Need for ColdFusion admin for contract job

The general manager of a large Web site in San Antonio is
looking for a contractor to investigate occasional ColdFusion
hangs. Here's what I know:
They have been running CF on two Windows boxes for some time.
Several weeks ago, they upgraded from CF 6 to CF 7. Their stability
problems began about a week ago. It seems that "for no particular
reason," ColdFusion will hang.
They need someone to take a look at the setup of their
servers and see if there is something amiss. If the consultant is
in San Antonio, great. However, they would be willing to consider
allowing the consultant to remote in. If your interested, or for
more information, contact [email protected]
TIA

Isn't it nice to see a good, precise one-liner job ad rather than the same old churned-out corporate bullsh*t that normally accompanies a vacancy description.
Oh wait.
Search and Replace "ColdFusion" for "any other web technology" and you've got yourself an ad for pretty much every job in IT ever written. Doesn't even mention what kinds of coffee are on offer.

Similar Messages

How to enable Fullfillment set menu in the Right click at the line level for a responsibility?, by default it comes for OM ADMIN.

How to enable Fullfillment set menu in the Right click at the line level for a responsibility?, by default it comes for OM ADMIN.
for this responsibility i need to have teh sets enabled. how to do teh same.
similar to OM ADMIN as shown below:
Kindly advice on teh steps. i believe its some menu /function inclusion can you pl share teh pointer.
regards,
bala

AFAIK then there is no way to do that system wide. You can only do that via userChrome.css or an extension like the Menu Editor per profile .You can install extensions globally, but the user will have to enable them anyway. That is not required for userChrome.css code.

I need version 3.6.16 for an at home online job. I am unable to find it anywhere from a secure source. Is there a way to get a link to download it? The ChaCha Toolbar only works with this older version. Thanks!

I need the older version 3.6.16 for my at home based job for ChaCha. Their toolbar only works with this version and they say it is more compatible with this. And I have not been able to find a secure link to download this older version. Can you give me a secure link or is it possible to download this older version securely?

If you only need Firefox 3.6 for just one thing then you may be better off using a portable version of Firefox as it will not impact your Firefox 6.0.2 install. You can install it on hard disk or on a usb flash drive. Firefox 3.6.22 is the current security update as 3.6.16 is old.
http://portableapps.com/apps/internet/firefox_portable/localization#legacy36

Need information on oracle certified security admin for solaris 10

Hi All,
I need some information on "oracle certified security admin for solaris 10 OS".The information what i am looking out is eligibility criteria and within oraganization any tranning provided .
Regards,
Uma Maheshwar.

http://education.oracle.com

CONTRACT JOB POSTING:Custom Installer Project for AIR app

We have a large AIR app which will require a custom installer. If you have experience with Windows MSI installer let me know if you are interested in this contract job and I will provide details.

Joe,
Thanks for your helpful response. I think you're right that the database management steps would happen on app startup after checking a version number stored in the DB.
What I'm wondering, however, is if there's a best practice for managing these incremental changes to the DB. My current direction is to create a class MigrationsManager, that creates an array of class Migration ( with a single migrate() function ) to manage each necessary and incremental change. Meanwhile, a "migrations" table has one column "version" with a UTC timestamp as an integer and is updated on each migration.
Rails does migrations with up() and down() functions on their base migration class, but the down() function isn't applicable since I can't imagine I would be rolling back earlier migrations on a user's DB.
In the end, I guess I'm just fishing of the best way of managing the different scenarios encountered when 3 years down the road you have an audience with all kinds of different versions of your app/db because of differences in how assiduous they were in updating to the most recent version.
- Daniel

There is any need to production certificate for push notification upload on admin panel when our app is on app store ?

there is any need to production certificate for push notification upload on admin panel when our app is on app store ?

there is any need to production certificate for push notification upload on admin panel when our app is on app store ?

Need Help with mysql admin for Mac

Hello all.
I am new to cold fusion and databases all together. Infact I
am doing an online tutorial to get me started, my problem is the
tutorial really just scratches the surface for the mac side and in
some cases sorta explains how to do but no visual help and I am
very visual.
I am searching for software that is really idiot proof to
start my knowledge with then make the transition when I learn more
and more to hard coding. The tutorial suggests Navicat for Mysql
admin and it is nice but he is setting up basic databases in Access
which looks really easy and I am trying to follow along with
navicat but I am just not getting it specifically when it comes to
setting up relationships between tables. Can I use a software like
FileMaker Pro and just convert to mysql or is their other software
that makes it a little more easy to understand how to set up
relationships like access does.
I am totally new to this stuff and I am looking for the
easiest product to use. Thanks again for your help and time.
Chris

As for the database part, before you write your first query,
you should become grounded in the concepts of data modeling. Then
find a good source (book, books-on-line, etc. ) for the particular
"flavor" of SQL used by your database of choice, then start writing
your queries. Data model first (entities, relationships,
attributes), then SQL.
Couple of fairly good online tutorials for data modeling.
Introduction
to Data Modeling and
Data Model
Reference
Master this and you will save yourself many hours of grief,
trust me.
Phil

Need to write start up scrits for weblogic admin server on Linux

Hi,
I am new to weblogic i have Installed wls1035 on Linux Created Managed servers,but i want write start up and stop scripts for weblogic admin server please let me know how to write.
My weblogic server is Running on Linux..please help me its very urgent for me.....

Put something like this into a startAll.py file (excluding the ---):
startNodeManager(verbose='false',NodeManagerHome=localWlsHome + '/common/nodemanager',ListenPort=5556,ListenAddress=localhost)
nmConnect('weblogic','password','localhost','5556','domain_name')
nmStart('AdminServer','/path-to-domain-dir')
nmStart('my_server_1','/path-to-domain-dir')
nmStart('my_server_2','/path-to-domain-dir')
nmDisconnect()
exit()
source /path-to-domain-dir/bin/setDomainEnv.sh
$JAVA_HOME/bin/java weblogic.WLST startAll.py
Similar for stop (stopAll.py):
nmConnect('weblogic','password','localhost','5556','domain_name')
nmKill('my_server_1')
nmKill('my_server_2')
nmKill('AdminServer')
stopNodeManager()
exit()
source /path-to-domain-dir/bin/setDomainEnv.sh
$JAVA_HOME/bin/java weblogic.WLST stopAll.py
You might have issues with the Nodemanager having an autogenerated username and password. That can be fixed like this:
In the AdminServer console, click on Lock & Edit
In the AdminServer console, go to <domain> -> Security -> General -> Advanced and update the Node Manager username and password to use the same values as the WebLogic server.
In the AdminServer console, apply the changes.
Start WLST: $WL_HOME/common/bin/wlst.sh
Connect to the AdminServer: connect('weblogic','password','t3://<adminserver-hostname>:<adminserver-port>')
Enroll: nmEnroll('/path-to-domain-dir')
Exit WLST: CTRL^D
You might also look into customizing the nodemanager's property file:
Edit $WL_HOME/common/nodemanager/nodemanager.properties
StopScriptEnabled=true
CrashRecoveryEnabled=true
StartScriptEnabled=true
For further reading, please take a look at: http://docs.oracle.com/cd/E15051_01/wls/docs103/config_scripting/reference.html
Edited by: 925121 on Apr 3, 2012 2:16 AM

Unable to install "Mavericks" as it asks for my 'Admin Password" and it does not work. Have not used it since I got my iMac in 2008. First upgrade to do so. Any solutions please?

I have a 2008 iMac which had Leopard initially and I have upgraded to each new OS without a hitch. I downloaded "Mavericks" and began the install, it asked me for my "Admin Password" which I have never ever used since I set the Mac up, I have it safely tucked away so entered it, it rejected it each time. Am sort of lost now, as if my "Admin P/W" does not work here can I go from here?
I have seen many others with this problem but so far most of the solutions seem to be for the "log in" or "User" password not the Admin one.
I am running Mountain Lion successfully.
I have my original disks as supplied and also a Snow Leopard install disk.
I have seen some info about fixing this via Lion Recovery partition which I must have due to using Mt Lion.
How can I repair this situation.
Thank you to all those who respond.

Thanks for your reply.
I have visited both the sites you listed but it seems to me that the solutions mentioned are to fix the User or log in p/w's.They do not seem to refer to the admin one again.
I understand about it being just like other user accts but the fixes do not really refer to it only the above two.
I have no problem booting up my Mac, I do not use a log in p/w so my problem is with the Admin p/w that was set up back in 2008. This is what I need to reset etc.
I am quite confused over these pw's as to just what is what and I need to make sure I understand all before I get into deeper trouble following these links.
This Admin p/w that was set up has never been used and is the only p/w I have except for my Apple ID. All previous upgrades only required my user name log in which has no p/w set up.
I hope you can follow me here butI have read so much on this it is becoming very confusing about whcih p/w's are what.

How to find Spool number for a 2 steps background job.

Hi All,
How to find spool number (and also the background job name ) for a 2 steps background job.
in the table TBTCO i can see step numbers but i dont get the spool number. Is there any link between TBTCO and TSP01.
Also after getting the spool number i need to drill down on ALV report. I hard coded the spool number and was able to drill down using BDC and call transaction but when i press back button it is not returning to the ALV report.
Thanks,
Shiva.

Which one creates the spool? (first one I guess)
What kind of spool? (WRITE, sapscript, smartform, pdf...)
Do you use special statements like NEW-PAGE, or other things?
Are you sure that the spools are generated by these jobs? (did you compare the spool generation times and job run dates to be sure...)

BODS 3.1 :SMTP configuration to send email for success or failure of job

Hi.
This is further to this post : http://forums.sdn.sap.com/thread.jspa?threadID=1965129&tstart=0
Thanks to all for the help.
I did not find a complete set of information as things to do (for a person who is new to BODS).
Hence sharing the workflow which works for me when tested on a simple workflow :
Pre-requisite : SMTP service to be made available on the BODS server and port 25 to be opened up.
This is done by the IT dept of the company.
When smtp service is activated and port 25 is opened up, telnet IP address 25 should say, service is available.
Suggestion : create a email group like : bods at company.com which can be used to be used for the BODS JOBs. Which does not prompt for a password. This also is done by the IT dept of the company.
1) On the BODS server :
1) Click open Data Services Server Manager
2) SMTP settings for smtp_to functions :
Add the IP Address of the SMTP server
Add the email address of the sender. Eg. bodsjobs at companyname,com
3)Apply/Restart the server.
2) Login to BODS Designer :
Create a test job :
TRY ==>DF===> Script for success ===> CATCH script for failure
In the script for success : add the following :
print (' IN TRY BLOCK Before email ' );
smtp_to('bodsjobs at abc,com', ' SUCCESS OF JOB : '
|| job_name(),'Job completed successfully ', 0, 0);
print('After Email ');
In the script for Catch add the following :
print (' IN CATCH BLOCK Before email ' );
smtp_to('bodsjobs at abc,com', 'FAILURE OF JOB : '
|| job_name(),
error_number( ) || 'Error message: ' || error_message( ) ||
'check details', 50, 50);
print('After Email ');
Note : In the catch : select all exceptions on the check box.
Save all.
Click on the job and say execute.
The job will run and if it is successful. You will receive the succes mail.
If there is any error in the DF before the catch, you will receive a mail, which says failure.
The above workflow, when tested atleast works for me.
Hope this helps.
Regards
indu

Hi Arun.
Am really not aware as to how to make things work from the console.
I work on windows environment both at client and on the server.
It looks like you got a bit confused on suggestion of a email group account.
I never did anything on outlook configuration for activation of smtp for bods.
I think you should not mess with outlook.
I dont know from the client side how things work.
But i have worked directly on the BODS server where the bods installation was done.
It is relatively very simple to do and to test.
But to even test why you get that error.
All you need is just a email id. Which could be yours ???
Put your email id as the source of email in that box in the job server.
And put only your email id in smtp_to and test it.
Run a test job. If it completes successfully. You will receive a mail.
In the catch, if you have checked all the boxes for error capture,
if the job fails, it would throw a dump of the errors in the email.
Once everything works well and you receive emails for any jobs you are running.
Then you could decide for the source of your email id and for the receipients of your emails of the jobs.
You could put a group id of your team as source. And also in smtp_to script in case you want everyone to receive the alert that the job has been done or it has errors.
Or include only those email ids in the smtp_to whom you feel, should receive the mail.
Hope this idea helps.
Please dont mess with outlook for any smtp activation for bods.
It is not required if you are working on a windows environment.
You just need a email id for testing.
Outlook configuration does not come into picture at all.
if there is any other unix environment involved. I have no idea.
And i really do not know how things would be from a client side to configure.
Server configurations i do from the server.
I did all configurations on the main server machine. Not from the client.
And I have only one job server so i did everything there.
I did not do anything from management console.
I use management console only for monitoring of jobs on a daily basis, the dashboard which gives you details of the data pulled, time taken etc etc.
cheers
indu.
Edited by: Indumathy Narayanan on Oct 22, 2011 8:05 AM
Edited by: Indumathy Narayanan on Oct 22, 2011 8:09 AM
Edited by: Indumathy Narayanan on Oct 22, 2011 8:17 AM
Edited by: Indumathy Narayanan on Oct 22, 2011 8:18 AM

Exit for role determination via exit for scheduling agreement and contract?

Hi..
I have a requirement to fetch the agents in run-time for PO,PR,SCHEDULE AGREEMENT, CONTRACT..
For PO i am using EXIT : - M06E0005
For PR release i am using EXIT :- M06B0001
By using above 2 exits i am getting the agents at run-time...
Same way i need the EXIT for SCHEDULE AGREEMENT and CONTRACT..
if there is any EXIT for this please share with me..
Regards,
Imtiaz Khan

Hi Imtiaz,
Ideally you should have your agent determination logic in workflow itself instead of determinining them in EXIT.
Can you tell me why you are determining agents in exit and how you are making use of it ?
Also let us know how your workflows are getting trigger for all these documents.
Regards,
Ibrahim

Please answer a programming question for an admin

I'm not a programmer (although my interest is growing), so I can't answer this question in a discussion regarding how Win32API w/OLE and COM is SO much better than programming for Unix/OS X applications.
The original discussion was in regards to OS X's superior Unix based security, he devolved to this. Having only begun my venture into programming, his questions are a little above my head at this point. I'm also interested (as an amature programmer), how this would be accomplished in OS X/Unix.
Thanks in advance.
Here's his position:
*(1st entry)*
I have unsed Windows and many flavors of Unix and I have written programs in Assembler, Fortran, Pascal, Cobol, RPG, Smalltak, Basic, PowerBuilder, Delphi, C, C++, C#, Java, and Perl, and I have been programming for over 20 years, so I do have extensive knowledge about programming.
So I have one question for you:
If you had to build a business application that has to allow users to, spell and grammer check, and perform financial calculations, and render the HTML, how would you compare the effort to do this in Windows versus that in Linux, AIX, Solaris or any other Unix operating system?
I can make this business application have these features in ONE DAY on Windows, because COM and OLE lets me, use Word to spell and grammer check, Excel to do the financial calculations, and IE to render the HTML!
I make my living building complex customized business software, and Windows allow me to build these applications by myself in weeks, when it would take me and a team of programmers months to do these same things in Unix because of the lack of an the Win32 API, COM, and OLE, or I would have to BUY third party libraries that did these things, and deal with the licensing, versioning, and vendor problems that go with them, and none of those third party librabries would be close to Word, Excel, and IE in CAPABILITY!
HONESTLY tell me and others reading this thread how you would go about create the customized business application I described above by yourself in a Unix instead of Windows, and tell us how many MONTHS or YEARS it would take you, or how you would have to BUY some other third party libraries to do what Word, Excel, and IE!
Anyone who thinks a Unix has more CAPABILITIES than Windows, has never used Win32API/COM/OLE/.Net, and does not build customized complex business software for a living, because we people that do are the reason that you find some much customized business desktop software for Windows, and so little for any Unix.
I have nothing against Unix, and it is great for simple business tasked server software, but for complex business tasked desktop software Windows with Win32API/COM/OLE/.Net wins hands down!
*(2nd Entry)*
A System administrators view of an operating system and an application developers view are entirely different, and the Win32API/COM/OLE/.NET simply make my job so much easier, and you simply don't understand because you do not have to deal with the "dirty' details of making what a user wants, which is why your definition of "integration" and mines are totally different!
With the spell check you talked about, how will you keep in in synch with the dictionary in Word where the user is constantly adding and removing words?
No, you would have the user to have to maintain two different spell check dictionaries, and you would totally ignore the grammer check requirement!
Cutting and pasting data between applications is simple integration, and not the complex type that I am talking about.
Can you make your application display and use the MacGourmet menus appear in its own window, and to access and use the MacGourmet functionality (ie. search for a recipe) in its own window?
Give me one example of a Unix application that can display the menus of another application, yet alone control its features!
Of course you can't, because you need COM and OLE!
I am quite familiar with different flavors of Unix, but those operating systems do not have the rich API and program integration features namely COM and OLE that Windows has, because it violates the Unix idea of security by process isolation!
Yes that idea of process isolation keeps the operating system safe from malicious code in applications and from one application taking the others down, but you lose the power of programs working together, and you simply cannot build the type of customized business applications that I build by myself, without reinventing the wheel over and over and without having a large team with lots of programmers.
For example, my customers and millions of others spend all day working in Word and Excel, and the Windows idea that I can transparently integrate my complex business applications right in Word and Excel menu, and into their templates and macros, is why third party developers like me prefer Windows over Unix, regardless of how much better security in Unix is.
Do not get me wrong, Java improves business application development on Unix, but unfortuantely it is not feasable to rewrite ever legacy application in Java, and Java does not integrate well with other programming languages.
I used to code business application for both IBM MVS and Sun Solaris, and I never want to go back to those "bad" old days again, once I took the time to learn how to PROPERLY code using Win32API/COM/OLE/.NET!

At risk of feeding the troll I'll wander in here:
NOTE: Since this is an Apple programming boards and I have limited experience programming on traditional Unix systems (and most of that in college) I will confine my answers to the area I know.
If you had to build a business application that has to allow users to, spell and grammer check, and perform financial calculations, and render the HTML, how would you compare the effort to do this in Windows versus that in Linux, AIX, Solaris or any other Unix operating system?
I can make this business application have these features in ONE DAY on Windows, because COM and OLE lets me, use Word to spell and grammer check, Excel to do the financial calculations, and IE to render the HTML!
Note that this scenario assumes the user has Microsoft office installed. The person argues that they don't have to purchase libraries to program but what they are effectively doing is simply transferring that cost to user. I don't have to purchase libraries but everyone of my users needs to. Good for you, very good for Microsoft but bad for your customer - IMHO. OK, I know "But all Windows business users have Office installed already." When it comes free with the system then I'll retract my objection.
Under OS X and Cocoa many of these functions are intrinsic to the system layer and do not require any applications to be installed. Using Cocoa you can write a simple Word processor that has rulers, full font manipulation (including kerning, spacing and leading), Document Save and Load, Printing, Export to PDF as well as spell-checking in under 10 lines of actual code. Adding a custom file type and icon for full system integration will add another 5 minutes to your programing.
In case you think I'm blowing smoke here is a tutorial from 2002 (yes, this has been possible for over 5 years) outlining the 8 line Word Processor build in Cocoa. http://www.stone.com/TheCocoa_Files/What_s_sofunny.html
And yes, Cocoa also includes Webkit so I can add full HTML rendering by dragging in a WebKit window to my user interface. For an experienced Cocoa programmer this certainly sounds like less than a day of programming - in fact it sounds like a good tutorial for a middle-experienced training day or 2 day class in Cocoa.
I won't include the link to the 1 line web browser you can build in Cocoa using Webkit because it's shorter than the description. Feel free to search for it if you want to.
HONESTLY tell me and others reading this thread how you would go about create the customized business application I described above by yourself in a Unix instead of Windows, and tell us how many MONTHS or YEARS it would take you, or how you would have to BUY some other third party libraries to do what Word, Excel, and IE!
BUT this is all done from the stock system that is on every OS X computer not simply those with Office installed. Obviously you'd need to add some features that were more complicated than this - because any halfway decent programmer could turn this stuff out - and polish takes a while but to meet the requirements of the challenge it would take 2 days tops.
Is every *nix programming environment like this? I don't know I can only answer for the system that I have experience with and is the concern of this board. If you really have questions regarding *nix programming then I suggest you find an appropriate board and troll^H^H^H^H^H ask there.
If you're ever serious about programming on the Mac feel free to stop by and actually take a look at it. I think you'll be surprised.
=Tod

A wallet needs to be configured for this instance of Application Express

hi
I m very new to APEX. I could create web service client with wsdl. But when service is on https i get message
"a wallet needs to be configured for this instance of Application Express".
I have created wallet using OWM (10.2.0.1.0) at location c:\del_sometime
Using admin i configured APEX instance settings wallet as
Wallet Path = file:c:\del_sometime
And checked in database too
SQL> ALTER SESSION SET CURRENT_SCHEMA = APEX_030200;
Session altered.
SQL> SELECT
2 APEX_INSTANCE_ADMIN.GET_PARAMETER('WALLET_PATH')
3 from dual;
APEX_INSTANCE_ADMIN.GET_PARAMETER('WALLET_PATH')
file:c:\del_sometime
Any idea whats wrong? I am following steps from http://download.oracle.com/docs/cd/E14373_01/admin.32/e13371/adm_wrkspc.htm#BABFBJEA

also whe I try following i keep getting error failure to open file. I am on XP and file is present with proper permissions.
SQL> SELECT utl_http.request('https://support.oracle.com/',null,'file:c:\del_sometime\') from dual;
SELECT utl_http.request('https://support.oracle.com/',null,'file:c:\del_sometime\') from dual
ERROR at line 1:
ORA-29273: HTTP request failed
ORA-06512: at "SYS.UTL_HTTP", line 1577
ORA-28759: failure to open file
ORA-06512: at line 1

What is the Ideal Production Setup For One Admin and 4 Managed Servers

Dear Experts
I will be starting with production setup including one Admin server and 4 managed servers in one single domain.
I am thinking of creating a single node environment(no clusters) as the machine has following configuration
OS : Windows Server 2008 R2 Datacenter
RAM : 48 GB
System Type : 64 bit
Processor : Intel(Xenon) 4 processors [email protected]
Can you please let me know if this configuration would suffice for the 4 managed servers if i assign Xmx and Xms as 4096 and Heap Space as 1024 to all the Managed Servers.
It is very urgent and i need to convey to the Infrastructure team if harware procurement is required.
We are looking at somewhere around 300 concurrent users(maximum load) and 100(minimum load) at a given point of time.
Please reply ASAP.
Thanks in advance
Edited by: Abhinav Mittal on Apr 23, 2013 7:58 PM
Edited by: Abhinav Mittal on Apr 23, 2013 8:03 PM

Heap size must be calculated according to the applications that are been deployed on each JVM.
With no deployments, you dont need more than 256k for managed servers heap size and 512k for adminserver. As biggest its your heap size, longer will take your garbage collection. And if you can prevent it, better do it.
Kinds,
Gabriel Abelha

Need for ColdFusion admin for contract job

Similar Messages

Maybe you are looking for