Need ecc and pi integration steps

I have installed ECC6 and Pi in two different systems.Now i want to integrate ECC and PI.But i don't have much knowledge on integration between these two.Could someone please provide me steps for integration between ECC6 and PI.Thanks in advance.

Hi,
As you mentioned you are looking for ECC to PI integration.. let me provide you few basic things..
SAP PI is a middleware and used for SAP to SAP ot SAP non-SAP integration..as you said you have installed ECC and PI.. that means you got ECC system as Sender or Receiver system and PI as middleware integration tool.
let me provide few more basic details..
through PI we can connect to Database by using JDBC adapter
we can connect to FTP by using File adapter
or to some other SAP system by using RFC and IDOC adapter
or some JMS queue by using JMS adapter.. and so on.. so as beginner I will suggest you to start with basic scenario which is File to IDOC ot File to RFC or IDOC to File or RFC to File..
As you now have ECC you can have IDOC and RFC adapter and the only thing you need is installed FTP and start with basic scenarios as mentioned above..
now for steps by step procedures and all you can search SDN and there are many weblogs, articles step by step guides available.. so use it..
Thanks,
Bhupesh

Similar Messages

I need ECC 6.0 installation steps with screenshots

please send me the ECC 6.0 installation guide.I need ECC 6.0 installation steps with screenshots. my mail id is <removed by moderator>.thanks in advance.

need SAP CRM 4.0 installation guide with screenshots.
Markus

How to or Step by step to connect SAP ECC and Data Integrator

Hi,
I need a document How to or Step by step to configure and connect SAP ECC 6.0 and Data Integrator or Data Services.
someone help me?
thanks!!

Antonio,
Please find the detail guide step-by-step document for different connectivity types at this following link on SDN under business Object section.
[http://wiki.sdn.sap.com/wiki/display/BOBJ/ConnectingtoSAP]
Thanks,
Ashok

ECC and GTS integration

Gurus
If using ECC and GTS, what is ususally done with the "Foreign Trade" fields in the ECC? Apparenlty these do not transfer to GTS. This may be confusing to the user to present fields that do nothing. What is the best practice for addressing the Foreign Trade tab in ECC?
Thank you!

Hello,
I am assuming you are talking about the fields that are found in the Delivery documents in the Foreign Trade / Customs Tab.
Actually, these fields are still used. Some of them are transferred to GTS and some do not need to, but are used for Intrastat Reporting. The fields taht are transferred to GTS are the following
In headder its the ones under Handling & Geography. At item Level its the ones in Origin/Destination/Business.
Regards,
Marc

SAP MM and SD Integration steps

Hi Friends,
This is Ramakrishna,can any one give proper information about MM&SD integration, steps and process interview point of view.
And also MM&PP Integration(MRP)
Regards
Ramakrishna
Doha,Qatar

Hi Ramakrishna,
[Link Between SAP SD, MM & FI |http://www.sap-img.com/sap-sd/link-between-sap-sd-mm-and-fi.htm]
[MRP|http://help.sap.com/erp2005_ehp_03/helpdata/EN/ff/515c4749d811d182b80000e829fbfe/frameset.htm]
Thanks and Regards,
Naveen Dasari.

FICA and AUDDIS Integration steps

Hi Guru's
We are planning to Implement AUDDIS and we are using the FICA. I tryed to attached external format AUDDIS standard version to see the output, but it is giving dump and reason is below. Can anyone help me please. Thank you
Termination occurred in the ABAP program "SAPLFKPMASS" - in "FILL_PAYHSRT".
The main program was "RFKK_MASS_ACT_SINGLE_JOB ".
In the source code you have the termination point in line 639
of the (Include) program "LFKPMASSFF0".
The program "SAPLFKPMASS" was started as a background job.
Job Name....... "PAYP20140305TESTD_002"
Job Initiator.. "RGURRAM"
Job Number..... 12050500
The termination is caused because exception "CX_SY_DYN_CALL_PARAM_MISSING"
occurred in
procedure "FILL_PAYHSRT" "(FORM)", but it was neither handled locally nor
declared
in the RAISING clause of its signature.
The procedure is in program "SAPLFKPMASS "; its source code begins in line
603 of the (Include program "LFKPMASSFF0 ".

Hi Ravi.
I had the same error in similar environment, when I tried to incorporate the local required payment medium for FPY1 run.
I resolved the issue by correctly setting the events in FQP3 and mapping them to correct Function Modules.
Hope it helps in your case.
Marko

Need to maintain same data in ECC and MDM

Hi ,
Could you please tel me why we need to maintain same data in MDM and ECC seperately.
Regards
Ramya

HI Ramyadixit,
It is important to understand that MDM and ERP do not replace eachother rather complement each other.
Using SAPu2019s ERP suite as the foundation technology for an MDM implementation is problematic because, despite all the positives of ERP, flexibility is usually not associated with SAP systems.
SAP ERP doesnu2019t offer the tools to manage master data in the ways required by todayu2019s complex organizations.SAP ERP isnu2019t designed for active management of critical master data. Specifically, SAPu2019s data matching capabilities are too basic. Its search functions might be good at u201Cexact matchu201D but they are not as strong at the kind of u201Cfuzzy searchingu201D that is so important in uncovering duplicate entries with subtle differences. For the same reason, users are far more likely to create new duplicate customer records in SAP, and thereu2019s no way to create a u201Cgolden copyu201D of master data for use across multiple heterogeneous systems, or to maintain survivorship rules for overlapping data from multiple systems.
These problems are all compounded when you have more than a single SAP instance, or different ERPs altogether, which is a very real occurrence within large corporations that have grown through mergers & acquisitions. Even without multiple ERP instances, most mid-size and larger national firms are likely to pull data from many different systems. In fact, 10 to 30 source systems is not uncommon, and heterogeneous environments are now the norm. The siloed approach to data management whereby customer-facing data is in one system, product data in another, asset data in a third, and so forth, really complicates the integration of processes, data and workflow.
A dedicated MDM hub provides a multitude of benefits not attainable with an SAP ERP-based master data approach. First, a dedicated MDM system is just that -- dedicated to delivering the best possible manageability of your master data across the enterprise, and not just within your ERP technology stack. The focus of any high-quality, enterprise-grade MDM hub implementation is going to be on getting master data right; creating a single source of truth, with each distinct customer, product, etc. represented only once in the hub. This means you can maintain accurate, complete, timely and consistent master data through both data governance and hub technology, with robust data quality and matching capabilities.
MDM and ERP need to coexist for instance as one solution does not replace the other. From an investment perspective, it is important to leverage existing technologies such as data quality, extract-transfer-load (ETL) and data integration tools, middleware, business process management and workflow.
To summarise, the top five reasons not to master your data in SAP ERP are:
1. SAP ERP isnu2019t flexible enough.
2. Master data is different and canu2019t be proactively managed within an SAP ERP system.
3. SAPu2019s ERP products werenu2019t designed for active management of master data.
4. Mastering data in an ERP system is much more difficult with more than one instance or when different ERPs are used together.
5. An MDM hub creates a workspace between an organizationu2019s transactional and analytic systems meaning they fix it once and then extend it for use in back office systems and the data warehouse.
Hope it helps!
Thanks,
Ravi

Need a solution for integration BPM and UCM 11.1.1.4?

Hi all,
Currently, I am using BPM & SOA 11.1.1.4.
Could somebody advise me a solution for integration BPM and UCM ?
I heard somebody said that need to wait to BPM 11G patch set 5 (11.1.1.6) version, which have basic BPM and UCM integration and haven't to using external API like RIDC or CIS.
Thanks & Regards.
Ming Nguyen.

Do not use prebuilt binaries, but compile the package from source with the current libudev.
sha256sums=(SKIP)
source=("$pkgname::git+https://github.com/rogerwang/node-webkit.git#tag=nw-v$pkgver")
to build it in the PKGBUILD, use nw-gyp i guess.
Last edited by progandy (2013-06-21 22:54:36)

Metadata Integrator for ECC and MDM

Hi ,
Please help me choose the correct Metadata Integrator for the following:
1. ECC
2. MDM
Thanks in advance,
Munavar

HI Manoj,
Thanks for your reply. Yes, I am looking for integrators for ECC and MDM.
How do we pull metadata from ECC and MDM into BOMM?
Thanks,
Munavar

ECC SAP TM integration (Is really XI needed)

Hi,
I just started working on TM and I´m confused with the integration between ECC and TM.
I read that from version 6.0 we can integrate via IDOC or services.
We are planning to use a different integration platform, so, I believe that with the services from ESR (Integration of Transportation Management System ES bundle) should be enough.
Can anyone confirm that?
Thanks and regards,
Isidoro!

Dear Isidoror,
I am not sure whether my answer is userful to you or not as your question is not very much clear to me.
DELVRY03 is the Idoc type which can be used to transfer the Delivery from SAP ERP system.
SHPMNT05 idoc type can be used to transfer the Shipment for the tendering purpose from the SAP ERP System.
Using above Idoc, data can be transferred from ERP to TMS with out using SAP XI system.
Hope this will help you to reach the solution else pls provide the clear picture about your problem.
Regards,
Vikram
Edited by: vikram chouhan2009 on Oct 7, 2009 11:22 AM

Brief discussion on SAP XI and its' Integration with SAP MDM.

Hi,
I have never worked on SAP XI.
I am discussing it on brief, please give your valuable replies.
SAP XI consists of System Landascape Directory(SLD).
SLD Consists of Business System and Techinical System.
Technical System contains all information about the software
component. The Business System consists of Inbound and Outbound Business
System which are used as logical names for data transfer.
There is communication Channel for Receiver and Sender Business System and n agreement
is signed between Sender and Receiver.
Outbound Interface defined for Business System Outbound and Techical System associated
with the Business System,
Inbound Interface defined for Business System Inbound and Techical System associated
with the Business System.
In SAP NetWeaver XI Integration Directory, we have defined the Integration Scenarios,
Actions, Interface Objects, Mapping Objects, Adapters Objects.
Mapping Object defines the Structure and Value Mapping.
Adapter Objects defines the Adapter program which implements RFC Adapter, FTP Adapter logic.
FTP Adapter is used for XI-MDM Communication.
RFC Adapter is used for XI-ECC Communication.
Integration Repository: Both Outbound and Inbound Interfaces are Mapped with Value mapping and
Structure Mapping inside Integration Repository.
The File Adapter takes the File from the Outbound port of MDM System
and sends it as IDOC to Receiver Business System.
Value Mapping must be done between Sender and Receiver interfaces.
Value Mapping is done by XSLT or Java based program.
SAP NetWeaver XI Integration Server at runtime:
Message Split, Interface Determination, Receiver Identifaction, Mapping, Techincal Routing
and Call Adapter Proccess are done.
In SAP XI 3.0 and MDM 5.5:
Step 1: Create busines system as service.
Step 2: Create communication channel for each business service. If the system can communicate
through different channels, then create all possible channel types if necessary.
Step 3: Create receiver agreement between the systems.
Step 4: Interface determination:
- Here you see for the first time the software component mentioned;
there are some special requirements regarding this software component in relation to the customizing ID mapping.
- To modify this software component, the customer needs to copy the SAP standard delivered software component
into its own namespace. The customer is able to modify to create archives
for the customized ID mapping.
Receiver determination.
Configure an FTP Server on the MDS.
Create a send folder for outbound messages using outbound port(s) for
remote systems(s).
Create receive folder inbound messages using inbound port(s) for remote systems.
This ia all about concept of SAP XI Infractsture and its' Integration with SAP MDM 5.5.
Regards
Kaushik Banerjee

Hi Kaushik,
You must be aware of File types that MDM Import Manager can Import i.e. we have XML, Excel etc. Now there are two transactions to extract data from R3
1. MDMGX -
         - For lookup table extraction
         - Output in XML format which MDM can import without using XI.
          - FTP can be configured to put the file in the desired folder which will be then picked by Import Server.
2. MDM_CLNT_EXTR -
          - For Main table records.
          - Output is in Idoc format which MDM doesn't understand hence we need XI in between which converts Idoc file received from R3 into XML which can then be imported using Import Manager or Import Server. For this we need to implement XI Scenario that consists of Source System, Receiver System, Type of Data etc.
Just a basic understanding...
Regards,
Jitesh Talreja

Test/Trial project on MDM and XI integration.

Test/Trial project on MDM and XI integration.
I want to try out a test case scenario where in i would be importing and exporting data to XI (Using XML files i guess)
I am a newbie in MDM integration.
Please help me out with my trial project.
What i already have:
I have MDM system and repository on which i have been learning basic MDM designing a (test)repository of my own.
What information i need:
-What all system requirements (XI system configuration and all) are needed to established. (What all should i be asking the XI and the system admin guys to be able to get the platform ready for me.*
*-The further procedure for actual integration to be done for importing/exporting data as in a real time project scenario

Hi Gaurav,
SInce you want to try a test scenario including MDM and XI, I would suggest you to try
ECC -> XI->MDM scenario
Wherein you can take the data from ECC in the form of IDOCs and convert them into XML.
You can then import the XML into an MDM repository. MDM repository can be a Customer, Material, Vendor etc repository. Hence extract the similar data from ECC.
Kindly follow the steps below:
1) Firstly you will have to extrcat the look-up table data from R3 using MDMGX transaction-
Please follow this link to know about the same:
How to Configure Master Data Management Reference Data Extraction -
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f0740b31-a934-2b10-2e95-af2252991baa
https://websmp203.sap-ag.de/~sapidb/012006153200000394732006E/MDM554_GenericExtactor.pdf
2) For loading the main Table Data into MDM, kindly follow the link below, which will guide you to the config/prcoess that will be required for the data to be uploaded from R3 into MDM.
2.1) R/3-XI-MDM (Outbound Scenario)
You will have to extract the data from R3 in the form of IDOCS and then using XI, you will have to convert them into XML format as MDM understands that.
2.2) For the process of Data from MDM back to R3, kindly refer this link below:
MDM-XI-R/3 Integration
2.3) For general info about this scenario, kindly refer this link below:
MDM Mass data Integration with R/3 made easy
Please follow these links for additional info-
1) SAP Network Blog: XI Configuration for MDM Integration - Sample Scenario-
XI Configuration for MDM Integration - Sample Scenario
2) The below given blog can be used to understand the XI config done when data is sent back from MDM via XI to R3.
MDM->XI->R3
MDM-XI-R/3 Integration
3) MDM 5.5 data distribution using SAP XI -
MDM 5.5 data distribution using SAP XI
Hope this information helps.
Thanks and Regards
Nitin jain

Oracle Portal and Discoverer Integration

Portal Version: 9.0.2.0.1
RDBMS Versjion: 9.0.1.3
OS/Vers. Where Portal is Installed:: Suse 7 SLES
Error Number(s)::
Oracle Portal and Discoverer Integration
We're trying to integrate Discoverer with Portal unsuccessfully.
We made many things in accordance with oracle's documentation until add discoverer portlets (worksheet and list of workbooks) in a test page.
In view mode, the worksheet portlet shows the error:
"The portlet has not been defined. The publisher must define the portlet by clicking on Edit Defaults for the portlet on the edit mode of this page. Please contact the publisher of this page."
We think we have to edit properties before. Is this? Anyway edit worksheet portlet crashes between step 1 and 2. The error is: "The listener returned the following Message: 500 Internal Server Error".
We have a public conection created in EM and a discoverer application which can be viewed using plus or viewer.
Furthermore, it's not possible delete the added portlets neither the page that contain it. The error at delete is:
Error: An unexpected error occurred: User-Defined Exception (WWC-44082)
(WWC-00000)
An unexpected error has occurred in portlet instances: User-Defined Exception (WWC-
44846)
An unexpected error occurred: User-Defined Exception (WWC-43000)
The following error occurred during the call to Web provider:
oracle.portal.provider.v2.PortletNotFoundException
at oracle.portal.utils.v2.ContainerException.fillInStackTrace(Unknown Source)
at java.lang.Throwable.<init>(Throwable.java:78)
at java.lang.Exception.<init>(Exception.java:29)
at oracle.portal.utils.v2.ContainerException.<init>(Unknown Source)
at oracle.portal.provider.v2.PortletException.<init>(Unknown Source)
at oracle.portal.provider.v2.PortletNotFoundException.<init>(Unknown Source)
at oracle.disco.portlet.provider.DiscoPortletPersonalizationMgr.destroy
(DiscoPortletPersonalizationMgr.java:65)
at oracle.portal.provider.v2.DefaultPortletInstance.deregister(Unknown Source)
at oracle.webdb.provider.v2.adapter.soapV1.ProviderAdapter.deregisterPortlet
(Unknown Source)
at java.lang.reflect.Method.invoke(Native Method)
at oracle.webdb.provider.v2.utils.soap.SOAPProcessor.doMethodCall(Unknown Source)
at oracle.webdb.provider.v2.utils.soap.SOAPProcessor.processInternal(Unknown Source)
at oracle.webdb.provider.v2.utils.soap.SOAPProcessor.process(Unknown Source)
at oracle.webdb.provider.v2.adapter.SOAPServlet.doSOAPCall(Unknown Source)
at oracle.webdb.provider.v2.adapter.SOAPServlet.service(Unknown Source)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:336)
at com.evermind.server.http.ResourceFilterChain.doFilter
(ResourceFilterChain.java:59)
at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:283)
at com.evermind.server.http.ServletRequestDispatcher.invoke
(ServletRequestDispatcher.java:523)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal
(ServletRequestDispatcher.java:269)
at com.evermind.server.http.HttpRequestHandler.processRequest
(HttpRequestHandler.java:735)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:151)
at com.evermind.util.ThreadPoolThread.run(ThreadPoolThread.java:64)
(WWC-43147)
Edit properties for portlet List of Workbook works but in view mode we have the error in the portlet area:
"Failed to refresh portlet. Please verify that the information used to create the
portlet instance or customization is still valid. Otherwise, please contact your
iAS administrator. oracle.discoiv.controller.FatalControllerException:
DiscoNetworkException - Nested exception: org.omg.CORBA.OBJECT_NOT_EXIST: minor
code: 0 completed: No null"
Any ideas?
Thanks

Hi there,
Have you applied any patches to 9ias since it was first installed? We had the same problem and had to apply a couple of patches to get the portlets working.
1. Apply the 9.0.2.53.16 one-off patch for Oracle 9iAS Discoverer which takes Discoverer up to 9.0.2.53.16. This patch appears to be password protected and you need to get someone at Oracle support to give you a password.
2. Apply the Discoverer Portlet Provider: 9.0.2.53.00c patch (patch no. 2595444) which gives you a new discportal.xsl file that actually works. It's this second step that solves your problem but you need to do step 1 before this. This is password protected as well.
3. As you've upgraded Disco on the server to 9.0.2.53, you'll need to upgrade Disco Admin & Desktop within your 9iDS installation using patch no. 2555265. This is because Disco 9.0.2.53 uses an upgraded EUL that Disco Admin & Desktop need to be patched to use.
This was the course of action Oracle support advised us about nine months ago. Of course they may have released a further patch to Disco that does 1 & 2 in one go, but we regularly carry out steps 1 and 2 on servers we use and we can use the Disco portlets successfully.
Hope this helps
Mark Rittman
[email protected]

Facebook and Twitter integration not working

I'm have trouble using Facebook and Twitter integration in Mountain Lion. When I click 'Click to Tweet', or 'Click to Post', nothing happens; I don't get the notecard looking thig, and it's like I never clicked the button. Same thing with sharing from an app, except for Twitter. I receive notifications from both just fine, but I'm unable to post. I can tweet something from the sharing menu (link to a webpage with Safari, for example), but I cannot send a tweet using the 'Click to Tweet' button in Notification Center. Also, I cannot post to Facebook by neither sharing nor the 'Click to Post' button. So far I have tried sharing with Safari, Finder, and Preview, all with the same results. (Facebook sharing with iPhoto does work, but I don't believe that is integrated with OS X.)
I have also tried the following, with no luck:
Checked my settings on the Facebook and Twitter sites.
Removed my acounts and re-added them.
Obviously, my internet connection is working.
Added my Facebook account to the 'Guest User' account, and another administrator account.
Had a friend add his Facebook account to his own (limited) account on my computer--he could not post to Facebook either.
I believe the last two things I tried indicate that this is a system-wide problem. A couple more things to note: 1) there is no kind of error message; it just sits there, like nothing happend, no 'spinning wheel' or anything. 2) It DID work before. Twitter worked when I first upgraded to Mountain Lion, and Facebook worked when I installed the 10.8.2 update. I don't use either often enough to know when exactly they stopped.
Here is a video illistrating my problem.
It's been driving myself crazy with this over the past few days, and can't seem to find an answer anywhere. I also seem to be the only one with this problem.

First, I would eject whatever it is that you downloaded. Go to Finder and eject it that way or depending how you have your system set up, do the two finger tap and Eject it. Download the link above. Once it downloads, double click it to install it. It should work. If it doesn't you need to use your Disk Utility to check for errors. Click your Finder again and then Applications. Scroll down to Utilities and then Disk Utility. Click on your hard drive and you will get a menu of items on the right side. Towards the bottom, you will see a button to Verify Disk Permissions. Click that and let it run. It may take a few minutes to finish. Once it's finished there may be a list of things wrong with your system. Click the Repair Permissions and let the computer do it's thing. Use Disk Utility at least once a month to make sure everything is in order on your system. If this doesn't fix it, I don't have any other suggestions. I'd hate to say do a fresh install but that might be the next step if this doesn't work.
Something else to consider is that is if you use Time Machine and the system did work at one point, you could go back to the last known good point and reinstall that back-up. You would lose anything you have saved since that point (obviously). If you take steps to back up your information, that should not be an issue. (For me), Time Machine works as advertised. If you are not backing system up regularly, shame on you. You need to start ASAP backing up. It's an easy process and it's times like you are having now, that make the small preventive maintenance, worth extra time and effort.
Good luck.

Communication between ECC and CRM

Hello,
I am in phase of showing communication between SAP CRM 5.0 and ECC 6.0.
I am struggling with finding some simple transactions which are common in both, with which I can show correct connectivity between ECC and CRM.
I need to save some data from CRM and access the same via transaction within ECC, save some data via ECC and access it via CRM. I already established RFC link between ECC and CRM.
Probably communication between SD module of ECC with CRM.
Can you please help me out with this, a clue/correct direction will be of very helpful. Basically I want to know, what transaction I can use for same.
Any help is really appreciated.
Thanks
-Vishal

Hi Glenn,
I followed all steps in document mentioned above. In the end during execution of transaction I selected appropriate source and destination, when I click start transfer objects, it gets stuck in waiting phase.
Among those steps I was not able to perform step#10. Creating Subscriptions for OLTP. My ERP is not displaying this option under subscription wizard. Should it be reason for not starting transfer ? I also do not see ERP logon screen when I select transfer.
My another question is when transfer will complete, where I'll be able to see transferred objects within ERP database ?
Thanks
-Vishal

Need ecc and pi integration steps

Similar Messages

Maybe you are looking for