Need email help

After IOS 7 update can't send or forward emails on multiple accounts.

Hey Ed 1571,
I would follow the steps in this article to resolve the email issue:
iOS: Troubleshooting Mail
http://support.apple.com/kb/TS3899
Cheers,
Delgadoh

Similar Messages

I need email help desperately

I just purchased an 8820.
My email setting only allow me to set-up a Work email using an enterprise server.
In my getting started book it shows that there should be a selection for using a personal email address however my phone does not give me this option.
Help Please!!!!

Hello,
The carrier has the option os allowing a Blackberry to do the following:
BES only,
BIS only,
BES and BIS
BB Web access
I havent seen anyone use BES only, but if that is what you have been advised then you wont be able to use the BIS feature.
Can you confirm this with your carrier?
Checked out my Blackberry FAQ's and Links to Needed Articles here
http://darkeen.homelinux.com/index.php/Blackberryfaq

Need email help and/or work around - please :)

Hi all,
I need help with retrieving emails from exchange server. I am the only one who has a blackberry so we do not have any programs installed on the server (for blackberry). I contacted our "IT" guy and he told me that I needed to set up an email on my handheld and direct it to my remote desktops IP address. This makes no sense to me.
What I need to be able to do is receive emails (or copies of them) from my work email to my handheld before the holiday break.
If you have any ideas on how I can do this I would really appreciate it.
Thank you!

Hi and Welcome to the Forums!
You've got two choices:
1) If your firm faces your email via OWA to the internet and does not use ISA, then you can configure BIS email for your BB to work with OWA. Follow these guidelines:
KB03133 How to integrate a Microsoft Outlook Web Access email address with a BlackBerry Internet Service account
It can be tricky to get right, so be patient -- the account name seems to be the trickiest attribute. Also, I was never able to get mine to configure via the device interface to BIS...rather, I had to create BIS credentials at my carrier and then use their web interface from a PC/browser to make it work.
http://www.blackberryfaq.com/index.php/Where_can_I_log_into_my_BIS_account%3F
2) If they don't face OWA to the internet, then you are left with the desktop redirector (which might be what they were directing you toward). You must leave a PC always running that is logged into the internal network and has Outlook open and connected to the Exchange server.
KB15039 How to install BlackBerry Desktop Redirector
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Need email help please??? email header analysis is saying this email is a fake and email is only being delivered "internally"?

Return-path:
<[email protected]>
Received:
from nk11p00mm-smtpin123.mac.com ([17.158.160.105]) by ms10524.mac.com (Oracle Communications Messaging Server 7u4-24.01(7.0.4.24.0) 64bit (built Jan 3 2012)) with ESMTP id <[email protected]> for [email protected]; Wed, 27 Jun 2012 18:42:13 +0000 (GMT)
Original-recipient:
rfc822;[email protected]
Received:
from bz.apple.com ([17.151.62.54]) by nk11p00mm-smtpin123.mac.com (Oracle Communications Messaging Server 7u4-24.01(7.0.4.24.0) 64bit (built Nov 17 2011)) with ESMTP id <[email protected]> for [email protected] (ORCPT [email protected]); Wed, 27 Jun 2012 18:42:10 +0000 (GMT)
X-Proofpoint-Virus-Version:
vendor=fsecure engine=2.50.10432:5.7.7855,1.0.260,0.0.0000 definitions=2012-06-27_05:2012-06-27,2012-06-27,1970-01-01 signatures=0
X-Proofpoint-Spam-Details:
rule=notspam policy=default score=0 spamscore=0 ipscore=0 suspectscore=11 phishscore=0 bulkscore=0 adultscore=0 classifier=spam adjust=0 reason=mlx scancount=1 engine=6.0.2-1203120001 definitions=main-1206270193
MIME-version:
1.0
Content-transfer-encoding:
7BIT
Content-type:
text/plain; CHARSET=US-ASCII
Received:
from lasham.corp.apple.com ([17.34.184.161]) by bz.apple.com (Oracle Communications Messaging Server 7u4-23.01(7.0.4.23.0) 64bit (built Aug 10 2011)) with ESMTP id <[email protected]> for [email protected]; Wed, 27 Jun 2012 11:41:21 -0700 (PDT)
Date-warning:
Date header was inserted by bz.apple.com
Date:
Wed, 27 Jun 2012 11:41:21 -0700 (PDT)
Message-id:
<[email protected]>
From:
[email protected]
To:
[email protected]
Subject:
ReThe iTunes Store support team has received your message - Follow-Up213356706; Follow-up213356706
Your message cannot be delivered to the following recipients:
Recipient address: [email protected]
Reason: Remote SMTP server has rejected address
Diagnostic code: smtp;550 Requested action not taken: mailbox unavailable
Remote system: dns;mx2.hotmail.com (TCP|17.158.185.185|52326|65.55.37.88|25)

Hello,
maybe you can first check if you can "simply" send an email with users SYS, SYSTEM (, SCOTT, ...)...
Users must be allowed to send emails via "ACS", managed by dbms_network_acl_admin. It might be (I've no idea) that even SYS cannot send an email if ACL has not been explicitly configured
Best regards,
Bruno Vroman.

I lost all email 6months and older in mac mail. Need Serious Help!

I lost all email 6 months and older in mac mail. In my in-box as a well as all other folders I created. I expected that the mac email software would keep all email as it did for me in when I used to use Outlook. As well I thought I was covered with the Time Machine I have installed. Well.....The Time Machine that I was aggressively encouraged to buy apparently doesn't back up email. If it does, I must need some secret decoder ring to unlock where it is. I need serious help. I lost months of professional and personal data. I need to fix this immediately and find some way to get my email back. Please help.

In March when I upgraded to Lion and iCloud I also experienced a similar problem (cluster of problems) which was solved by a password reset (conforming to new requirements) for my Apple ID. I'm glad to see that many nice people contributed and your primary problem is fixed. My comment is on your Quicken problem.
Your data inside Quicken 2004 is on borrowed time. In the process of researching personal budgeting apps I found many reports on the web that indicate Intuit as a company is scaling down Quicken (desktop) development and its future attention to the Mac platform will be minimal.
Did you know that Intuit is behind Mint.com? You may be hesitant to put your financial data "in the cloud" and I may be being sheepish, but.. bbaaaa, bbaaaaa, the cloud is where it's going. I know first-hand want a pain in the arse it is to customize an app to your liking. I spent several hours on Mint.com setting up categories and tagging transactions. It's tedious. I didn't look because I wasn't a Quicken user, but perhaps Intuit was nice enough to provide a data conversion path for Mint.com. It is worth a look.
My second suggestion is to scour the web for a hack solution. You can't be the only person who is facing this problem. Quicken was very popular. I just bet someone has posted directions or some code for exporting the Quicken 2004 data and manipulating it for something else.
Good Luck.
Ellee H.

Random new line issue in email attachment using utl_smtp need your help.

Hi
I am getting one problem unable to solve, need your help.
I am creating one csv attachment in email using utl_smtp.
but there are random newline in the attachment value so the csv getting corrupted.
following is the attachment code
FOR C2 IN CUR_VALIDATION_ERROR
             LOOP
               IF CUR_VALIDATION_ERROR%ROWCOUNT = 1 THEN
                 UTL_SMTP.write_data(l_mail_conn,'"LOG DATE","DATA ERROR IDENTIFIER","EMPLOYEE ID","SOURCE SYSTEM","SOURCE FILE ROW","ERROR LEVEL","ERROR MESSAGE"'||CHR(13));
               END IF;
               UTL_SMTP.write_data(l_mail_conn,
                                                 chr(34)||C2.LOG_DT||chr(34)||chr(44)||
                                                 chr(34)||C2.DATA_ERR_ID||chr(34)||chr(44)||
                                                 chr(34)||C2.EMPE_ID||chr(34)||chr(44)||
                                                 chr(34)||C2.SOURCE||chr(34)||chr(44)||
                                                 chr(34)||C2.SOURCE_ROW||chr(34)||chr(44)||
                                                 chr(34)||C2.ERROR_LEVEL||chr(34)||chr(44)||
                                                 chr(34)||C2.ERR_MSG_DSCR||chr(34)||
                                                 CHR(13));
             END LOOP;

Thank you hm, but that is not the case, bcz I found newline character inside a sequence number. Its not possible to have newline character inside a sequence number
"LOG DATE","DATA ERROR IDENTIFIER","EMPLOYEE ID","SOURCE SYSTEM","SOURCE FILE ROW","ERROR LEVEL","ERROR MESSAGE"
"02-MAY-2012","7893660","123","XYZ","44952","WARNING","[02-MAY-12] - The value in field [PHONE]"
"02-MAY-2012","7893663","12
4","XYZ","52382","WARNING","[02-MAY-12] - The value in field [ADDRESS]"

Need some help with: implement email notification on note board within a page layout (javascript)

Dear all,
I have a quite specific issue in which I'm in need of some guidance and help!
Within our SharePoint I have created a custom page layout. This is a simple page to post some content (news) and a standard Note Board is implemented.
Every time a news item is placed, this is done by our communication departement, this page with standard layout is placed as a page in a page library. When there are no comments on that particular item/subject I found a solution to replace the standard SharePoint_no_posts-text
by placing a contenteditor web part in the Page Layout with a reference to a textfile with some javascript in it. This works perfectely.
The only thing left is that I want to automatically send an email to the contact (which is defined when making the news item) everytime someone posts a new comment. Here is where I need some help!
We don't really use mysites so I was wondering if someone could tell how I could do this by for example some code (javascript) which I can implement in the Page Layout.
Can anyone help me?
Thanks in advance,
Gr Matt

Try below code:
function sendMail() {
var link = 'mailto:?subject=insert subject line&body=';
var curntLoc=window.location.href;
link +=escape(curntLoc);
window.location.href = link;
// window.location.href = link;
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/9cfe7884-fc9e-4c7c-a44c-f740d2edcafc/sending-email-using-javascript-in-sharepoint-2010
Also check below:
http://spjsblog.com/2010/06/16/send-email-with-javascript-with-the-help-of-a-workflow-in-a-dedicated-send-email-list/

I'm suddenly in need of help with my Firefox browser (6.0.2)

Hi there,
I'm suddenly in need of help with my Firefox browser (6.0.2)
(OS: I use Windows XP).
When I open up the browser, all I see is a completely blank white screen, with all the toolbars at the top.
I know that my physical connections are fine: I've tested the modem, turned the pc off and on etc. and I can also receive/send emails.
This problem started today, 8th September, 2011 and has never happened before.
Is it a coincidence that Firefox updated itself just before I logged off yesterday evening? Could it be something to do with this particular new update?
I've also noted that just before I "open up" Firefox, I now get a small box saying:
[JAVASCRIPT APPLICATION]
Exc In Ev handl: TypeError: This oRoot.enable is not a function
This has never appeared before - I hope it offers a clue a to what is wrong.
The Browser is not stuck in Safe Mode, by the way.
Obviously, I can't search for any solutions to the problem on the internet, as I can't physically see any websites!
(A friend is sending this query on my behalf from their pc)
Any light you could throw on this confusing problem would be much appreciated. I'd rather not have to uninstall and reinstall Firefox if possible.
If the only option is to uninstall Firefox and reinstall it from your site, then I'm also in trouble (I can't see the internet or make any downloads).
In that case, would you be able to send the .exe file as an attachment to my email address? If so, please let me know and I'll give you further details.
Many thanks in advance.

A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
* https://support.mozilla.com/kb/Server+not+found
* https://support.mozilla.com/kb/Firewalls
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode

I need your help with a decision to use iPhoto. I have been a PC user since the mid 1980's and more recently have used ACDSee to manage my photo images and Photoshop to edit them. I have used ProShow Gold to create slideshows. I am comfortable with my

I need your help with a decision to use iPhoto. I have been a PC user since the mid 1980’s and more recently have used ACDSee to manage my photo images and Photoshop to edit them. I have used ProShow Gold to create slideshows. I am comfortable with my own folder and file naming conventions. I currently have over 23,000 images of which around 60% are scans going back 75 years. Since I keep a copy of the originals, the storage requirements for over 46,000 images is huge. 180GB plus.
I now have a Macbook Pro and will add an iMac when the new models arrive. For my photos, I want to stay with Photoshop which also gives me the Bridge. The only obvious reason to use iPhoto is to take advantage of Faces and the link to iMovie to make slideshows. What am I missing and is using iPhoto worth the effort?
If I choose to use iPhoto, I am not certain whether I need to load the originals and the edited versions. I suspect that just the latter is sufficient. If I set PhotoShop as my external editor, I presume that iPhoto will keep track of all changes moving forward. However, over 23,000 images in iPhoto makes me twitchy and they are appear hidden within iPhoto. In the past, I have experienced syncing problems with, and database errors in, large databases. If I break up the images into a number of projects, I loose the value of Faces reaching back over time.
Some guidance and insight would be appreciated. I have a number of Faces questions which I will save for later.

Bridge and Photoshop is a common file-based management system. (Not sure why you'd have used ACDSEE as well as Bridge.) In any event, it's on the way out. You won't be using it in 5 years time.
Up to this the lack of processing power on your computer left no choice but to organise this way. But file based organisation is as sensible as organising a Shoe Warehouse based on the colour of the boxes. It's also ultimately data-destructive.
Modern systems are Database driven. Files are managed, Images imported, virtual versions, lossless processing and unlimited editing are the way forward.
For a Photographer Photoshop is overkill. It's an enormously powerful app, a staple of the Graphic Designers' trade. A Photographer uses maybe 15% to 20% of its capability.
Apps like iPhoto, Lightroom, Aperture are the way forward - for photographers. There's the 20% of Photoshop that shooters actually use, coupled with management and lossless processing. Pop over to the Aperture or Lightroom forums (on the Adobe site) and one comment shows up over and over again... "Since I started using Aperture/ Lightroom I hardly ever use Photoshop any more..." and if there is a job that these apps can do, then the (much) cheaper Elements will do it.
The change is not easy though, especially if you have a long-standing and well thought out filing system of your own. The first thing I would strongly advise is that you experiment before making any decisions. So I would create a Library, import 300 or 400 shots and play. You might as well do this in iPhoto to begin with - though if you’re a serious hobbyist or a Pro then you'll find yourself looking further afield pretty soon. iPhoto is good for the family snapper, taking shots at birthdays and sharing them with friends and family.
Next: If you're going to successfully use these apps you need to make a leap: Your files are not your Photos.
The illustration I use is as follows: In my iTunes Library I have a file called 'Let_it_Be_The_Beatles.mp3'. So what is that, exactly? It's not the song. The Beatles never wrote an mp3. They wrote a tune and lyrics. They recorded it and a copy of that recording is stored in the mp3 file. So the file is just a container for the recording. That container is designed in a specific way attuned to the characteristics and requirements of the data. Hence, mp3.
Similarly, that Jpeg is not your photo, it's a container designed to hold that kind of data. iPhoto is all about the data and not about the container. So, regardless of where you choose to store the file, iPhoto will manage the photo, edit the photo, add metadata to the Photo but never touch the file. If you choose to export - unless you specifically choose to export the original - iPhoto will export the Photo into a new container - a new file containing the photo.
When you process an image in iPhoto the file is never touched, instead your decisions are recorded in the database. When you view the image then the Master is presented with these decisions applied to it. That's why it's lossless. You can also have multiple versions and waste no disk space because they are all just listings in the database.
These apps replace the Finder (File Browser) for managing your Photos. They become the Go-To app for anything to do with your photos. They replace Bridge too as they become a front-end for Photoshop.
So, want to use a photo for something - Export it. Choose the format, size and quality you want and there it is. If you're emailing, uploading to websites then these apps have a "good enough for most things" version called the Preview - this will be missing some metadata.
So it's a big change from a file-based to Photo-based management, from editing files to processing Photos and it's worth thinking it through before you decide.

Letter/report generation...morgalr, i need your help!!

may i know the details or some sample source code of how to generate the html and import it to MS Word...i need your help urgently...may i have your email to contact u?.....please help, it is urgent!!!

You need not use an applet to write an HTML file, any application file will do fine, actually applications may be prefered due to system security and file creation. Basically the html files are just text files using HTML. Look at any book on HTML and you will be able to get the style and form down along with the syntax.
As for calling MS word, do a search on the web for a product called JPrint. It is done by a company called Neva and they also have a product called "coroutine". It is coroutine that you want. Coroutine is a native level interface for Java to Comm. The docs that come with coroutine should be saficient to get you going on the project.

I've just came on board from Andriod and need massive help with the Contacts application any one out there willing to help the 'noob'?

I had the folks at the store port over all of my contacts from my old
ratty Andriod phone to my new shiny iPhone.
however all 200+ of my contacts sort of "shook" out,
meaning say John Smith, on my old phone,
had in my contacts the following:
John Smith
123 Main St. Anytown, Anystate USA
555-826-4879 home
555-799-4247 cell
[email protected]
johnsmith@facebook
all nice and neat on my andriod but when it ported over
all that information was just scattered all over my contacts sort of like:
john smith, smith john
john smith 123 main st. etc.
johhn smith home 555 etc.
john smith cell 555 etc.
john smith johnsmith@ etc.
etc.
so for all those 200+ contacts in my phone, I've got a zillion of them now...
so I'd like to get this all back in order before I and Siri explode.
I know nothing, and I know even less about outlook and the sort.
But I do know I am in Dire need of help with this... I figured that eveything else
involving iphones and apple in general was supposed to be cake but it seems
like this is the only thing that isn't cake at all... unless, I'm just a right idiot. (which is possible, hence spelling and grammatical issues).

I believe I've tried to sync it with google, but it didn't seem to take
muchless take my calender. it seems to favor my facebook calender
more over my google calender, but Siri seems to be helping me re-write
it...but that's not the game here, it's the contacts. I've tried to export
the cvp (??) list and import it into my iTunes account. However, It only
doubled my issue because it didn't over write my existing contacts.

I Need Dire Help Making a Flash Form

Hello, I need some serious help creating a Flash Form.
I Have used a template from another site with the following
input boxes:
Name: __________
Email: __________
Comments: ____________
However, i had the script working fine, along with its php
script,
when i was trying to add more "text" boxes, i must have
messed the script up somhow.
When I submit that form, the name is send and email, but the
email is blank.. ie, there is no "comments"
here is the code:
on submit button:
on (release) {
// send variables in form movieclip (the textfields)
// to email PHP page which will send the mail
form.loadVariables("email.php", "POST");
sent email messege
onClipEvent(data){
// show welcome screen
_root.nextFrame();
and the php script (mailer.php)
php form email.pho
<?php
* PHP 4.1.0+ version of email script. For more
* information on the mail() function for PHP, see
http://www.php.net/manual/en/function.mail.php
// First, set up some variables to serve you in
// getting an email. This includes the email this is
// sent to (yours) and what the subject of this email
// should be. It's a good idea to choose your own
// subject instead of allowing the user to. This will
// help prevent spam filters from snatching this email
// out from under your nose when something unusual is put.
$sendTo = "[email protected]";
$subject = "My Flash site reply";
// variables are sent to this PHP page through
// the POST method. $_POST is a global associative array
// of variables passed through this method. From that, we
// can get the values sent to this page from Flash and
// assign them to appropriate variables which can be used
// in the PHP mail() function.
// header information not including sendTo and Subject
// these all go in one variable. First, include From:
$headers = "From: " . $_POST["firstName"] ." ".
$_POST["lastname"] . "<" . $_POST["email"] .">\r\n";
// next include a replyto
$headers .= "Reply-To: " . $_POST["email"] . "\r\n";
// often email servers won't allow emails to be sent to
// domains other than their own. The return path here will
// often lift that restriction so, for instance, you could
send
// email to a hotmail account. (hosting provider settings may
vary)
// technically bounced email is supposed to go to the
return-path email
$headers .= "Return-path: " . $_POST["email"];
// now we can add the content of the message to a body
variable
$message = $_POST["message"];
// once the variables have been defined, they can be included
// in the mail function call which will send you an email
mail($sendTo, $subject, $message, $headers);
?>
If anyone can see why the "comments" section is not being
sent?
Also: My original problem was how do you add more text boxes.
I want something like this:
Name:
Address:
Phone:
Mobile:
Email:
Website:
Comments:
Ive spent days and days trying to work out how to first make
a form that actually works, then add more text fields
Ive looked at many basic form tutorials, but they all seem to
only have 3 or 4 text fields.. Name, Email, Comments... etc
I haven't a clue how to edit the script both in action script
and php to add more fields easy.
I really need some help with this, its turning into a
nightmare for me.
I can provide someone with my .fla project file if they care
to take a look at what im doing wrong.
Thanks
Pan
ps. Please note: "$sendTo = "[email protected]";" =
this line i know i must put in my own email.

This is all about timelines. It seems there is a movieclip
named 'form' (or possibly an actionscript object, can't tell). Any
variables created on that timeline are sent.
So you could have your new textfields on another timeline.
Or you could have textfields with no instance name in the
form timeline.
Those are the first two things to look at. Post the FLA and
we can tell you more specifically.

BW error. Need urgent Help( I will give out full points).

We have BW version 3.1 and content 3.3.
We are doing loads to ODS and getting oracle partition error. It gives Oracle partition error ORA-14400. inserted partition key doesn't map to any parititon.
The exception must either be prevented, caught within the procedure
"INSERT_ODS"
(FORM)", or declared in the procedure's RAISING clause.
o prevent the exception, note the following:
atabase error text........: "ORA-14400: inserted partition key does not map to
any partition"
nternal call code.........: "[RSQL/INSR//BIC/B0000401000 ]"
lease check the entries in the system log (Transaction SM21).
ou may able to find an interim solution to the problem
n the SAP note system. If you have access to the note system yourself,
se the following search criteria:
The termination occurred in the ABAP program "GP3WRFMGVS1D8IW16LLGSL4QQKH " in
"INSERT_ODS".
he main program was "SAPMSSY1 ".
he termination occurred in line 41 of the source code of the (Include)
program "GP3WRFMGVS1D8IW16LLGSL4QQKH "
f the source code of program "GP3WRFMGVS1D8IW16LLGSL4QQKH " (when calling the
editor 410).
rocessing was terminated because the exception "CX_SY_OPEN_SQL_DB" occurred in
the
rocedure "INSERT_ODS" "(FORM)" but was not handled locally, not declared in
the
AISING clause of the procedure.
he procedure is in the program "GP3WRFMGVS1D8IW16LLGSL4QQKH ". Its source code
starts in line 21
f the (Include) program "GP3WRFMGVS1D8IW16LLGSL4QQKH ".
Please help me guys. I will award points for good answers.

Dear Sir,
Now I have got the problem like yours (load to ODS and ORACLE partition error ORA-14400 with INSERT_ODS). Tell me, please - did you solve this problem?
Can you recommend me something? What did you do with partitions?
Help me, please - I need urgent help too.
GLEB ([email protected])
P.S. Sorry for my English, I havent got any language practice for a long time.

Need some help with a Macally enclosure and a spare internal drive

Need some help with a Macally enclousure
Posted: Oct 1, 2010 10:55 AM
Reply Email
Aloha:
I have a Macally PHR-S100SUA enclousure that does not recognise,my WD 1001fals hard drive. It has worked just fine with other internal drives, but not this one?
This is a spare internal drive that I am trying to make an external drive to store back ups for a lot of data. But so far I can not get it recognized by the computer. Maybe I need different drivers?
Any suggestions?
Dan Page

Hi-
Drivers aren't typically needed for external enclosures.
Macally has none listed for that enclosure.
The same is true for the WD drive, internal or external; no drivers.
With the exception of high end PM multi drive enclosures, I can't think of any that use drivers.
How is the external connected?
Have you tried different cables, different ports?
Bad/damaged cables are fairly common.
Have you verified connections inside of the enclosure?

In need of help to replicate something and then modify it

I need to recreate an image document that is a bit complex and I need to get some direct feedback regarding how exactly to do this. I'm new to Photoshop. Even though I've watched many of the Photoshop training videos I still need further help for this project. I have a sample of what I need to recreate. Unfortunately what I am trying to replicate has already been grouped or flattened, otherwise it would be easy enough to simply replace and modify each layer as needed. Does this make sense? If a seasoned Photo-shopper is available to assist me briefly I'd be most grateful. I may be contacted at [email protected] Many thanks!

Thank you dj. I thought I was on the Photoshop forum so thanks for alerting me:)

Need email help

Similar Messages

Maybe you are looking for