Need extra field in J1I5 for delievry document number.

Dear All,
in J1i5 when updating RG1 i need one extra colomn that is delivery document number
so how to do this'
as its only coming the PGI number i need one extra colomn of delivery document number.
Regards
Subrat

Dear Subu,
As I have already mentioned that it is not possible to add a new column for J1I5 transaction. But You can add a new column for the report which you are downloading. For this you need to do a development for it.
I hope this information is helpful..
Best Regards
MBS

Similar Messages

What is the need of creating partner functions for sales document type.

Hi SAP (SD-GURUS),
Actually we create partner functions before creating customer ex: sold to party, ship to party, bill to party, and payer.
These partner functions are going to be copied into sales order while processing sales order.
Again what is the need of creating partner functions for sales document type.
Thanks&Regards
sreenivas peruru

There are some Partners you could enter at Sales ORder Level. E.g. Sales Person, Employee Responsible, Forwarding Agent, Broker, etc.
Thus these partner Determination need to be carried out at Sales Order Level & not at Customer Master level.
So we have to configure partner Determination for various levels e.g. Customer Master, Sales Order, Delivery level etc...
Hope this helps...
THanks,
Jignesh Mehta

Custom master data for Sales Document Number

Is it possible to create master data for "sales document number" as a custom field and/or table in R/3? We have a need to record the "end user" customer of an order but this data may be updated a long time after the order and sale is complete. IT seems that loading to BW/BI may be simpler if this is treated as document attributes rather than transactional data since no delta will be trigger by changes to this field. Does anyone have experience with this approach?

Hi,
it is possible to create attributes for this InfoObject. Add the Attributes you need in BW. You can use the attributes even if the sales doc is line item dimension of your cube.
On Sourcesystem side you have to create a generic extractor in SBIW. I think a table view on VBAK or VBAP may fullfill your needs. Of course the tables are not the smallest ones but maybe u can use the timestamp to implement a generic delta. Check whether the timestamp is set when the 'end user' is set. Not every change in the sales document leads to an entry in the delta queue of logistic, but the timestamp should be set.
After that replicate the datasource to BI and connect it to the attributes of 0SALES_DOC
I had a similar enhancement at one customer reading the actual transport routes to the sales documents and it worked fine.
Hope that helps
Christoph Vortkamp

How to do Check in the files for the document number?

Hi ,
By using BAPI_DOCUMENT_CHECKIN2 Function module I am uploading the Files for the Document number.
My problem is - After uploading the files to the document number the files are not in check in status.
I want the files to be checked in after uploading the from the FM.
Can anyone tell me what I am missing ? How to do check in the files.
I am passing the following values to FM.
      ls_files-SOURCEDATACARRIER = ls_file-DATA_CARRIER.
      ls_files-WSAPPLICATION     = ls_file-application.
      ls_files-DESCRIPTION       = ls_file-file_desc.
      ls_files-STORAGECATEGORY   = ls_file-category.
      ls_files-DOCFILE           = ls_file-doc_path.
      ls_files-CHECKEDIN         = 'X'.
    CALL FUNCTION 'BAPI_DOCUMENT_CHECKIN2'
      EXPORTING
        DOCUMENTTYPE            = ls_file_data-dokar
        DOCUMENTNUMBER          = ls_file_data-doknr
        DOCUMENTPART            = ls_file_data-doktl
        DOCUMENTVERSION         = ls_file_data-dokvr
      IMPORTING
        RETURN                  = ls_return
      TABLES
        DOCUMENTFILES           = lt_files
    COMPONENTS              =
    DOCUMENTSTRUCTURE       =
I appriciate you response on this.
Thanks in advance.

Any answers for this?
Thanks.

Print pmt advice sheet one by one for giving document number ranges

Hi experts,
i developed payment advice program (used as scripts),just enter only one document number and it will print payment advice
sheet for that document number only.Now my clnt requirement is they want to enter document numbers in the ranges (EX:10 to 20)
so that payment advice sheets for all document ranges should be printed one by one.we can give input as SELECT-OPTIONS.
After that where should i modify so that o/p is come as my clnt requirement.
This report is developed using scripts.Anybody pls help me in this.

In your program retrieve the data into tables (you probably now have as a structure)...or alternatively, write a small program that gets the data, then calls the SAPscript (probably through and ENTRY subroutine).
If you put your data into tables in a program, just loop and do the entire form process for each document...remember to CLEAR all tables/structures used by the SAPScript itself...if not you'll "double up" each time you process a new document.

Need an IDOC EDI STEPS for material document(MB03)

HI ALL,
i need an IDOC for material document. For example, user in SAP make material document (t-code MIGO or MB11), then automatical is downloading outbound IDOC, which contain information about material document.HOW TO PROCESS IT THROUGH EDI .GIVE THE STEPS.

like below you can do your settings
The EDI Configuration required to be done for Transfering IDoc to non SAP System is.
1. First of all, we need to identify the Transaction Data which is required to be Transfered to external System.(Ex: Sales Order Data or Shipment Data or Delivery Related Data).
2. Secondly, Identify the IDoc Type & Message Type. IDoc Type can be found in Transaction WE30 & Message Type Can be explored in Transaction WE81.
3. After that, assign the IDoc Type to Message Type in WE82.
4. Identify the Selection Program (Outbound) which is generally a Function Module in the Form of IDOC_OUTPUT_<Message Type>. Example, if the Message Type is ORDERS, the FM will be IDOC_OUTPUT_ORDERS.
5. Assign the Function Module to a Process Code in WE41 (Process Code for Outbound).
6. Configure Port Definitions in WE21 for which the RFC destinations are to be maintained in Transaction SM59.
7. Maintain Partner Profiles for the Outbound Message Processing in WE20.
8. Last, but not the Least, we need to Focus Mainly on Message Control Configuration which is nothing but maintaining the Output Type for the Outbound IDoc to be Triggered for the Sales Order Application or Delivery Application.
i. In Message Control Configuration, we'll maintain
a. Condition Tables
b. Access Sequences
c. Output Types
ii. To Create the above elements, we can go to SPRO Transaction and do the same depending on the Application Area such as Sales / Shipping / Logistics Execution etc.
iii. For Output Types & Access Sequences, we can go to the Transaction NACE or VK01 in which we'll maintain the Output Types / Access Sequences & Condition Records.
Please note that all the above steps may not be needed if we are using some of the Standard Elements provided by SAP such as Message Type, Process Code, IDoc Type & Selection Program as many of the Standard SAP Applications have their own Elements for different Application Areas.
For example, if you want to send an Order Confirmation IDoc when the Sales Order is saved, you can use the Message Type ORDRSP, IDoc Type ORDERS05 & Selection Program as IDOC_OUTPUT_ORDRSP.
However, Message Control Configuration is the Key Factor and is required for all the Applications as per the Customer's / Client's Requirements.

Serial Number for material document number

Hi All,
Can any body tel me where Serial number stores for particular Material Document number.
When user creation/posting MB11 he will enter serial numbers for material in material document.
I already searched the forum. Unluckily i didn't received any related information.
Thanks in Advance.
NK

I Tried looking standard table which contain Material number, Serial number, Equipment and Material Document but there isn't any.
So I went into SQVI and join two tables, MSEG and OBJK. There I manually draged the MATNR from MSEG Table to OBJK and then selected the fields like Materials Number, Plant, Material Document, Mov Type etc and from other table I selected Material Number plus Serial Number, Equipment (chose your required filters) and then executed and it shows the required records correctly.
Only issue it had was that if you try thousands of records e.g. Materials it went though and brought resukts and some time it dumped. But it fulfilled my needs successfully.

Incremental records for accounting document number

I am facing a problem where I need to get incremental upload. I have to get the Accounting document number posted for an asset. I was thinking of using ANLP-BELNR, forming the AWKEY from it, and then getting the BKPF-BELNR. This way I thought I would get incremental records, as BKPF has CPUDT and CPUTM. But my confusion is:
1) is that date and time the time when the document was posted?
2) this date and time differs from the date(CPUDT) and time(CPUTM) in ANEK table? Does that make any difference?
3) Also I checked CDPOS, and for OBJECTCLAS = BELEG, adn TABNAME = BKPF, there is no entry with Changeid = 'I'. That means the new documnets posted are not being captured in CDPOS?
Please tell me a way how can I get the incremental data?
Thanks a lot,
Nalini

Here you go....
RF_BELEG
Regards,

Table relations between vbrk and bkpf for Accounting Document Number

hello,
i am using 4 tables to get data into my programs.
vbrk,vbrp konv and bkpf.
i want to get belnr from bkpf.i found relation between vbrk and belnr.but in vbrk table belnr's value is initial.
can anybody tell me that how should i relate vbrk and bkpf or how to get Accounting Document Number(belnr) from bkpf for Billing Document(vbeln).
regards,
soniya s.

hi,
chekc this. its working for me.
data : WA_AWKEY LIKE BKPF-AWKEY.
data : WA_BELNR LIKE BKPF-BELNR.
data : LENGTH TYPE I.
*BREAK MTABAP.
LENGTH = STRLEN( IT_VBRK-VBELN ).
if LENGTH = '10' .
MOVE it_vbrk-VBELN TO WA_AWKEY.
SELECT SINGLE BELNR FROM BKPF INTO WA_BELNR
WHERE AWKEY = WA_AWKEY
AND AWTYP = 'VBRK'
and blart = 'RV'.
it_final-acc_doc = WA_BELNR.
CLEAR WA_BELNR .
CLEAR WA_AWKEY .
else.
CONCATENATE '0' it_vbrk-vbeln INTO wa_awkey.
SELECT SINGLE BELNR FROM BKPF INTO WA_BELNR
WHERE AWKEY = WA_AWKEY
AND AWTYP = 'VBRK'
and blart = 'RV'.
it_final-acc_doc = WA_BELNR .
CLEAR WA_BELNR .
CLEAR WA_AWKEY.
endif.

Multiple Vendors for one Document Number in BW

Hello All,
We are getting Multiple Vendors for one document in BW. In R/3, standard table and RSA3, we are able to see correct vendor where as when it is coming into BW it is showing incorrect vendor in PSA and Data Target.
All issues are coming for Process Key 1 only.
*For Example:*
Document: 9400000007
Schedule Line:1
Doc Item: 1
Vendor:
0010019229 - Incorrect Vendor
0010018962 - Correct Vendor
Committed Quantity: 0
Doc Type:
ZNB
ZNPP
Process Key: 1
Not sure how to upload screen shot.
Please suggest.
Thanks,
Vijay

Hi ,
Are you loading for the first time ? If yes have you checked Transaction BF11 settings.
Regards
Rahul Bindroo

Need help abt Purchase order and material document number

1)Is there any releation ship between Purchse order number and material document number?
2) I found aBAPI to get the goods receipt details. That is BAPI_GOODSMVT_GETDETAIL. But it is excepting Material document number and material document year as input parameters.Is there any BAPI to get goods receipt details by using purchase order number?

hi kiran
check this thraed. this gives you relatinship between Purchse order number and material document number
Retrieving Accounting Document number based on PO numbers
BAPI to get goods receipt details by using purchase order number is
BAPI_GOODSMVT_CREATE
thanks
Sachin

Need extra field in S_ALR_87013611 report

Hi There,
I want to modify report S_ALR_87013611. I want to add one column for object currency.
I think S_ALR_87013611 reports using planning layout 1-157 (standard report).
I want to customize this standard report and create variant for users so they can have extra object currency field in report.
can any one suggest me how can i add custom planning layout to S_ALR_87013611 report.
Thanks in Advance.

For you to know that kind of technical information, go to the report transaction code S_ALR_87013611. Here, in the menu goto Environment -> technical information. This will give you all the needed information. In this case, library would be 1VK.
Also, go through this document. It will cover a lot of topics regarding report writer and painter.
http://www.virtuosollc.com/PDF/Get_Reporter.pdf
http://sapdocs.info/wp-content/uploads/2008/11/report-painter.pdf
Shail

Regd:Error in Output determination for Delievry document

Hi,
we have set the output determination ~ Condition record for Ship-to-party Partner function for the delivery document.
The condn is set by using LAVA as the Output type and when we save the delivery doc, output is not getting triggered and when we try to enter the output details manually we get the below error
"Maintain outgoing EDI-connection data for partner XXXX " .
Could you please tell me what settings that I might have missed ?
RGds,
Vasanth.
Edited by: Vasantha Kumar Balasubramani on Jun 25, 2008 3:31 PM

Hi John & Sharath,
I have the partner profile defined in We20 for the Ship-To-Party for whom I am sending the delivery.I have set him as my customer(KU) in partner profile John.
Sharath, I know we have 2 EDI settings at VOE2 and VOE4 but both of them are for inbound messages. Could you please tell me what else EDI settings do i need to do ?
Thanks in advance.
RGds,
Vasanth.

How to add extra fields in xml for BI report

Hi ,
I am trying to create a po print report .
I took oracle standard po print program , Cloned it with output as xml and based on that i am creating the layout for my po print report using xml publisher word doc tool . Now In the oracle po print rdf there is no field like requestor email,phone numbers. I want these two fields on my po print .How can i get those fields .If i see requestor portion in xml its as below
<LIST_G_ONE_REQUESTOR>
<G_ONE_REQUESTOR>
<ONE_REQUESTOR_NAME>FRANK, SCOTT</ONE_REQUESTOR_NAME>
          </G_ONE_REQUESTOR>
</LIST_G_ONE_REQUESTOR>
but I want some thing like
<LIST_G_ONE_REQUESTOR>
<G_ONE_REQUESTOR>
<ONE_REQUESTOR_NAME>FRANK, SCOTT</ONE_REQUESTOR_NAME>
               <ONE_REQUESTOR_PHONE>select 123456</ONE_REQUESTOR_PHONE>
               <ONE_REQUESTOR_FAX>111111111</ONE_REQUESTOR_FAX>
               <ONE_REQUESTOR_EMAIL>[email protected]</ONE_REQUESTOR_EMAIL>
</G_ONE_REQUESTOR>
</LIST_G_ONE_REQUESTOR>
How can I achieve this ...should I make a change in standard RDF for this or is there a way we can pull these details in xml itself ??
Please help .
Regards,
Chandra

I was just think on the same line if we can manage to fetch additional fields like phone number, email address of the requestor by writing a pl/sql in xml itself .But i see that atleast the requestor name should be passed into that query in case there is a way to do it .
Hopefully the change to rdf is the option .
Thanks Srini for prompt response.
--Chandra

In table pa0002 need which fields is used for what countries

Hi
My client is implementing PA for 10 countries
From pa0002 table the client wants a reports where he wants fields and the countries in which thats fields are used ?
How and where can i get this information
Thanks
Raj

Hi Raj,
you can take this from Ad-Hoc qry (SQ01) as a report.

Need extra field in J1I5 for delievry document number.

Similar Messages

Maybe you are looking for