Need export settings for grass valley T2 iDDR

I'm getting ready to send my show over to a cable station. There requiremnts need to match a Grass Valley T2 IDDR playback unit. They support a wide range of files (DVCPROHD, MPEG-2, Quicktime, HQ AVI, Windows media Video HD), but the frame rates listed are 59.94i, 50i, 24P and 23.98P. Most of the 1920x1080 presets are for 29.97. Any suggestions on thye best preset or settings to use? It list HQ AVI as an acceptable format, is that the same as mp4 (H.264?). Here's a link to the file formats supported (page 15): http://www.grassvalley.com/docs/Application_Notes/servers/t2/PRV-4146M_EDIUS_T2_AppNote.pd f

Thread resurrection...
Hmmm. A rather unhelpful, and slightly arrogant, response there from Jim Cookman. I don't read anywhere in the OP about using this setup 'in the field'...
I have an Indigo, and I've been having the same problems as the OP (testing the setup prior to using in the field!).
I've tried capturing the 1394 outputs to a variety of devices, with mixed success.
To a Macbook Pro with FCS:
Basically followed the process outlined by Studio X above.
FCP7 will not recognise the device at all, even with 'non-contollable device' selected. All permutations of settings tried.
However, iMovie is quite happy with the video stream, and displays it OK.
To a W7 laptop with Avid Media Composer & VLC player:
MC will not recognise the device, and will not accept that there is a DV signal there.
However, VLC is quite happy with the video stream, and displays it OK.
To a Sony HVR-M15E deck:
This displays the video stream, but it is broken up with grey blocks all over the screen.
The one thing that links all these is that at no point is any audio present.
Further reseach has uncovered this Indigo FAQ: www.grassvalley.com/rnt/Switcher/Indigo%2015%20-%20IEEE%201394%20Firewire.pdf
that states something that is not mentioned anywhere in the user manual or data sheet: the Indigo 1394 ports do not carry audio, either as inputs or outputs!
Which, combined with the fact that they only seem to be recognised by non-professional applications, renders them pretty useless, IMO.

Similar Messages

Need export settings for 1 hr HDV file from HV20

Hello,
I have imported a 1 hr tape of HDV, and I am trying to export it to Quicktime in order to have it be playable from my hard drive. The iMovie file is 42 gig, so this is impractical.
Any suggestions as to which codec (I have tried H.264 but can't get it to go through.) and which settings in order to produce a roughly 5-10 gig 720p file that looks reasonably well?
Any help would be appreciated
Thanks,
Ken

Compression quality really depends on the type of video that you are trying to compress. If the video is full of motion and noise, it will be very hard to reduce the file size through compression without massive loss. Compression is a trade-off. If you reduce the fame size to 480p, you may increase the quality of the video while reducing the file size versus trying to do the same thing at 720p.

Grass Valley Turbo iDDR Direct Import Formats?

Has anyone successfully figured out a way to export of video file that imports into a Grass Valley Turbo iDDR seemlessly without the Turbo needing to re-format the media itself?
I'm using 8 of these drives on a live production next week and we're looking to reduce our media import times.

Hi Matt, I produce media for corporate events regularly. I just finished a show where we used 3 Grass Valley Turbo iDDR systems exclusively.
The iDDR accepts QuickTime (h.264 codec with the latest DDR software installed), MPEG2, .WMV and a host of other formats. We used MPEG2 (not muxed) for the DDR as it has a max 480 resolution (think of the DDR as DVD player without the disc). The iDDR has ethernet, usb, and firewire inputs as well as CD/DVD for transfer. We used USB with great results as we were projecting on 32 foot screens.
If you are going out of FCPro (which is what I mainly do), I export as a stand-alone Quicktime file (Progressive or Interlace depending on your content) then I use Compresser with a custom setting of MPEG2 (audio/video combined). No problems.
As a side note, contact your AV person who runs the iDDR, they are great at answering questions. I also downloaded the iDDR manual from Grass Valley.
Hope this helps you.
DJ

Grass Valley Turbo iDDR

Has anyone ever used the Grass Valley Turbo iDDR system with Final Cut Pro. If so, how did you transfer the file? What file type?

Hi Matt, I produce media for corporate events regularly. I just finished a show where we used 3 Grass Valley Turbo iDDR systems exclusively.
The iDDR accepts QuickTime (h.264 codec with the latest DDR software installed), MPEG2, .WMV and a host of other formats. We used MPEG2 (not muxed) for the DDR as it has a max 480 resolution (think of the DDR as DVD player without the disc). The iDDR has ethernet, usb, and firewire inputs as well as CD/DVD for transfer. We used USB with great results as we were projecting on 32 foot screens.
If you are going out of FCPro (which is what I mainly do), I export as a stand-alone Quicktime file (Progressive or Interlace depending on your content) then I use Compresser with a custom setting of MPEG2 (audio/video combined). No problems.
As a side note, contact your AV person who runs the iDDR, they are great at answering questions. I also downloaded the iDDR manual from Grass Valley.
Hope this helps you.
DJ

I have lost the export settings for FCP7. How can I get these back?

I accidentally threw a folder in the trash. I got a lot of stuff back using Data Rescue, but not everything.
I have lost the export settings for FCP7. How and Can I get these back? tia

Sorry for the delay in response. It sounds like you have somehow deleted your quicktime ProKit with the codecs by what ever process you were trying to restore you trashed files.
Go to the Apple Menu > System Updates and see if the updater sees a need to install them.
If this doesn't work - it might be
the best thing to do would be to get FCS Remover from Digital Rebellion (free)
http://www.digitalrebellion.com/fcsremover/
and try to remove all traces of your corrupt installation and then do a clean install from your original disks, followed by updates to restore the new ProKit codecs.
If your system has been corrupted by whatever you did, it might be best to wipe the drive and start from scratch - but understood this is not a pleasant choice.
Other posters may have different or better suggestions. The FCS Pro Apps require a lot of files and file structure that may or may not be apparent, and were never drag and drop installable. They always needed to be installed with the proper installer.
MtD

What are the best export settings for a HD video in Premier Pro CS4?

Hi!
   I've been having so much trouble with this issue and it's something that continually frustrates my boss. I have a HD video the settings for it are
FPS 23.98
1920 x 1080, then a few lines down it says 1408 x 792
16 bit,
2 channels
48000 Hz
   What should the settings be when I make a new sequence?
             When I look at it in the window in Premiere Pro I have to contantly 'shrink' the image to fit the window, is that something I should be doing or does it indicate the sequence settings are incorrect?
But more importantly what should the export settings be? I exported a 4 minute long video and the size was 1 GB, I know that's too big.
I need to export it without loosing any quality and export another one that meets the Youtube and Vimeo limits on size.
Vimeo is 500 MB per week, sometimes I upload 4 videos per week. I think Youtube you can only upload 500 MB at a time.
I need to get smaller sizes with loosing the least amount of quality possible AND the best export settings for quality, so I guess I have 3 separate questions-
What are the best sequence settings for HD video?
What are the best export settings for HD without loosing any quality?
What are the best export settings for the size to come out around 500 MB with loosing the least amount of quality possible?
Thank You!
http://forums.adobe.com/thread/713070
On the above thread I used the 5th anwer, and it's going to take about 7 hours to export a 4 minute video :/

It Stands for "Coder Decoder."
Your format is like a container for your video file. Certain containers can hold certain codecs and not others. Other containers can hold other codecs. Sometimes different containers can hold the same codecs.
This might be a bad analogy but I'll give it a try.
A coffe cup (container) can hold pretty much any liquid you drink, where a red solo cup (container) won't hold scolding water. So, the coffe cup would be your container of choice most likely because it has the most options for liquids (codecs). But, you might want a red solo cup for just a single crappy beer at a party (a moderate quality streaming video on the web). In that case, you don't need all the optoins of another container.
In Premiere Pro CC H.264 is a Container and the Codec in one option. This has been streamlined for web distrobution of video to be played in browsers without things like Flash or special players.
Were as if you choose the QuickTime Container there are over 40 codec optoins (at least on my machine with additinal ones installed) but you may run into an issue where your browser doesn't support QuickTime playback.
I would say that your container is for compatability with players and your codec is taken into consideration when looking at the quality of the compression.
Yesteraday I wrote a blog entery on Exporting from Premiere Pro and found that the MPEG-4 codec inside of the QuickTime container gave me much richer colors than the H.264 container/codec option.
I posted the link before but here it is:
http://goo.gl/8GZq4i

Best export settings for video for web

Can anyone give me some advice on the best export settings for a short video that is to be viewed on the web? I have some short, say 2 minute videos that need to be placed on a website and need a reasonable file size. What would the best Format and Preset options be in Premiere? Would it be helpful to utilize After Effects to reduce file size? Thank you in advance to anyone who has some advice!!

For now, it would be on my own website or a clients website. But there may
be another possibility, I have a client that already has some videos
available for viewing on their website, looks like they are YouTube videos
that play on their site, and there is an option to "Watch on YouTube". So I
guess I would love some recommended export settings for a straightforward
video clip on my website, and if I need to explore the YouTube preset in
Premiere, let me know. Thank you, I really appreciate your answers and
help!!

Best Export Settings For Fast/Low-Res QuickTime Movies

I couldn't find a discussion room for FCP 7 so I figured if anybody is proficiant with FCP X, they could help me.
Hello,
I really could use some help with my export settings using FinalCut Pro 7. Most of my shows are no more than 20 minutes and I pretty much know the best QuickTime export settings for uploading to Vimeo, Exposure Room,YouTube...etc. But now I am trying export a lengthy project at 53 minutes.
The footage is mixed and some of it was not converted to ProRes but it plays great and renders fine in the timeline. The sequence settings were picked automatically at 1920x1080 because of the main footage that was brought in.
This upload is for client viewing purposes ONLY so I really don't care about the quality as much as the export speed. As far as what I’ve tried - I am using the H.264 codec. I tried lowering it to NTSC 720x480, then tried 1280x720 HD. I set the compressor lower than medium and the Kbps (?) settings to AUTOMATIC when I typically set it manually, between 3000 and 5000. My audio is set at AAC.
It’s a crappy project because of the way it was frankenstein’d together in the field (I’m just cutting it), but I'm committed now and have a huge deadline. I'm getting a bit nervous because of how many hours it’s taking to export. The client is going to make inevitablec hanges and will want to see those changes quickly again - online.
NOTE: My Compressor does not work and I’ve never needed to use so far so that option is not available.
I could really use could some wisdom today!
Thanks so much to whomever can steer me in the right path.
`Patrick
Message was edited by: prepstein

Try here
https://discussions.apple.com/community/professional_applications/final_cut_stud io

FCE-HD export settings for slideshow

Hey dear specialists,
I need to have a help for the export settings for a slideshow
I am using FCE-HD 4.01 on either MacBookPro with Mountain Lion or on my old G5 with 10.6
Input are slides in JPEG with 15MByte Pixel.
As soon as I am using transition of a picture the result in export in all setting I can choose from FCE, which I found out is very bad, because picture has the interlacing effects at the borders
What can I change to get a good result
Thanks in advance for the feedbacks
Best regards
FJ
N.b.: screenshot abstract >>>> see right hand video lines

Hey Russ,
the video rate of the object does not change when I manipulate on the easy setting
If I import pictures, I do this directly from pircture folder into the BIN, and that should be independently from video input setting
The frame rate should also not be a problem for me here in Germany, because working directly from MAC to flatscreen
I put you a screenshot of the new sequence
The Mov output looks not that bad, even if one looks into detail see picture attached, the steps between one and next frame creates problems
I try also to send you the latest version of a slide transiltion example in iPhone quality ( this can not be attached ) it is a 2MB file. If you like I send you by email.
looks a bit improved vs the morning, but I do not feel confident.
What do you think?
Best regards and will come back tomorrow
FJ

Imovie08 export settings for good quality

I'm using iMovie08 with my Canon HF100 but cannot find the best export settings for my MP4-files. The exported movie needs to run on my PS3 and my macbook. I want to export in 720p and 1080p format, using H.256 and ACC, but I'm not sure what bitrate to use for my movies to get acceptable quality. Tried using 5000k for 720p but that left me with lots of compression artifacts.
Any hints?

For 1080p try unlimited bitrate or a minimum of 16000.

Best export settings for DNxHD?

Hey guys,
I'm working with R3D files (4KHD) in CS6 and need to export them for grading/editing in DNxHD at 1080p. Any tips on the best export settings for this?
Also - is it necessary to downconvert the 4KHD in some way to 1080p before the export process? The files I'm ending up with are a noticeably poorer quality than the original; I'm not sure if this is due to an error I've made during the conversion or if its a natural part of using the codec?
Thanks if you can help!

For now, it would be on my own website or a clients website. But there may
be another possibility, I have a client that already has some videos
available for viewing on their website, looks like they are YouTube videos
that play on their site, and there is an option to "Watch on YouTube". So I
guess I would love some recommended export settings for a straightforward
video clip on my website, and if I need to explore the YouTube preset in
Premiere, let me know. Thank you, I really appreciate your answers and
help!!

Best export settings for Kiosk type presentation.

I have 24 slides that I would like to begin playing automatically and loop.
What is the best export settings in Quicktime.... manual? or would that require a click?
I have set all the transition in and out timings on each slide.
Thank you.

For now, it would be on my own website or a clients website. But there may
be another possibility, I have a client that already has some videos
available for viewing on their website, looks like they are YouTube videos
that play on their site, and there is an option to "Watch on YouTube". So I
guess I would love some recommended export settings for a straightforward
video clip on my website, and if I need to explore the YouTube preset in
Premiere, let me know. Thank you, I really appreciate your answers and
help!!

Best PE7.0 export settings for Youtube HD, Vimeo or Smugmug?

Hi all,
I'm really new to video editing and I can't find any recommendations on the best Premiere Elements 7 export settings for Youtube HD, Vimeo or Smugmug. It seems like most of them want you to upload in 1280x720.
My original source is 1920x1080 30p AVCHD from a Canon HF100. Obviously, I would like to keep it at the same frame rate. There doesn't appear to be a preset in PE7 (or a way at all) to output 1280x720 30 into an MPEG container with H.264 encoding. When I go into the advanced properties of a preset like "H.264 1920x1080i 30" or "MPEG2 1920x1080i 30" and choose 1280x720, I no longer have an option for 29.97 fps - the only options are 23.976 or 24 fps. It seems bad to change this, right?
I see the preset for "HD 720p 30" which appears to be MPEG encoding of the video stream instead of H.264. This seemed to work OK, but I wasn't sure about it, because when I choose it I see in the description a line that says TV Standard: NTSC. A number of web sites indicate that H.264 is preferred, but I don't really understand why.
I also found a way to do H.264 in a Quicktime container. This seemed a little suboptimal because you can't do variable bitrate. When I unselected the "select bitrate" checkbox, it seemed like a quality of 50 yielded a .mov file with a bit rate of 2.87Mb/s, and a quality of 100 yielded a .mov file with a bit rate of 26Mb/s. It is confusing to me how the quality setting affects the bitrate on the quicktime containers.
I'm leaning towards using the "HD 720p 30" preset and working with the bit rate choices, but am open to comments. What do others think?
And on a related question - assuming we choose the "HD 720p 30" preset as a starting point, given the 1GB file restriction at Youtube, it seems to make sense to choose a bitrate that allows both good quality and reasonable file size. I don't know much about whether VBR 1 pass, 2 pass or CBR would be best for this kind of online HD video. Google is a little unhelpful here: http://www.google.com/support/youtube/bin/answer.py?hl=en&answer=132461
This page (http://webvideotechniques.com/123/bigger-and-better-encoding-for-youtube-hd) seems to indicate aiming for a bitrate of 8Mbps with a minimum of 4Mbps, including 2 pass VBR.
So, basically, I'm confused and a little overwhelmed. I think I have solutions that work, but it's hard to tell. What does the greater community think? Thanks.

Thanks very much E Mann, that was a very helpful thread. I think it actually would apply for youtube as well. For other users, here's a direct link to the settings for Premiere Elements:
http://eugenia.gnomefiles.org/2007/12/08/exporting-with-adobe-premiere-in-720p/
Roughly, the answer is:
Quicktime container
Video codec: H.264
Quality: 80 (I used 100 and it just takes longer to encode)
Frame Rate: 29.97 (I guess if you are shooting in 24p, this might be different)
Bitrate: 5000 (I might try 8000)
Audio codec: AAC
Output channels: Stereo
Frequency: 48kHz
Now, my own personal changes to this recipe are:
Quality: 100 - takes longer to encode, no file size difference
Bitrate: 8000
Frequency: 44kHz (recommended by youtube)
One final note is that for Vimeo it appears you may have to try encoding in 29.97 or 23.97 and test to see which you like better. Apparently Vimeo caps fps at 24.
The nice thing about this is that you can get a quality video directly out of Premiere Elements and you don't have to pipe it through another program.

Best export settings for HD video playback on computer?

I have shot my video on 1080p witha DSLR and edited it in premiere pro. I exported the video in .mp4 format.
Now i imported the video in after effects and added loads of animation. I want to export it to the best quality for playback ON COMPUTER ONLY. Which is the best export settings for this purpose.
I rendered it in .avi and my 12 minute video had a size of 55GB after render and did not play smoothly in the computer.. PLEASE HELP WITH THE BEST SETTINGS for the above purpose.

You messed up. You should NOT have rendered MP4 out of Premiere to use in AE. You're adding compression and quality loss in between stages. BAD video person!
The easiest thing to do would be to import your Premiere project in AE. That way it can use the original footage too. If, for some reason, you can't do that, you should render a lossless file out of Premiere. Speaking of lossless files, that's what you rendered out of AE. This page explains your large AE file issue.
Anyway, take that large file you render out of AE into the Adobe Media Encoder and render out your final compressed file. Either H.264 or WMV should work well for playback.

FCE export settings for higher quality video

Hello. I'm a self-schooled newspaper video features producer and relative newcomer to Final Cut Express, shifting from Premium Elements. I've just begun using it to upload videos to my newspaper's finicky web system, which will only accept .flv files of a certain size. My modus operandi has been to export my videos as large .avi files, using Quicktime conversion and DV/DVCPRO/NTSC, with medium quality, with 16 bit sound set at 32 Khz. Then I run that .avi through the Adobe Flash Media Encoder with a frame rate of 15 fps, deinterlacing and resizing the screen to 640 by 480. This procedure (outlined by our former video editor) produces serviceable web quality video (You can see video that results from using these settings at http://wvgazette.com/multimedia). So, two questions: 1) I have created an 8-minute FCE music video for my band and wish to export it at a higher quality (for use on Vimeo) than these newspaper settings. Which of them do I change so that a higher quality video results without waiting all night for a massive file to upload? 2) And wthere might I turn for guidance on better understanding the Sanskrit of FCE video export settings for newbies? Thanks for any help.
Douglas Eye
http://hundredmountain.com

The simplest way to produce good quality video for the internet is:-
1. File>Export Using QT Conversion.
2. The "Format" window should say, "QT Movie".
3. In "Use" select "LAN/Intranet" from the dropdown menu.
4. Click "Save" and when it has finished encoding, upload it.
Do not mess about altering audio settings, frame rates etc.
Using the above settings an 8 minute video would be encoded in around 20 minutes (depending on computer speed) and would be well under 100MB.
Is that too big?
Message was edited by: Ian R. Brown

Need export settings for grass valley T2 iDDR

Similar Messages

Maybe you are looking for