Need Flex 2.01 Development at good rates ...

My Fellow American Programmers,
My apologizes to hard working American Flex developers who
want work ... but I've created messages on this forum looking for
help on a massive project since November of 2006 and I haven't
received but one or two credible offers of help, yet they didn't
work out because I need on-site programmers ...
So, now I am requesting that any off-shore Flex development
teams that have counterparts here in the U.S. contact me. I need
one or two developers, depending on budgetary constraints on-site
in Lawndale, CA 90260.
I need intermediate level Flex 2.01 development personnel. I
can direct them as long as they are over the basics and
self-starters.
No Beginners.
We will be moving to 3.0 and JBoss 5.0 when those releases
are most stable.
email: [email protected]
Thank You.

I want to apologize for soliciting the talents of Flex
programmers in these hallowed halls.
Would someone please direct me to more appropriate places
where I might find developers for Flex 2.01 that are competent and
available.
In Regret.
Joe Terry

Similar Messages

Good morning . i have iphone 4s is not working in israel !!!! i need to open for sim free, good morning . i have iphone 4s is not working in israel !!!! i need to open for sim free

good morning . i have iphone 4s is not working in israel !!!! i need to open for sim free, good morning . i have iphone 4s is not working in israel !!!! i need to open for sim free

the only ones who can sim unlock a phone is the ones who sim locked it in the first place
and that is the phone Carrier not apple

Need Some help in Developing an ALV report ..Plz help me

Hi Experts I am basic learner to ABAP Here I need some help in developing a Delivery *** Invoice Report....Please help me by spending a little time..
Tables are VBAK VBAP LIPS LIKP   and Document floe table is VBFA
SELECT VBELN VKORG VTWEG SPART
    FROM VBAK
    INTO TABLE I_VBAK
    WHERE VBELN IN S_VBELN.
IF I_VBAK IS NOT INITIAL .
    SELECT VBELN POSNR MATKL POSAR WERKS
      FROM VBAP
      INTO TABLE I_VBAP
      FOR ALL ENTRIES IN I_VBAK
      WHERE VBELN = I_VBAK-VBELN.
ENDIF.
IF I_VBAP IS NOT INITIAL.
    SELECT * FROM LIPS
      INTO CORRESPONDING FIELDS OF TABLE I_LIPS
      WHERE VGBEL = VBAP-VBELN
      AND VGPOS = VBAP-POSNR.
ENDIF.
IF I_LIPS IS NOT INITIAL.
    SELECT VBELN VSTEL VKORG KUNNR
    FROM LIKP
    INTO TABLE I_LIKP.
ENDIF.
Moderator message : Outsourcing is not allowed, don't expect others to correct your source code. Thread locked.
Edited by: Vinod Kumar on Aug 1, 2011 5:43 PM

hi ,
Look in this link
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/b3/0ef3e8396111d5b2e80050da4c74dc/frameset.htm">http://help.sap.com/saphelp_nw04/helpdata/en/b3/0ef3e8396111d5b2e80050da4c74dc/frameset.htm</a>
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/21/894eeee0b911d4b2d90050da4c74dc/content.htm">http://help.sap.com/saphelp_nw04/helpdata/en/21/894eeee0b911d4b2d90050da4c74dc/content.htm</a>
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/80/1a62bfe07211d2acb80000e829fbfe/content.htm">http://help.sap.com/saphelp_nw04/helpdata/en/80/1a62bfe07211d2acb80000e829fbfe/content.htm</a>
Regards
Renjith Kumar

In need of a Software Developer for a Photoshop Plugin / Extension

I'm in need of a software developer that can create a plug-in or extension panel for Photoshop, according to my instruction.
Is there a list of developers available from Adobe?
Are you a software developer that can help? Please let me know.

Number one - that person has given you false information...the Apple store genius bar supports all Apple products whether in or out of warranty. Checking is free, service on an out of warranty item is not free.
Try a reboot by holding both the power and home buttons until the apple logo appears, ignore the red slider if that appears.
Since you show that you have iOS 7.0.3 you might want to update that iOS to 7.0.4...plug the iPhone in so you are on a solid power source, then while on a WiFi go to Settings > General > Software Update and update to 7.0.4.

Need help with interface development

Hi i need help with requirement below with developing interface between or online order system and sap plz lemme know what is bapi i use for creating customer, update and assigining partner id to costumer.
SAP Development
1.     Using standards SAP functional module (with BAPI), create interface that will create/change Ordering party customer in SAP. Following fields are mandatory for customer creation:
     MANDT     Client
     VKORG     Sales organization
     VTWEG     Distribution Channel
     SPART     Division
     KDGRP     Customer Group (= ZORP)
     KUNNR     Customer number
     NAME1     Name 1
     NAME 2     Name 2 (if required)
     SORTL     Search term (short description)
     ZZALTKN     Search term 2 (old customer number)
     LAND1     Country
     ORT01     City
     PSTLZ      Zip Code
     REGIO      Region (state in USA)
     STRAS     Street
     TELF1     Primary telephone number
     TELFX     Primary Fax number
     ZZPRPLANS     Payment Plan
     CCINS     Payment card: Card type
     CCNUM     Payment cards: Card number
     CCDEF     Payment Card: Default Card Indicator
     ZBDGID     Customer Budget ID
     ZHOLD     Budget Hold indicator
     ZZCOSTCENT     Cost Center
2.     Upon successful customer creation system will issues S (success) message that customer has been created.
3.     New ordering party customer created in step ½, will have to be assigned as new partner to its belonging Sold-to/Ship-to customer. Use standard SAP customer functional module in order to perform this partner ID assignment. Partner ID for ordering party should be ZO.
1.7     Enhancement Functionality
Apart from creating a new interface to do the required functionality, the Order Create Interface also has to be changed to accommodate a field to pass the Ordering Party Number on the Order. The technicalities of how we are going to implement the interface will be laid out in the Tech Specs.
Thanks
in advance

You have double posted, please mark this one as "solved on my own" and refer to this thread
need help with interface development
Regards,
Rich Heilman

[svn:bz-4.0.0_fixes] 20651: Some MBean tests needed flex.management. jmx stuff in the allow classes list for the class deserialization validator so adding it in on BlazeDS 4 .0.0_fixes.

Revision: 20651
Revision: 20651
Author:   [email protected]
Date:     2011-03-07 12:21:11 -0800 (Mon, 07 Mar 2011)
Log Message:
Some MBean tests needed flex.management.jmx stuff in the allow classes list for the class deserialization validator so adding it in on BlazeDS 4.0.0_fixes.
Modified Paths:
    blazeds/branches/4.0.0_fixes/qa/apps/qa-regress/WEB-INF/flex/services-config.mods.validat ors.xml

Thank you very much!
I cant believe this little comment has been so helpful!
But yes it is:
I explain, despite my efforts to find, googled it, forums, faqs, etc...
no where it mentionned the manifest.fm file is... INSIDE the .jar!
Your comment "a zip" made me attempt to open it with winrar, and I found a manifest.fm file inside!
So far I was editing the one at the "source" of my project and rebuilding it with netbeans.
I am going to try that now.
Actually.... :( no its mentionning my main class!
Manifest-Version: 1.0
Ant-Version: Apache Ant 1.7.0
Created-By: 10.0-b19 (Sun Microsystems Inc.)
Main-class: courseworkjava3d.Simple3D
Class-Path:
X-COMMENT: Main-Class will be added automatically by buildWell I have no problems uploading you the .jar, it is for a coursework it is not a private project or whatever:
http://www.uploading.com/files/CM2LKWYU/BetaCourseworkJava3d_Final.jar.html
Oh and I felt on your comment "dont ask us" as if I was suppose to know... i'm a beginner, I did not know that! And I tried to give you so many infos so you dont lose your time if you want to help, especially as after my own research I found many, many results for this "main class" and I tried a few solutions!
Edited by: CupofTea on Apr 13, 2008 3:28 AM

[svn:bz-trunk] 20650: Some MBean tests needed flex.management. jmx stuff in the allow classes list for the class deserialization validator so adding it in on BlazeDS trunk .

Revision: 20650
Revision: 20650
Author:   [email protected]
Date:     2011-03-07 12:20:03 -0800 (Mon, 07 Mar 2011)
Log Message:
Some MBean tests needed flex.management.jmx stuff in the allow classes list for the class deserialization validator so adding it in on BlazeDS trunk.
Modified Paths:
    blazeds/trunk/qa/apps/qa-regress/WEB-INF/flex/services-config.mods.validators.xml

Thank you very much!
I cant believe this little comment has been so helpful!
But yes it is:
I explain, despite my efforts to find, googled it, forums, faqs, etc...
no where it mentionned the manifest.fm file is... INSIDE the .jar!
Your comment "a zip" made me attempt to open it with winrar, and I found a manifest.fm file inside!
So far I was editing the one at the "source" of my project and rebuilding it with netbeans.
I am going to try that now.
Actually.... :( no its mentionning my main class!
Manifest-Version: 1.0
Ant-Version: Apache Ant 1.7.0
Created-By: 10.0-b19 (Sun Microsystems Inc.)
Main-class: courseworkjava3d.Simple3D
Class-Path:
X-COMMENT: Main-Class will be added automatically by buildWell I have no problems uploading you the .jar, it is for a coursework it is not a private project or whatever:
http://www.uploading.com/files/CM2LKWYU/BetaCourseworkJava3d_Final.jar.html
Oh and I felt on your comment "dont ask us" as if I was suppose to know... i'm a beginner, I did not know that! And I tried to give you so many infos so you dont lose your time if you want to help, especially as after my own research I found many, many results for this "main class" and I tried a few solutions!
Edited by: CupofTea on Apr 13, 2008 3:28 AM

Do we need a Library and Develop Module?

Do we really need a Library and Develop module? There's lots of dissatisfaction with Lightroom speed and one of the problem areas is when switching from Library, when in standard preview or 1:1, to Develop and the 'loading' message appears or as on my mac the dreaded spinning beach ball goes crazy. Even with all the previews created it's still slow.
So, if we have a standard preview or 1:1 loaded why can't we automatically be ready to apply any adjustments and save an extra step to another module? The quick develop in the library seems unnecessary and I've never used it. That leaves the metadata and keywording panels requiring a new location, but again these are not something I need to refer to on a regular basis.
Anyone else any similar thoughts?

> ...but I'm pretty darn sure there won't be any back-stepping to REMOVE or substantially alter LR's basic premise...pretty sure Develop will always be about dealing with a single image adjustment (and applying that adjustment to other images if you wish).
And I'm okay with this premise, but it needs additional functionality, such as the ability to apply relative adjustments. It already has this via the keyboard shortcuts while hovering. It just needs a UI adjustment (I once did a mockup of this, and I think it works) and the ability for autosync to recognize them as relative adjustments to the other images.
It also needs additional views. Grid, survey and compare would be nice, but you're only adjusting a single image's RAW data rendering at a time - the others are shown as previews and adjustments to them are rendered that way (like Library does).
The issue is, many people like me end up switching modules far too often. I generally go back and forth between Library and Develop hundreds of times per day. That's way too many times to be suffering the module-switching penalty. I'd prefer to select the images I'm working on in Library, and never see that module again until I'm done working on them. For now, grid and survey are too often needed, and so are relative adjustments.
Develop already has most of the needed functionality. Relative adjustments are already available to one image, a grid is available but only at 1 row (film strip supplied by Library) and a quick-render (the image in the upper left) is available as well. This just needs to be expanded and adjusted so that going back and forth to Library isn't as necessary as it is now. Ideally, you'd import in Library, to your metadata stuff there or in other related modules, choose the image group you want to work on using filters/folders/collections/find, then go to Develop and work on them until you are done.

I need flex sdk 4 to do loading file data

Looks like I need flex sdk 4 to do loading file data as can be seen from the following thread:
http://forums.adobe.com/thread/510429?tstart=0
Hi there, I'm now trying to use the new file features in Flash 10 but I'm getting this error when I try something like
fileRef.load();
ReferenceError: Error #1069: Property load not found on flash.net.FileReference and there is no default value.

I tried to use the example on
http://sherifabdou.com/2008/06/using-the-new-filereference-class-in-flex-to-save-and-load- without-a-server/
and get this error when I click the save button.
Is there something wrong with my computer. I've got flash 10 installed on firefox
ReferenceError: Error #1069: Property http://www.adobe.com/2008/actionscript/Flash10/::save not found on flash.net.FileReference and there is no default value.
at LiveCycle/onSaveText()[C:\ColdFusion8\wwwroot\LiveCycle\src\LiveCycle.mxml:15]
at LiveCycle/___LiveCycle_Button1_click()[C:\ColdFusion8\wwwroot\LiveCycle\src\LiveCycle.mxm l:41]

Xcelsius support which Adobe Flex SDK (Software Developer Kit)??

Hi @ all,
can anyone tell me what Xcelsius which Adobe Flex SDK (Software Developer Kit) support?
Xcelsius 5.3.0.0                                                     = Adobe Flex SDK 2.0.1
SAP Crystal Reports Dashboard Design 2008           = Adobe Flex SDK ??
SAP Crystal Reports Dashboard Design 2011 beta     = Adobe Flex SDK ??
For your help I would be very grateful.
Greetings
Armin

Hi Armin
Xcelsius 2008 SDK is compiled using Flex 2.0.1 Hotfix 3.
I am attempting to find the version of Flex that Xcelsius 2011 uses. If I am able to find the answer, I will post it here.
Regards,
Chris

Is there flex coding for developing sudoku ?

hi all,
is there flex code for developing sudoku ?
pls help me ...
thanks in advance..
regards,
saran r

Hi
Here is the link. You can get the source code by right clicking on the application.
http://myflexapps.appspot.com/examples/initial/Sudoku
Hope this helps
Rush-me

Need a Badi to look the good issue status for prod order before good receipt in MIGO

Hi ,
Need a Badi to look the good issue status for compoents for prod order before good receipt in MIGO.
Example : There are 10 comps need to be issued to production order to make any assy but 6 comps were issued
and remaining 4 comps are not yet issued.,in this situation if I try to do goods receipt for prod order through MIGO.,system should populate the warning
message saying still goods issue are pending for prod order.
Please advise .
Thanks
Prasad

Hi Prasad,
Before trying with a BAdI, have you tried to control this behaviour thru the Order confirmation parameters (OPK4)?
Note that you can have a termination in case of having problems in the goods movements..
Take a look of this and the SAP help:
Termination of Confirmation if Incorrect Goods Movements
Controls if the confirmation is terminated in the event of incorrect goods
movements.
Use
This enables you to terminate the confirmation in the event of incorrect
items, for example, to prevent postprocessing records.
Dependencies
The indicator is only evaluated if either no process control key or one
process control key has been stored that enbles the goods movements to be posted
in dialog AND for which the "provide error handling for goods movements"
indicator is active. If there are incorrect goods movements, the system behaves
as follows:
A log is issued that gives information on the incorrect goods movements
If these incorrect goods movements are determined by inventory management,
then the option of correcting these errors is offered in the error handling
If the correction is not successful, the confirmation is terminated
Kind Regards,
Mariano

What kind of document i need for register iOS Developer Enterprise Program ?

What kind of document i need for register iOS Developer Enterprise Program ?

Wond,
I have full access(SAP_ALL) on BI. What kind of Authorization on R/3 system to extract the data?
Thanks,

Need your suggestions for developing a Forum Site using Adobe Flex

Hi ,
I want to develop a small Forum Site where people can post questions and reply to questions .
I want to develop the whole thing using Adobe Flex , Is there any plugin avialable for this .
Means i mean to ask , if i go for normal J2EE there is a JForum avialable as far as i know .
Please share your ideas .

I meant "Don't use flex" unless you have some superb new design for a forum. I suspect that if you already had such a design, you wouldn't need to ask the question. Flex for Flex sake isn't good.
There are already great html forum solutions out there.
Basically, there's no point in duplicating in Flex what is already done in HTML, unless the Flex version offers a significant improvement to the user experience in some way.
I am not aware of any Flex forum implementations and there is probably a good reason for that.
Maybe someone else will know of one.

Flex and mobile development for webOS?

Do the 'Hero' and 'Burrito' products provide the ability to implement Flex code for the webOS platform? Or is the webOS platform not supported yet? If Flex isn't ready for the webOS platform now, then I suppose I will need to use JavaScript and HTML 5 on webOS for now.
The webOS platform is the go-forward strategy for Hewlett-Packard for both smart phones and tablets.

The right place to look for updates on Flex is http://flex.apache.org
The good thing is that activities are still going on. The bad things are that:
- Unless the dependency to Adobe air is cut, Flex as an open source project is bound to fail imho. See FlexJS for updates on that point
- Current activties seem to be focused around making things more polished rather than working on hard stuff (typically developing an independent and open source runtime execution engine => flexJS)
So...
For a small company, home development, not so business critical applications, I recommend warmly Flex, since it is one of the best (if not the best) cross-platform mobile development environment (Very good performances if used appropriately, very good programming environment, lots of components, structured language, lots of documentation and tutorials, easy to design, etc.)
for business critical applications... The risk is high !

Need Flex 2.01 Development at good rates ...

Similar Messages

Maybe you are looking for