Need DVD/ CD-RW Driver for Z60m

Hello,
My laptop has the dvd/ cd-rw but in the system / hardware screen, it show dvd / cd rom. My laptop us to be able to burn pictures, files, etc to blank cd, but not I can not. I try to uninstall the hardware and let the add hardware wizard detect the correct one but it can not. It keep install the HL-DT ST DVDRAM GMA- 4082N.
I 've tried to find the correct drivers for this but unsuccessful.
Please help.
Thank you.

The "driver" for the optical drive is part of the Windows OS. You will not find that on the Lenovo website. If reseating the optical drive doesn't fix your problem, check the device manager to see if the DVD/CD device has a yellow triangle with an exclamation point just to the left of it. If you are seeing this yellow triangle next to your DVD/CD device, you can go to Microsoft's website and run the following "FixIT" utility:
http://support.microsoft.com/kb/314060
You'll be prompted to reboot your unit once you run this utility.
Let me know if this helps you.
Mark
Do NOT PM me with technical issues. Post in the forum for assistance. Thanks

Similar Messages

Need an internal DVD/CD-RW Drive for Sat Pro 4270

I have asked this before but did not state internal drive
I need an Internal DVD/CD-RW Drive for Sat Pro 4270
Can anyone advise a specfic drive that will work

Hi Charles,
Please check out the following URL :- (click on DRIVES for further info.)
http://www.morsenet.com/www/frameset.asp?top=end_user.htm&main=http://www.morsenet.com/www/drilldown.asp?node=464437
regards,

Do i need a external hard drive for my pictures

Do I need an external hard drive for my pictures?

Generally, you should have an external hard drive to backup your system. If your internal hard drive is filling up, you certainly can move pictures to an external hard drive.

In need of a printer driver for an HP Photosmart 2710 on Windows 8.1 RT 32 bit.

In need of a printer driver for an HP Photosmart 2710 on Windows 8.1 RT 32 bit.
This question was solved.
View Solution.

Hi lt12345,
I understand that you are looking to use the Photosmart 2710 with Windows 8.1 RT, but are unable to locate a driver. In my attempt to locate a driver I have come up empty handed. It appears that this printer is not supported for printing from Windows RT.
Sorry to be the bearer of this bad news. Regards,
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Need SPARTAN 3E board Driver for Labview FPGA 8.5 !!!!!! Thx

HI!!I need the spartan 3e driver for labview 8.5(not for labview 8.6) for school useI try to download it from ftp://ftp.ni.com/outgoing/NISPARTAN3ELV85.zip
but this link is dead now. Could somebody send this driver to [email protected] PLZ? Thank you a lot for all in advance
Solved!
Go to Solution.

Hello,
I'm looking for same (Labview FPGA 8.5 for Spartan 3E). But it isn't available on related url now. I'll be glad if someone can help to find driver.
Best regards,

I need a floppy disk drive for old 3 1/2" disks. I have a PowerBook G4 Mac with MacOS X 10.4 operating system. What will work for me?

I need a floppy disk drive for old 3 1/2" disks. I have a PowerBook G4 with Mac OS X 10.4 operating system. What external drive will for for me?

Hi,
Providing that the old 3.5" floppies are 1.44 MB HD disks, you should be able to use a USB floppy drive.
However, if the disks are 2DD/DSDD in the 800K Mac format a USB drive is not going to work. In this case you would need a suitable semi-old Macintosh computer with a built-in floppy drive as an intermediary.
Jan

Need bootable external Firewire drive for iMac G5

I need an external Firewire drive for an iMac G5 PC with OSX leopard that I can format to be BOOTABLE. Don't know where to buy one or even if they're available. I've bought 3 different drives on eBay, thinking each was what I needed, and none were.
I'm frustrated.
Would appreciate. Any helpful info.

I use this one:
http://eshop.macsales.com/item/Other%20World%20Computing/MAU4S7H20T64/
and SuperDuper for creating a bootable clone.
(But there are others too: http://eshop.macsales.com/shop/firewire/1394/USB/EliteAL/eSATA_FW800_FW400_USB )

Help I need to locate a driver for my soundblaster live 24 bit soundcard

My son has been given the following PC games for christmas:-
Command & Conquer 3,
Command & Conquer Red Alert 3,
Arma; Armed Assault,
Medal of Honour: Airborne
The problem he is having installing these 4 games is this. About half way through installation an error message appears that quite simply states "The software you are installing does not bear a WHQL signed driver. This software will not be installed".
The PC we are running is a Dell Dimension 900, that we purchased about 4 years ago, and it was bespoke.
I have run DxDiagnostics and it tells me that the driver for the graphics card is called p7.sys and the sound card are not WHQL logo'd, so how the hell do i download a driver for my soundblaster Li've 24 bit, that does? bear a digital signatre that is WHQL Logo'd. I hope you can help, me please.
Message Edited by simonwicker on 2-26-2008 2:9 PMMessage Edited by simonwicker on 2-26-2008 2:25 [email protected]

Re: Help I need to locate a driver for my soundblaster li've 24 bit soundcard? I guess you and your son are currently using windows xp. Well, what you can do is now is ignoring the WQHL pop-up window and choose the "install anyway" option during the installation of the soundcard driver, since WQHL only means the driver is tested by Microsoft and nothing more; drivers without the WQHL qualification does not mean they are bad drivers, they usually works as good as the WQHL ones.
Ofcourse you can also download the official drivers for the mentioned Soundblaster li've 24bit at Creative Labs support/download site.
here is it:
[url="http://uk.europe.creative.com/support/downloads/download2.asp?MainCategory=&Product=035&dlcentric= 025&Product_Name=Li've%2+24-bit&filetype=&OSName=Windows+XP">Creative Sound Blaster Audigy Value/SE/LS and Sound Blaster Li've! 24-bit XP and Windows Vista Pack .04.0077 (63.39 MB)?[/url]
The driver is for all Soundblaster Audigy Value, SE, LS and Soundblaster Li've 24bit, since they are all based on the CA-006 soundchip (with other words Creative Labs renamed the soundcard several times). Also this driver should be WQHL-ed (if not, choose "install anyway" option during installation of the soundcard driver). Make sure you have uninstalled the older driver before installing the new one. For troubleshooting use utilies like "Driver Cleaner" or "Driver Sweeper" (google for Guru3D and go to the site and their download section to get the utilities/tools) to clean up the junk files of the older driver that are left in the Windows OS.
Good luck and Merry Christmas!!!
Message Edited by CTman on 2-26-2008 0:2 [email protected]

Need to download printer driver for 3510 with windows 10

I need to download printer driver for 3510 with Windows 10

Here is the link to the Deskjet 3510 drivers.
Please mark the post that solves your issue as "Accept as Solution".
If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
I am not a HP employee.

I need a Wi-FI driver for Equium A100-027

I own a Toshiba Equium A100-027 with the Atheros AR5006EG Wi-Fi Adapter.The Laptop is running on Windows XP and I need some software to use the wireless adapter. Could someone help me somehow?
The Driver had a Genuiune Windows Vista but it was working slow and I've changed the OS to XP.

All you need is the right driver for WLAN card. Some special software is not necessary because you can configure WLAN using Windows WLAN settings.

Need CD-RW/DVD-ROM combo drive for Tecra 8200

I have just bought an old Tecra 8200 with a CD-Rom drive in its SelectBay.
I would like to change to a CD-RW/DVD-ROM combo drive.
Could anyone let me know the correct model number for this combo drive please?
Best wishes
Michael

How about this:
*PA3073E-1CD2*
4x CD-R, 4x CD-RW, 24x CD-ROM, 6x DVD-ROM
and it supports this medias:
CD-R (read/write), CD-RW (read,re-write), CD-ROM, DVD-ROM, DVD-R (read only), DVD-RW (read only)
Greetings

Any need to partition hard drives for FCS or CS4 on my new Mac Pro?

This is my first post here but have learned a lot recently just by visiting various threads. I'm new to Mac and Final Cut Studio so I have a few questions about setting up the system and hard drives. I've read about partitions on hard drives on various sites but I wonder if that is outdated advice at this point. I will be learning FCS and CS4 by working on various SD DV and HDV/AVCHD projects so I want my system flexible but as high performance as I can muster. I will be working mostly in FCP and AfterEffects for a while and do intend to burn blu-ray discs eventually.
My system is a current Mac Pro quad core with 8gb RAM with current versions of final cut and adobe suites. I will do a clean install with snow leopard. I have a 640gb main drive and I've purchased three 1tb Western Digital black internal drives. I am wondering if I need to partition my main drive because I may want to also run a windows OS eventually for blu-ray playback. The other 3 drives are intended for project files, media/capture and back-up respectively. I don't have the budget for a RAID at the moment. So my questions for this thread are:
1. Do I need to partition the main drive now or should I wait until I need to do so with boot camp/windows installation later?
2. If I should partition main drive now, how much should I dedicate for the second partition on the OS drive for eventual windows 7/blu-ray playback?
3. Should I partition any of the three additional drives?
4. If I should partition any of those additional drives, how many partitions should I make and what sizes should the partitions be for each drive?
5. Is my plan for my four drives a sound one for my purposes? (os, projects, media, backup)
Thanks in advance for any help.

Hi, and welcome.
1. Don't partition your system drive until you need to. If you choose to run Windows via Bootcamp, you'll have to, in which case, 150GB will be plenty if all you want to do is playback (may even be overkill). However, you can probably do just as well running Windows under Parallels or VMWare, whch would be my recommendation. Performance is very good, and the ease of moving from OSX to Win makes them very convenient. Parallels (which I know better) automatically resizes the amount of space it needs to meet your usage. You can also run your Parallels virtual machine from somewhere other than your system disk. I imagine VMWare provides similar features. Both are well thought of.
2. Your disk use plan is OK, with one caveat - if what you're working on is critical to you, you should also have an external backup. With backup on an internal drive, there's a (very small, but definite) risk that, if the Mac Pro hit a disaster, your backup would be lost. I'd suggest an external Firewire 800 or eSATA enclosure and, either another drive, or just use one of the WDs there instead of internally.
3. Don't partition the other disks either. Just make sure they're formatted MAC OS Journaled (do this via Disk Utility). Another benefit of Parallels/VMWare is they allow Windows to read/write Mac formatted disks.
Hope that helps

Need a new hard drive for T43...

I need help finding a new hard drive for my T43. It appears that my hard drive is starting to fail. It just seems to not power up all the time during boot up or it just dies after it's in used for a little while. The T43 seems to only be compatible with certain types of hard drives though and I can't find any place that still sells them. Does anyone know of a place that still sells hard drive compatible with the T43?

Welcome to the forum!
Any PATA laptop drive will work as long as it's 9.5mm high, but most of today's drives will throw a "2010 error" on boot, which is really not a big deal IMHO.
The biggest hard drive that won't throw this error is Fujitsu MHV2120AH (120GB/5400rpm) that has been discontinued a while ago. Expect to pay a hefty premium for a sealed one.
A lot of good info here:
http://forum.thinkpads.com/viewtopic.php?f=2&t=11059
Good luck.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

Need SM Bus Controller Driver for A75-S231

Unfortunately I am without my system and backup disks and I am in desperate need of a driver for the SM Bus Controller. Problem surfaced after re-install of XP Home.
I called Toshiba tech support to identify the motherboard chipset shipped with my unit (specs listed at end of post) so as to locate and download the driver. Unbelievably, Tech is not equipped to identify the make or model of my motherboard or identify the chipset. Third Party software tells me I have a Toshiba EDW10 Motherboard and tech searched the internet and told me I have some VIA motherboard and good luck finding your driver.
Please help, I didnt think that Toshiba of all people would be unable to identify their own systems but here I am 4 hours later bothering you good people and still hunting. Does anyone have the SM Bus controller driver for the A75-S231 or tell me what chipset was shipped with my unknown motherboard?
My system specs are as follows:
OS Name Microsoft Windows XP Home Edition
Version 5.1.2600 Service Pack 2 Build 2600
System Manufacturer TOSHIBA
System Model Satellite A75
System Type X86-based PC
Processor x86 Family 15 Model 4 Stepping 1 GenuineIntel ~3333 Mhz
Processor x86 Family 15 Model 4 Stepping 1 GenuineIntel ~3333 Mhz
BIOS Version/Date TOSHIBA V1.30, 9/10/2004
SMBIOS Version 2.31
Hardware Abstraction Layer Version = "5.1.2600.2180 (xpsp_sp2_rtm.040803-2158)"
Total Physical Memory 512.00 MB
SM Bus Controller Device ID (from Device Manager) PCI\VEN_1002&DEV_4353&SUBSYS_FF001179&REV_18\3&61A AA01&0&A0
Motherboard Toshiba EDW10???
Thanks fo your help.

Hi
As far as I know your unit must be an US notebook model and please try to check Toshiba US download page under http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_home.jsp
Please dont be mad on tech support but I dont see any reason why they should know every technical detail of your notebook. Toshiba has designed drivers for every hardware component that you can have anytime you want and install it 1000 times if you want. Toshiba guarantee that it will work properly and I dont see any problem there.
Technical details you can get from Authorized service partners in your country.
Good luck!

Need to find printer driver for OS 9.0.4 for Epson Stylus NX415

Here's my problem:
I have an old strawberry-colored original iMac, running OS 9.0.4.
I also have an Epson Stylus NX415 all-in-one printer.
But -- the iMac does not recognize the printer.
In order for this printer to connect to this Mac, I need to have a "printer driver" extension that I can install (and then restart), so that the printer appears in the "Chooser" window, so I can select it there.
I'd need either a printer driver specific to the NX415, or some kind of generic Epson printer driver compatible with this specific model.
But here's the problem: I think the NX415 was first manufactured AFTER OSX was introduced, so it could be that Epson never even bothered to make a printer driver for OS 9 for the NX415.
Help!
I've scoured the Internet and legacy sites that specialize in old OS 9 software, and also scoured Epson's site, and could not find any appropriate printer drivers in any of those places.
Any suggestions, or specific links to where I can download such a driver?
Or is it the case that this printer simply physically will NEVER work with this model of Mac, and I should just give up?
Any help would be greatly appreciated.

Hello,
A good guess would be that you are right in that an NX415 driver for Mac OS 9 was not made because of the fact that the printer is much newer than the operating system. It is probably going to be difficult to find a Mac OS 9 driver for another model that will allow any or all parts of the all-in-one printer in question to work properly. However, if you wish to carry out experiments, the Mac OS 8/9 drivers on the Epson support page for CX3200 may be as close as you can get.
Perhaps someone else has a better idea.
Jan

Need DVD/ CD-RW Driver for Z60m

Similar Messages

Maybe you are looking for