding it to the printer list. Or you can download the Canon drivers from the Apple website > http://support.apple.com/kb/DL899
You don't need to get drivers from the Canon website. The Apple drivers are sufficient to make the printer work, although you may find software in the Canon website that you may want -
I need drivers (network, LAN, wireless, video, utilities) for Portege M300
Thanks
SebastianHi,
thanks for your info,I try to
http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=EU&banner_id=HOM E_RSL_DRIVERS
but portege m300 is not in the list
Are you so kind to give me the web adress for Toshiba European driver page
best regards,
Sebastian -
Need Drivers for windows 10 x64
Hello, I need the proper drivers for windows 10 x64 for my probook 450 g1 laptop. I got the drivers from this page: http://us-support.external.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=5405166&swLangOid=8&swEnvOid=4192all the drivers are not present here like display, hot keys etc. So it will be very helpful to me if someone helps me to get those drivers. Thanks in advance.
From Boot Camp: System requirements for Microsoft Windows operating systems - Apple Support please use Boot Camp Support Software 5.1.5640.
You can use Boot Camp: Install or repair Boot Camp drivers for Repair. -
HT1447 i need drivers for ipod classic
I need drivers for ipod classic
Hello bennyfromwi,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
Updating iPod
http://support.apple.com/kb/ht1483
Best of luck,
Mario -
HT3669 i need drivers for HP Color LaserJet CP1215
hi i need drivers for HP Color LaserJet CP1215 pleaze
Hi Bertl1,
Although the HP web site says the CP1215 is not compatible with Macs, there is an open source free driver available. It is a 3-part download/install. Get ghostscript, foomatic, and foo2hp:
http://www.linuxfoundation.org/collaborate/workgroups/openprinting/macosx/foomat ic
http://foo2hp.rkkda.com/
Maybe you are looking for
-
Delivey for Multiple Sales orders
Hi, I am new to SD and would like to know how do we create a single delivery corresponding to multiple sales orders. Can someone please advice me about the same? Thanks and Regards, Aditya
-
Saving app data on mobile devices?
Hey, I want to make a save file for the game I'm making for iOS and Android, but I'm not sure how to go about doing it. Should I make a text file? Where do I store it/read it from? Where does it go? Any help would be greatly appreciated. -Thanks in a
-
Link from another server on welcome screen of EBP , open in new window?
Hi All, I have added a link that is from outside the SRM server to role in pfcg and have done corresponding changes in ITS template to show the link on SRM portal main screen. When the link in left hand side pannel is clicked , it opens in a new wind
-
How do i select russian keyboard in firefox os 1.3 (zte open c)
how do i select russian keyboard in firefox os 1.3 (zte open c)? i have no russian keyboard in list of 'built-in keyboards' and in list of 'more keyboards'.
-
how can i backup music and apps which were not stored on my computer in order to upgrade my iphone?