Need Folder/Subfolder Listing
Hello
I have a hierarchy of a few dozen folders/subfolders, containing a total of a few hundred word processing documents, on an eMac OS 9.2. I need to generate a text file with each line representing the full path to each document. The equivalent PC command is:
dir /b /s > dir.txt
How can I best accomplish this task?
Thank you,
Jeff Bowman
That worked perfectly, thank you.
Also, I'd like to comment on the nature of your helpful and neighborly reply. I'm new to Mac, and if this is my first impression of the folks over here, I'm impressed.
I'm imagining something akin to the small and tight-knit Microsoft Visual FoxPro programming community, of which I used to be a part. Fiercely zealous and uncommonly kind to one another, they're something to behold.
Alas, however, when I switched to .NET programming my old friends wouldn't talk to me anymore.
But that's not my point. My point is that I think I can enjoy working with this Macintosh platform and its people, if I'm correct in my suspicions. I don't think I could deliver myself to the advocacy altar one way or the other, but I do appreciate learning new ways to accomplish tasks at hand.
So thanks again, and see you down the trail!
p.s. Upon further investigation I find that I do indeed have OS X installed.
Similar Messages
-
I have looked everywhere, but can't find exactly what I'm looking for. I need a script that will scan and make a list of all subfolders within a folder. I don't need the path or anything like that. Just the names of the subfolders, and the subfolders in the subfolders. Is this doable? I would like the list to be created in iA Writer, TextEdit, or Word. Thanks for any help.
you want something like this:
tell application "Finder"
set folderNames to name of every folder of entire contents of folder "HD:path:to:folder"
end tell
where HD is the name of the external drive as it shows up on the desktop. If there are a lot of items in the folder, you may need to use a 'with timeout' block to keep the script from timing out on you. -
When expanding folder in list view, finder always go to top. How to stop it?
How to make finder not going to top back again whenever expanding a folder in list view? It just like clicking go to top on a website. i have a lot of subfolder, but when i expand it, finder show back the top list folder(zuupp to the top, grrr!!!), it so annoying to scroll back down just to get back where the last folder expand.
18 months later someone finally responds to you. I dislike this behavior very much and cannot find a workaround. The current push by Aple is to make the smaller devices more accessible which is radcially compromising the desktop experience. I asume you have updated to Mavericks by now. The auto-sizing columns remains an issue as well. If this is driving you bonkers too. Use TAG View and the auto resize to file name length returns.
-
how do i choose a photos folder for my screen saver. iPhoto used to be listed as a dropdown choice. now only folder is listed.
You cannot take a folder out of the Trash to your Desktop without erasing the one on the Desktop. You need to first change the name of the folder on the Desktop. Or you can open the folder that's in the Trash and drag the files onto the Desktop assuming there aren't too many of them.
But if you have a duplicate on the Desktop why do you need to remove the one that's in the Trash?
If you feel you must take the folder out of the Trash, then you need to rename the duplicate that's on your Desktop.
If you wish to put the folder back where it was when you deleted it, then open the Trash window, select the folder, then CTRL- or RIGHT-click and select "Put Back" from the context menu. -
How do I manage photos using a folder - subfolder type structure?
How do I manage photos using a folder - subfolder type structure as I have done previously within Windows? For example, my photos were stored with a folder for each year and sub-folders for each month whicheach held the photos. Can I do this in iPhoto?
For example, my photos were stored with a folder for each year and sub-folders for each month whicheach held the photos
Why bother?
Check out the search box at the bottom of the Window. (Click on the Magnifying glass, it opens it) Now click on the mgnifying glass in the search box) and select 'Date'. Now you can find all the photos from any day, month or year. If you want to find the photos from a range - say a paticular week - then you can do that with a Smart Album.
Organising photos by date means you have to remember the date the shot was taken, and after a while, and after a few thousand shots, this gets harder and harder to do, so you spend more and more time rooting through folders.
iPhoto offers a range of organising tools and each offers more possibilites to quickly find the shot you're looking for. For instance:
I use Events simply as big buckets of Photos: Spring 08, July - Nov 06 are typical Events in my Library. I use keywords and Smart Albums extensively. I title the pics broadly.
I keyword on a
Who
What
Where basis (The When is in the photos's Exif metadata). I also rate the pics on a 1 - 5 star basis.
Using this system I can find pretty much find any pic in my 45k library in a couple of seconds.
So, for example, I have a batch of pics titled 'Seattle 08' and a typical keywording might include: John, Anne, Landscape, mountain, trees, snow. With a rating included it's so very easy to find the best pics we took at Mount Rainier.
File -> New Smart Album
set it to 'All"
title contains Seattle
keyword is mountain
keyword is snow
rating is 5 stars
Or, want a chronological album of John from birth to today?
New Smart Album
Keyword is John
Set the View options to Sort By Date Ascending
Want only the best pics?
add Rating is greater than 4 stars
The best thing about this system is that it's dynamic. If I add 50 more pics of John to the Library tomorrow, as I keyword and rate them they are added to the Smart Album.
In the end, organisation is about finding the pics. The point is to make locating that pic or batch of pics findable fast. This system works for me. -
Revision: 8732
Author: [email protected]
Date: 2009-07-22 08:00:53 -0700 (Wed, 22 Jul 2009)
Log Message:
Do not need to invalidateDisplay list when setting either the horizontalScrollPosition or verticalScrollPostion since the
ContainerController's setters call updateForScroll(), if scrolling needs to happen, which updates the container.
Also do not need to invalidate the display list when the scroller calls clipAndEnableScrolling install or uninstall the RET as a viewport. The scroller should do it if necessary.
QE notes:
Doc notes:
Bugs: SDK-22293
Reviewer: will be Gordon and Corey
Tests run: performance tests mentioned in the bug
Is noteworthy for integration:
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-22293
Modified Paths:
flex/sdk/trunk/frameworks/projects/spark/src/spark/primitives/RichEditableText.asThe same id shows at the top of the Settings > iCloud screen on both your iPad and iPhone - if they are different then they are not being synced. And for contacts and calendars you need Settings > iCloud > Contacts and Settings > iCloud > Calendars 'on' on both devices
-
I need the check list for SOLMAN implementation
Hi gurus ,
i need the check list for solution manager implementation and what are the things to be discuss with the client , i am new to SOLMAN, i have to do this by the evening , any one can help me out
Cheers
Gopal.raoHi Gopal,
I am not sure if this thread of yours is in continuation of the other thread you have started which has been replied by two other Forum members.
The checklist depends upon which Scenario(s) of SolMan you are trying to implement.
- Implementation/ Upgrade of ERP systems
- Service Desk
- Change Request Monitoring
- Diagnostics
- Solution Monitoring (includes BPM/ Interface monitoring)
- Delivery of SAP Services (EWA, .....)
Unless you specify the scenario you are seeking information on, it is difficult for anyone to pose a satisfactory reply.
Best regards,
Srini -
Need to get list of all portlet instances in system
Hi guys
Probably such question already was here, but I cant find any solution.
I need to get list of instance labels of all portlets used on all desktops in current domain.
Thanks for help.
Edited by AndreW at 04/08/2008 8:23 AMHi
you havent told me the version you are using.
For 8.1 (and i suppose you should have similar classes in 10)
get a IDesktopDefinitionManager from the DesktopDefinitionManagerHome
IDesktopDefinitionManager.getDesktopDefinitions --> gets all the definition
for each definition IDesktopDefinitionManager.getDesktopView
from the desktopView get the Primary BookView.
recursively go through the book view to get getNavigableView . if the navigable is itself a BookView , recurse. if it is a pageView then get the PlaceableView. If the placeable view is of type BookView then do the recursive stuff, else if it is a PortletView you have what you want.
regards
deepak -
Hi Friends,
Need report to list the system name, client status, client version, OU name info for a particular collection of systems.
Please help as it would be appreciated much as i am not familiar with creating custom reports in SCCM. Thanks.
Regards,
ThangarajSelect v_R_System.Name0, v_R_System.Client_Version0, v_RA_System_SystemOUName.System_OU_Name0,
case when v_R_System.Client0 = '1' then 'Client is Installed'
else 'Client Not Installed'
end as 'Client Status'
FROM v_R_System JOIN v_RA_System_SystemOUName ON v_R_System.ResourceID = v_RA_System_SystemOUName.ResourceID WHERE System_OU_Name0 LIKE '%HR'
John Marcum | Microsoft MVP - Enterprise Client Management
My blog: System Center Admin | Twitter:
@SCCM_Marcum | Linkedin:
John Marcum -
Need a complete list of products for students plan
Hi, I need a complete list of products for the student's plan.
Thanks!Hi Mio,
Here is the link for Creative Cloud pricing and membership plans | Adobe Creative Cloud
Thanks,
Atul Saini -
hello - I have done a series of edits on premiere cs6 and now need to transfer info to the client overseas so I have to transfer the rushes and would like to know what I need to provide ( list...) regarding the edit done on the CS6 version - thank you
>I have managed to download the footage onto Picture Motion Browser
Isn't Picture Motion Browser available for Windows only? If so, why are you posting in an Final Cut Express forum? My apologies if I'm incorrect.
-DH -
Media player file listing needs folder view
Oh, you guys hid Software Update in the Customer Support menu rather than putting in the logical Settings menu, and I see that there are no new updates. Please fix this folder/truncation issue at your earliest convenience... Thanks.
Hi Les492,
Welcome to the Sony Community!
We always appreciate customers who take the time to give us their feedback for the betterment of our product.Thank you very much for taking the time to share your concerns with us. Sony takes the voice of our customers very seriously and hearing all feedback - good and bad is important to us. I've forwarded your comments to our executive responsible for our media placement as she is always appreciative for this type of feedback. While our media plans are confidential, I can tell you that Sony values our customers and their opinions highly and we don't want to alienate you from our brand.
For further assistance regarding your concern, please contact the Sony offices/Sony representative offices nearest to your place of residence in Asia Pacific region http://www.sony-asia.com/countryselector.html?hpid=countryselector:AsiaPacific. Due to proximity, they are in a better position to respond to your questions or concerns.
If my post answers your question, please mark it as "Accept as Solution" -
I Need a wish list for an "HD recording studio"
I was hoping someone could help me with a list of, what I would need to have a High end HD recording studio.
I already have a Yamaha DM 2000 mixing board.I don't know if this would work remotely, but for local apps that are indexed by Spotlight you can use a command like
mdls -name kMDItemVersion <path to file>
So for iPhoto.app in my /Applications folder, I get:
$ mdls -name kMDItemVersion /Applications/iPhoto.app
kMDItemVersion = "8.1.2" -
Hello List,
In an attempt to minimize typing for the PDA User, I would like to show a list of files located in a particular folder or let them select a file name while browsing.
I know how to accomplish this using LabVIEW; however, the PDA Module does not seem to support List.VI and some of the other "browsing" tools. In fact, I would be able to capature the file name if I could force some type of a browse event similar to what occurs using the simple "File Dialog" in LabVIEW.
My objective is to let them select files (about 15 characters in length) without having to manually enter them with stylus, which can be time consuming.It can be done through API calls, however, I tried several times to build a DLL out of it for PDA but couldn't get it to work (compile). NI really need to simplify the process to call native API functions.
-Joe -
Need key commands list - complete
can someone do me a favor and email me the clipboard output of the comprehensive key command list? i'm not in a position to do this myself right at the moment. if someone chimes up, i'll reply with the email address to send it to. no formating or anything is necessary.
also, for those that use key commands a lot and have some complex customization, what is your opinion on its reliability? my questioning is due to the possible utilization of a remote session of logic, receiving custom MIDI sysex commands to basically remote control functionality via MIDI. (i will be sending commands via TCP, but there will be a local server sending MIDI to the host machine) do key commands ever not execute? if you send a rapid sequence of key commands, do they execute in a predictable fashion? etc...Why do you need to use Sysex commands? They're so much more complicated to program and keep track of...
In terms of reliability, sometimes I find that key commands "go bad". This is almost always a case of "key label" commands going bad and to fix the problem they need to be re-programmed as "key position". That's the only buggy behavior re key commands, aside from the bugs in the key command window itself. But that's another story. Here's the list:
-------- Global Commands --------
* Record
•Record Repeat
Tab •Record Toggle
sh - 18 •Capture Last Take as Recording
•Capture Last Take as Recording & Play
Enter Play
; Pause
Return Stop
Space Play or Stop
Rewind
Forward
Fast Rewind
Fast Forward
Rewind 1 frame
Forward 1 frame
Rewind by format value
Forward by format value
Shuttle Rewind
Shuttle Forward
Scrub Rewind
Scrub Forward
Scrub by MIDI Value (-2-)
ct 0 •Play from Beginning
•Play from previous Bar
•Play from Left Locator
•Play from Right Locator
•Play from left window corner
Goto Left Locator
ct Enter Goto Right Locator
Goto Last Play Position
Stop Goto Last Play Position
Stop Goto Left Locator
op co G •goto Position...
. Set Left Locator...
ct . Set Right Locator...
sh [ Set Left Locator by Song Position
[ Set Left Locator by rounded Song Position
Set Left Autodrop Point by Song Position
Set Left Autodrop Point by rounded Song Position
sh ] Set Right Locator by Song Position
] Set Right Locator by rounded Song Position
Set Right Autodrop Point by Song Position
Set Right Autodrop Point by rounded Song Position
Set Locators by Regions
op O Set rounded Locators by Regions/Events
ct X •Set Locators & Play
X •Set rounded Locators & Play
•Set rounded Locators & Cycle Play
•Set rounded Locators & Record
•Set rounded Locators & Cycle Record
Swap Left and Right Locator
Move Locators forward by Cycle Length
Move Locators backwards by Cycle Length
sh Enter •Play from Selection
•Goto Selection
ct a Create Marker
sh a Create Marker without rounding
Create Marker by Regions
Delete Marker
sh M Open Marker List...
Open Marker List as Float...
Open Marker Text...
Open Marker Text as Float...
Set Locators by Marker & Enable Cycle
Set Locators by previous Marker & Enable Cycle
Set Locators by next Marker & Enable Cycle
sh -123 Goto Previous Marker
sh -124 Goto Next Marker
Goto Marker Number...
sh - 85 Quick Edit Marker
ct 1 Goto Marker Number 1
ct 2 Goto Marker Number 2
ct 3 Goto Marker Number 3
ct 4 Goto Marker Number 4
ct 5 Goto Marker Number 5
ct 6 Goto Marker Number 6
ct 7 Goto Marker Number 7
ct 8 Goto Marker Number 8
ct 9 Goto Marker Number 9
ct op 0 Goto Marker Number 10
ct op 1 Goto Marker Number 11
ct op 2 Goto Marker Number 12
ct op 3 Goto Marker Number 13
ct op 4 Goto Marker Number 14
ct op 5 Goto Marker Number 15
ct op 6 Goto Marker Number 16
ct op 7 Goto Marker Number 17
ct op 8 Goto Marker Number 18
ct op 9 Goto Marker Number 19
ct op co 0 Goto Marker Number 20
Select Previous Song
Select Next Song
Select Song 1
Select Song 2
Select Song 3
Select Song 4
Select Song 5
Select Song 6
Select Song 7
Select Song 8
Select Song 9
Select Song 10
Select Song 11
Select Song 12
Select Song 13
Select Song 14
Select Song 15
Select Song 16
Select Song 17
Select Song 18
Select Song 19
Select Song 20
C Cycle
Drop
Replace
S Solo
op - 1 •Set Solo Lock Mode
ct op co - 1 •Reselect Solo-locked Regions
Solo off for all
Mute off for all
sh ct * Record off for all
Sync intern/extern
•Tap Tempo
MIDI Machine Control
sh ct op * Toggle MIDI Remote (always MIDI remotable)
Disable MIDI Remote
co 3 •Set next higher Format
co 2 •Set next lower Format
N MIDI/Monitor Metronome Click
Send Reset Controllers
sh Help Send discrete Note Offs (Panic)
Send Maximum Volume
Send Used Instruments MIDI Settings
Send All Current Fader Values except Sysex
Send All Current Fader Values
•Revert to Current Screenset
Copy Screenset
Paste Screenset
Lock/Unlock Current Screenset
•Next Screenset
•Previous Screenset
- 83 Recall Screenset 1
- 84 Recall Screenset 2
- 85 Recall Screenset 3
- 86 Recall Screenset 4
- 87 Recall Screenset 5
- 88 Recall Screenset 6
- 89 Recall Screenset 7
- 91 Recall Screenset 8
- 92 Recall Screenset 9
sh op co C Copy MIDI Events...
sh ct X Extended Region Parameters...
Import Settings...
Open Synchronization Song Settings...
sh N Open Metronome Song Settings...
Recording options...
Open Tuning Song Settings...
sh ct -106 Open Audio Song Settings...
ct -106 MIDI options...
sh ct C Chase Events...
Open Score Song Settings...
Open Video Song Settings...
Preferences...
Open Global Preferences...
-106 Open Audio Preferences...
Open MIDI Preferences...
Open Display Preferences...
sh ct co S Score Preferences
Open Video Preferences...
sh F14 Open Automation Preferences...
Open Control Surfaces Preferences...
Open Surround Preferences...
Initialize All Except Key Commands...
Start Logic Setup Assistant...
Start Logic AU Manager...
Import File...
sh F1 Open Event Editor...
co 1 Open Arrange Window...
Open Track Mixer...
F3 Open Score Editor...
co 4 Transform
Open Hyper Editor...
Open Matrix Editor...
co 7 Open Transport...
F8 Open Environment...
co K Open Step Input Keyboard
\ Open Audio Window...
Loop Browser...
sh co - 14 Open Sample Editor...
EXS24 Instrument Editor
Open Project Manager...
Open Signature Changes List...
ct F1 Toggle Event Float
F1 Toggle Event Editor
Toggle Arrange Window
co M Toggle Track Mixer
sh F3 Toggle Score Editor
Toggle Transform
Toggle Hyper Editor
F2 Toggle Matrix Editor
F4 Toggle Transport
Toggle Environment
Toggle Audio Window
Toggle Sample Editor
Toggle Signature Changes List
Start external Sample Editor
sh / Open System Performance...
TDM DSP Usage
T Open Tempo List...
Open Tempo Operations...
Open Tempo Interpreter...
K Open Key Commands...
ct C Open Object Colors...
Open Movie...
sh co F Open Movie as Float...
Open Movie Again
sh ct op A Open Movie Again as Float
Find Scene Cuts
Remove Scene Markers
/ Open Audio Record Window...
•Toggle (Mute) Audio Inputs
•Toggle (Mute) Audio Tracks
•Toggle (Mute) Audio Aux
•Toggle (Mute) Audio Bus
•Toggle (Mute) Audio Outputs
Toggle Current Track Automation Off/Read
Set Current Track to Automation Read
Toggle Current Track Automation Touch/Read
Toggle Current Track Automation Latch/Read
Toggle Current Track Automation Write/Read
Toggle Current Track Automation MIDI/Read
Set All Tracks to Automation Off
ct op co R Set All Tracks to Automation Read
Set All Tracks to Automation Touch
Set All Tracks to Automation Latch
Set All Tracks to Automation Write
Set All Tracks to Automation MIDI
co E Automation Event Edit...
sh F15 Track Automation Settings...
Toggle Automation controlling Volume
Toggle Automation controlling Pan
Toggle Automation controlling Mute
Toggle Automation controlling Send Levels
Toggle Automation controlling Plug-in parameters
Toggle Automation controlling Solo
Toggle Automation Quick Access
Toggle Group Clutch
Open Group Settings...
Write To End
Write To Right Locator
Delete currently visible Automation Data of Current Track
Delete All Automation Data of Current Track
Delete Orphan Automation Data of Current Track
Delete All Automation Data of All Tracks
sh ct R Move Current Region Data To Track Automation
Move Current Track Automation Data To Region
Move All Region Control Data To Track Automation
op co M Move All Track Automation Data To Region
Refresh Freeze Files
•Refresh Audio Configuration
- 75 Audio Hardware Setup
ct \ Audio Configuration
co \ Set Audio Record Path...
Toggle Punch On The Fly
Toggle Auto Input Monitoring
sh ct / Toggle Pre-Fader Metering
sh Space Clear Overload Flag in Audio Channel Display
Toggle Velocity Engine support
co W Close Window
co Esc Close Floating Window
Esc Close Window or Song
Close Song without Save
sh F Select Next Window
sh R Redraw current window
co N New...
Initialize Song
co O Open...
Project Settings...
Clean up Project...
Consolidate Project...
Rename Project...
sh co W Close
co S Save
ct - 1 Save Song as...
Save a Copy As...
Save as Template...
Save as Project...
Revert to Saved...
Page Setup...
co P Print
Import...
Export Selection as MIDI File...
Export Region as Audio File...
Export Track as Audio File...
Export All Tracks as Audio File...
Export Song as OMF File...
Export Song as OpenTL File...
Export Song as AAF File...
Song to FinalCut Pro/XML...
Bounce...
co Q Quit
co Z Undo
sh co Z Redo
Undo History...
Delete Undo History
co X Cut
co C Copy
co V Paste
-117 Clear
co A Select All
co F4 Zoom Window
Tile Windows
Tile Windows horizontally
Stack Windows
Import Audio File...
Next Plug-In Setting
Previous Plug-In Setting
Next EXS Instrument
Previous EXS Instrument
Next Plug-In Setting or EXS Instrument
Previous Plug-In Setting or EXS Instrument
Next Channel Strip Setting
Previous Channel Strip Setting
Copy Channel Strip Setting
Paste Channel Strip Setting
Save Channel Strip Setting as...
Next Channel Strip or Plug-in Setting or EXS Instrument
Previous Channel Strip or Plug-in Setting or EXS Instrument
Plug-in Delay Compensation: All
-------- Various Windows --------
•Show Tools
•Set Next Tool
•Set Previous Tool
W •Set Arrow Tool
R •Set Scissors Tool
•Set Glue Tool
•Set Eraser Tool
•Set MIDI Thru Tool
E •Set Text Tool
•Set Solo Tool
•Set Pencil Tool
•Set Crosshair Tool
•Set Mute Tool
•Set Finger Tool
•Set Layout Tool
•Set Magnifying Glass Tool
•Set Size Tool
•Set Voice Separation Tool
•Set Camera Tool
•Set Velocity Tool
•Set Quantize Tool
•Set Audio Crossfade Tool
•Set Automation Tool
•Set Marquee Tool
sh G Toggle Global Tracks
Toggle Signature Track
Toggle Tempo Track
Toggle Chord Track
Toggle Beat Mapping Track
Toggle Marker Track
Toggle Video Track
Toggle Transposition Track
Hide All Global Tracks
Show All Global Tracks
ct Left Zoom Horizontal Out
ct Right Zoom Horizontal In
ct Down Zoom Vertical Out
ct Up Zoom Vertical In
co F1 •Recall Zoom 1
co F2 •Recall Zoom 2
co F3 •Recall Zoom 3
sh co F1 •Save as Zoom 1
sh co F2 •Save as Zoom 2
sh co F3 •Save as Zoom 3
Zoom to fit Selection vertically & horizontally, store Navigation Snapshot
Zoom to fit Selection horizontally, store Navigation Snapshot
Zoom to fit Locators, store Navigation Snapshot
Store Navigation Snapshot
Navigation: Back
Navigation: Forward
PageUp Page Up
PageDown Page Down
Page Left
Page Right
1/3 Page Left
1/3 Page Right
1/8 Page Left
1/8 Page Right
Home Page Top
End Page Bottom
Page Left-most
Page Right-most
Scroll In Play
sh F4 Hide/Show Transport
Hide/Show Parameters
Hide/Show Toolbox
sh op co G Grid
Plain Background
A Catch Clock Position
Link Window (Same Level)
D MIDI Out Toggle
MIDI In Toggle
M Mute Folders/Regions
F12 Hyper Draw: Disable
F13 Hyper Draw: Volume
Hyper Draw: Pan
Hyper Draw: Modulation
Hyper Draw: Pitch Bend
Hyper Draw: Note Velocity
Hyper Draw: Other...
H Hyper Draw: Autodefine
-------- Arrange and Various Editors --------
co a •Go Into Folder or Region
a •Go Out of Folder or Region
Deselect All
sh ct T Toggle Selection
ct op co F Select All Following
Select All Following of Track
Select inside Locators
Deselect outside Locators
Deselect Global Tracks
sh U Select empty Objects
sh O Select overlapped Objects
op = Select Equal Objects
ct op S Select Similar Objects
= Select Equal Channels
sh = Select Equal Subpositions
ct op co M Select Muted Regions/Events
sh co 1 •Select First
sh co 2 •Select Last
Left •Select Previous Event
Right •Select Next Event
sh Left •Toggle Previous Region/Event
sh Right •Toggle Next Region/Event
- 5 Scroll To Selection
Q Quantize Again
•Quantize: next value
•Quantize: previous Value
sh Q De-Quantize
sh co F Note Overlap Correction
sh co C Note Force Legato
Select Top Line
ct op co Down Select Bottom Line
sh C Lines To Channels
co L Sustain Pedal to Note Length
co F Note Overlap Correction (selected/selected)
ct co C Note Force Legato (selected/selected)
co R Note Overlap Correction for Repeated Notes
•Delete Similar Objects
•Delete but Keep Similar Objects
•Delete and Select Next Region/Event
ct V Paste at original Position
Paste Replace
Erase Unselected within Selection
sh co R Repeat Objects...
J Merge Objects
Split Regions/Events by Locators
sh F5 Split Regions/Events by rounded Song Position
F5 Split Regions/Events by Song Position
ct op co P •Pickup Clock (Move Event to SPL Position)
sh ct P •Pickup Clock & Select Next Event
•Set Region/Event Start to SPL Position
sh \ •Set Region/Event End to SPL Position
ct op + •Nudge Event Position by SMPTE frame +1
ct op - •Nudge Event Position by SMPTE frame -1
sh ct + •Nudge Event Position by SMPTE Bits +1
sh ct - •Nudge Event Position by SMPTE Bits -1
ct + •Nudge Event Position by SMPTE frame + 0.5
ct - •Nudge Event Position by SMPTE frame - 0.5
•Nudge Event Position by SMPTE frame + 5
•Nudge Event Position by SMPTE frame - 5
•Nudge Event Position by Tick +1
•Nudge Event Position by Tick -1
ct op Right •Nudge Event Position by Format +1
•Nudge Event Position by Format -1
•Nudge Event Position by Beat +1
•Nudge Event Position by Beat -1
•Nudge Event Position by Bar +1
•Nudge Event Position by Bar -1
•Nudge Event Position by + Nudge Value
•Nudge Event Position by - Nudge Value
•Set Nudge Value to Tick
•Set Nudge Value to Format
•Set Nudge Value to Beat
•Set Nudge Value to Bar
•Set Nudge Value to SMPTE Frame
•Set Nudge Value to 0.5 SMPTE Frame
•Nudge Event Length by Tick +1
•Nudge Event Length by Tick -1
sh ct Right •Nudge Event Length by Format +1
sh ct Left •Nudge Event Length by Format -1
•Nudge Event Length by Beat +1
•Nudge Event Length by Beat -1
•Nudge Event Length by Bar +1
•Nudge Event Length by Bar -1
•Nudge Event Length by SMPTE frame +1
•Nudge Event Length by SMPTE frame -1
op Up •Event Transpose +1
op Down •Event Transpose -1
+ •Event Channel +1
- •Event Channel -1
P Positions/Time Ruler in SMPTE Units
co U Unlock SMPTE Position
ct op co - 37 Lock SMPTE Position
Snap Mode: Smart
Snap Mode: Bar
Snap Mode: Beat
Snap Mode: Format
Snap Mode: Ticks
Snap Mode: Frames
Snap Mode: QF
sh co D Snap Mode: Samples
Drag Mode: Overlap
Drag Mode: No Overlap
Drag Mode: X-Fade
Drag Mode: Shuffle L
Drag Mode: Shuffle R
-------- Windows showing audio files --------
ct op co W Show file(s) in Finder
-------- Arrange Window --------
Up •Select previous Track
Down •Select next Track
Left •Select previous Region
Right •Select next Region
ct op co D •Deselect All Regions Except Recording Track
•Set Track & MIDI Thru Parameters by Region/Folder
ct op co C Select Equal Colored Regions
Pack Folder
Unpack Folder
Unpack Folder (Use Existing Tracks)
Append Track to Track List
sh - 17 Create Track
sh ct Return Create Track with next Instrument
Create Multiple Tracks...
Delete Track
co D Delete unused Tracks
sh op co D Delete Redundant Audio Tracks
sh co T Tracks for Overlapped Regions
Tracks for Selected Regions
H Toggle Hide View
Hide Current Track and Select Next Track
Unhide All Tracks
Toggle Track Mute
Toggle Track Mute of all Tracks of Folder
Toggle Track Mute of all Tracks With Same Instrument of Song
Record Enable Track
Toggle Track Solo
ct op Down Individual Track Zoom In
ct op Up Individual Track Zoom Out
Toggle Individual Track Zoom
Auto Track Zoom
ct op co - 6 Individual Track Zoom Reset
ct op co T Individual Track Zoom Reset for All Tracks
Make Alias
Make Alias but Copy Folder
Turn Alias to Real Copy
Reassign Alias
Find Original of Alias
Select All Aliases of Region
Select All Orphan Aliases
Delete All Orphan Aliases
Audio Crossfade Options for Merge...
Merge Regions per Tracks
< Snip: Cut Time and Move by Locators
Insert Time and Move by Locators
Splice: Insert snipped part at Song Position
Demix by Event Channel
Demix by Note Pitch
ct op co F15 Empty Trash
ct op co F14 Open Trash
Create New Instrument
ct T Create Trackname
Delete Trackname
Move Selected Regions to track
Adjust Tempo using Region Length and Locators
ct op co O Set Region(s) to Recording Position
Convert Regions to New Regions
Convert Regions to New Audio Files
sh ct co - 37 Adjust Region Length to Locators
Adjust Region Length to Nearest Bar
Strip Silence...
ct op co A Open in Apple Loops Utility...
Copy ReCycle Loop
Paste ReCycle Loop
Search Zero Crossings
ct op co N Normalize
Normalize without Channel
Normalize without Channel & Delay
ct op co Q Apply Quantization Settings Destructively
L Toggle Loop
sh L Turn Loops to Real Copies
Turn Loops to Aliases
Erase Duplicated Events
ct op co X Set Optimal Region Sizes rounded by bar
Set Optimal Region Sizes rounded by denominator
Snap Region Start to Bar
Remove Overlaps
sh Tab Tie Regions by Length Change
op Tab Tie Regions by Position Change
Replace Overlapped Regions
Tie Regions within Locators
Insert Instrument MIDI settings as Events
Erase inside Locators
Erase outside Locators
ct E Erase outside Region Borders
Crop Regions outside Marquee Selection
Remove Groove Template from list
Make Groove Template
Import DNA Groove Templates...
Show Channel Strip Only
sh A View Track Automation
ct D Delay in ms
Region Content
sh op C Instrument Colors To Regions
sh op N Tracknames To Regions
Waveform vertical zoom x 1 (Normal)
Waveform vertical zoom x 2
Waveform vertical zoom x 4
Waveform vertical zoom x 8
ct op co -125 Waveform vertical zoom out
ct op co Up Waveform vertical zoom in
-------- Track &Mixer --------
Toggle MIDI Instruments
Toggle Audio Inputs
Toggle Audio Tracks
Toggle Audio Instruments
Toggle Audio Aux
Toggle Audio Busses
Toggle Audio Outputs
-------- Environment Window --------
New Standard Instrument
New Multi Instrument
New Mapped Instrument
New Fader/Knobs/...
New Keyboard
New Monitor
New Arpeggiator
New Transformer
New Delay Line
New Voice Limiter
New Channel Splitter
New Chord Memorizer
New MIDI Out Port
New Audio Object
Clear Cables only
Clean up Positions
Reset Sizes
ct A Align Objects
sh ct op Left Object move left
sh ct op Right Object move right
sh ct op Up Object move up
sh ct op Down Object move down
Object Width -1 Pixel
Object Width +1 Pixel
Object Height -1 Pixel
Object Height +1 Pixel
Hide/Show Cables
Protect Cabling/Positions
•Toggle Channel Display Default of Multi Instrument
sh ct T Toggle Selection
ct F Select Used Instruments
op G Select Unused Instruments
Select Cable Destination
ct op co / Select Cable Origin
Goto Layer of Object
Goto previous Layer
Send Selected Fader Values
Send All Fader Values except Sysex
Delete Layer
Insert Layer
Cable serially
Apply Buffer Template to Position and Size
Apply Buffer Template to Position
Apply Buffer Template to Size
Apply Buffer Template to Definition
Apply Buffer Template to Definition, channel increment
Apply Buffer Template to Definition, number increment
Apply Buffer Template to Cable(s)
-------- Score Window --------
Page Edit
Explode Folders
ct P Explode Polyphony
Hide/Show Instrument Names
ct op co H Hide/Show Page Rulers
Color View: individual
sh ct F14 Color View: Show Pitch
Color View: Show Velocity
Color View: Show Polyphony
Color View: Force Black & White
sh G Go to Page #...
ct op co V Paste Multiple
•Paste Multiple at original Position
Right •Next Event
Left •Previous Event
Down •Next Staff
Up •Previous Staff
sh ct D Default Syncopation
sh ct F Force Syncopation
sh ct G Defeat Syncopation
ct G Default Interpretation
ct F Force Interpretation
ct D Defeat Interpretation
Stems: default
- 23 Stems: up
- 19 Stems: down
Stems: hide
Stem End: Default Length
sh ct op Up Stem End: Move Up
sh ct op Down Stem End: Move Down
Voice/Staff Assignment: default
Voice/Staff Assignment: staff above voice
Voice/Staff Assignment: staff below voice
Ties: default
ct PageUp Ties: up
ct PageDown Ties: down
B Beam Selected Notes
U Unbeam Selected Notes
Default Beams
Not Independent
co I Independent
co G Independent Grace
Default Accidentals
sh ct 3 Enharmonic Shift: #
sh ct B Enharmonic Shift: b
ct [ Flats To Sharps
ct ] Sharps To Flats
Force Accidental
Hide Accidental
sh co G Guide Accidental
co N Reset Note Attributes
Reset Line Layout
op V •Align Object Positions Vertically
op H •Align Object Positions Horizontally
•Align Object Positions
Split To Channels
ct op co Up •Nudge Position Up
•Nudge Position Down
ct op co Left •Nudge Position Left
ct op co Right •Nudge Position Right
ct op co PageUp Open Score Style Window
ct op co PageDown Open Instrument Set Window
ct op co G Settings: Global Format
ct N Settings: Numbers Names
Settings: Guitar Tablature
Settings: Clefs & Signatures
Settings: Clefs & Signatures
Settings: Clefs & Signatures
Settings: Score Colors
Selection To New Instrument Set
•Partbox: 1/1 Note
•Partbox: 1/2 Note
•Partbox: 1/4 Note
•Partbox: 1/8 Note
•Partbox: 1/16 Note
•Partbox: 1/32 Note
•Next Partbox Symbol
•Previous Partbox Symbol
•Next Partbox Group
•Previous Partbox Group
•Attach Symbol: Fermata Up
•Attach Symbol: Fermata Down
- 47 •Attach Symbol: Staccato
•Attach Symbol: Staccatissimo
- 28 •Attach Symbol: Accent
•Attach Symbol: Strong Accent
•Attach Symbol: Long Accent
•Attach Symbol: Tenuto
sh ct U •Attach Symbol: Up-Bow
•Attach Symbol: Down-Bow
•Attach Symbol: Flageolet
sh ct P •Attach Symbol: Pizzicato
•Attach Symbol: Left Hand
•Attach Symbol: Right Hand
•Attach Symbol: Soft
•Attach Symbol: Heavy
•Attach Symbol: Jazz 1
•Attach Symbol: Jazz 2
•Attach Symbol: Jazz 3
•Attach Symbol: Jazz 4
•Attach Symbol: Jazz 5
•Attach Symbol: Jazz 6
sh ct W Insert: Slur Up
sh ct S Insert: Slur Down
co , Insert: Crescendo
co . Insert: Decrescendo
-------- Event Window --------
Left Scroll to Previous Event
Right Scroll to Next Event
Length as Absolute Position
Local Position
•Numerical Edit of Event Position
•Duplicate Event and Numerical Edit
ct op co E •Copy value to all following events
-------- Hyper Edit --------
Create Hyper Set
Create GM Drum Set
Create Hyper Set For Current Events
Clear Hyper Set
Create Event Definition
Delete Event Definition
Multi Create Event Definition...
Convert Event Definition...
Copy Event Definition
Paste Event Definition
Select All Event Definitions
Protect Values toggle
Auto define toggle
-------- Audio Window --------
Up Select Previous Audio File
Down Select Next Audio File
Show Audio File Details
Hide Audio File Details
Play/Stop Region
ct O Add Audio File...
Add Region
Delete File(s)
Optimize File(s)...
Backup File(s)
Copy/Convert File(s)
Move File(s)
ct F Select Used
ct D Select Unused
ct G Show All Regions
ct H Hide All Regions
sh W Strip Silence...
Import SDII Regions
Export SDII Regions
Create Group...
Delete selected Groups
-------- Sample Edit Window --------
Play/Stop Selection
sh ct Space •Play/Stop All
ct Space •Play/Stop Region
•Play/Stop Region to Anchor
sh ct A •Play/Stop Region from Anchor
Create Backup
Revert to Backup
Save A Copy As...
Save Selection As...
Region -> Selection
Selection -> Region
Left •Goto Selection Start
Right •Goto Selection End
•Goto Region Start
sh E •Goto Region End
sh A •Goto Region Anchor
ct R Create New Region
ct N Normalize
Change Gain...
Fade In
Fade Out
ct Backspace Silence
Invert
ct < Reverse
F7 Trim
Remove DC Offset
Time and Pitch Machine...
ct G Groove Machine...
ct E Audio Energizer...
Sample Rate Convert...
Silencer...
Audio to MIDI Groove Template...
Audio to Score...
Quantize Engine...
Search Peak
Search Silence
-------- EXS24 Instrument Editor --------
Z Select zones pointing to selected group(s)
Toggle Selection
Left Previous Zone/Group
Right Next Zone/Group
Open file selector for selected zone
New Zone
New Group
View: All / Toggle Mode
View: Next Zone Parameter
View: Next Group Parameter
Move Audio files
Copy Audio files
•Backup audio files of all USED and ACTIVE instruments of current song...
•Shift selected zone(s) left
•Shift selected zone(s) right
•Shift selected zone(s) left (inc. root key)
•Shift selected zone(s) right (inc. root key)
-------- Keyboard Input --------
Note 'C'
Note 'C#'
Note 'D'
Note 'D#'
Note 'E'
Note 'F'
Note 'F#'
Note 'G'
Note 'G#'
Note 'A'
Note 'A#'
Note 'B'
Rest
Next note will be sharp
Next note will be flat
Chord Mode
Erase
- 43 Step backwards
- 47 Step forward
Octave 0
Octave 1
Octave 2
Octave 3
Octave 4
Octave 5
Octave 6
Octave - 2
Octave - 1
Octave + 1
Octave + 2
1/1 note
1/2 note
1/4 note
1/8 note
1/16 note
1/32 note
1/64 note
1/128 note
Next three notes are triplets
Next two notes are a dotted group
Velocity 16 (ppp)
Velocity 32 (pp)
Velocity 48 (p)
Velocity 64 (mp)
Velocity 80 (mf)
Velocity 96 (f)
Velocity 112 (ff)
Velocity 127 (fff)
Sustain inserted note(s)
Quantize note starts on/off
-------- Project Manager --------
Up
Down
Left
Right
Scan
Expanded Scan
Scan folder...
Abort scan process
Check for modified or deleted files
Clear scanned data
Save Project Manager data
Install files from...
Toggle find mode
Toggle Scan Paths mode
Set selected folder as display root
Move display root one level up
Move display root to top
Consolidate files of selected Songs...
Add selected files to Audio Window
Find used files for selected items
op co U Find unresolved file references for selected items
Move used files for selected EXS-Instruments...
Copy selected EXS-Instruments and used samples...
Convert selected REX files to Apple Loops...
Set comment 1 for selected...
Set comment 2 for selected...
Show details for selected
Hide details for selected
Move selected items...
Copy selected items...
Start/stop preview
Back
Update file list in find mode
Add selected files to Arrange
-------- Global Control Surfaces Commands --------
Open Setup
Open Setup as Float
Open Controller Assignments
Open Install
sh ct op M Open MIDI Monitor
Open MIDI Monitor as Float
Scan all models
Rebuild Defaults
Learn new Controller Assignment
-------- Setup Window --------
as Icons
as List
-------- Install Window --------
Scan for selected models
Scan all models
Add selected models
(the "old") Quad, 6G RAM Mac OS X (10.4.5) LP 7.1.1, MOTU PCI/2408/1224
Maybe you are looking for
-
I download PDF documents from municipalities, often and from numerous municipalities. They have a scanned image of a form that I need to fill out, I enter my contact info as a text box onto the form, along with other information, but when I save the
-
can we control the flow of the input stream..i.e., In my program i've a while loop in which client reads continuously the input stream from the server. Even after the server stop sending the data,the while loop is waiting for the input stream to read
-
TS4009 iCloud storage on old MacBook Pro
I am currently running Mac OS X version 10.6.8 and cannot upgrade due to my old processor. I have rigged my old Mail program to accept my iCloud emails, but do not have an iCloud button in my Preferences. I recently got the message that I was being d
-
How to add field to standard screen of PNP
hello masters, tell me one thing: - it is possible to add a field that isn't part of PNP logical database to the standard screen PNP. Could someone help me? regards and thanks in advance Mário
-
Interactive Bar/pie chart and line graph, data from excel/text file -urgent
Hi, I have a huge data in excell sheet which keeps updating every month. Data basically consists of service provider and there respective subscribers from various regions of the country over the years. The requirement is to give the viewers an intera