Need Few Jars for RAS Server use!!!

com.crystaldecisions.sdk.occa.infostore.*,
com.crystaldecisions.sdk.plugin.desktop.common.*,
com.crystaldecisions.sdk.framework.*,
com.crystaldecisions.sdk.occa.security.*,
com.crystaldecisions.sdk.exception.SDKException,
com.crystaldecisions.sdk.occa.managedreports.IReportSourceFactory,
java.util.Locale,
com.crystaldecisions.sdk.occa.report.reportsource.IReportSource"
Hi all,
The above mention are few classes available in some jars.
Can anbody help me to find and download those Jars.
Thanks in advance,
Saravanakumar.

Could you not save money and buy a photon for use with your existing server? You could install 2 HBAs and use it in split bus mode.
For true redundancy however, you need 2 servers ideally in 2 locations. ;o)

Similar Messages

Help - Need few JARs for Turnkey installation

A couple of JAR/EAR files missing for turnkey installation.
Can someone copy these JARs from your trial installation and share them across?
Please find the below screenshot showing the list of missing files..
These files can be searched within ES2 installation folder. e.g. C:\Adobe\Adobe LiveCycle ES2\deploy
Thanks,
Nith

Thanks a lot for your reply. I downloaded few packages from Sun freeware website. My issue is when i installed emacs-23.1-sol10-sparc-local.gz which i downloaded from SUN freeware website installs SMCemacs. My required package is SFWemacs. Similar scenarios persist for few more packages. So if you know where i can get the following packages apart from Sun website and Sun freeware website:
IS94de812
ISCbemBui
ISCbemCli
ISCsmMult
ISHelpMul
ISJavaMul
ISLockhar
ISSadeCli
ISSsmMult
ISSunStor
ISa974c6c
IScbembui
IScbemcli
ISd4d0026
ISfb91cb1
ISjavaAss
ISonlineh
ISsadecli
NBSMpre
SFWxaw3d
SFWungif
SFWtop
SFWemacs
SFWgcmn
SFWlexpt
SFWncur
SFWrsync
SMCgtk+
SUNWc2540
SUNWc6130
SUNWc6140
SUNWc6540
SUNWced.2
SUNWdc
SUNWfruip
SUNWpsvrr
SUNWpsvru
SUNWstc
Thanks,
Ram.

Need Weblogic.jar from Weblogic server 9.2

Hi All,
I need weblogic.jar from Weblogic server 9.2.
but i dont want to download & install Weblogic Server 9.2.
Is thereany way i can get only the .jar file?
Thanks & Regards,
BOB

We are having this problem as well. I e-mailed BEA support, but they just said we needed to include the jar in the EAR (this is all supposed to be assembled automatically by the workshop).
For us the issue seems to be the files not being put into the EAR automatically as they are with other types of projects. If we have to manually copy/jar up our class files then we might as well just use notepad and some batch files and skip BEA altogether.
Edited by jmckitt at 09/18/2007 11:04 AM
Edited by jmckitt at 09/18/2007 11:05 AM

Need WebLogic.jar for download

I need WebLogic.jar for development .Kindly let me no from where can i get?

Go to support.oracle.com
Search for document id 763603.1
OR
edelivery.oracle.com and use the BEA WebLogic Media Pack
Did you try creating a wlfullclient.jar?
http://download.oracle.com/docs/cd/E14571_01/web.1111/e13717/jarbuilder.htm#BABCGHFH

Exchange Server 2013 SP1 - Optimize for Single Server Use

Hello,
i've set up Exchange 2013 SP1 with at last CU6 - get exchangeserver says:
AdminDisplayVersion             : Version 15.0 (Build 995.29)
ExchangeVersion                 : 0.1 (8.0.535.0)    - - - funny number ;-) (is this an early version???)
Yes, the annoying 16028 in the application log are running every five minutes, but thats not the main question.
Which services are needed in a SINGLE-SERVER Environment, without DAG and unified messaging?
Can the Self-Checking, Health- and Self-Probing be put down?
These services are started automatic:
   Microsoft Exchange Active Directory Topology
   Microsoft Exchange Anti-spam Update
   Microsoft Exchange DAG Management
   Microsoft Exchange Diagnostics
   Microsoft Exchange EdgeSync
   Microsoft Exchange Frontend Transport
   Microsoft Exchange Health Manager
   Microsoft Exchange Mailbox Assistants
   Microsoft Exchange Mailbox Replication
   Microsoft Exchange Mailbox Transport Delivery
   Microsoft Exchange Mailbox Transport Submission
   Microsoft Exchange Migration Workflow
   Microsoft Exchange Replication
   Microsoft Exchange RPC Client Access
   Microsoft Exchange Search
   Microsoft Exchange Search Host Controller
   Microsoft Exchange Service Host
   Microsoft Exchange Throttling
   Microsoft Exchange Transport
   Microsoft Exchange Transport Log Search
   Microsoft Exchange Unified Messaging
   Microsoft Exchange Unified Messaging Call Router
   Microsoft Exchange-Informationsspeicher
   Microsoft Filtering Management Service
   Microsoft Online Services Sign-in Assistant
And with C:\Program Files\Microsoft\Exchange Server\V15\TransportRoles\data\Queue\mail.que about 512 MBytes size (which may may be a designed default size)...
Have set up about 6 users mailboxes, 3 public folder in a mailbox for public folders. Only for testing purposes sent some (small) mails, no external mails received (only testing receive with 'popcon' for mail delivery to the internal boxes).
The server (2012 R2) is running only in the internal network (yes, with internet connection for updates).
No virus scanners, not third party receive or send connectors, only the 5 default (3 Frontend, 2 Hub) receive Connectors and one Send Connector to our mail provider set up and no user activity (only sometimes from me for testing).
It seems like it's doing only with itself, logging file sizes of above 11 GB (in 4 weeks), with huge amounts of probing, health checking, internal testing, internal updating etc.
Can this logging be set up to a lower level, can services be deactivated (for single server configuration),
the logging volume should be in a useful relation to the mail use of the server, a message for every self test, internal health check etc. in the log-files normally isn't useful, only when problems occur there is a need...
Thanks in advance
Andreas

Between Exchange protocol-based log files, PerfMon .blg files used by Managed Availability, IIS logs, etc., the total footprint can add up quickly and these logs are not purged automatically. You can take a look at this site below and use the powershell
script to clean it up.
http://www.c7solutions.com/2013/04/removing-old-exchange-2013-log-files-html

Implementing Sign on for SRM Server using LDAP

Hi Guys.
I need to implement SSL sign on using LDAP Server.
1. Create the user and sign on with authentication through the LDAP server.
that means there will LDAP authentication first and then
it will logon to SRM (ITS server).
Please let us know if any one of you has done this
Regards
Pushkar Joshi

Pushkar,
Hi. We are intending on doing this through the portal.
If you want to do it directly in SRM then I think you will need to change the logon procedures in BBPSTART (See transaction SICF). I haven't tried it, but you could probably do this through 'L Alternative logon procedure'.
If your SAP database is on Unix and LDAP is on Windows you will probably need a Kerberos authentication. I have managed to read in the information from LDAP (See transaction LDAP), but not authenticate against it. Hence the portal solution.
There is a lot of information on SDN for user authentication (one Blog listed below), but at the end of the day it depends on you release and the technical infrastructure.
/people/wai-hon.lam/blog/2006/04/20/windows-integrated-authentication-via-kerberos-on-an-ldap-data-source
Good luck
Cheers
Rob

Need utilities class for application server file system (i.e. unix etc)

I need to do things to directories and files on the application server.
Is there an SAP class with methods for the application server file system (i.e. unix or whatever) with functionality similiar to what is provided by the methods of CL_GUI_FRONTEND_SERVICES for the presentation server?
Is there a group of SAP functions for this task?

You may have a look at Thomas Jung article: [sdn contribution : ABAP Server Side File Access, by Thomas Jung|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/7a13f367-0401-0010-47ba-eab0b15cf31c]
Moreover, in release 7.10, it could be possible that SAP introduced input and output stream classes (to mimic java classes), so I guess there could be the ones for application server file system.

Need download Link for LYNC SERVER 2010

I Couldn't find the download link for Lync Server 2010.
It redirects to Lync Server 2013 download page.
Could anyone please reply me with Lync Server 2010 download link?
Regards,
Arun

The Lync Server 2010 Trial VHD is located at:
VHD test drive: Lync Server 2010
(Eval) - Part 1 of 2
VHD test drive: Lync Server 2010
(Eval) - Part 2 of 2
Please mark posts as answers/helpful if it answers your question.
Blog
Lync Validator (BETA) - Used to assist in the validation and documentation of Lync Server 2013.

Need XML APIs for finding server status details

Hi,
Can any one help me with the XML API format for finding server status details like Admin State,Avail State,Assoc State,etc.
Thanks and Regards
-Prateek

Here is a very basic example. I pulled out all the extra error trapping / logging. I have been building a module that simplifies most of this .. will produce simple Dumper output for what you are generally looking to do.
The below example will connect to a default UCSM emulator ( http://developer.cisco.com/web/unifiedcomputing/start ) .. just change IP to match. If you want a significantly more detailed information ( hierarchical ) ... change inHierarchical="false" to inHierarchical="true".
Let me know if you want something more specific.
#!/usr/local/bin/perl
use strict;
use warnings;
use Data::Dumper;
use LWP::UserAgent;
use HTTP::Request::Common;
use XML::Simple;
use POSIX;
$Data::Dumper::Purity = 1;
$Data::Dumper::Useqq = 1;
### Configurables
my $ucsm = "10.#.#.#";
my $user = "config";
my $pass = "config";
my $proto = "http";
my $cookie;
my $xml = XML::Simple->new();
my $xml_blade = XML::Simple->new(ForceArray => ['computeBlade']);
## Setup User Agent
my $ContentType = "application/x-www-form-urlencode";
my $userAgent = LWP::UserAgent->new(agent => 'perl post');
$userAgent->timeout(5);
&connect;
my $blades = &getblade;
print Dumper $blades;
&disconnect;
### Subroutines
sub connect {
   my $message = q();
   print 'http://'.$ucsm.'/nuova\n';
   my $response = $userAgent->request(POST $proto.'://'.$ucsm.'/nuova', Content_Type => $ContentType, Content => $message);
   my $xml_ref = $xml->XMLin($response->content);
   $cookie = $xml_ref->{outCookie};
sub getblade {
   my $message = q();
   my $response = $userAgent->request(POST $proto.'://'.$ucsm.'/nuova', Content_Type => $ContentType, Content => $message);
   my $xml_ref = $xml_blade->XMLin($response->content, keyattr => []);
   return $xml_ref->{outConfigs};
sub disconnect {
   my $message = q();
   my $response = $userAgent->request(POST $proto.'://'.$ucsm.'/nuova', Content_Type => $ContentType, Content => $message);

Adaptiv Computing Controller / do i need NFS Mounts for Application Server?

Hello,
i got a question about the Adaptiv Computing Controller.
Do i need NFS Mounts for the Application servers?
Or can i handle this from the SAN too?
Can anybody help me here?
Thanks

http://ww2.cs.fsu.edu/~rosentha/linux/2.6.26.5/docs/DocBook/libata/ch07.html#excatATAbusErr wrote:
ATA bus error means that data corruption occurred during transmission over ATA bus (SATA or PATA). This type of errors can be indicated by
ICRC or ABRT error as described in the section called “ATA/ATAPI device error (non-NCQ / non-CHECK CONDITION)”.
Controller-specific error completion with error information indicating transmission error.
On some controllers, command timeout. In this case, there may be a mechanism to determine that the timeout is due to transmission error.
Unknown/random errors, timeouts and all sorts of weirdities.
As described above, transmission errors can cause wide variety of symptoms ranging from device ICRC error to random device lockup, and, for many cases, there is no way to tell if an error condition is due to transmission error or not; therefore, it's necessary to employ some kind of heuristic when dealing with errors and timeouts. For example, encountering repetitive ABRT errors for known supported command is likely to indicate ATA bus error.
Once it's determined that ATA bus errors have possibly occurred, lowering ATA bus transmission speed is one of actions which may alleviate the problem.
I'd also add; make sure you have good backups when ATA errors are frequent

Source System creation in BI 7.0 for SQL Server using DB Connect

Hi
My requirement is to extract data from SQL Server 2005 to BI 7.0 using DB Connect.
I need to create a SOURCE SYSTEM for that purpose,As i am new to BW i don't know how to start to create a SOURCE SYSTEM.
What are the parameters i require either from Basis team to install or for DB team User ID in SQL (What type of user).
Questions:
1) create a db user with authorization to read this views.......as i created views on tables...do i need authorisation to read table or views
"On BW Server side (If BW server isn't based on SQL Server):
(1) Install SQL Server client and test connection to SQL Server DB.
(2) Install DBSL of SQL server (download lib_dbsl_<num>.sar file from service market and sapcar to BW kernel)"
How can i know on which server our BW System is Based and HOW Install SQL Server client and test connection to SQL Server DB and
Install DBSL of SQL server (download lib_dbsl_<num>.sar file from service market and sapcar to BW kernel
and
how to create Source System to SQL Server on BW
Please update me in details i this is my first Source System Creation in BW
Thanks in advance

go through the link this may be helpful http://msdn.microsoft.com/en-us/library/dd299430.aspx

Can't start NT service for Directory Server using other acc. than LocalSys.

Hi!
I'm using Directory Server 5.1 on a Windows 2000 machine.
I wrote a Plug-In for DS that needs Administrator Access to the NT Domain. So I tried to run the DS-Service as Administrator but the service can not start. I just keeps in status "starting...".
I don't get any error message and the errorlog doesn't contain anything.
Has anyone an idea?
Thanks!
Florian

I forgot to tell one thing: I use SSL, without SSL I do not have this problem. Perhaps it's only the popup I get when starting DS, where I have to enter the certificate password?

Most cost efficient computer for a server using these specs

I want to know how important processing power and internet connection are when talking in terms of using multiple java socket threads that receive messages from various clients at once..
I need a computer that can hold as many of these threads at once while at the same time I dont want it to be to costly.. For example it sounds like a waste to get a 3Gz processor and a super internet connection when I can likely do practically the same amount of threads with maybe a 2Gz processor and the same internet connection..
So how important are each of these factors? Can anyone suggest a machine that would be able to handle plenty of threads for a nice price? I'm looking for a high Thread/dollar ratio :)....
Brian

For chat, maybe not that much. The whole thing is likely to be driven purely by I/O from the users. I mean, the majority of packets sent to/from the thing would be expressing short texts messages typed by humans. Unless you're expecting a large operation, I would expect that this wouldn't be very taxing on your systems. What number of users are you expecting?
Offhand, the thing that glares out of me from your desciption is that you have a single server for pairing people up and (presumably) as a load manager for the chatroom servers. If that server goes down, you're in trouble. If I were you I'd consider adding some redundancy there. Any money might be best spent building up the cluster and making certain that there's plenty of redundancy to go around. For that matter, how many data centers do you have?
It also occurs to me that you might need a lot of disk space, depending on how much logging you want to do and whether you need to do some kind of session recovery after failures. Also are you storing user profiles for matching the people up? Do you have an external database server that you didn't mention? How much redundancy there?
There are services whose job is to hit servers and see what the response time is and whether they're up (they'll page you if they go down). That could be another good use for money, rather than specific hardware upgrades.
Generally it's very difficult to predict this kind of thing in advance, and a good profiling system and an architecture that will let you easily upgrade in response to problems is a good thing. Also lots of testing and load simulation is handy.
Hope this helps.

T61p - Need 2 HDs for virtual server

Hello everyone,
I am looking to configure a T61p with using the option for the media drive bay adapter with a second hard drive. I would like to put two 100GB/7200rpm HDs in the notebook to run both the application and the server at the same time for demos to clients. Is there any other way to configure the T-Series with two hard drives, WITHOUT using an external drive? One of the drives will hold the application and the other will hold SQL or similar. Does anyone see any problems with taking this on?
Any help would be great.
ms

No questions are stupid.
The T61 wasn't around when they wrote the description for the adapter, they tend not to update them.
You can find suitable accessories on this site. Just enter in you type and model number. (hdd adapter should be on about page 4)
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

Need Sample Code for Vendor creation using JAVA API

Hi,
I have a scenario like Vendor creation using Java API.
1.I have Vendors (Main) Table.
2.I have look up tables like Account Group.
3.Also Qualifier table(Phone numbers) too.
Could you please give me the sample code which helps me to create Vendor records using Java API?
I need Code samples which should cover all of the above scenario.
Marks will be given for the relevent answers.
Best Regards
PK Devaraj

Hi Devraj,
I hope the below code might solve all your problem:-
//Adding Qualified field
//Creating empty record in Qualifed table
//Adding No Qualifiers
Record qualified_record = RecordFactory.createEmptyRecord(new TableId(<TableId>));
try {
qualified_record.setFieldValue(new FieldId(<fieldId of NoQualifier), new StringValue(<StringValue>));//Adding No Qualifier
catch (IllegalArgumentException e2) {
// TODO Auto-generated catch block
e2.printStackTrace();
catch (MdmValueTypeException e2) {
// TODO Auto-generated catch block
e2.printStackTrace();
//Creating Record in Qualified table
CreateRecordCommand create_command = new CreateRecordCommand(connections);
create_command.setSession(sessionId);
create_command.setRecord(qualified_record);
try
create_command.execute();
catch(Exception e)
System.out.println(e.toString());
RecordId record_id = create_command.getRecord().getId();
//Adding the new record to Qualifed Lookup value and setting the Yes Qualifiers
QualifiedLookupValue lookup_value = new QualifiedLookupValue();
int link = lookup_value.createQualifiedLink(new QualifiedLinkValue(record_id));
//Adding Yes Qualifiers
lookup_value.setQualifierFieldValue(0 , new FieldId(<FieldID of Yes Qualifier>) , new StringValue(<StringValue>));
//Now adding LookUP values
//Fetch the RecordID of the value selected by user using the following function
public RecordId getRecordID(ConnectionPool connections , String sessionID , String value , String Fieldid , String tableid)
ResultDefinition rsd = new ResultDefinition(new TableId(tableid));
rsd.addSelectField(new FieldId(Fieldid));
StringValue [] val = new StringValue[1];
val[0] = new StringValue(value);
RetrieveRecordsByValueCommand val_command = new RetrieveRecordsByValueCommand(connections);
val_command.setSession(sessionID);
val_command.setResultDefinition(rsd);
val_command.setFieldId(new FieldId(Fieldid));
val_command.setFieldValues(val);
try
 val_command.execute();
catch(Exception e)
RecordResultSet result_set = val_command.getRecords();
RecordId id = null;
if(result_set.getCount()>0)
 for(int i = 0 ; i < result_set.getCount() ; i++)
 id = result_set.getRecord(i).getId();
return id;
//Finally creating the record in Main table
com.sap.mdm.data.Record empty_record = RecordFactory.createEmptyRecord(new TableId("T1"));
try {
 empty_record.setFieldValue(new FieldId(<FieldId of text field in Main table>),new StringValue(<StringValue>));
 empty_record.setFieldValue(new FieldId(<FieldId of lookup field in Main table>), new LookupValue(<RecordID of the value retrieved using the above getRecordID function>));
empty_record.setFieldValue(new FieldId(<FieldId of Qualified field in Main table>), new QualifiedLookupValue(<lookup_value>));//QualifiedLookUp value Retrieved above
} catch (IllegalArgumentException e1) {
// TODO Auto-generated catch block
 e1.printStackTrace();
} catch (MdmValueTypeException e1) {
 // TODO Auto-generated catch block
 e1.printStackTrace();
//Actually creating the record in Main table
CreateRecordCommand create_main_command = new CreateRecordCommand(connections);
create_main_command.setSession(sessionId);
create_main_command.setRecord(empty_record);
try
 create_main_command.execute();
catch(Exception e)
 System.out.println(e.toString());
Thanks
Namrata

Need Few Jars for RAS Server use!!!

Similar Messages

Maybe you are looking for