Need Employee Names and Employee Numbers that charge a WBS Element

Hello,
Does anyone know how I can get a list of employee names and employee numbers that are charging a series of WBS elements?
Thanks

Hi,
You could use transaction CATS_DA with Receiver Account Assignment and enter the WBS element.
Good luck!
Tammy

Similar Messages

Procedure to display the employee name and employee number

Dear All
can any one has the procedure to display the employee name and employee number from per_all_people_f.
Regrads
xyz

can any one has the procedure to display the employee name and employee number from per_all_people_f. https://forums.oracle.com/forums/search.jspa?threadID=&q=per_all_people_f+AND+last_name+AND+employee_number&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein

Difference between .Incumbent Employees name and Employees name

Hello HCMers,
What is the difference between the data coming from the following fields:
1.Incumbent Employees surname p0000-STAT2 & Employee surname PA0001-SNAME
2.Incumbent Employees name p0002-VORNA & Employee Name PA0001-SNAME
Can somebody enlighten me?

Stalin,
PA0000-STAT2 is for Employement status
PA0002-VORNA and NACHN are for FIrst name and last name
PA0001-ENAME is combination of VORNA and NACHN
please go to SE12 put the table name and check the fields and description.
cheers
Ajay

I have a form that has multiple fields but has 5 sections. I have used mail merge to insert information but I can't get Excel to recognize that I need different names and addresses for each section. Please help.

I have a form that has multiple fields but has 5 sections. I have used mail merge to insert information but I can't get Excel to recognize that I need different names and addresses for each section. Please help.

Thanks for your response. I do believe I have the information needed for each form on a separate line in Excel. There is a first name, middle name, last name, city, and zip column. And field is entered on a different line for all the information. I'm really stuck.

HT1296 How can I stop and delete facebook names and phone numbers from my iphone

How can I stop facebook names and phone numbers from being downloaded to my iphone and how can I delete the ones that are already there?

A better way might be
Settings > Facebook > Contacts > turn off.
There are other Facebook settings you might want to leave on. But I also prefer to turn off Calendar there as well to keep every Facebook friends birthday from clogging up my calendar app.

Editing contact's names and tel numbers on the Nok...

I would appreciate if someone could explain to me how I can edit my contacts' names and tel numbers. Have tried without succeeding.
cr.
Solved!
Go to Solution.

-got o to the menu
-then open contacts tap on any contact you want to edit
-tap on the top bar where you fill find the name, you will get a menu--tap on edit or you can click on the avatar display pic
-now you should be able to edit your contacts info
hope this helps
abdoo

ESS: Record working time - employee name and number

Hi All,
I'd like to display the employee number and name in the Record working time screen.
Please help me with the configuration I need to do in IMG or on the portal side.
Any help is greatly appreciated.
Thanks,
Rajit
Points will be awarded.

Hi Siddharth,
On the General Information page, there's a Related Activity iview which contains a link for Record Working Time.
A manager can select an employee in the Data View and then can click on the Record Working Time link which opens up that emp's time sheet.
In such a case, display of employee number and name is very useful and I'm trying to solve this.
In IMG's "Define Field Selection" -> Data entry section, there are employee number and name fields that I set for the data entry profile. But they are not displayed in the portal.
Any ideas are welcome.
Thanks,
Rajit

How do I synchronize a table of employees with and employee update form?

WHAT i AM TRYING TO DO:
Create a page with two areas. The top will contain a sortable, filterable list of employees. The bottom of the page will contain all of the details on a selected employee.
WHAT I HAVE DONE:
1. Created a DEPT_EMPLOYEES view with just some basic department and employee information.
2. Created Entities and View Objects based on the DEPT_EMPLOYEES view and the EMPLOYEES table.
3. Created a View Link between the DeptEmpROView (source) and EmployeesUView (destination)
3. Created a page with a panel splitter an dropped the DeptEmpROView in the top as and ADF Table.
4. Dropped the EmployeeUView on the bottom part of the pages as and ADF Form.
WHAT HAPPENS.
1. When I open the page the list of employees is displayed on top, and the first employee is displayed below.
2. When I click on another row in the table the form below does not change. I had expected it to.
3. If I right-click on a row in the table and select "reload" from the options the page is re-drawn and the bottom form is populated with the data that matches the row I clicked on.
WHAT I WANTED
When you click on an entry, to have the bottom part of the page refreshed to match the selected entry.
QUESTIONS:
1. I thought I had followed all of the steps to prepare a master-detail setup. Do this not work with a table as the master? Or did I miss a step? Or am I using components in a way they were not intended?
2. When I look at the ViewLink I see in the Destination that the where clause :Bind_EmployeeId = EMPLOYEE_ID will be appended to the query. I would then guess that :Bind_EmployeeId is not set when I click on a row. Is there a way to make that happen?
3. I notice in the af:table documentation there is an org.apache.myfaces.trinidad.event.SelectionEvent defined. Can I somehow intercept this and set the bind variable then? If so, how to I tell the form to refresh?
5. Another clue. When I run the page I get some warnings. One is "Reference selectedRow not found" . Double clicking on that gets me to a line selectedRowKeys="#{bindings.DeptEmployeesROView2.collectionModel.selectedRow}"
6. Another warning message "Reference makeCurrent not found" gets me to selectionListener="#{bindings.DeptEmployeesROView2.collectionModel.makeCurrent}"
It sure seems like these last two must have something to do with it.
Any clues would be appreciated.
Edited by: rrp on Jan 3, 2011 12:47 PM

Shay,
Thanks for pointing me to that tutorial. The synchronization is now working.
For anyone else that might find this discussion:
To make it work I selected the af:paneFormLayout that held the EmployeeUView.
In the properties there is a PartialTriggers property in the Behavior section.
I highlighted this property and selected the Edit option.
This allowed me to navigate the component tree and pick the table holding the DeptEmpROView.
That was it. Now clicking on the table changes the details displayed in the form.
There are questions, but they are more followon:
1. The tutorial surrounded the "list table" with a panelCollection. I did not do that. I don't know why or why not to use the panelCollection.
2. The tutorial made a point of setting the ColumnSelection attribute to single for the List table. I did not find this changed the behavior in any way and was wondering why.
3. The tutorial also made a point of changing the ContextMenuSelect for the list table to "clickToEdit".
3a. I did not see how this changed the behavior
3b. Why "clickToEdit" on a read-only table?

Advice on indexing names and phone numbers

Hi!
I currently have a database with 2,6 million records containing names, addresses and phone numbers. I would like to do fast search like: Give me all persons called "Hansen" living on "Elm street". More complex queries like "%sen" living on "%street%" with a phone number like "3888____".
I'm running on a huge Windows 2000 server with Oracle 8.1.7
I currently have indexed the fields with interMedia and substring indexing. Below is my setup.
BEGIN
ctx_ddl.create_preference('tdk_store', 'BASIC_STORAGE');
ctx_ddl.set_attribute('tdk_store','I_TABLE_CLAUSE',
'TABLESPACE tdk_imt STORAGE (INITIAL 4M NEXT 512K PCTINCREASE 0)');
ctx_ddl.set_attribute('tdk_store','K_TABLE_CLAUSE',
'TABLESPACE tdk_imt STORAGE (INITIAL 4M NEXT 512K PCTINCREASE 0)');
ctx_ddl.set_attribute('tdk_store','R_TABLE_CLAUSE',
'TABLESPACE tdk_imt STORAGE (INITIAL 4M NEXT 512K PCTINCREASE 0)');
ctx_ddl.set_attribute('tdk_store','N_TABLE_CLAUSE',
'TABLESPACE tdk_imt STORAGE (INITIAL 4M NEXT 512K PCTINCREASE 0)');
ctx_ddl.set_attribute('tdk_store','I_INDEX_CLAUSE',
'TABLESPACE tdk_imt STORAGE (INITIAL 4M NEXT 512K PCTINCREASE 0)');
ctx_ddl.set_attribute('tdk_store','P_TABLE_CLAUSE',
'TABLESPACE tdk_imt STORAGE (INITIAL 4M NEXT 512K PCTINCREASE 0)');
ctx_ddl.Create_Preference ( 'tdk_wordlist', 'basic_wordlist' );
ctx_ddl.Set_Attribute ( 'tdk_wordlist', 'substring_index', 'true');
end;
CREATE INDEX tdknavn ON tdk ( navn )
INDEXTYPE IS ctxsys.context
parameters ('WORDLIST tdk_wordlist STORAGE tdk_store');
CREATE INDEX tdkadresse ON tdk ( adresse )
INDEXTYPE IS ctxsys.context
parameters ('WORDLIST tdk_wordlist STORAGE tdk_store');
CREATE INDEX tdktelefon ON tdk ( telefon )
INDEXTYPE IS ctxsys.context
parameters ('WORDLIST tdk_wordlist STORAGE tdk_store');
Query like this gives horrible execution times:
SELECT count(*)
FROM tdk
WHERE contains(navn, 'bedsted') > 0
AND contains(adresse, 'gade') > 0
A query like this caused a dump:
SELECT count(*)
FROM tdk
WHERE contains(adresse, '%gade%') > 0
Is this a stupid approach??

Yes it caused a core dump! End-of-file on communication channel.
I just learned about the catsearch function. I read in this forum that is doesn't support wildcards until 9i. So I have to use contains for now.
But... is catsearch faster than contains when you combine to catsearch' in one where clause?
Another question: Is catsearch only faster than contains when you combine it with structured data??

Can I add the file name and page numbers to multiple pdfs automatically?

Hello. Thanks first for taking the time to read this! We are a small non profit hospice. Looking to take a large amount of files and put the patients last name (which is the file name) and a page number on the footer of every page of every document. For example. File Name Smith. Smith 1 Smith 2 Smith 3 etc. However I like to be able to do this to multiple files at once and not have to open each one up.

Go to Advanced - Document Processing - Batch Processing...
Click New Sequence and give it a name.
Now select the sequence you've created, click Edit Sequence, click Select Commands.
Select Execute JavaScript from the left-hand side, and click Add.
Now select it on the right-hand side and click Edit.
Paste the code from my previous post into the window, and click OK twice.
Now, back in the Edit Sequence window, select the folder you want to run the batch on, and the output folder. Be aware that if you choose the same folder, the original files will be overwritten, so you might want to use a different one.
Under Source File Options, deselect everything.
Click OK.
You're now ready to run the batch sequence!

Need User Name and Password for External Firewire new hard drive

In the past, I've worked with two 250 GB PATA drives in my G4, one inside and one in an external Firewire enclosure. I used Carbon Copy Cloner to copy and maintain all system and user files from the internal drive to the external drive. The external drive would boot just fine. These two drives were both partitioned with 74.5 and 158.4 GB partitions with the system files on the smaller.
The internal drive died so I bought a new 500GB drive and installed it in the external enclosure and moved the former external drive inside the G4.
I again used CCC to copy the system and user files to the new 500GB drive.However, I only gave it one 465.8GB partition. I cannot make the external drive complete the boot process. It stops and demands a user name and a password. I've not been able to supply ones which work.
I have remembered and entered the user name and password which were installed when I partitioned the 250 GB drives years ago. The window thinks a few seconds and then shakes back and forth and then clears the data entry boxes so that I can try again.
I do have an Install DVD for Tiger 10.4 (bought from Apple) and have been able to use that to go back and change the root or administrator password and the User password on the computer. That has not solved my problem.
I have read about 25 pages of this forum and not seen any posts that referred to password problems with only the external hard drive. But I've seen some very knowledgeable answers to other people's posts.
Please help.
Gil

Generally, when Mac OS X is asking you for a username and password, it is when you are doing something that requires an Administrator password, such as repairing a hard drive's Directory or making major changes to quasi-System things.
So Carbon Copy Cloner and Disk Utility are likely asking for an Administrator user_id and password. It will not take a simple carriage return as an answer -- the operation will not complete without that Admin authorization.
If you are among the \[estimated five or six] people who actually read the manual and followed the advice to use a non-admin password for your day-to-day computer work, you may not even remember the Admin username and password.
If you have an Installer CD, you can boot to the Installer CD and choose Reset Password off the Installer menu (10.3 and earlier) or the Utilities menu (10.4 and later). There is also an Installer-compatible version of Disk Utility there, and while booted from the CD is an ideal Time to Repair your main Hard Drive, while it is not being used for booting the System.

I need my name and business information at the bottom of all emails

on my old Outlook email I was able to set up the letter page with my name and my business information at the end of the message. I can not find anything like this on Thunderbird. All incoming mail I get has it so why can't I find it here?

It's called your signature. You can set one up for each account under Account Settings.
http://en.flossmanuals.net/thunderbird/composing-messages/
If you need to change between signatures then look for the Signature Switch add-on. This will require you to create signatures as HTML or plain text files.
http://en.flossmanuals.net/thunderbird/signature-switch/

Employee group and Employee Subgroup....

Hi Experts,
I am just learning SAP now.....
I had created employee group(1 Employee) and employee subgroup(3Y executive), and i assigned employee group to subgroup, and i checked in the table T503Z,, even though it is showing an error while creating relationship.... the error is "entry 1 3Y doesnot exist in T503 check your entry" .
please reply me with IMG Path(SPRO)
regards
gosammy

spro>Personnel Management>Personnel Administration>Organizational Data>Organizational Assignment-->Define employee attributes(V_503_C)
I think u missed this table , here u have Activity Status, Employment status, Training Status.Keep the cursor in the relevant feilds and go for f1(help) and fill the data
Best Regards,

Need user name and password to install on new computer...

I just switched from PC to Apple, and when I try to install my Contribute 2.0, I'm being asked for a User Name and Password. Unfortunately, I'm not aware of what the user name and password might be. How can I get them so that I can complete the installation process? Your help is greatly appreciated.
Thanks!

SAURAV KUMAR SINGH wrote:
During Oracle Installation i have given SID : RD1 & Password :admin@1234
... insert BUZZER sound here ...
Using "@" in a password for a DB User is not supported at all (allthough it works).
I did so myself once and I think it was possible to get a connection utilize quotes,
but I do not remember which ones in what way.
Could have been like
sqlplus "sapsr3/admin@1234"
but not very sure any more.
My be toy around with this, but more easy is to use brtools and change the
password to contain only valid oracle letters.
The problem with "@" is, that it delimits the SQLNET Connect identifier.
Volker
Oh, and for executing brtools, do not provide a user at all or only "-u /"
This should do a sysdba connect.
Edited by: Volker Borowski on Jan 30, 2012 7:25 PM

In adobe Captivate I would like the person taking the quiz to write their name and then for that name to appear on the score page. Anyone know how to do that?

I have lessons created using Captivate that my high school students use. I would like the student taking the test to type their name and have it appear on the score page so that they cannot share results.
Otherwise kids can do these for HW and share it with their friends.
thanks

Supposing you don't use a LMS, this could be the work flow:
Add a Text Entry Box in the beginning of the course to ask for the name. If you want to be sure that they really do enter a name, have a look at:
Where is Null? - Captivate blog
Each Text Entry Box has an associated user variable.It is created automatically with the same generic name as the TEB, but you could better use a more significant name for the user variable:
Save Time: Create Associated Variable for Text Entry Box while Defining this TEB - Captivate blog
On the Score slide, insert a text container (caption or shape) in which you insert the user variable, using the X button in the Properties panel of the text container; it will appear between $$ and be replaced by the value of the variable on runtime

Need Employee Names and Employee Numbers that charge a WBS Element

Similar Messages

Maybe you are looking for