Need FM/BAPI for production order

Hi all
Let me know FM / BAPI for get component overview based on production order?

hi
check this
BAPI_ALM_ORDER_GET_DETAIL
or check from SPRO>Production>Shop Floor Control-->System Modifications->Enhancement in the Adding and Changing of Components
-ashok

Similar Messages

IDOC/BAPI for Production order creation from Legacy system

Hi all
We are using an interface to create Production orders from legacy to SAP. Would you recommend an IDOC or a BAPI to create Production orders. If IDOC or BAPI then could you please mention which one?
thanks a bunch

Hi John,
For your purposes, please use BAPI for production order creation from legacy system. There is no standard inbound IDoc available to use. SAP has an IDoc for outbound interface only (message type LOIPRO).
If there is an inbound IDoc available, I would recommend to use an IDoc.
IDoc technology has excellent error handling and will allow you to reprocess an error (if any).
BAPI is also good approach to use and fast in term of processing.
For BAPI approach, you can use BAPI BAPI_PRODORD_CREATE.
Hope this will help.
Regards,
Ferry Lianto

BAPI for Production order creation against wbs element

dear all,
I am using BAPI (BAPI_PRODORD_CREATE) for Production order creation against wbs element.I am putting following input paramters in this
material no,
order type
plant
qty
basic start dt & end dt
wbs
But during GRN it is not taking the account assignment as project stock i.e. its picking movement type 101 but it should be 101Q.
For this what changes are required.
regards
ravi arora

Hi,
2 options i can think of:
1. Create a BDC program by recording co10
2. Create a planned order with order type PR using BAPI_PLANNEDORDER_CREATE, specify the WBS element & other details. Now use BAPI_PRODORD_CREATE_FROM_PLORD to create a production order with reference to the planned order created earlier.
I believe option 2 should meet your need. Check & revert.
Regards,
Vivek

I need a bapi for service order

i need a bapi for serviceorders the fields which i required in the output should be
GLTRI(Actual finish date),
FTRMP(Planned release date),
RMANR( SD Document Number),
POSNV_RMA(Item number of the SD document),
PM_OBJTY,
ARBPL.

Dear Jammer,
This question can be put in ABAP forum. You can also try SD forum. Chances of getting a reply on this query is almost nil in this forum.
Please let me know in case of any query and keep revisiting this forum.
Regards,
Rakesh

Its urgent.!!!!!!BAPI for Production Order

HIi All ,
i need to fecth Storage Bin/Material/Quantyti/Descrition .
All values can be obtained from the production order record using the BAPI.
which BAPI is there for this req?

some of the function modules are
BAPI_PRODORD_CHANGE
BAPI_PRODORD_CHECK_MAT_AVAIL
BAPI_PRODORD_CLOSE
BAPI_PRODORD_GET_DETAIL
BAPI_PRODORD_GET_LIST
BAPI_PRODORD_RELEASE etc better you put BAPI_PRODORD_* in Function module field and press F4 and get more BAPI fuction modules according to your production order scenario.....
reward points if helpful...
thanks,
velu....

BAPI for Production Order creation ?

Hi Experts,
I am new to PP module and as per my requirement I have to:
1. Create Production order in ECC 6.0
    After searching BAPI explorer, SDN and other sites I could see that there is no BAPI for Create Production order.
    In one of the link I could find FM CLOI_CHANGES_UPL_31 used to create Production order in SAP.
Is there any BAPI to create ??
Can anyone let mw know right FM or BAPI to create Production order with an example.
2. And I have to:
Delete Production order
which BAPI is used for deletion of Prd Ord
BAPI_PRODORD_SET_DEL_INDICATOR or BAPI_PRODORD_SET_DELETION_FLAG
For Confirm Production order - in ECC 6.0 Let mw know the BAPI for this ..
Really helpful if you answer my queries...
Thanks
Uday

Hi udaya,
use the BAPI 'BAPI_PRODORD_CREATE'
The following BAPIs are available confirmation of production orders:
    Entry
        Time ticket
        ProdOrdConfirmation.CreateTimeTicketMultiple
        BAPI_PRODORDCONF_CREATE_TT
        Time event
        ProdOrdConfirmation.CreateAtHeaderLevelMultiple
        BAPI_PRODORDCONF_CREATE_HDR
        Order confirmation
        ProdOrdConfirmation.CreateAtHeaderLevelMultiple
        BAPI_PRODORDCONF_CREATE_HDR
        Activity confirmation
        ProdOrdConfirmation.CreateActConfMultiple
        BAPI_PRODORDCONF_CREATE_ACT
    Defaults
        Time ticket
        ProdOrdConfirmation.GetTimeTicketProposal
        BAPI_PRODORDCONF_GET_TT_PROP
        Time event
        ProdOrdConfirmation.GetTimeEventProposal
        BAPI_PRODORDCONF_GET_TE_PROP
        Order confirmation
        ProdOrdConfirmation.GetAtHeaderLevelProposal
        BAPI_PRODORDCONF_GET_HDR_PROP
    Cancelling confirmations
    ProdOrdConfirmation.Cancel
    BAPI_PRODORDCONF_CANCEL
    List of confirmations
    ProdOrdConfirmation.GetList
    BAPI_PRODORDCONF_GETLIST
    Detail data for confirmations
    ProdOrdConfirmation.GetDetail
    BAPI_PRODORDCONF_GETDETAIL
    Existence check
    ProdOrdConfirmation.ExistenceCheck
    BAPI_PRODORDCONF_EXIST_CHK
Regards,
Ravi

IDOC/BAPI for production order confirmations

Does anyone know IDOC or a BAPI for confirming a production order? CO11 is the normal transaction for confirmation.
I found one BAPI: BAPI_PRODORDCONF_CREATE_HDR
Is this the right one?
-Thanks
Bhaven

Hi Bhavan,
status can be find using function module STATUS_TEXT_EDIT.
Sample code:
CALL FUNCTION 'STATUS_TEXT_EDIT'
 EXPORTING
 client = sy-mandt
 objnr = >object number of order<
 only_active = 'X'
 spras = 'E'
 IMPORTING
 line = hold_status
 EXCEPTIONS
 object_not_found = 1
 OTHERS = 2.
*Exception in case status is not found
 IF sy-subrc <> 0.
 MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
 ENDIF.
*Check Status of the Order
 IF hold_status CS 'CNF'.
 confined production orders.
 ENDIF.
Best regards
Suresh Babu Karanam

FM or Bapi for production order creation?

hi Friends,
Any FM or bapi is exist to create Production Order
regards,
Mahesh

Hi All
BAPI_PRODORD_CREATE does not contain all the parameters which are required to create a Production order.
It doesn't has some parameters like Size1,Size2,Size3,Unit, Formula,Length,Colour etc.
Pls suggest how to overcome this problem.
Kindly, let me know if the same BAPI can be used to create collective orders also or not?

FM or BAPI for production order component split batch

Hi,
I'm trying to split a production order component quantity into batchs with FM or BAPI.
Using BAPI_ALM_ORDER_MAINTAIN i can create or modify components but i can't set field split batch flag SPLKZ and reference SPLVR.
Can you help me?

In standard product order process in CO02 when i split material with standard function I obtain several lines. These new lines refer to the originale one by fields SPLVR and SPLKZ.
Eg. In operation 0010 i've 10 PC of MATERIAL1
Item
Material
Qty
Batch
Batch Key (SPLKZ)
Itm no stock (SPLVR)
0010
MATERIAL1
10 PC
In CO02 i take MATERIAL1 from BATCH1 and BATCH2 the final result is
Item
Material
Qty
Batch
Batch Key (SPLKZ)
Itm no stock (SPLVR)
0010
MATERIAL1
1
1
0010
MATERIAL1
7 PC
BATCH1
2
1
0010
MATERIAL1
3 PC
BATCH2
2
1
So I'm trying to reproduce this standard behavior with BAPI or FM.
Thaks

Function module for Production order update (Table AFKO)

Hello All,
I know similar subject has been posted but please read the following.
SAP 4.6c doesn't provide BAPI for production order update.
We did develop an ABAP program that update production order and schedule it in a job.
We are looking of avoiding direct update in table AFKO which our program do right now.
We looked (with SE37) at either BAPI or FM to pass parameters to a functioin that would perform that update and ensure data integrity.
CO_ZV_ORDER_POST seems interesting but is also using a lot of parameters and we have diffiulties to test it and understand it our dev team being fairly new.
Can somebody tell us how to use this function or tell us another FM that could be used. (ie passing internal table content (New fields values) and a key value (AUFNR)) to update table AFKO and related objects/tables
Regards
Marc

hi,
TABLE IS AFKO
rgds
anver
if hlped mark points

Error while doing Good Issue for Production Order using BAPI

Hi All,
I am facing an error like 'u2018Content of order 1011907: MDT218AJ10 transferred to interface (IMSEG): T-86410-71".
I have written the code as below. Please let me know what is missing when using the BAPI 'BAPI_GOODSMVT_CREATE'. What is the cause of this error ?
*Action in Transaction (GM_CODE)
*GM Code for Goods Issue for Production Order is 03
gs_gmcode-gm_code = '03'.
*Header Data
*Posting date
gs_header-pstng_date = sy-datum.
*Document date
gs_header-doc_date = sy-datum.
*Item Data
*Material
gs_item-material = zptp_s_rf_migo_261-matnr1.
*Movement Type
gs_item-move_type = '261'.
*Movement Indicator
gs_item-mvt_ind = 'F'.
*Stock Type
gs_item-stck_type = 'F'.
*Plant
gs_item-plant = gv_plant.
*Storage Location
gs_item-stge_loc = gv_str_loc.
*Quantity
gs_item-entry_qnt = zptp_s_rf_migo_261-menge2.
*Unit
gs_item-entry_uom = gv_uom.
*ISO code for unit of measurement
gs_item-entry_uom_iso = gv_uom.
*Order Number
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
 EXPORTING
 input = zptp_s_rf_migo_261-aufnr
 IMPORTING
 output = gs_item-orderid.
*Reservation Number
gs_item-reserv_no = gv_resv_num.
*Reservation Item
gs_item-res_item = gv_resv_itm.
*Reservation Type
gs_item-res_type = gv_resv_type.
APPEND gs_item TO gt_item.
Calling BAPI_GOODSMVT_CREATE to create the Material Document Number
CALL FUNCTION 'BAPI_GOODSMVT_CREATE'
 EXPORTING
 goodsmvt_header = gs_header
 goodsmvt_code = gs_gmcode
 IMPORTING
 goodsmvt_headret = gs_headret
 TABLES
 goodsmvt_item = gt_item
 goodsmvt_serialnumber = gt_serial
 return = gt_return.
Thanks in Advance.

hi,
did you look at message ?
System says, there are differences between the interface data and the order data. It can be anything. I think you should check
data in the interface .
this is the long explanation of your message :
Diagnosis
When calling the function module MB_CREATE_GOODS_MOVEMENT or the BAPI GoodsMovement.CreateFromData (BAPI_GOODSMVT_CREATE) to post a goods receipt for a production order, there are differences between the interface data and the order data.
Example: The order was created for plant 0001, but plant 0002 is passed on in the interface.
The system checks this for the material and the order item.
System response
Due to this difference, the system cannot post the goods receipt.
Procedure
Check the data in the interface (IMSEG-WERKS, IMSEG-AUFNR). If necessary, correct the plant or the order number in the interface.
<< Moderator message - Point begging removed >>
Edited by: Rob Burbank on Feb 6, 2012 11:24 AM

Bapi or FM or tabel or any standard transaction code for Production order linking to get child production orders based on parent production order

Dear Guru's,
we have a requirement i.e. user can convert planned orders in to production orders (CO41) based on those production orders we can get Route card( Z Smart form) presently we are using manual input for that Route card. recently we got requirement for this i.e. make to automatic generation of route card for this requirement we need to get the list of child's production orders based on parent production order
so as per my requirement i need to get all child part numbers production orders based on parent production order number and quantity i tried in MD4C and CO46 but those transactions codes are picking multiple lines also so for this requirement please give your valuable suggestions
Regards,
Venkat

Dear Friends,
Thanks for your reply,
My business process is MTS purely strategy 10, for route card all components with production orders we can give input as like bellow these production orders are converted from planned orders,between few components are don't have production orders those are F-30 materials,because of this reason i need link for production order to child components orders
01
IND1
IND1
A1CE2003520103-005
55685815
02
IND1
IND1
A1CE2003520103-010
55685814
03
IND1
IND1
A1CE2003520103-015
55685813
04
IND1
IND1
A1CE2003520103-020
55685812
05
IND1
IND1
A1CE2003520103-025
55685811
06
IND1
IND1
A1CE2003520103-030
07
IND1
IND1
A1CE2003520103-035
55685810

Business Object (BAPI/IDOC) for production Order

Hi All
I have requirement where data is coming from legacy system to R/3 via XI to generate a production order. I am not able to get right BAPI/ IDOC for inbound Production Order. Can anyone has done similar scenario. Can u suggest me BAPI or IDOC for same. I am using IS-Mills 4.7 version for R/3
Thanx in advance
Regards
Vinod

HI Vinod,
I think U can use IDOC LOIPRO01 for Production Order...
Regards,
Sridhar Reddy

How can I add a new line item for production order?

HI all,
How can I add a new line item for production order through BAPI/FM? Thanks in advance.

Hi Mil,
Unfortunetly SAP is not in front of me.
But if possible go to BAPI transaction , check for any production order's bapi for CHANGE purpose. Where you will be able to add your new line.
Reward if useful!

Early Inspection for a Goods Receipt for production order

Dear Experts,
This is with respect Early Inspection for a Goods Receipt for inspction type 04.( 03 is also active in material master)
We made partial confirmation 250 qty for production order using t code co11n ( total qty of production order is 1000).
made the usage decision with an acceptance and posted all open stocks. to unrestricted.
Now in second partial confirmation prodn order of 250 qty was made . This suppose to be rejected . but sytem will add this 250 qty directly to unrestricted stock . how to over come this .
Regards
Sandeep

Don't make the UD until all stock has been receipted?
You basically approved the batch. So why wouldn't the system put the stock to unrestricted?
Why would you make a UD when you still have stock to be posted anyway? You can post stock without without making a UD so why not just post some if you need it, and wait on making the UD?
Craig

Need FM/BAPI for production order

Similar Messages

Maybe you are looking for