NEED FAST AND BEST JAVAEE 5 SERVER SUPPORT FOR NETBEANS 5.5

I am using j2ee technology for open source development since j2ee 1.4 sdk. The Sun Application Server 8.1 and 8.2 were bit fine to start with netbeans. But Glassfish seem to be too slow to start and deploy. Can anyone tell me the fastest and best performance app server to use with netbeans 5.5.
The computer specs are
PIII 500 MHz
512 100/333 MHz SDRAM

What difference does it make how quick the app server takes to start and deploy?? That's about the most arbitrary criteria for choosing an app. server I've ever heard. Might as well choose based on the colour of the logo!
Seriously, use whichever one you think you're most likely to encounter. Looking at the spec. of your machine, no app. server is going to run particularly fast. Look into getting a faster machine, or at least a second machine of similar specs to run the server on. Poor thing must be exhausted :-)

Similar Messages

  • I bought a movie on iTunes and it keeps stoping the download saying that i need quicktime and my iTunes does not support it. i have already paid for the movie so what do i do to fix this

    i just bought a movie on itunes. everytime the movie starts to download it stops and when i click on it it says that it needs quictime and my itunes does not support it. what do i do?

    How to report an issue with Your iTunes Store purchase

  • I received a Caution message - your computer contains a variety of suspicious programs.  Your system requires immediate checking! The system will perform a fast and free check of your PC for malicious programs.  Check OK

    I received this message this morning in Safari - Caution! Your computer contains a variety of suspicious programs.  Your system requires immediate checking! The system will perform a fast and free check of your PC for malicious programs.  Check OK

    So what did you do?
    If you fell for the scareware, you probably now have malware installed on your Mac.
    Allan

  • Possible to add and persist elements in server config, for use by cons ext?

    I'm considering what will be my obstacles if I try to write a console extension that we would use to view excerpts of an application log file, the application of which is deployed to each server in our domain(s). It doesn't log to the WebLogic server log, it writes it to an external log file (through log4j), and each server (several servers on each box) uses a slightly different path to its log file.
    One issue that I'll have is getting the console extension to know what the path to the log file is. I think the best way, over all, is just to have the user enter the path in the form presented by the console extension. My problem is how to persist that setting, because I'd prefer they didn't have to enter that every time they entered the form.
    Several years ago, I wrote a console extension for WL 8.1.4 which had a similar issue. I ended up simply writing the setting into a properties file inside the extension WAR. This only works (I believe) if the WAR is deployed exploded. I could do that, but I don't like that idea very much.
    What would be nice is if I could "extend" the server config.xml with an additional element in the "Server" element, where I could store this information. Unfortunately, I don't see any support for doing something like that.
    Another alternative I'm considering is whether it's possible to extend the "Summary of Log Files" page in "Diagnostics" with an application-specific log file, but I don't see any way to do that.

    Well, I appreciate the suggestion, but it's not exactly a secret, to me at least. I've used it for human-readable things recently. It occurred to me that that might be my only option, but I certainly wasn't going to assume that. As it seems like this is likely my only option, I guess I can see some interesting conventions for dealing with this. You have to assume that the field could be written to by other code, and that code would have to make the same assumption. I guess I'd have to define a certain XML element as the root of my structure. If I find it, that region between the start and end element is mine to use and modify. If I don't find it, I'll insert my element at the end of the field value.

  • ACS Server - Support for three separate company networks

    I looking into purchasing a ACS 3.3 server to support 3 networks in my organization. Here are my requirements:
    - One ACS server running TACACS and RADIUS supporting three networks
    - each network has a common group of administrators that require various level of access
    - some adminstrators require access to all three networks, some one, some two
    How can I configure each group of users to only have access to their respective networks. What attributes do I use to destinguish the networks for each group of users.
    I think ACS can do this from the reading I have done but need assurance.
    Thanks

    You could see the documenation for the configuation examples here : " target="_blank">www.cisco.com/techsupport/--------> guest---------> product support ----------> Security and Vpns -------------> search for ACS 3.3, check for release notes as well as for configuration examples. You can select view all documents.
    Also, " target="_blank">www.cisco.com/techsupport-----> Select ACS from the drop down menu under Security.

  • Microsoft Project Server Support for SQL Server 2014

    Does anyone know the timeline for Microsoft Project Server to support deployment on SQL Server 2014?   Also, has anyone tried this yet as an unsupported deployment, and if so, have they found any issues?

    "SQL Server 2014 is not yet supported for Project Server 2013", as per the article Hardware
    and software requirements for Project Server 2013: https://technet.microsoft.com/en-us/library/ee683978(v=office.15).aspx updated as on Dec
    09, 2014.
    Cheers! Happy troubleshooting !!! Dinesh S. Rai - MSFT Enterprise Project Management Please click Mark As Answer; if a post solves your problem or Vote As Helpful if a post has been useful to you. This can be beneficial to other community members reading
    the thread.

  • Which domain and forest functional level is supportted for the "Active Directory Resource Pool Synchronization"?

    Hi all,
    I'd like to confirm which Domain/Forest functional levels of Active Directory is supported for "Active Directory Resource Pool Synchronization" in Project Server 2013.
    I guess that 2003 or later is supported, but my customer required reliable sources.
    I googled and searched article at TechNet, but I couldn't find.
    Could anyone inform me the article about that?
    Thank you in advance.
    Kaori.

    Hi Michael and all,
    Anyway I solved this issue.
    I couldn't find article that I desired, so I asked advice to my colleagues and they told that the functional level 2003 or later are supported in their experience.
    In addition, I found these articles about SharePoint sync limitations.
    Members of the domain local group cannot view a Microsoft Office SharePoint Server 2007 Web site
    http://support.microsoft.com/kb/932378/en-us
    SharePoint supportability of Read only Domain controllers
    http://support.microsoft.com/kb/970612

  • Server support for EJB

    Hello,
    I use iPlanet Web Server Enterprise Edition 4.1 Service Pack 11, for my JSP pages i wanna use EJB does this server support EJB.
    Thanx

    Hello,
    I use iPlanet Web Server Enterprise Edition 4.1
    Service Pack 11, for my JSP pages i wanna use EJB
    does this server support EJB.
    ThanxAFAIK, it doesn't... you could use a newer version.

  • Struts support for netbeans

    Hi
    Can some one please guide me through the steps for adding struts support to Netbeans 4.1. If you can give me a link to a tutorial which explains it.
    Thanks

    hey,
    First u have to open the NetBeans IDE then goto Menubar Select File --> select NewProject
    step1) choose project in this step select web and select webapplication then clidk Next
    step2)Name and Location give whatever name u want and the location
    step3)Frameworks: There will be two options with checkboxes in that u have to select struts, click finish

  • Do I need rslinks and a kepware opc server

    To get 12 words from an Allen Bradley 1500, over an ethernet link, from an existing Labview 6.1 application, will I need an RSLinks sever and an OPC server such as Kepware?  Or one or the other

    kayr,
    RSLinx would be straighforward using DataSocket.  We use DataSocket quite often to communicate with AB hardware through RSLinx.  You could also communicate directly to the AB hardware using some of the tools available at this site.
    http://www.automatedsolutions.com/products/commab.asp
    Mark

  • JBoss 4.2.0 does not contain need folders and files inside default server

    Dear,
    In the Virtual Appliance you provided, you will find under the /home/livecycle/jboss-4.2.0/server/default ONLY: log folder and tmp folder.
    When you start jboss like:
    ~jboss4.2.0/bin>./run.sh -c default
    It will give this error:
    Failed to boot JBoss:
    org.jboss.deployment.DeploymentException: url file:/home/livecycle/jboss-4.2.0/server/default/conf/jboss-service.xml could not be opened, does it exist?
    The answer is NO as i explain before. But why? is there a problem in the Virtual Appliance when you prepare the jboss server on it?
    Please let me know

    JBoss in the Virtual Appliance does not have a "default" configuration.  You should not start it with the command "./run.sh -c default".
    Please read the readme.pdf before you use it:
    http://d2x45prcet210j.cloudfront.net/readme.pdf

  • I need advise about setting up a server plan for a community.

    I have the following situation:
    The website has a community with, expected in the fist stage, 100,000 registered members. This community will be first launched in the Netherlands and later worldwide. A member has 25 MB of disk space to store photos or something. You can compare the community with for example hyves (a dutch community site similar to MySpace)
    Besides the community the site will also have a web shop and some information pages about the products that will be sold in the shop. The web shop will not have a large amount of product in store, however the expectation is that it will attract a large amount of customers.
    My question is; what do I need to keep this running smooth (quick page loads) and secure (data loss, back-up servers), and make it easy to expand the server park.
    URLs to the example sites:
    Hyves: www.hyves.nl
    MySpace: www.myspace.com

    >Can you clarify that, because I thought the Xserve RAID is the server for storage?
    The XServe RAID is not a 'server for storage'. It's just an array. In order to provide storage it needs to be connected, via Fiber Channel to a host computer. This is fine if you have one web server, but becomes tricky when you have multiple. unless you're doing some very fancy load balancing, you're likely to want all the content accessible to all web servers at the same time. To do that you typically implement a fiber channel SAN (every host connects to the XServe RAID via a fiber channel connection), or you implement a NAS host where one server is attached to the XServe RAID and it shares the content to other hosts via AFP, NFS or similar.
    This is fine for small installations but my point is that if you grow to hundreds of terabytes of storage, the XServe RAID might not be the best bet. It works well enough at tens of terabytes but there are other considerations when you get very large.
    For example, if you have one XServe host acting as an AFP or NFS 'head', what happens to your site when that server crashes? or needs a Software Update? Your network is going to go down. For high availability networks you might consider a dedicated NAS or SAN infrastructure that has higher redundancy, built-in failover and is designed for very large storage arrays. If you expect to grow there you might be better off starting off with that, rather than starting with an XServe RAID and migrating the data later on.
    Other than that, the rest of it is good for a start, but you need to consider redundancy (what do you do if a server crashes?) and scale (what do you do when you get more traffic than your web server can handle?).
    Typically these problems are solved via load balancers - appliances that sit in front of the application server and dynamically routes connections to whaever machine is best able to respond to the request. These boxes (at least the good ones) don't come cheap, but they're essential if you expect your site to grow past a single server setup.

  • Advice needed on installing CA on Windows Server 2008 for CUPS Calendar Integration

    Hi,
    I am trying to configure CUPS 8.0 to connect to Exchange 2008 to retrieve calendar information as detailed in the integration note at the link below:
    http://www.cisco.com/en/US/docs/voice_ip_comm/cups/8_0/english/integration_notes/ExchInt.html
    I have successfully completed everything up to the section Installing the CA on Windows Server      2008 but am now running into problems.
    When I run the Role Services Wizard I get options to install Certificate Authority and  Certificate Authority Web Enrollment but not  Online Responder.
    Can anyone advise why this would be the case?
    It may or may not be relevant but the server that the customer has told me to install the CA on is a domain controller - could this be the issue?

    A bit more information - below is some of the output generated by the Windows systeminfo cli command.
    Host Name:                 DOMDAT02
    OS Name:                   Microsoft® Windows Server® 2008 Standard
    OS Version:                6.0.6001 Service Pack 1 Build 6001
    OS Manufacturer:           Microsoft Corporation
    OS Configuration:          Primary Domain Controller
    OS Build Type:             Multiprocessor Free
    Registered Owner:          V2C
    Registered Organization:   V2C
    Product ID:                55041-339-2169613-76816
    Original Install Date:     25/01/2009, 18:29:39
    System Boot Time:          11/06/2011, 08:50:34
    System Manufacturer:       VMware, Inc.
    System Model:              VMware Virtual Platform
    System Type:               X86-based PC
    Processor(s):              1 Processor(s) Installed.
                               [01]: x64 Family 6 Model 23 Stepping 10 Genuine ~2494 Mhz
    BIOS Version:              Phoenix Technologies LTD 6.00, 22/09/2009
    Windows Directory:         C:\Windows
    System Directory:          C:\Windows\system32
    Boot Device:               \Device\HarddiskVolume1
    System Locale:             en-gb;English (United Kingdom)
    Input Locale:              en-gb;English (United Kingdom)
    Time Zone:                 (GMT) Greenwich Mean Time : Dublin, Edinburgh,, London
    The server is running Windows Server 2008 Standard and according to the Microsoft doc at the link below this does not support the Online Responder service.
    http://technet.microsoft.com/en-us/library/cc772393(WS.10).aspx
    Could the problem be that I need a server running Windows Server 2008 Enterprise?

  • Need a 32-bit windows home server driver for a cp2025 printer

    I have a Windows Home Server 2011, and multiple Windows XP workstations. I need an XP driver for a CP2025DN printer that I can load onto the WHS 2011, as I want to configure the WHS as a Print Server. The WHS does not recognize (like) the HP Universal drivers, and I do not want to use the Express install download packages. All I need is a driver, like we used to be able to download.
    Anyone have any suggestions/hints?

    those may be helpful...
    http://social.technet.microsoft.com/Forums/en-US/a129f49a-0216-41f0-b190-3efb46fbb8ac/generic-text-only-driver-on-windows-2008-server-r2?forum=winserverprint
    http://blogs.technet.com/b/yongrhee/archive/2009/09/14/how-to-add-64-bit-print-drivers-on-32-bit-windows-server-2003-or-windows-server-2008-print-server.aspx
    Best,
    Howtodo

  • Where is the best place to get support for iPhoto?

    Hello,
    I have an issue that is listed here, in regards to iPhoto being very very slow, this is something that started to happen a while ago and I have been all over trying to find something to resolve this issue.
    6000+ Images, it used to work fine but now it will not Quit, it just hangs. You can send some images via email then it will crash. I have tried all sorts of suggestions from various forums etc, but nothing. Clearing Cache's etc, nothing seems to help.
    Is there any place I can get help from, or should I go directly to Apple for some suggestions?

    William,
    You have come to the right place -iPhoto forum. It's the best place I know to get the help you need from knowledgeable iPhoto users.
    When you say that iPhoto runs slow and quits, that sounds like a memory problem. How much free space do you have on your boot drive? The OS needs about by 15% free and clear disk space to use as virtual memory. An iPhoto library of 6000 can put a real drain on the system.
    Apple recommends closing down other applications if you are getting sluggish response from iPhoto to free up memory.
    Working in iPhoto you can also speed things up dramatically if you close all the rolls in the library source window, except the one you want to work with.
    If you got the zoom set to give you big displays in that source window then minimize the zoom in the organize mode. I photo creates fasting loading thumbnails for browsing through your library. If the zoom is set all the way up, iPhoto has to load the full size file in the library for viewing in the source window. If it has to load all your photos full size in the source window you will get slow response and iPhoto is apt to quit on you
    Peter

Maybe you are looking for