Need Firefox 4.0 installer for Ubuntu (linux) 10.04

I can't install the new Firefox 4.0 or 4.0.1 in my netbook, 'couse it only supports Ubuntu 10.04 and I want the installer with the ".deb" extention.

Ok I tested a bunch of different Firefoxes on my pos linux box.
'''''Worked with xmodmap:'''''
Vanilla 16.0.2,
Vanilla 16.0B6,
Ubuntu Firefox 16.0.2 (16.0.2+build1-0ubuntu0.10.04.1)
'''''Did Not Work with xmodmap:'''''
Vanilla 17.0.1,
Ubuntu Firefox 17.0.1 (17.0+build2-0ubuntu0.10.04.1)
I have an old Dell Dimension 2400 I plan to use as a replacement for the Sony Vaio when it pops. I've held out as long as possible because it lacks a pci or usb wifi and I really didn't want to run 50 feet of cat5 up a flight of stairs to it. [as i type this i think i remember where a linksys stick for it might be]. Yes I guess it's about time I just do that.
Don't laugh but the reason I held off adding a simple usb keyboard was just lack of space in my tiny bedroom. My setup is on two tray tables side-by-side. Sony Vaio is on left one, my lcd monitor and mouse are on the other. I barely have room to put a cup of coffee on the one with monitor and mouse let alone a full size usb keyboard lol.
Anyway thank you again for all your help.

Similar Messages

  • Adobe livecycle for ubuntu linux

    adobe livecycle for ubuntu linux pls

    This is not officialy supported to run LiveCycle ES/ES2 on any linux distribution but Enterprise Red Hat or SUSE Linux. But this does not mean this is not gonna run on Ubuntu.
    I've tested LiveCycle ES2 using Glassfish and Geronimo as application servers, that are not officially suported, and that works.
    For testing/developing purposes, i think you may use Ubuntu, but if you run in troubles you wont get support from Adobe.
    Do not try any unsupported platform for production environments.

  • Java does not work at all upon using the update manager to update to firefox 3.6.10 for Ubuntu 9.0.4

    OS: Ubuntu 9.0.4
    Browser: Firefox 3.6.10
    upon updating to firefox 3.6.10, java does not work at all.
    websites that use java do not work at all anymore, when they worked just fine before the updating thru update manager. e.g. hulu website cannot play any of the shows.
    i can give the folder of bookmarked pages i tried.
    how to do that on here, i've yet to see if possible.
    i can even give saved text from the terminal concerning certain attempts.
    when i updated thru update manager, it gave some weird java plugin that wasn't there before "The IcedTea Web Browser Plugin IcedTea6 Java Web Browser Plugin (execution of applets on webpages)".
    i uninstalled this as instructed by an answer found in one of the pages i saved, cuz it was conflicting w/another java program the updater said i needed. right now, i don't remember for sure what it was. it perhaps was realplayer flash or Java itself. w/all the hours/days of searching i put in, it's difficult if not downright impossible for me to remember all the specifics of what i tried.
    i've searched throughout many webpages (including many searches on mozilla, ubuntu, java, etc) for instruction in fixing the problem.
    oh, and incidentally, on the Java site, when i try the verify test of Java, firefox pops up with that yellow bar right below the slew of tabbed website windows, giving the statement "additional plugins are required to display all the media on this page. (w/link to) install missing plugins ." which is what i do, go thru the requesting plugin installation. it comes up with, guess what, the IcedTea Java Plugin. i click on the 'next' in the "Plugin Finder Service" box that pops up, & all it gives me is "No plugins were installed. IcedTea ...Plugin failed. and the link 'find out more about plugins or manually find missing plugins'". the link takes me to some of the very things/plugins that wouldn't install in the first place. the Java test failure is a LOL funny, as what plugin it is saying is required (IcedTea) is a recommended alternate program to display the very test in the first place.
    i followed the given instructions on those many searched pages, in every case (barring what i may have just plain missed), but to no avail.
    i've even gone to the point of trying to reinstall the previous 3.5.13 firefox version, from mozilla site. even that wouldn't install.
    i've tried installing Java for my sys direct from it's site. nada.
    now it's time for me to post the problem & perhaps someone will come up with some kind of "dummy" way to fix it.
    until then many sites a regularly use are totally useless to me on this fast puter.
    the only way i can get to use such sites, are two choices: 1. use a dinosaur laptop, which is slower than molasses & cannot handle to any streaming stuff, or 2. use an available internet access puter at the library. but useage for ea person per day is limited to only one hour a day. and one can end up waiting for an hour or more ( in the busiest periods) to even get to use one.
    so, is there anyone at all, who knows any for-sure working fix for this problem?
    thanks muchly :^D
    p.s. i can't pay anybody any money for such help, as is required in certain sites (e.g. Java website), cuz i don't have any.
    i can pay in labor tho, if there is someway to find someone who can physically be at this puter w/me, taking me step-by-step
    sorry for the 20-pg essay. i hope it was all clearly understood. if, not, well, clear communication is always what is needed, ask away.

    Your above posted system details show outdated plugin(s) with known security and stability risks.
    *Shockwave Flash 9.0 r999
    Update the [[Managing the Flash plugin|Flash]] plugin to the latest version.
    *http://www.adobe.com/software/flash/about/
    In Firefox 3.6 and later versions you need the Next-Generation Java™ Plug-In present in Java 6 U10 and later (Linux: libnpjp2.so; Windows: npjp2.dll).
    http://java.com/en/download/faq/firefox_newplugin.xml
    See also http://java.sun.com/javase/6/webnotes/install/jre/manual-plugin-install-linux.html

  • Firefox 3.6.17 on Ubuntu linux not opeing pdf files consistanly

    I run a test server(Ubuntu 10.4 ) with Firefox 3.6.17. I have written several php pages that allow customer to click buttons that pull up pdf files for this or that. If I click on a button, the pdf will usually open once or twice, but after that, I need to shut down fire fox and reopen it in order to get it to pull up the pdf again. I have Adobe reader 9.4 installed and the 9.4 plugin is also install and enabled. This has never been a problem in the past. I have the same code running on my production servers and FF for windows does not have any issues. Chrome has no trouble either

    Update to a supported OS
    This is not an Ubuntu Support forum, but one immediate problem is that you are running unsupported and outdated Ubuntu software. Ubuntu 10.04 was EOL 2013
    * http://en.wikipedia.org/wiki/Ubuntu_versions#Table_of_versions
    * http://fridge.ubuntu.com/2013/03/19/changes-in-ubuntu-releases-decided-by-the-ubuntu-technical-board/
    I just booted an old Ubuntu lucid, and that was using Firefox (Canonical) 20. No doubt that was the last version of Firefox available when support ended.
    You probably will be able to run & install Firefox Mozilla 27 on that if you tried, but I have not tried that myself.
    I am posting this from Ubuntu 12.04 precise using Firefox(Canonical) 28 and also have various Firefox Mozilla versions installed.
    You appear to have posted from a Windows7 64 bit computer. If you use an up to date Ubuntu your distro will have an up to date matching Firefox Canonical. You will have a choiceof 32 or64 bit Ubuntu. If however you happen to go down the route of Mozilla Firefox note the default download offerings are 32bit builds, although 64bit are available as ftp downloads.
    If you follow the instructions in
    *[[install firefox on linux]]
    ** '''edit''' and https://help.ubuntu.com/community/FirefoxNewVersion/MozillaBuilds
    that is an additional version. It does not remove your distro install of Firefox.
    Whatever route you take remember to backup the Firefox profile and put it somewhere safe. Just in case anything goes wrong. (Remember you probably have an encrypted Home Directory/Partition ) It is now possible to upgrade automatically no need to do it manually
    * https://help.ubuntu.com/community/PreciseUpgrades

  • I NEED Firefox 3.6.25 for my MacBook Pro. The ftp site is gone. How can I get it? I can't upgrade because of my processor.

    The night that Firefox apparently stopped distributing Firefox for Mac 3.6.25, I had a computer crash that corrupted my copy of 3.6.25. I tried to go to the FTP site to get another copy to reload (using Safari) and the FTP site is apparently gone and Firefox will not let me download that version of Firefox. I'm limping along on Safari and can't update even my corrupted version of 3.6.25 because my processor won't support further updates. I NEED 3.6.25! Is there anyplace that I can get it? What can I do? My corrupted version of Firefox 3.6.25 doesn't work correctly. It opens improperly and doesn't work when it does open.

    Hi,
    You can try the latest in the [https://www.mozilla.org/en-US/firefox/all-older.html 3.6 series] which is still supported.

  • Oracle 11g Express for Ubuntu Linux

    Just like Oracle provided express edition for linux for 10g, will there be an easy to install express edition of 11g for linux? I mean via apt-get or debs or synaptic. Of course, synaptic being the easiest I have EVER seen oracle install on linux.
    I want to try Linux as a developer, but installing 11g on linux the normal way is a pain. I do not want to spend days trying to install 11g on linux. I want to get busy doing something with 11g such as write queries and design databases.

    Yes, sigh.
    If only people could write what they mean!My apologies for not being adept at the language. But we have both been wrangling with my lack of
    language skills for years, so we should be used to it by now.
    >
    Are you saying EE when you mean XE, perhaps?No. I meant EE using synaptic. Which does not exist. Which may explain why some people think the installation is difficult. The tools they have learned are not there and the fight to find or learn the alternatives is not pleasant.
    And even the simple stuff may seem. difficult. Some people, including modern developers with IDEs, are very concerned about the difficulties of editing in Linux. In my Oracle on Linux courses, I see grown men near tears when I tell them to edit sysctl.conf ... you should see the visible relief when I describe gedit or kate.
    You have been doing the baseline install for years - Back in the Red Hat 9 days, I'd been handing out the HJR Linux install (with your written permission) in my classes for years. So I expect us to get it done in a short time. Cookie-cutter boot, thru install Linux & Oracle, to tnsping shouldn't take us (you and me) more than 1.5-2.5 hours. (Especially if all we want is a basic data dump.)
    But ... reading the docco, translating the steps into a manual sequence, and finding and running the synaptic equivalent to the documented rpm commands - aka a synaptic install - can take days. Heck, just reading the docco to get it straight under a certified distro can take days.
    After that, OUI is simple, and (if the pre-reqs are clean) nearly fool-proof.
    BTW - why do we have to fight with the pre-reqs? Why can there not be more variants of the SUSE-supplied orarun.rpm to do all that manual stuff?

  • OWB Installation In Ubuntu Linux

    Hello,
    I have installed Linux flavor Ubuntu(9.1) version.
    Could it be possible to install OWB 10g R2 on Ubuntu?
    If not which are the supported Linux flavors?
    Regards

    Yes, it'ts possible. I just installed OWB 11gR2 on Ubuntu 9.1. Follow the installation instructions in the oracale manual.
    Regards,
    Detlef

  • Need help with drive installation for K9N2 SLI Platinum

     
    Hi
    I am new to the forum and to MSI
    This is my 6th computer build and first time using SATA and PCIe
    My hardware includes:
    •   MSI K9N2 SLI Platinum Motherboard
    •   Corsair XMS2 TWIN2X4096-6400C5
    •   GeForce 9800 GT 512MB GDDR3
    •   AMD Phenom X4 9850 Quad Core Processor, Black Edition 2.5GHz
                    4MB Cache 2000MHz [4000 MT/s] FSB
    •   Thermaltake  Ruby Orb Aluminum Core CPU Cooler
    •   UltraX3 850 Watt ATX Modular Power Supply
    •   [1] Western Digital 200MB7200 ATA133
    •   [1] Maxtor 80MB ATA133 Drive  [Not connected yet]
    •   [1] Western Digital 500GB 7200RPM 16MB SATA II HARD DRIVE
    •   [2] Seagate 7200.11 ST3500320AS 500GB SATA Hard Drives With 32 MB Cache   
                    [Not  connected]
    •   LG DVD-RW
    •   Toshiba DVD-ROM
    •   AMI Bios
    •   Antec Full Tower case
    The board set up fine, but I can’t figure out how to install my drives. The MSI directions are the worse I’ve ever seen, or should I say non-existent. They don’t even describe the bios entries… I am familiar with the bios, but don’t know all the settings for the board. I set the time and date and had to rearrange my drive placement on the board to have my 2 DVD drives show up on the secondary IDE Channel instead of the primary IDE.  The Western Digital 200MB7200 ATA133 is on the primary master IDE. I’m old fashioned so I still use FDISK to erase the old OS and partition the drive… I couldn’t see my SATA drive in FDISK even though I could see it in the bios. Now I want my Western Digital 500GB 7200RPM 16MB SATA II HARD DRIVE to be the system drive and the Western Digital 200MB7200 ATA133 to be a slave drive. My previous boards had raid but I just used them as additional slave drives.
    My goals: I want to have redundancy for my personal audio/video and my work. I will use the 2 Seagate 7200.11 ST3500320AS 500GB SATA drives for that.
    I also want 2 additional drives not purchased yet for my other data storage needs and for games
    My questions are:
    Can I use the SATA drive as the system drive if a drive is connected to the primary IDE?
    How do I set up Raid on this board? I actually want to use its capabilities this time.
    Does this board present any special problems with dual booting XP sp2 and Vista 64bit.
    If I put another set of Corsair XMS2 TWIN2X4096-6400C5 in anticipation of installing Vista 64bit will this cause a problem other than windows XP not seeing the additional memory.
    Is there additional documentation for this board somewhere?
    Please help…I have been working on this thing for 4 days straight. My last build took 2 hours not including software installation. Hope I stated everything you need to know. Thanks in advance  

    Hello!
    Advice no. 1 will be not to have everything connected at once. Have the chosen SATA and one of the DVD:s connected and install Windows. (Windows can only boot from bootable devices. It "jumps" all un-bootable.) Once you have a successful boot and happy with it, remove other things from the boot-sequence.
    Eh, some of your questions suggest you don't have the full manual, but a multi-lingual one. Check this out, bottom of the list:
    http://global.msi.com.tw/index.php?func=downloadfile&dno=6745&type=manual

  • Canonscan 5600f - Drivers for Ubuntu-Linux

    I use Ubuntu OS, Have you drivers   for Canon scan 5600f for linux?

    Hi Renato, thanks for posting.  Canon provides drivers for users with Windows or Mac based operating systems only; we apologize for the inconvenience!

  • MSI AE2081 TouchScreen Utility for Ubuntu Linux 12.04

    Hi All
    I have a MSI All-in-one AE2081. which I would like to use for a kiosk. It's running Ubuntu 12.04 perfectly. Everything works fine. The only problem I have is that the touch screen is really sensitive and sometimes it highlights items instead of clicking it. Is there a utility available that would allow me to change the click settings? I would like to disable mouse emulation and use a point and click option. I have seen it on other touchscreens.
    Thanks for the help.
    Gerald Weber

    You can also try to reload the plugin database, instructions are in the [[Troubleshoot issues with plugins like Flash or Java to fix common Firefox problems#w_re-initializing-the-plugins-database]] article (deleting pluginreg.dat in the profile folder and reloading firefox)

  • Nokia Ovi Suite for Ubuntu - Linux

    Hi!  I am using Ubuntu. I would be happy if you would make the Nokia Ovi Suite, for this operating system also.
    I also have an go pal (medion) gps.
    Can I use Ovi maps with it ?

    PC synchronising software is offered free of charge by all mobile phone manufacturers, so it's unlikely that any will develop Linux software - the OS may be growing, but it is still only a minority system.
    There are independent solutions avbailable, here are just a couple of examples:
    http://www.sugarsync.com/partners/sync_applications/sync_manager.html
    http://www.linuxelectrons.com/news/mobile/11174/glide-sync-now-available-linux
    To Huczek, I would say that if you created an account here to moan, then don't you think you wasted your effort? If you gave proper info about the problems you've had, the members here might be able to suggest what is going wrong for you.

  • Need firefox(4.0) update for norton antivirus auto login bar.

    i need to know when the update for the norton auto sign in toolbar for firefox 4.0 is going to come out and how to get it when it does...much appreciated

    ok thank you.the reason why i went here is because i did go to symtech and hey told me trhere was an update coming soon.i just need to know when and if it will auto update and install it

  • Sqlplus installation in ubuntu linux

    Hi,
    I have installed Oracle Expression Edition on my system running Ubuntu. I want to run sqlplus from the bash shell. Please let me how can I run it ? Do I need to install any other tool?
    Thanks & Regards,
    Babu

    You don't need to install any other tool but you need to apply the following steps: http://download.oracle.com/docs/cd/B25329_01/doc/install.102/b25144/toc.htm#BABDGCHH

  • Need Basic GD Library Installer for  10.5 XServe

    Does Apple have a page where we can download common web server apps, such as GD? For some strange reason it doesn't appear included on the standard server install. I thought this was a typical web server helper app and by now they would have included it?
    I recently moved an app to a new 10.5 server, and it's been a while since I did an install of GD. Everything is working on the new server, however I have to put GD support on the new server. I'm not doing any kind of custom install, and just need the standard GD installed.
    Does anyone have a pointer to the info for installing GD on a new Mac XServer?
    Thank you!

    This is really the 10.6 Directory Services discussion.
    By "...joined to the domain..." you mean an AD domain?
    If bound to AD and running as OD master, Kerberos shouldn't be running (look in Server Admin, OD) as the machine should be using the AD Kerberos realm for kerberized services.
    For SSO / running Kerberos auth to. use services, clients must be bound to the AD.
    (Kerberos needs "clocks to be synchronized", something like no more than 5 min. difference and using same timezone between all machines using it).
    "...passthrough authentication is not working." - passthrough?
    Using AD credentials to access some OS X server hosted services (for example AFP) might work even without client beeing bound to the AD, but not if OS X server demands kerberos auth. for the service in question.
    With "passthrough" you might mean: client wants to ask OS X server for "access" using AD credentials?
    As I understand it (in a service "simplest configuration" - at least not demanding Kerberos auth.) user/client can "authenticate" to OS X server which really asks the AD to auth. the user and (possibly) the OS X server authorize the user to access the service running on the OS X server.
    But if you want to login on a computer using the AD credentials it needs to be bound to the AD AND a corresponding OS X homefolder must be "reachable".

  • MOVED: MSI GT 780 KLM for Ubuntu Linux

    This topic has been moved to Linux/Unix.
    https://forum-en.msi.com/index.php?topic=157836.0

    Hello, found this guide over the internet, post by SRV69 somwhere in the middle worked once for me. Hope it works for you too.

Maybe you are looking for