Need drivers for palm m500 series for Vista 32 bit

Where can we find driver downloads for my husbands palm m500 series for 32 bit Vista??
Thank you!!
Don
Post relates to: Palm m500

Try reading through this thread in the Windows Hotsync section of the Forum:
http://forums.palm.com/palm/board/message?board.id=windows_hotsync&thread.id=38625&jump=true
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Similar Messages

Cannot Run, Uninstall or Reinstall Palm Desktop for Palm M500 on Windows XP

I have a Palm M500 and Windows XP Home Edition with service pack 3 installed. Palm deskop was working smoothly, but now every time I try to run Palm Desktop I get the following error message: "Windows Installer: the feature you are trying to use is on a network resource that is unavailable. Click OK to try again, or enter an alternate path to a folder containing the installation package 'Palm Desktop.msi' in the box below." The box below says "C:\DOCUME~1\user\LOCALS~1\is33\1".I tried to uninstall Palm and I get the same message and Palm does not uninstall. I downloaded from Palm Support downloads the PalmDesktopWin414EN update and tried to install it and I get the same error message so I cannot install it. Please Help !!!
Post relates to: Palm m500
Post relates to: Palm m500

Hello DiegoK and welcome to the forums......
I would try going into safe mode and following the instructions below.
You should first make a copy of your data to have just in case something
happens. You can find your data files by going to C:\Program Files\Palm or
Palm One. Highlight your Palm Desktop username and right click and copy.
Then go to your PC desktop, right click on a blank spot and select paste.
Now you want to uninstall Palm Desktop and remove everything that has to do
with Palm Desktop from your computer. Like the above folder, delete the Palm folder. Once this is done,
you will need to delete some registry keysfrom your PC Operating System registry.
Word of warning, going here and deleting the wrong thing can cause your PC
to not start up, crashing and deletion of programs and data. If you feel
you are unsure of yourself, see if you have a friend that can help you or a
PC technician that you can pay to help you. This will show them everything
they need to delete. To retain your current Registry settings, we need to do a backup of the Registry.
On the PC, go to start and run type "regedit" without quotes
Highlight MY COMPUTER, go to File --> export. Should pop up with a Save As
box. Current location is fine should be in My Documents or you can change to a location you will remember.
In the file name box, type "Regbackup[todaysdate]" i.e. Regbackup07072008. Next, the hard part.
The easiest way to make sure your working with the correct key, highlight the key i.e. palm quick install,
and press delete on your keyboard. It will ask you, are you sure. Say yes. Do the same thing for all keys below.
If you make a mistake, stop what you are doing. And call a PC technician.
BUT do not turn off your computer.
The reg keys are as follows (Note: some of theses reg keys will not be here
but if they are delete them)
* HKEY_CURRENT_USER\Software\U.S. Robotics\Palm Quick Install
* HKEY_CURRENT_USER\Software\U.S. Robotics\PalmOne File Transfer
* HKEY_CURRENT_USER\Software\U.S. Robotics\Pilot Desktop
* HKEY_CURRENT_USER\Software\Palm
* HKEY_CURRENT_USER\Software\Palm, Inc.
* HKEY_CURRENT_USER\Software\PalmDesktopAutorun
* HKEY_CURRENT_USER\Software\palmOne
* HKEY_CURRENT_USER\Software\PalmSource
* HKEY_LOCAL_MACHINE\Software\PalmSource or anything else that says palm
Next reboot your computer
Then reinstall your Palm desktop from the CD and do a hotsync. If it asks
you for a username and you synced your device before, put in 'test" if you
did not sync before you create a hotsync name.

Power cable for Palm m500

A friend gave me her Palm m500. The website shows a different cable than I have- one with a charger on it. I need that.
Is there a place to buy one ? Thanks

Try: www.directfix.com or www.usedpdaparts.com or www.ebay.com
smkranz
I am a volunteer, and not an HP employee.
Palm OS ∙ webOS ∙ Android

"Port In Use" error message when trying to sync Palm m500 to Windows Vista machine

An error message on my Palm displays "Error: Serial Port in Use (Serial 0307)" when I try to sync my Palm m500 to my Windows Vista (32 bit) Home Basic machine. It worked until about 3 months ago and I don't have a restore point that far back to try System Restore. I've upgraded to Palm Desktop 6.2.2 (was using 4.xx) and downloaded the PalmHotSyncSetup from Pimlico Software but nothing helps. Any ideas are appreciated.
Post relates to: Palm m500

I would try connecting the Palm's cradle, with the Palm in it, to your PC and then, in Device Manager, right-clicking on Palm Handheld #2 and selecting Uninstall Driver. Palm Handheld/Palm Handheld #1 could be visible if you connect the Palm to USB port you may have tried using perviously.
After uninstalling Palm Desktop, reboot the PC, make sure Palm Desktop 6.2.2 is installed (since you are using Vista) and then try reconnecting the Palm.
One last thing: Make sure that you are using a 32-bit version of Windows. There is no 64-bit USB driver support from Palm or ACCESS. If you do have a 64-bit version of Windows Vista installed, that would clearly explain why you are having so much trouble getting your m500-series PDA to sync. This thread tells you how to check for a 32 or 64-bit install of Windows.
Alan G

Micro DataPad Mini Keyboard for Palm m105 Series

I have the Micro DataPad Mini Keyboard and I need to install drivers. I can't seem to find anything on the palm website. Can anyone help me please? I know the palm is outdated but I can't afford a new one right now and I need it to help me keep my son's doctor appointments organized.
THANKS in advance for any assistance.
Post relates to: Palm m105
Post relates to: Palm m105

Hi, and welcome to the Palm Community Forums.
That is not a Palm product, so you wouldn't find the drivers here, even if it was not an older device.
Your best bet is to either try to find a disc from a third-party seller (using Google perhaps), or inquire with the developer whom I believe is Micro Innovations.
Good luck.
Post relates to: None
smkranz
I am a volunteer, and not an HP employee.
Palm OS ∙ webOS ∙ Android

AC Adapter for Palm m500 cradle

Wanting to reactivate my older m500, I am confused which of several of my AC chargers is the proper one. Is it the one with an output of 9V AC 1000mA?? Other information on this charger is ENG Direct Plug-in Class 2 transformer, model 41A-9-1000 EIA 172 9330 D, made in China and "Indoor use only".
Not willing to do the "smoke test", your input is very appreciated.
rarsen
Post relates to: Palm m500

The one I'm looking at now (for my M515) is listed at 5.0vdc at 1000mA.
9vac is definitely Wrong!
Most Palms use 5.x volts DC to charge with.
WyreNut
Post relates to: Centro (AT&T)
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

I need drivers (not upgrades) and apps for Audigy 2 Plati

I have: Fresh install, WinXP SP2, SOYO Mobo (P4X400), Creative Soundblaster Audigy 2 Platinum (driver: 5.2..443)
After installing the drivers from Creatives Website I thought I'd start installing the ap
ps.
However I have not been able to install any of them, no matter the sequence. I receive a "setup did not detect the required components." I have sound, I see the device and drivers in Device Manager.
Please tell me how to get around this "loud" stop error so I may complete the re-installation of my Audigy 2 Platinum card.

) make sure your sound card is snugly in the PCI slot and didn't pop out
2) using the dxdiag utility (Start>Run>dxdiag), use the DirectSound test to test if the sound you're getting is from a software buffer. If it is, you may need to physically reinstall your sound card.
3) make sure that the apps are for your sound card. MediaSource updates sometimes refuse to install if you do not use Creative's update detection utility to find the correct one for your card.

Where do I find download only for x-Pro series for Mac?

Hi, I ordered Acrobat X Pro (student edition for mac) but I got the windows version instead. Help?

Get in touch with support. If they sent a Windows version, the serial isn't usable on Mac, anyway.
Mylenium

How to get and install a full feature HP driver for CM1312 MFP series for Mac OS v10.8?

Hi there,
I am running a Mac OS X v10.8 (in Portuguese) and trying to use a HP CM1312 FMP printer, with full features (double-side printing). In the meantime, I have also downloaded the latest driver/firmware from HP but it does not detect the printer. On the other hand, the printer works fine (except for the full feature part)...
In addition, when I go on the system preferences, there is no option for the printer "driver". Just the other 2 ones...
Anyone can help? It would be really good to have the printer fully working with my Mac!
Thanks in advance

Hi and here is the first round of thanks!
So, I have:
Downloaded the Apple driver
Reset the printer on the system preferences > printers & scan / fax
Chosen to install the printer
The system has automatically chosen the "driver" for the printer (HP Laserjet CM1312 MFP)
Have confirmed and installed
Now it shows the possibility of a "manual duplex" (double-sided) and it allows it to be chosen. Though, it doesn't print that way but rather the normal way: 1 side / 1 page... On the other hand, the option "driver" is still not available on the system preferences > print & scan / fax > options & supplies. This probably means that it won't allow a double-sided printing... (just a guess)
Do you have further knowledge?
Thanks

Adobe Acrobat Reader 3.05 for Palm OS

I'm attempting to install Adobe Acrobat Reader 3.05 for Palm OS on Microsoft Vista. I have already installed Palm Desktop for Windows 6.2. However, I consistently receive an error dialog box that says I must install Palm Desktop 4.0 or later; after which the install terminates. I'm using a Palm T|X device. I've updated all other software as is available on the Palm support site. Does anyone have a solution for me. Is there a way to extract the .prc from the Adobe installation file? Do to my running Vista, I cannot install an older version of Palm Desktop. Any ideas?

If anyone ever figures out to maximize the screen on the T/X, please email me. I don't have a lot of time to keep checking back to this forum. I will send a check for $20 to your favorite charity to anyone who figures this out and sends me an email to me at [email protected]
THANKS!!!

Time series for cvc's

hello
In any case ( whether new cvc's added or the new period is to be included ) we create time series for the planning area. Not aware as to why Adjust time series option is given for Planning Object Structure at the time of creation of cvc's.
Any thoughts please
regards
KK

Hi
Yes you are correct we have some background jobs for create time series for the planning area which might execute depending on our frequency. But if you create CVCs and try to check before our program has to be executed in background we might have inconsistency. To avoid this inconsistency it is always advisable to put Adjust Time Series Objects indicator which will immediately Updates the time series objects for new CVC in all planning areas based on this master planning object structure.
SAP always recommends that you update all planning areas immediately due to which we should use this indicator .
Alternatively you can leave these indicator unselected for all new characteristic value combinations. Afterwords to adjust the time series objects at a later date we can choose Adjust Time Series from the context menu for the planning object structure in via S&DP Adminsistration. This also has some of the advantage like that you can create a variant and schedule the job to run later, when there is little system activity.
I hope this helps to answer your question
Thanks
Amol

Palm m500 Hotsync with Windows 7 Home Basic - 32 bit

I have a couple of old, but ever so useful, Palm m500/m505 PDAs, which I could hot-sync with my old PC running on Windows XP. Now I have up-graded to PC with Windows 7 Home Version - 32 bit and am at my wit's end trying to hot sync my PDA data on to my PC Palm Desktop.
I tried hot-syncing by installing Palm Desktop 4.1.4. and Palm 6.2. Have both on my PC. It did do a hot-sync but only to back-up data. I need to view the data on my PC/Monitor.
As I am of the older generation, (a senior citizen), could an expert give me step-by-step simple instructions on how to resolve my problem. My Palm m500 PDA has too many contacts to manually transfer.
Also can I convert PDA contacts to Outlook Address Book and then hot-sync with Palm m500 series PDA ?
Waiting anxiously for help and guidance ..........
Myra

You can give this a try if you havent done it yet...
How to import the Address Book from Palm Desktop to Outlook
You may need to install this too if it is Outlook 2007
Outlook 2007 Update (Windows installer) for Palm OS
For other outlook versions download from this link:
Downloads
There is another post that said you may be able to transfer it using the Infrared feature in the device.
Check POST
Note:
If you have HP Support Assistant installed on the computer(The Blue Question Mark) then open it ==> Complete all pending Updates & Tuneups==> Restart and Check. It may solve your problem
Although I am an HP employee, I am speaking for myself and not for HP.
**Click on “Kudos” Star if you think this reply helped** Or Mark it as "Solved" if issue got fixed.

Sync Palm m500 to Mac OS 10.4.3. Possible?

I've just moved from using Mac OS 10.3.9 to 10.4.3 and I'd like to sync my "old" Palm m500 to it. With the previous OS I had Conduit manager v 3.2 and I could sync with no problems whatsoever. Now I wonder if I can sync Palm m500 with Tiger. I've been checking in Palm and Apple sites but I haven't found any useful information. Reading some of your comments in the forum I realize I might have problems using the new version of isync. On top of that I know my Palm is not precisely the latest model, but it works so well I don't fancy buying a new one. Can somebody help? Thanks.
G5 Mac OS X (10.4.3)

Palm recommends that for the m500 series of handheld organizers, that you install the Palm Desktop 4.2.1 version A, available here:
http://www.palm.com/us/support/macintosh/macdesk421.html
With this handheld, you need not first install software from the CD-ROM that was supplied with your device, as it does not contain unique software for your device.
After installing the Palm Desktop, Apple recommends that you first synchronize with it prior to configuring and using iSync. Once you've done that, launch iSync and select Enable Palm OS Syncing… from the Devices menu, and follow the instructions which appear. At the conclusion of this step, your device will appear in iSync. You can then press the Palm icon in its main window to drop down a configuration pane, which lets you specify how iSync interacts with specific contact groups and calendars.
If you intend to synchronize with other devices, including .Mac, you should also open the Preferences… dialog under the iSync menu, and check or enable all three options under the General tab. Then, each time you synchronize, you should…
• launch iSync
• select Sync Now from beneath the Sync Status icon in your menu bar, and
• press you HotSync button when prompted to do so by the dialog
And, when you've successfully done all this - and find youself unhappy with the manner in which iSync performs - you should consider purchasing and installing the far more flexible, robust, feature-rich and reliable synchronization software from Mark/Space: The Missing Sync for Palm OS. More information about that package is available here:
http://www.markspace.com/missingsync_palmos.php
One caution: The Missing Sync for Palm OS should be installed only after you have successfully synchronized at least once with both the Palm Desktop and with iSync.

Hot sync Palm m500

I have a couple of old, but ever so useful, Palm m500/m505 PDAs, which I could hot-sync with my old PC running on Windows XP. Now I have up-graded to PC with Windows 7 Home Version - 32 bit and am at my wit's end trying to hot sync my PDA data on to my PC Palm Desktop.
As I am of the older generation, (a senior citizen), could an expert give me step-by-step instructions on how to resolve my problem. My Palm m500 PDA has too many contacts to manually transfer.
Also can I convert PDA contacts to Outlook Address Book and then hot-sync with Palm m500 series PDA ?
Waiting anxiously for help and guidance ..........

Hello myrarego,
I see that you are having a problem syncing your Palm device to your PC.
I would suggest posting your problem here at the HP Commercial Forum as well. This forum is specific to Palm products and you may find some more assistance.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Palm maim and windows Vista

I have Palm M500 and window vista 32. I downloaded 6.2 because I lost the software. Will not syronize(sp). Do I need to download a driver.
Post relates to: Palm m500

Your question is frequently asked and answered in the Windows Hotsync board. You need to download PalmHotsyncSetup from www.pimlicosoftware.com
smkranz
I am a volunteer, and not an HP employee.
Palm OS ∙ webOS ∙ Android

Need drivers for palm m500 series for Vista 32 bit

Similar Messages

Maybe you are looking for