Need effect Equipment Deletion with Install Base

Hello Experts,
I marked one equipment for deletion at ECC GUI & the same effect been moved to CRM web channel via middleware.
But now my requirement is i need to mark a deletion & inactive indicator at same Install base automatically when i mark the equipment for deletion indicator.
First of all suggest if there is any standard available for this requirement & if not tell me how to develop this.
NOTE: Main aim here is to restrict any Complaint/repair order creation to be created for the duplicate equipment/ibase record done by the user end.
Thanks.
Rip

If I buy an Airport Extreme Base Station and connect it with my Cable Modem, then directly into my G4 does this eliminate the need for a Airport Card installed inside my computer.
Yes that is true. If you connect the G4 to the AirPort Extreme base station (AEBS) via Ethernet you do not need an AirPort card installed.
Do I need to install a Airport Card or PCI card in my G4 if it's connected to the base station???
No

Similar Messages

How to link Sales Order with Service Contract and then with Install Base?

Hi Friends,
1) I would like to know the integeration process from sales order to Service Contract and then with Install Base.
2) I couldn't see anything enabled in Service Tab in Order Lines, its grayed out. Is there any set up/profile option to get it enabled?
3) How can we create AR invoice from Service Contract?
Please let me know if anyone has idea on this.
Thanks in Adavance,
Vara

Dear Sid,
Thanks for your promt response.
Let me explain you what I did.
1) I have booked a Bill Only sales order which has one order line, mentioned it as Service Item and provided the same details in Service Tab in Order lines. Now Line status is "Fulfilled"
2) Then Submitted Workflow Back Ground Process for OM Order Lines and it has created an AR Invoice and closed the line
3) And then submitted "Service Contracts Order Capture Integration Program" from SErvice Contracts Responsibility and it completed normal.
4) Now I went in to Launch Contracts Window and queried with the sales order but couldn't see any contract created
5) Then I went in to Reprocess Order Window and found this order shows an error message as "Referenced Product not present in the Installed Base", then I tried to reprocessed it, but the same error message again.
Here I have few doubts:
1) Are the AR invoice and Service Contract Billing Invoices same?
2) In above scenario AR Invoice has been created, I would like to do the billing from SErvice Contracts and need to create an Invoice in AR? how can I do that?
because as you explained in one of my questions earlier, A Single Invoice can be created for the whole duration of the contract. I want to do that and trying for the same.
3) Regarding the above error message, how can I resolve it and create the service contract against that Order?
Thank you so much for your helpful answers.
Regards,
Vara

Installed bases-controlling with ABAP

I need to create and populate installed bases (IBIB, etc) from ABAP. i have looked through the objects in SE24 and through the function modules in SE37, and quite frankly, i am stumped. i find NO BAPIs, no documentation (in English, anyways), nothing...
Every function module requires a "handle", but the call to IB_GET_HANDLE does pretty much nothing. it does not create a handle in the table where the system apparently wants it. If i try to load that table in my code, it will still not be seen becuase it is in a different scope.
As i said, i am at a loss. I want to:
1. create a new installed base (type 01)
2. put either materials or serialized equipment under it
simple, it would seem...

Hi David!
Jumping a little bit through the where-used list, I found following call:
*--- Fetch Ibase Handle
    IF ib_handle IS INITIAL.
      CALL FUNCTION 'IB_COM_NEW'
           IMPORTING
                e_ibco_handle = l_handle.
      ib_handle = l_handle.
    ENDIF.
Looks promising, at least first step of getting valid handle should be done.
IB_COM_NEW is used quite often, maybe you find some more hints (like FM IB_COM_SAVE_AND_FREE).
Regards,
Christian

Need to know How Install Base Items gets Interfaced when an Item is Shipped

Hi,
I am creating a sales order with Install Base item. When we book and Ship the Order the Item comes to Install base with the Serial Number.
Please let me know if there is any workflow or the process which is doing this.
There is some Standard Process or link between Shiiping and Install base. Please explain this. I have checked the Order Header and line workflow for the Item type and i could'nt find any function which is doing this.
Thanks and Regards,
Ragni Gupta

Thanks a lot for the Info as i was Searching the Line workflow for Install Base Functions. :)
I am New to Install Base.. I got to know that We are Using SFM to push the Details to Install base
What are these Xnp_Msgs tables.. Please give more Info On these
I did some R&D and found Below Tables for Install Base
csi_t_transaction_lines
CSI_ITEM_INSTANCES
csi_t_txn_line_details
Is there any Other Important Base tables or Interfaces for Install Base. Thanks a lot for your help..
Please suggest any Documents which will explain these Integration between the Modules so that i can understand the data flow
Thanks and Regards,
Ragni Gupta
Edited by: Ragni^^1234 on May 10, 2013 8:23 AM

Individual object settype in installed base

Hi,
We have created many set types for individual objects.So,If I go to Individual object application I get a new tab general where all these fields displayed.
But we need those details in the installed base application itself,while clicking the corresponding individual object.
Is there any way to get it done without writing Model access class for installed base application.
Thanks and Regards,
Abdul Raheem .S

Hi Abdul,
This is a new feature for CRM 5.0. To implement this in CRM 4.0 is very difficult because several components are affected. New functionality have to be implemented for the ibase access class, product (iobject) access class and for the settype generation (TA COMM_HIERARCHIE etc.).
At first the settype generation has to be modified, because if you create or change any settypes in TA COMM_HIERARCHY, several entries in the different tables of the TA CRMC_BLUEPRINT have to be generated. In CRM4.0 these entries will be generated only for the product or iobject application (both use the same access class).
Then you have to modify the product(iobject) access class: You need a method to set the product guid external and you need a method to control the display mode (if the ibase is locked, no changes at the settypes are allowed, because it is possible that someone edit them in the SAPGUI (IB52)).
At last you have to modify the access class for the ibase application to handle the product specific data. In this class you have to map the ibase component object key to the product(iobject) guid and you have to call the CHECK_ACTIVE_TABSTRIP method of the product access class before the controller with the settypes tabstrip is displayed the first time (the product tabstrip contains all entries for all settypes and with the first call the access class filters these entries ->product guid->category->settypes).
Sorry, but a simple implementation is not possible and its not recommended to modify the above mentioned transaction or access classes. In CRM 5.0 this is a standard feature in the ibase application of the pc-ui.
Best regards,
Oliver

Oracle Installed Base

Does the Oracle Installed Base system, lend itself to being populated with Install Base data from legacy ERP systems? It's my impression that the Install Base data, starts in inventory and ends at a customer location, but is it a requirement that everything start in inventory?
Thanks

is it a requirement that everything start in inventory?Nope, I usually start from scratch.
Seriously now:
Give us a clear picture, if possible, provide some links or whatever. Anything.
http://tkyte.blogspot.com/2005/06/how-to-ask-questions.html

Installed Base DataSource

Hello CRM/BI Experts -
I need the 'Description' of the Installed Base in my report. However, I can't find the datasource for this particular field.
When I do a F1 on the field in CRM, I get the following:
Table: IB0030
Field: DESCR_PRODUCT
The table is actually a structure.
Any help would be greatly appreciated.
Thanks!

check this blog it is helpful:
/people/sap.user72/blog/2005/09/05/sap-bw-and-business-content-datasources-in-pursuit-of-the-origins

Equipment hierarchy with Non serialized products to Installed base in CRM

Hi,
I have just performed an equipment download from R/3 to CRM. I now have these records created as individual objects assigned to an installed base.
However my equipment record in R/3 has Serialized Products as well as non serialized products in form of BOM (bill of material).
Example: Equipment Hierarchy (In R/3 )
    10123428 Main Equipment have 2 non serialized product
199-012100         (Non serialized product under this equipment)
                270-012200         (Non serialized product under this equipment)
       10123429         Subordinate equipment to main equipment
                              (Serialized product )
340-070800 (Non serialized product under this 2nd equipment)
              270-562700 (Non serialized product under this 2 nd equipment)
The Main equipment(10123428) is created as installed base in CRM successfully.
     The Subordinate Serialized product (10123429) to main equipment is created as individual object under this Installed base of the Main equipment properly.
     But the non serialized products (199-012100,270-012200 ) for main equipment and non serialized products (340-070800 ,270-562700)for the subordinate serialized product are not coming in CRM .
Because When I go to IB53 transaction there is no entry in the components in the product Tab under product id column.
Has anyone replicated R/3 equipment records with BOM structure into CRM and got their Non serialized products visible in the components of the Individual objects.
Any help would be most appreciated.
Regards,
Rahul

Hi Prabhakaran,
You can filter the data downloaded from R/3 to CRM based on the filter criteria assigned to adapter objects. You can do this via transaction R3AC1 wherein you specify the table and fields based on which you want to filter out the data.
For Serial Numbers and Equipments the business objects are SERIAL and EQUIPMENT respectively.
Reward with points if this helps.
Regards,
Gaurav Gera

I have lost nearly all my photos and events. I received a message effectively saying that I need to upgrade from an old base. I think I may have tried to open an event that was stored in iPhoto Buddy a few days ago.

I have lost nearly all my photos and events. I received a message effectively saying that I need to upgrade from an old base. I think I may have tried to open an event that was stored in iPhoto Buddy a few days ago. iPhoto Buddy is not supported in Lion. How can I retrieve my phjotos?

What version of iPhoto?
Assuming 09 or later...
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD

When I try to delete my current installation of firefox or install new one it always leads me back to the same place, telling me i need to restart computer to install upgrade, but does nothing, how do i get new installation?

I have windows 7. When i recently installed windows updates I began having script errors for firefox and my weatherchannel programs. I went to control panel, programs and features and tried to delete these 2 programs to install new ones. It seems like the programs didnt compeletly uninstall because they are still listed in my programs but have no file size. I downloaded latest version of firefox but it wont install. It tells me i need to restart computer to install a previous upgrade. I do that and nothing happens. I keep going around in circles.

If you have problems with updating or with the permissions then easiest is to download the full version and trash the currently installed version to do a clean install of the new version.
Download a new copy of the Firefox program and save the DMG file to the desktop
* Firefox 5.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Trash the current Firefox application to do a clean (re-)install
* Install the new version that you have downloaded
Your profile data is stored elsewhere in the Firefox Profile Folder, so you won't lose your bookmarks and other personal data.
* http://kb.mozillazine.org/Profile_folder_-_Firefox

Plant Maintenance - Deleting installed base

Plant Maintenance - Deleting installed base
I have set up deletion flag in an installed base and trying to create a new one with the same material and serial number.
But system given error saying that already exists.
Pls advise.

hi
go with this link
http://help.sap.com/saphelp_47x200/helpdata/en/19/db7cd6d82c11d19ddf0000e8323350/frameset.htm
-ashok

Need to download airport utility 5.6 on OS X 10.7.5 to work with older base station

need to download airport utility 5.6 on OS X 10.7.5 to work with older base station & airport extreme but install fails

I used Pacifist to install AU 5.6 on Mountain Lion. I think it works for Lion also.

I accidentally deleted my Acrobat 9 from my MAC and need to reinstall but the install file isn't there.

I accidentally deleted my Acrobat 9 from my MAC and need to reinstall but the install file isn't there.

That is the gmail server which has nothing to do with your iphone or Apple.
contact gmail.

I need to recover deleted notes from my iPhone 6 with PhoneRescue but it won't open on my MacBook Pro OS10.7.5

I need to recover deleted notes from my iPhone 6 with PhoneRescue. I installed the App but it won't open on my MacBook Pro OS10.7.5

The Software Update pane of System Preferences won't show full version upgrades. If your Mac is compatible with Yosemite, you can either download it from the Mac App Store or order a download code for Mountain Lion from the online Apple Store.
(122645)

How do I delete partially installed apps. I erased iPad and installed iOS8. I installed new apps. Suddenly all paged populated with old apps that never install and I can not delete.

How do I delete partially installed apps. I erased iPad and installed iOS8. I installed new apps. Suddenly all paged populated with old apps that never install and I can not delete.

Hi Try a Reboot press power & menu button hold both down until you see the Apple Logo you will not lose any data But you me need to do this more than once. Cheers Brian

Need effect Equipment Deletion with Install Base

Similar Messages

Maybe you are looking for