Need entering BIOS to setup date after battery empty

Hi, I'm new here.
I worked as technical support where I should maintain many T400.
I have to deal with this issue for T400 type 2767 CTO
The T400 should entering BIOS first and re set date format to actual date after battery empty
Without re set date and time T400 can't be use.
I have checked whether there's damaged in internal BIOS battery,and find no issue in there.
In previous purchase where I got same T400 but different type ( TYPE 2767 RR4) we've never seen an issue like this.
Any solution about my problem
Many thanks.
Regards,
Doni

Thanks, it was very messy I tried to make it simple and installed Win 8.1 OS on the SSD, with up to 1GB/sec r/w transfer rate when all performance functions in Magician were enabled, and the HDD from Seagate has up to 170MB/sec r/w transfer rate, ok, don't want to touch the bios before I have to

Similar Messages

Need Recover earlier iCal Server Data after Failed 3.2.1

After a nightmare updating from 10.6.8 Server to 10.9 Server a couple off months back when we had a hardware failure. We ended up with endless Open Directory errors mostly caused by Apple's botched migration tool and hours spent at the terminal solving these.
We updated to 3.2.1 on Friday night prior to knowing about the Postgres fail it causes. The server ran normally with mail/filesharing/open directory etc. and we opened up the ports to it.
By Saturday morning I started getting text messages from users saying that their calendars were missing. As it was the weekend and little important commercial email had come in, I rolled back the system using the Server Restore Time Machine instructions Restoring OS X Server from a Time Machine backup to a few hours before the update and everything seemed fine. Mail and calendars were there and the mail data definitely corresponded to the time of backup.
Unfortunately on Monday morning I started to get reports from users that while the older calendar events were present, recent data from the last week or so appeared to be missing. I have restored repeatedly trying from many different backups (at 1.5 hrs per try) and the same issue arrises. A lot of these calendar events are crucial to our business.
One I'm super annoyed that Apple let this update out at all. What on earth is going on over there??! I'm seriously considering shifting to a more stable supplier/platform. Two I'm annoyed that I let it go live (But I don't see how I could have check all users individual calendar events) ... and three ... I need a way to test calendar data from lots of Time Machine backups without restoring the whole system each time. I've been up 30+ hours. Apple's instructions don't work. I think I can see where the Calendar Data is stored ( Macintosh HD/Library/Server/Calendar and Contacts).
Is there a way to just recover this data? by means of
Switching Off the Calendar service > Transfer Data > Switch On Calendar Service
I don't mind the terminal.... obviously I'm a Mac user so would prefer GUI say by using CCC.
Please HELP! Apple isn't!
I've been through all of the discussion posts in
Server 3.2.1 update fail
postgreSQL broken fatally with Server 3.2.1
Server 3.2.1 (10.9.5) – Postgres won't start

After a nightmare updating from 10.6.8 Server to 10.9 Server a couple off months back when we had a hardware failure. We ended up with endless Open Directory errors mostly caused by Apple's botched migration tool and hours spent at the terminal solving these.
We updated to 3.2.1 on Friday night prior to knowing about the Postgres fail it causes. The server ran normally with mail/filesharing/open directory etc. and we opened up the ports to it.
By Saturday morning I started getting text messages from users saying that their calendars were missing. As it was the weekend and little important commercial email had come in, I rolled back the system using the Server Restore Time Machine instructions Restoring OS X Server from a Time Machine backup to a few hours before the update and everything seemed fine. Mail and calendars were there and the mail data definitely corresponded to the time of backup.
Unfortunately on Monday morning I started to get reports from users that while the older calendar events were present, recent data from the last week or so appeared to be missing. I have restored repeatedly trying from many different backups (at 1.5 hrs per try) and the same issue arrises. A lot of these calendar events are crucial to our business.
One I'm super annoyed that Apple let this update out at all. What on earth is going on over there??! I'm seriously considering shifting to a more stable supplier/platform. Two I'm annoyed that I let it go live (But I don't see how I could have check all users individual calendar events) ... and three ... I need a way to test calendar data from lots of Time Machine backups without restoring the whole system each time. I've been up 30+ hours. Apple's instructions don't work. I think I can see where the Calendar Data is stored ( Macintosh HD/Library/Server/Calendar and Contacts).
Is there a way to just recover this data? by means of
Switching Off the Calendar service > Transfer Data > Switch On Calendar Service
I don't mind the terminal.... obviously I'm a Mac user so would prefer GUI say by using CCC.
Please HELP! Apple isn't!
I've been through all of the discussion posts in
Server 3.2.1 update fail
postgreSQL broken fatally with Server 3.2.1
Server 3.2.1 (10.9.5) – Postgres won't start

Ipod 2 : All data lost after battery empty, Apple logo! *** is this now!?

I am very upset, i took me countless hours to set up and customize my new ipad 2. Finally i was done, playing "fishfarm" on it, when i noticed the battery was down to 4%. I went to bed, thinking, well the ipad will go to sleep mode soon enough since it was so low on battery power.
Then the shock when i woke up!!! I wanted to charge my ipad, when i noticed the frigging Apple Logo! I assumed the worse when i had to connect it to itunes.
Yes, ALL DATA GONE!! Everything, all apps, data, settings, games, it went back to "out of box" mode. I recently upgraded to new software 4.3.3
This is unacceptable, *** is wrong, did they rush to launch the new ipad when its mainboard wasnt ready? This clearly looks like a major problem, since i dont seem to be the only one having it.
Apple needs to release a fix ASAP! This doesnt happen with Microsoft software, i never lost all my data at once when working with a MS OS.
Anyone else with this problem? Luckily i ordered 2 ipads 2 so when i will pick up the other one on Monday, i am sending this one straight back.

Countless hours? There are only 24 hours in a day.
Backing up the iPad is as simple as attaching the cable to the iPad and your computer and telling the iTunes app on your computer to make a backup. It takes about 5 minutes usually. You should always backup important data on all computer devices.
The iPad 2 was not rushed to market. There is nothing wrong with the iPad 2's logicboard. Mine has worked perfectly from day one over a month ago.
But when a factory assembles millions of electronic devices with dozens of parts from different sources, there may occasionally be a bad one. Call Apple Care and have them walk you through the steps to determine if yours is a lemon or you personally have made a mistake with it, aside from failing to back it up.

T61 at boot everytime enters BIOS (unable to skip BIOS)

I have a T61 with Windows 7 64 bits installed,
T61 did work fine for several months untill last week,
but now when booting immediately after the message to enter BIOS press F1 there is a message entering BIOS setup and then BIOS windows appears, by pressing F10 or ESC Windows 7 starts without reporting problems,
apparently there are no errors reported and I am unable to understand why BIOS setup window appears,
I did several attempts to restore BIOS to default values etc. (hoping to avoid the reported problem) without success,
when booting T61 enters everytime the BIOS Windows and I have to press Esc or F10 to continue normal boot,
How can I restore the original behaviour (i.e. booting without entering BIOS windows) ?
Has someone experienced a similar problem and found a solution ?
Thank you for help.

Have you checked the date and time to make sure they're correct?
They will enter bios if the date isn't set or if the cmos battery is bad, but I've never seen a T61 behave like this otherwise.
ThinkPad W-510 i7-820QM(1.73-3.06GHz) Quad Core... ThinkPad T500, T9900, 8gb SSD...FrankNpad T-60p/61p (X9000 2.8ghz) 8gb SSD ips FlexView...ThinkPad T-61p (T9300 2.5ghz) 8gb ram...Thinkpad X-61 Tablet 4gb ram...ThinkPad A-31 (1.9ghz P4 1.5gb ram)

FMS on Amazon Web Services License. Does it need enter License(Serial Key)?

FMS on Amazon Web Services License. Does it need enter License(Serial Key)?
After Subscribe on adobe.com(Adobe Flash Media Server 4.5 on Amazon Web Services)
I build the Amazon EC2 successfully.
In amazonpayments, the amazon show me an Activation Key.
On Application Activation:
The screen give me following information.
Generate an Amazon Activation Key
An activation key may be required as part of an application's registration process. If your application requires it, follow the steps below:
Step 1: Click on the Generate Key link to generate an activation key for an application.
Step 2: Copy the activation key.
Step 3: Click on Go to Application to access the application.
Step 4: Paste the activation key if and where the application specifies.
But in Adobe Flash Media Administration console, It is missing the License(Serial Key)
Does it need enter License(Serial Key)?
How can I use the Activation Key?

Hi,
This Activation Key is only for identification purposes. In most cases, you will not have to use it. Once you subscribe to FMS on AWS, you are ready to go and use FMS AMI's.
Also, FMS on AWS does NOT require any License or Key. It works on a separate Licensing model.
Thanks!

Cannot enter BIOS setup

I bought a new msi amd motherboard it cannot go into cmos BIOS setup it just says entering setup and it doesnt go any further, I have the pc down to barebones memory cpu and msi board.
I have reset bios CMOS with jumper and battery out several times same problem.
Will flashing the bios fix this problem or could it be that I found the memory is 1.65 volt and should of been 1.5 volt thought everything was recognized and working until windows7 said it completed its installation.
Edited title, correct terminology is BIOS setup not CMOS.

I have the same issue. After having pressed the Del key during booting up - the computer hangs with "Entering Setup" shown in the bottom left of the screen.
* The problem was orignaly found with the 1.0 version of the Bios but remains after upgrading to 1.5. With both versions the Bios was cleared with by switching the JBAT connector.
* Memcheck86 has been executed and reports no error.
* Attempts have been made with the SSD and BR drives detached with no joy
Setup is as follows:
1 MSI E350IA-E45, AMD E-350
Mini-ITX, Hudson M1, DDR3, 1xPCIe(2.0)x16, SATA 6Gb/s, USB 3.0, VGA,
HDMI
1 Crucial DDR3 1066MHz 4GB KIT, CL7,
Kit w/two matched DDR3 2GB, 240pin
1 Corsair SSD Nova Series™ V32, 32GB
SATA2, 2,5", 195MB/70MB/s read/write, incl 2,5" to 3,5" bracket
1 Lite-On DVD±RW/Blu-Ray Reader, IHOS104
SATA, 4x BD-ROM Read, DVD±R: 12x, DVD±RW: 8x, Bulk, BLACK
1 Ace Polly Mini-ITX Svart
Fan: 1x 80mm Back, 150W PSU, mITX, 18 dBA, 2x SATA, 2x USB2.0, HD
Audio

U310 Touch Cannot Enter Bios Setup with NOVO Key

I am trying to enter bios and have tried the following and failed.
1) Through Advance Setup in Windows UEFI Firmware
2) FN F2 / F2
3) NOVO Key
The NOVO gives me an option to Bios Setup but it just boot me back to Windows 8.1.
I need on-site warranty on this laptop in Hong Kong. Is the warranty international?
Solved!
Go to Solution.

Hello,
I don't have an IdeaPad U310 myself, but I'm wondering if you hold down the F12 key after applying power, does that give you a menu from which you can get to the BIOS? That worked for me on a IdeaPad U410.
Regards,
Aryeh Goretsky
I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
Deutsche Community Comunidad en Español Русскоязычное Сообщество

I need a logout script that will erase the standard user account data after logout.

I have a lab of 35 Macbook Pros and I am trying to make it where when the user logouts, it will erase the data after they logout.
I have found several articles about deleting user accounts when they login through AD, but this is not the case.
Any help would be much help!

Then when they are at those system they do not Login and if they do have to enter a password it is whatever it is for the Base user account that is setup. Right?
I'd look at the Mac KB system to see if you can restrict saving to the local HDD but yet allow saving to a thumb drive or not.
To do what you want the system would need to keep track of all files saved from time X to time Y, and those times would be every changing. Not sure you are going to get there from here.
Not sure what you mean by Lab machines. I've worked in and gone to school at a Graphic art school and they have hundreds of Lab Mac's that each student must log into with there own user account when in different classes and when saving any of there work it gets saved on the server so it can be retrieved by them when they log into another system someplace else throughout the school or when using their own computer and connected to the schools network.
I wish you the best of luck with this project.

Help: MY MSI-865GM3-V keeps on restarting when i enter bios setup

Good day.
My computer always restart and it keeps on restarting then an error occurred "CMOS checksum error - defaults loaded" and when i'm trying to enter bios setup it restarts automatically.
CPU specs:
Processor: Intel Pentium duo 2.80GHz
Motheboard: MSI-865GM3-V
Video card: Inno 3d fx 52000-8x 256 MB AGP
Memory: 512 MB DDR
Hard disk: 80 gig MAxtor 7200
i hope someone will help me on this thanks.

Quote from: Jack the Newbie on 15-April-07, 17:27:53
What kind of PSU are you using? List amperage(s) on the +12V-rail(s) also.
Have you tried clearing CMOS? (remove main power plug from PSU first)
When did this problem first appear?
i'm using ATX power supply 500W, I'm not familiar with amperage stuff so i'll just write the list in the PSU
INPUT | 115V ~ 10A 60Hz 230V ~ 5.5A 50Hz
Output | +5V | +12V | -5V | -12V | +3.3V | +5VSB
500W _______________________________________ ____________
MAX | 45A | 18A | 0.5A | 0.8A | 28A | 2A
I tried clearing CMOS in fact i changed the CMOS battery at first it work, I can run the BIOS again and the windows xp is working again then suddenly after 2 hrs. my pc restarts again and it keeps restarting again and i can't go to BIOS setup.
It happen 3 days earlier when i'm just surfing in the internet then suddenly it restarts and since then it keeps on restarting.
I'm using pentium duo core 2.8 GHz processor

URGENT HELP NEEDED!!! No data connectivity after a while, weird errors

I am using T-Mobile's regular prepaid web plan and Wi-Fi just fine, no need for BIS, Rich Email, or BBM (SMS and MMS is just fine). All I ever use are apps that SPECIFICALLY state that they work over standard TCP/IP and Wi-Fi. The problem is, after some time, the apps that one worked over regular data connections and MMS don't connect anymore. Even though the apps said that no BIS is needed, they can't access data. Even RIM's own Facebook app, which claims to work over Wi-Fi (and does) loses data connectivity after a day or so without a full reboot. The only thing that works is the BlackBerry Browser, which still connects to the internet. Along with the apps failing to work, MMS messages also can't be sent.
Rebooting the phone by a battery pull or alt-shift-delete allows the apps and MMS to work, which after a day (sometimes even shorter) stops working again.
Here's what I've done so far:
- Checked and made sure that all permissions for data access
- Checked that my APN settings are correct: epc.tmobile.com
- Checked my Wi-Fi router for connectivity
- Called T-Mobile tech support for help, wiped my phone upon their instruction
- Reinstalled my apps and contacts, T-Mobile sent me new service books
Still the SAME THING with apps and MMS not working after a while. I've narrowed it down to entries in the event log that show up as this, which shows up seconds before my apps and MMS stop working:
a net.rim.hrtRT - PUpI - 9/23 17:06:58
a net.rim.hrtRT - EPdp 0x3 - 9/23 17:06:58
a net.rim.tunnel - Clos-blackberry.net - 9/23 17:06:58
a net.rim.hrtRT - CClG 0x2 - 9/23 17:06:58
W net.rim.hrtRT - XMax - 9/23 17:06:58
W net.rim.hrtRT - XBad - 9/23 17:06:58
E net.rim.mdp - TEma - 9/23 17:06:58
W net.rim.mdp - TDtm - 9/23 17:06:58
i net.rim.mdp - TTex - 9/23 17:06:58
Can any experts or developers tell me what these Warnings and Errors mean? I am pretty sure that whatever "net.rim.mdp" and "net.rim.hrtRT" is doing isn't good.

anyone care to help???
Also, on the 18th I wiped my phone again, and three days later (longest time with no mdp error) the same error occurred in the event log, no internet connectivity afterwards on Wi-Fi or Mobile Network...
The Tunnel Engineering Screen under Multi-WAF Encineering Screens shows the following:
1 VPN <7.105.226.218>
Tunnel ID: 1
Tunnel Type: VPN
Tunnel State: UNEXPECTED ERROR
Tunnal IP Address: 7.105.226.218
2 WLAN <192.168.1.x>
Tunnel ID: 2
Tunnel Type: WLAN
Tunnel State: UNEXPECTED ERROR
Tunnel IP Address: 192.168.1.x
3 3GPP blackberry.net <22.185.134.169>
Tunnel ID: 3
Tunnel Type: 3GPP
Tunnel State: UNEXPECTED ERROR
Tunnel IP Address: 22.185.134.169
4 3GPP epc.tmobile.com <26.203.192.238>
Tunnel ID: 4
Tunnel Type: 3GPP
Tunnel State: UNEXPECTED ERROR (shows OPEN_READY only when browsing webpages)
Tunnel IP Address: 26.203.192.238
Something tells me that the tunnels are being blocked, since closing and recreating them does the same thing. Anyone else have this problem???

IdeaPad U310 touch: Can no longer enter bios after updating to latest version

I flashed to the latest U310 bios (http://download.lenovo.com/consumer/mobiles/65cn99ww.exe). I switched to "legacy boot mode" (from UEFI), in an attempt to workaround a driver issue. Now, I'm no longer able to enter BIOS whatsoever. There are plenty of forum posts by many users hitting the same or similar issues on U310/U410/U330 and similar ideapad products. But the resolutions where they exists are either invalid, or involve flashing to 65cn99ww.exe, which is not possible.
[Environment]
Lenovo IdeaPad U310 touch, Windows 8 (also tried Windows 8.1)
[What I did]
Flashed BIOS using official Lenovo bits (65cn99ww.exe). No errors occured
Enter BIOS afterwards and change to legacy boot mode (from UEFI)
[Problem]
Cannot enter BIOS to view or change any settings.
[Debugging]
Try to enter BIOS by key button sequence.
1. Tried the following combinations during bootup: F2, Fn+Fn, F10, Fn+F10, F1, Fn+F1, 'B', 'N', Fn+'B', Fn+'N', Delete, Esc.
==> No change in behaviour. I tried each many times in case the timing is important.
2. Boot by Novo button. This brings up a menu, which includes an entry to enter BIOS. However, choosing that menu entry boots to Windows
3. Reboot to UEFI firmware settings from Windows (Settings/General/Advanced/UEFI). I can choose to boot to UEFI settings, but ultimately, just boots to Windows 8.
4. Try to reflash BIOS. Fails with error 182: Version less than or equal. So reflash fails
5. Try to reflash old BIOS. Flashing fails
6. Unplug battery from motherboard for 1 minute. No difference in behavior
7. Boot with SATA disconnected.
8. Try various flashing options and alternate ways to flash. Not successful
[Conclusion - BIOS is faulty]
I think this problem can be solved easily with a slightly newer variant of the BIOS being officially released by Lenovo. If someone from Lenovo is reading, can you please open an internal case on this.
Otherwise, I'm open to suggestions from the community. Does anyone know how I can hex edit the bios version #.
Thanks
Solved!
Go to Solution.

All,
When I navigate to the U310T (touch) on the support site, I'm not finding a BIOS update.
It may be that we have removed it. The U310 (non-touch) does still show BIOS 65 available here for Windows 8/8.1 and BIOS 21 on the same page for Windows 7.
Is it possible that you have a touch model and applied the non-touch BIOS?
Mark
ThinkPads: S30, T43, X60t, X1, W700ds, IdeaPad Y710, IdeaCentre: A300, IdeaPad K1
Mark Hopkins
Program Manager, Lenovo Social Media (Services)
twitter @lenovoforums
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

I have a problem with my viber.It has stopped working.I tried reinstalliing it again .On the setup option after entering my phone number and continuing ..it either exists or gives no service message .

I have a problem with my viber.It has stopped working.I tried reinstalling it again .On the setup option after entering my phone number and continuing ..it either exists or gives no service message .My other applications are working fine ..other applications that require internet too are working fine.

Please get in touch with Viber's customer support.

How to enter bios Setup (not the F1 stuff, the splash screen display settings)

So I some how got into a seperate bios setting program by pressing ctrl S when some other bios utility was loading and changed the splash screen display (how long it shows the press enter stuff)
but now I have no idea how to get back into that configruator.
the Manual doesn't mention it, so question, how do I bloody do it?
T430S 2542 btw

Hello
Every time when you switch the notebook ON you can see at the bottom left hand site the short instruction how to enter BIOS settings. In your case you must use F2 button. Please keep it down immediately after switching the notebook ON.
Generally the Toshiba notebooks are delivered with two different BIOS versions (BIOS producer):
- TOSHIBA BIOS: enter using ESC and F1 button
- Phoenix BIOS: enter using F2 button.
According the specification your unit has Phoenix BIOS.
Bye

How to enter Bios Setup Satellite 4030?

I'm searching for Informations how to enter the Bios Setup.

To enter BIOS settings use ESC button.

Date after 3 years...function module needed

Hi
i need to find the date after 3 years from today. please let me know how (function module or class) to do this.
thanks

hi,

Use this function module.
RE_ADD_MONTH_TO_DATE
old date = sy-datum ( any date u want ).
months = 36
U can also use other FM
Date Manipulation
 SD_DATETIME_DIFFERENCE
 DAYS_BETWEEN_TWO_DATES
 MONTHS_BETWEEN_TWO_DATES.
 RE_ADD_MONTH_TO_DATE
 CALCULATE_DATE
 HR_JP_MONTH_BEGIN_END_DATE
 LAST_DAY_OF_MONTHS
 ADD_TIME_TO_DATE
CONVERT_DATE_TO_ALPHA_NUMERIC
PERIOD_AND_DATE_CONVERT_OUTPUT
CONVERSION_EXIT_LDATE_OUTPUT
DATE_TO_DAY
CCM_GO_BACK_MONTHS
SD_DATETIME_DIFFERENCE
Give the difference in Days and Time for 2 dates
FIMA_DAYS_AND_MONTHS_AND_YEARS
Get number of days. Year, Months between two dates.

Mark Helpfull Answers
Regards
Message was edited by: Manoj Gupta
Message was edited by: Manoj Gupta

Need entering BIOS to setup date after battery empty

Similar Messages

Maybe you are looking for