Need elp to create the process code for inbound idoc !
When I am creating a process code in WE42 and associating a
function module then another screen comming while saving....but in that screen in the drop down list..i didnt find the function module....how to solve ?
Hi,
Use transaction BD51 to make the FM known as an inbound FM.
Regards,
John.
Similar Messages
-
Process code for inbound idoc's
hi friend,
i want to create a zprocess code for inbound idoc's pls i want to step or code.
regrads and thanksHi
Are you using the customised idoc i:e message type .I hope most of the data transfer techniques always has a standard message type and if you are using one such than you can check in transaction we42(inbound process code) .All the steps have been rightly been mentioned for this querry of yours if you can clearly explain as to what message type are you using and for what purpose i can send you with documentation with steps to you.At the end of the day you will be posting idocs so that the data is being reflected in the segments .The things to be noted down is :-
1.Maintain Partner Profile(we20) which is the sender system are you using ?
2.If the satus is 53 it is sucess(green ) else 64(being processed-yellow) or 51(error-red)
3.If you trigger by workflow than you have to use Message Variant .
If you are ok or incase do face any issues please do reply to the forum.
Regards
Somnath -
Process Code for Outbound Idoc
Hi All,
We need to find out the Process Code for an Idoc.
Note : We dont have access to WE41, WE20 ,BD51.
Could you please suggest any alternatives.
Thanks,
SanjeetHi Gautham,
Thanks for ur reply.
But still we hv not *** to the solution.
We have available information as following:
Basic Type : DESADV01
Extension Type : EXTDES03
Message type : DESADV
Partner NUmber : XXXXXX
Partner Type : KU
I checked in Table TMSG1 and i got more than one similar process codes for the same message type.
Actually I have the generated Idoc number and we are trying to reach to the FM which populates the Idoc segments.
So if we get the process code, we can reach to FM.
Thanks,
Sanjeet -
Process code for inbound credit Memo
Hi All,
May know what is the process code for inbound Credit Memo (Return of Goods)
Thanks,
MatthewHi Gautham,
I checked the IDOC in BD87 tcode and it is saying "Function module not allowed: IDOC_INPUT_ORDRSP".
I gave ORDR as the process code in the inbound parameters of the receiver system partner profile.
In the sender system, I gave me10 as the process code. And there the status is 12, so everything is fine over there.
Vishwa. -
What is the process code for Message type FUNDMA
Hi,
I am sending CO elements to the distributed server using ALE. Can somebody tell me what is the process code for the message type FUNDMA?
Thanks
WilliamCheck entries of table VEDI_TMSG1. This contains Message types and associated Process codes.
Hope this helps.
ashish -
What is the process code for message type FIXEDASSET_CREATE?
Hi all
please tell me that what is the process code for
MESSGAE TYPE = FIXEDASSEt_CREATE,
FUNCTION MODULE = IDOC_INPUT_FIXEDASSET_CREATE,
BASIC TYPE = FIXEDASSET_CREATE01 ?
thanx in advance.......
Edited by: Prachi Sharma on Jan 11, 2008 7:45 AM
Edited by: Prachi Sharma on Jan 11, 2008 8:03 AMHi,
Check the Tcodes WE41 and WE42 for Outbound and Inbound process codes
Check below Tables as well
EDE1T
EDE2T
EDE5T
EDE6T
TEDE5
TEDE6
Regards,
Satish -
Can we create the T-Code for a maintenace view
Hi All,
I have a table for which i create a maintence view . Now we want to create the Transaction code for that.Can it possible..? if yes Plz help me .its very urgent .
Thanks!
Vipin KumarUse TC SE93.
Select option Create TC with Parameter.
Enter TCode.
In it maintain TC as SM30
Click on Skip first screen
Maintain Default Values as
VIEWNAME = <View name>
UPDATE = 'X' -
How to know the process code of an IDOC
Hi All,
If I want to know the process code of a standard SAP IDOC, how do I do it. Is it we42 or any table/transaction, which can show me all the possible process codes for an IDOC.
I need to know this so that I can use this accordingly in my partner profile. ( I do not have any idoc in mind, but its avery general question. How do I know what process code belongs to which IDOC)
Many thanksHi,
U can check using We41 and We42 tcode for both inbound and outbound case. For each process code a function module is attached check the same for required functionality.
WE60 and WE64 transaction.will list the std IDOC in SAP.
chirag -
Process code for Outbound IDOC type MBGMCR03
Hi Friends,
I have a requirement, where in Goods receipt IDOC data from ECC 6.0 needs to be sent to the external system through XI, for that require a process code. Can you all suggest the process code for the outbound IDOC for Goods Receipt.
Thanks in Advance,
Meghna.Hi,
Goods Movement is genarally inbound.
You may have to write your own process code for MBGMCR03.
Regards,
Shakthi. -
What is the Process code for IDoc SISCSO01
Hi all,
I am using 4.6c version.
I am going for an outbound IDoc SISCSO01 for sales Order confirmation.
I want the process code (we41) which suits this IDoc SISCSO01.
Can you please help to get the process code so that my IDoc can be sent succesfully.
Best Regards,
GangoluHi Gangolu,
I don't think there is an outbound process code for IDoc type SISCSO01.
But you can generate the IDoc with this FM <b>MCV_STATISTICS_ALE_OUT_ORDER</b>. But you still need to setup partner profile, distribution model and etc.
Hope this will help.
Regards,
Ferry Lianto
Please reward points if helpful. -
Process code for extended idoc
Hi,
If we are creating an extended idoc, do we have to assign a new process code to it ?
Or will the process code and the associated function module for the basic type work as well for the extended idoc ?Process code will come in to picture when you deal with IDOCS .. you need to assign a code which internally will have a Function module or a Include, that will have entire code to run your bussiness for an IDOC or EDI or ALE.
Process Code is a different name for specific purposes like function module. IDocs are written in this process.
Outbound Process Code - if you are using outbound processing under Message Control, the IDoc is generated in the IDoc Interface. The process code names the relevant function module
Inbound Process Code - names the function module or workflow which reads the IDoc data and transfers the data to the application document.
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b7d6243d711d1893e0000e8323c4f/content.htm
Enter transaction WE30 (ALE->Extension-> IDOC types->Maintain Idoc type)
Type in your name of the extended IDOC type (usually starting with 'Z') and click on the Basic IDoc type, click the create icon.
Click on Create new and enter a description and press enter.
Click on ZIDOCTYPE01 and then on the Create icon.
Enter ZIDOCTYPE as the segment type, click on Segment Editor.
Enter a description for your segment type and create.
Enter a description for your segment, enter each field required in your IDoc and press enter to validate.
Save and generate, press back
To release the segment choose Goto, Release from the menu.
Check the box on the line of your segment.
Save, back and enter.
Your Idoc type structure should be displayed with your new segment.
Save and back.
To release the Idoc type choose Extras, Release type from the menu and Yes.
Reward points if useful. -
Message type and Process Code for 940 IDoc
Hi,
what Message type and Process Code can be used for 940 IDoc when a SHPMNT05 IDoc is being used. We are using SHPADV message, SHPM process code for ASN. Can I use the SHPMNT message type for 940?
thanks,
Kumar.should SD11 be the only process code to be used or can we use SHPM. I guess we can use both for shpmnt05. But how do I know which process code is more suitable for my purpose. is there any place where i can check that info?
Can we link SHPORD message type to a SHPMNT05 IDoc? i think this message type is more suitable.
thanks,
Kumar. -
What is the t.code for convert Idoc into XML schema
Hi all,
How to convert IDOC as XML schema?
there is one T.code is there for convert IDOC into Xml schem ,I forgot that,
plz tell me if anybody knows that t.code. Very Urgent
Thanks in Advance
rambabu.AWE60
Let me know if you need any other help with that.
Best Regards,
Steve Hardeman -
Creating Work Flow Item for inbound Idocs
Hi experts,
I'm just trying to create a work item in sap inbox when inbound idoc fails and gets the status 51 .Documentation says no need for any extra setup,it works with standard SAP tasks & Idoc system process codes which are all preconfigured.
I'm assiginig a user id in the partner profile.I do get a work item when there is syntax error in the inbound idoc segments(like wrong sequence of segments...), but not when idoc fails,due to idoc errors.Am i missing something.Users want a workitem when it fails,so they can reprocee/edit etc.Please help.
Thanks in advance,
RajjThanks for the response.I know this task and i could see a event triggered in the event log,but no work item created in my inbox.What should i do to get the work item in my inbox.should i change this task or assign this to some thing else.
Thanks,
Rajj -
Hi,
We have created a process code for outbound IDOC and assigned an FM to it.In that FM, code is written to generate an IDOC(FM 'master_idoc_distribute').Please let us know how to trigger the outbound IDOC using the process code.Are there any FM or standard programs??
Regards
PrathimaHi Prathima,
For outbond Idoc you have to define the output parameters for the corresponding Partner profile (transaction WE20). Look there that there is a tab called Messages control to specify and aplication, a message class and a process code. Is here where you have to add the process code.
The application/message is responsible of select the data adapted for the FM linked to the process code.
Reward points if helps.
Roger
Maybe you are looking for
-
I recently was able to figure out (I am not tech savvy) how to transfer video and audio from my Macbook to my TV with the DVI to VGA adapter. How to connect it is as far as my knowledge goes on the subject and now I have a problem. My computer froze
-
Compiling FLA and AS files to SWF file using command line
I need to encorporate the .as sources and .fla file, into my build environment, to compile the SWF file. Right I have to Open Flash 8 to perform this and copy the SWF created through the compilation process. Compiling FLA and AS files to SWF file usi
-
CS5 Animation Presets MIA?
In CS5 I don't see the animation presets in the Effects Control Panel. Have they moved elsewhere? Its convenient to see the presets I've created for several effects here rather than searching the Effects and Presets Panel for them.
-
What is the best way to get an FCPHD movie into imovie6? I really need to use an iDVD6 template for my FCPHD movie. I guess another way to ask the question is, How can I import my FCPHD movie into iDVD6? Thanks
-
Can anyone let me know ..what is this all about---urgent
import java.io.InputStream; public class I public I() public static final synchronized String I(int i) int j = i & 0xff;255 if(getResourceAsStream[j] != i) getResourceAsStream[j] = i; if(i < 0) i &= 0xffff;65535 String s = (new String(FYFG, i, FYFG[i