Need for Site Cleanup Tool

Other than manually going into a site and searching for obsolete files, has anyone found a way to clean up old images and pages from a site once they are up loaded? A tool specifically designed to compare your active content with your development files and delete obsolete files woudl be a great improvement. The only solution i have found in the short term is to fluhs the FTP and reload the site, which is a mess once your site becomes large or active.

Hi Melani,
Oracle Graphics 6i was available only with Oracle Forms and Reports 6i. It is not available with Oracle Reports 9i. However, for those customers who already have graphs created using Graphics 6i, if they want to run the same graphs in Reports 9i, then they need to install Graphics 6i.
In your case, there is no need to go that path. Oracle Reports 9i comes with an in-built graph tool as you rightly pointed out. All Oracle Reports versions since 9.0.2 have this in-built graph tool. You don't necessarily need version 9.0.4.
You are also right about the time-axis support on the X-axis of Oracle Reports graphs. We are working on providing better time-axis support, but currently it is not perfect.
Oracle BI Beans is an internal Oracle component that both Oracle Reports and Oracle JDeveloper use for creating graphs. You can try using JDeveloper, however, if some feature is not supported in Reports graphs,it may not be supported in JDeveloper graphs as well, because both use the SAME internal component "BI Beans" for creating the graphs.
The upcoming release, Oracle Reports 10g Release 2 is likely to have some enhancements in the time-axis support, and it may be possible to show time data as you want.
Navneet.

Similar Messages

Help needed for ISA Build Tool

Hi All,
Can you give some references from where i can download and install ISA Build tool. Please pass on any step step guide for enhancing standard SAP features.
Thanks,
Uday.

> Hi All,
>
> Can you give some references from where i can
> download and install ISA Build tool. Please pass on
> any step step guide for enhancing standard SAP
> features.
>
> Thanks,
> Uday.
Hi Uday,
If you go to service.sap.com/crm and then go through the documents available for CRM 4.0 or 5.0 you should be able to find the extension and development guide and also the ISA build tool documentation.
Gareth.

Endeca V11 - Need for restarting Endeca Tools Service After Promoting to Production

Hello Friends,
We have setup the process on staging where once the business user(S) promote content, it exports the Workbench content config & Search config to their respective ZIP files, and the production assembler/mdex gets updated... but for some reason, if there is a new page.... added in staging workbench.... prior to export... the new page doesnt appear in production without retstarting the ENDECA TOOLS SERVICE.
Appreciate, all help / ideas?
Regards,
Keyur

Hello Everyone,
We have 2 CAS and 4 Mailbox server that were installed from SP1 and seeing the same issue. This is a clean install still with no mailboxes migrated over as of yet. Opened a case with MS. also ran:
Add-GlobalMonitoringOverride
-Identity Exchange\ActiveDirectoryConnectivityConfigDCServerReboot -ItemType Responder -PropertyName Enabled -PropertyValue 0 -Duration 60.00:00:00
Waiting
for MS to get back and to see how this workaround does. Seems like the original issue was not resolved completely?
Will
post back when we get an update. Changing the DirectoryActiveMonitoringContext.xml and the above workaround do not seem suitable for us. We would like to see a complete resolution for this.
Good
luck!

What is the best app for Maintenance/Cleanup for my mac? Do I need Virus Protection?

What is the best app for Maintenance/Cleanup for my Mac? Do I need Virus protection?

How to maintain a Mac
Make two or more backups of all your files
One backup is not enough to be safe. A copy of a backup doesn't count as another backup; all backups must be made directly from the original data.
Keep at least one backup off site at all times in case of disaster. Backing up to a cloud-data service is one way to accomplish this, but don't rely exclusively on such backups.
In fact, don’t rely exclusively on any single backup method, such as Time Machine.
If you get an indication that a backup has failed, don't ignore it.
Keep your software up to date
In the App Store or Software Update preference pane (depending on the OS version), you can configure automatic notifications of updates to OS X and other Mac App Store products. Some third-party applications from other sources have a similar feature, if you don’t mind letting them phone home. Otherwise you have to check yourself on a regular basis.
Keeping up to date is especially important for complex software that modifies the operating system, such as device drivers. Don't install such modifications unless they're absolutely necessary. Remove them when they are no longer needed. Before installing any Apple update, you must check that all system modifications that you use are compatible. Incompatibility with third-party software is by far the most common cause of difficulties with system updates.
Don't install crapware
...such as “themes,” "haxies," “add-ons,” “toolbars,” “enhancers," “optimizers,” “accelerators,” "boosters," “extenders,” “cleaners,” "doctors," "tune-ups," “defragmenters,” “firewalls,” "barriers," “guardians,” “defenders,” “protectors,” most “plugins,” commercial "virus scanners,” "disk tools," or "utilities." With very few exceptions, such stuff is useless or worse than useless. Above all, avoid any software that purports to change the look and feel of the user interface.
It's not much of an exaggeration to say that the whole "utility" software industry for the Mac is a fraud on consumers. The most extreme examples are the "CleanMyMac," "TuneUpMyMac," and “MacKeeper” scams, but there are many others.
As a rule, you should avoid software that changes the way other software works. Plugins for Photoshop and similar programs are an obvious exception to this rule. Safari extensions, and perhaps the equivalent for other web browsers, are a partial exception. Most are safe, and they're easy to get rid of if they don't work. Some may cause the browser to crash or otherwise malfunction. Some are malicious. Use with caution, and install only well-known extensions from relatively trustworthy sources, such as the Safari Extensions Gallery.
Only install software that is useful to you, not (as you imagine) to the computer. For example, a word processor is useful for writing. A video editor is useful for making movies. A game is useful for fun. But a "cache cleaner" isn't useful for anything. You didn't buy a computer so you could clean caches.
Never install any third-party software unless you know how to uninstall it. Otherwise you may create problems that are very hard to solve. Do not rely on "utilities" such as "AppCleaner" and the like that purport to remove software.
Don't install bad, conflicting, or unnecessary fonts
Whenever you install new fonts, use the validation feature of the built-in Font Book application to make sure the fonts aren't defective and don't conflict with each other or with others that you already have. See the built-in help and this support article for instructions.
Deactivate or remove fonts that you don't really need to speed up application launching.
Avoid malware
"Malware" is malicious software that circulates on the Internet. This kind of attack on OS X was once so rare that it was hardly a concern, but it's now increasingly common and dangerous.
There is some built-in protection against malware, but you can’t rely on it—the attackers are always at least one day ahead of the defense. You can’t rely on third-party "anti-virus" products for protection either. What you can rely on is common-sense awareness—not paranoia, which only makes you more vulnerable.
Never install software from an untrustworthy or unknown source. If in doubt, do some research. Any website that prompts you to install a “codec” or “plugin” that comes from the same site, or an unknown site, is untrustworthy. Software with a corporate brand, such as Adobe Flash Player, must come directly from the developer's website. No intermediary is acceptable, and don’t trust links unless you know how to parse them. Any file that is automatically downloaded from the web, without your having requested it, should go straight into the Trash. A web page that tells you that your computer has a “virus,” or that anything else is wrong with it, is a scam.
In OS X 10.7.5 or later, downloaded applications and Installer packages that have not been digitally signed by a developer registered with Apple are blocked from loading by default. The block can be overridden, but think carefully before you do so.
Because of recurring security issues in Java, it’s best to disable it in your web browsers, if it’s installed. Few websites have Java content nowadays, so you won’t be missing much. This action is mandatory if you’re running any version of OS X older than 10.6.8 with the latest Java update. Note: Java has nothing to do with JavaScript, despite the similar names. Don't install Java unless you're sure you need it. Most people don't.
Don't fill up your disk or SSD
A common mistake is adding more and more large files to your home folder until you start to get warnings that you're out of space, which may be followed in short order by a startup failure. This is more prone to happen on the newer Macs that come with an internal SSD instead of the traditional hard drive. The drive can be very nearly full before you become aware of the problem.
While it's not true that you should or must keep any particular percentage of space free, you should monitor your storage use and make sure you're not in immediate danger of using it up. According to Apple documentation, you need at least 9 GB of free space on the startup volume for normal operation.
If storage space is running low, use a tool such as OmniDiskSweeper to explore the volume and find out what's taking up the most space. Move seldom-used large files to secondary storage.
Relax, don’t do it
Besides the above, no routine maintenance is necessary or beneficial for the vast majority of users; specifically not “cleaning caches,” “zapping the PRAM,” "resetting the SMC," “rebuilding the directory,” "defragmenting the drive," “running periodic scripts,” “dumping logs,” "deleting temp files," “scanning for viruses,” "purging memory," "checking for bad blocks," "testing the hardware," or “repairing permissions.” Such measures are either completely pointless or are useful only for solving problems, not for prevention.
To use a Mac effectively, you have to free yourself from the Windows mindset that every computer needs regular downtime for maintenance such as "defragging" and "registry cleaning." Those concepts do not apply to the Mac platform.
A well-designed computing device is not something you should have to think about much. It should be an almost transparent medium through which you communicate, work, and play. If you want a machine that needs a lot of attention just to keep going, use a PC, or collect antique cars.
The very height of futility is running an expensive third-party application called “Disk Warrior” when nothing is wrong, or even when something is wrong and you have backups, which you must have. Disk Warrior is a data-salvage tool, not a maintenance tool, and you will never need it if your backups are adequate. Don’t waste money on it or anything like it.

What is a good cleanup tool for Mavericks?

What is a good cleanup tool for Mavericks?

Kappy's Personal Suggestions About Mac Maintenance
For disk repairs use Disk Utility. For situations DU cannot handle the best third-party utility is: Disk Warrior; DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption. Drive Genius provides additional tools not found in Disk Warrior for defragmentation of older drives, disk repair, disk scans, formatting, partitioning, disk copy, and benchmarking.
Four outstanding sources of information on Mac maintenance are:
1. OS X Maintenance - MacAttorney.
2. Mac maintenance Quick Assist
3. Maintaining Mac OS X
4. Mac Maintenance Guide
Periodic Maintenance
OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) See Mac OS X- About background maintenance tasks. If you are running Leopard or later these tasks are run automatically, so there is no need to use any third-party software to force running these tasks.
If you are using a pre-Leopard version of OS X, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep. Dependence upon third-party utilities to run the periodic maintenance scripts was significantly reduced after Tiger. (These utilities have limited or no functionality with Snow Leopard, Lion, or Mountain Lion and should not be installed.)
Defragmentation
OS X automatically defragments files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive except when trying to install Boot Camp on a fragmented drive. Malware Protection
As for malware protection there are few if any such animals affecting OS X. Starting with Lion, Apple has included built-in malware protection that is automatically updated as necessary. To assure proper protection, update your system software when Apple releases new OS X updates for your computer.
Helpful Links Regarding Malware Protection:
1. Mac Malware Guide.
2. Detecting and avoiding malware and spyware
3. Macintosh Virus Guide
For general anti-virus protection I recommend only using ClamXav, but it is not necessary if you are keeping your computer's operating system software up to date. You should avoid any other third-party software advertised as providing anti-malware/virus protection. They are not required and could cause the performance of your computer to drop.
Cache Clearing
I recommend downloading a utility such as TinkerTool System, OnyX 2.4.3, Mountain Lion Cache Cleaner 7.0.9, Maintenance 1.6.8, or Cocktail 5.1.1 that you can use for periodic maintenance such as removing old log files and archives, clearing caches, etc. Corrupted cache files can cause slowness, kernel panics, and other issues. Although this is not a frequent nor a recurring problem, when it does happen there are tools such as those above to fix the problem.
If you are using Snow Leopard or earlier, then for emergency cleaning install the freeware utility Applejack. If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the command line. Note that AppleJack 1.5 is required for Leopard. AppleJack 1.6 is compatible with Snow Leopard. (AppleJack works with Snow Leopard or earlier.)
Installing System Updates or Upgrades
Repair the hard drive and permissions beforehand.
Update your backups in case an update goes bad.
Backup and Restore
Having a backup and restore strategy is one of the most important things you can do to maintain your computer. Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. You can never have too many backups. Don't rely on just one. Make several using different backup utilities. My personal recommendations are (order is not significant):
     1. Carbon Copy Cloner
     2. Get Backup
     3. Deja Vu
     4. SuperDuper!
     5. Synk Pro
     6. Tri-Backup
Visit The XLab FAQs and read the FAQs on maintenance and backup and restore.
Always have a current backup before performing any system updates or upgrades.
Final Suggestions
Be sure you have an adequate amount of RAM installed for the number of applications you run concurrently. Be sure you leave a minimum of 10% of the hard drive's capacity or 20 GBs, whichever is greater, as free space. Avoid installing utilities that rely on Haxies, SIMBL, or that alter the OS appearance, add features you will rarely if ever need, etc. The more extras you install the greater the probability of having problems. If you install software be sure you know how to uninstall it. Avoid installing multiple new software at the same time. Install one at a time and use it for a while to be sure it's compatible.
Additional reading may be found in:
1. Mac OS X speed FAQ
2. Speeding up Macs
3. Macintosh OS X Routine Maintenance
4. Essential Mac Maintenance: Get set up
5. Essential Mac Maintenance: Rev up your routines
6. Five Mac maintenance myths
7. How to Speed up Macs
8. Myths of required versus not required maintenance for Mac OS X
Referenced software can be found at CNet Downloads or MacUpdate.
Most if not all maintenance is for troubleshooting problems. If your computer is running OK, then there isn't really a thing you need to do except repair the hard drive and permissions before installing any new system updates.

Powershell script for Use this termset for site navigation in tem store management tool in central admin

can anyone pls point out whats the power shell script for "use this termset for site navigation" in the termstore management tool in my central admin';s manage serv appln-->managed metadata serv appln ->term styore mgmnt tool
i would like to check this "checked" through powershell script
help is appreciated!

Hi,
To check if the term set has been set to be used for site navigation, we need to check the
NavigationTermSet.IsNavigationTermSet property for the term set.
Here is the code example for using PowerShell to get the setting:
$site=Get-SPSite "your site collection URL";
$session = Get-SPTaxonomySession -Site "your site collection URL ";
$termStore = $session.TermStores["Managed Metadata Service"];
$Group = $termStore.Groups[“Group Name”];
$TermSet = $Group.TermSets[“Term Set Name”];
$navTermSet = [Microsoft.SharePoint.Publishing.Navigation.NavigationTermSet]::GetAsResolvedByWeb($termset, $site.RootWeb, "GlobalNavigationTaxonomyProvider");
write-host $navTermSet.IsNavigationTermSet
Best regards.
Thanks
Victoria Xia
TechNet Community Support

URGENT : Help needed for OLAP tools selection

Hi Gurus,
Environment :
Oracle 10g
.net web application with backend as Oracle 10g server embaded with OLAP server.
Application - CRM
Feature requreid - OLAP, OLAP Reporting, Drilldown graphical analysis, US MAP view location specific queries, Ad-hoc analysis.
I have to take a descision for for the OLAP tool selection with above mention client requirement.
* Please let me know if anybody have worked on above combination for the required features and held up with any issue (if any) ?
* Please go thru Oracle options below per feature and let me know is there any issue with .NET and IIS server,Oracle 10g OLAP compatibily ? specially for following points from the below details -
4. OLAP Reporting Tool :
6. Web deployment of Cubes :
8. Graphing :
9. Geographical Map View based query :
1.Extraction Transformation and loading (ETL) Tool : Oracle Business Intelligence Warehouse Builder, tightly integrated with Database Server.
2. Analysis Tool (Multidimensional Data Analysis using cubes) : Oracle Business Intelligence Discoverer·
3. Ad-hoc query and analysis by end User :
Oracle Business Intelligence Spreadsheet Add-in.OLAP DML Regular Sql with OLAP_TABLE Function.
4. OLAP Reporting Tool :     Oracle Reports 10g.
5. Multidimensional Data (Cube) Query Language     OLAP DML : Regular Sql with OLAP_TABLE Function
6.Web deployment of Cubes : Available
7. Cube data export to xls, html, format : Available
8.Graphing : Oracle Reports 10g Graph Wizard for Graphical Analysis.
9. Geographical Map View based query : Oracle Locator: Location-Enabling Every Oracle Database
Please send me the relevent urls in support / issues for the above featues.
TIA,
Sheilesh

The only Adobe program I know that can edit images is Photoshop.
If you have troubles with Google software, you need to post in the appropriate Google forum.

Cisco ASA - 2 Site to Site routes needed for failover -Is possible?

3 physical sites. 2 ASA 5510 (routing mode_). 3rd site is in between ASA sites. 2 different connections. Depending on which link goes down, a certain set of Network Lists for Site to Site VPN is needed to place the 3rd site subnets where they belong depending on which link dies. The tunnels all work. Here is my wonder: Can I automate this somehow in my environment (all Cisco 3750/3560/2960) so that I can leave both tunnels in place so that if either link dies, the appropriate tunnel is picked for failover? Running 8.03 code on ASA. Using EIGRP (love that protocol). Anyone have any ideas?

You can implement failover or loadbalancing . Use this configuration examples for your configurations.
http://cisco.com/en/US/products/ps6120/tsd_products_support_configure.html

TS5376 For about 4 months now I have been getting an Apple I-Tunes update message but when I try to install it, the program stops and refuses to install it saying I need to go to tools and manually install. the support page says:1. Remove iTunes and relat

Dear Windows support personel,
As part of my message reads above; I keep getting an i-tunes update message and when I click on the OK to download it, I get an error message saying there was a problem and I need to go to Tools>manual download. Well, I don't know how to do that even though I gave it my best try. I went to the support sight and it had the following message;
1. Remove iTunes and related components from the Control Panel
Use the Control Panel to uninstall iTunes and related software components in the following order. Then, restart your computer:
iTunes
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Important: Uninstalling these components in a different order, or only uninstalling some of these components, may have unintended affects.
If you encounter an error while uninstalling, try repairing the affected component:
I don't know if I should do that since I'm not PC savey. Could you help me by doing the work on my pc for me? I'd be most apprieciative if you'd help me in this manner.
Sincerely,
Christine Bocker
<Email Edited by Host>

Let's first try updating using an installer file downloaded from the Apple Website:
http://www.apple.com/itunes/download/

Firefox is not remembering passwords for sites that i visit regularly. Ihave checked the box "remember passwords for sites" in the security tab under tools, but the passwords are not being remembered when I return to the sites.

Firefox is not remembering passwords for sites that i visit regularly. Ihave checked the box "remember passwords for sites" in the security tab under tools, but the passwords are not being remembered when I return to the sites. I am running v 3.6.18

Websites remembering you and automatically log you in is stored in a cookie.
* Create an allow cookie exception (Tools > Options > Privacy > Cookies: Exceptions) to keep such a cookie, especially for secure websites and if cookies expire when Firefox is closed.
Make sure that you do not run Firefox in Private Browsing mode.
* https://support.mozilla.com/kb/Private+Browsing
* In [[Private Browsing]] mode all cookies are session cookies that expire if that session is ended, so websites won't remember you.
* Do not use [[Clear Recent History]] to clear the "Cookies" and the "Site Preferences"
Clearing "Site Preferences" clears all exceptions for cookies, images, pop-up windows, software installation, and passwords.
* http://kb.mozillazine.org/Cookies

A site I need for consulting purposes requires an add-on known as "Intranet for Firefox". When one accepts the add-on installation, a return message is displayed claiming that it cannot be found. At this point, I have to use IE to access the site.

A site I need for consulting purposes (http://www.aegtelecom.com.pt/) requires an add-on known as “Intranet for Firefox”. When one accepts the add-on installation, a return message is displayed claiming that it cannot be found. At this point, I have to use IE to access the site. However, being a steadfast Firefox user, I would prefer to use Firefox for this purpose.

http://www.aegtelecom.com.pt/contactos <br />
Have you tried contacting that web site's support department for help with that issue? <br />
If that web site can't find the add-on it says is needed, they need to fix that problem with their servers.
Or you can try using IE Tab2 to run IE in a Firefox tab. <br />
https://addons.mozilla.org/en-US/firefox/addon/92382

How do I add "exceptions" to the "remember passwords for sites" feature in Tools/Options/Security?

I like when FireFox remembers and automatically posts user names and password when I go on to most sites. But there are some I do not wish to automatically be posted. However, when I select "Exceptions" within the Tools/Options/Security/Remember Passwords For Sites pathway, all I can do is see the sites that are exceptions. This facility doesn't seem to allow you to add a site (which would then become an exception). Please advise.

Tools > Options > Security > Passwords: Exceptions
Include those that you do not want to save passwords for, such as those regard banks, credit cards, or other financial institutions.
To remove one already created use the "Saved Passwords" on that dialog,
after supplying master password (twice if you view passwords),
:Select the site and use "Remove" to remove the unwanted password.
:Certainly hope you do assign a Master Password to provide some protection to your passwords.
I like that '''about:permissions''' noted by xr417, it does same as above, but allows you to modify something already in system easier. Don't think I've seen that before. Did a search on bank and found an old account/password -- don't even want an old one there.

RoboHelp HTML Version 10. - OK to use an HTML cleanup tool on RoboHelp topics?

We are considering using a Webtool like www.cleanuphtml.com to clean up the inline html styles in a large number of RoboHelp topics that were imported from Word several years ago. After the cleanup, we can still use the styles from our CSS. Does anyone see any potential problems here? Here's what the Cleanup tool adds to the Head section. It then uses these "internal" styles whereever it needs to clean up the HTML. Thanks - Charlie Kyle
HTML from Cleanup
<head>

<meta name="template" content="OurTopicTemplate.htt" />
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<meta http-equiv="Content-Language" content="en-US" />
<meta name="generator" content="Adobe RoboHelp 10" />
<title>AAANew Topic1 </title>
<link rel="StyleSheet" href="Our_CSS.css" type="text/css" />
<style type="text/css">/*<![CDATA[*/
p.cleanuphtml-13 {
text-indent: -40px;
margin-left: 140px;
table.cleanuphtml-12 {
margin-left: 40px;
col.cleanuphtml-11 {
width: 20%;
...more styles
/*]]>*/</style>
</head>
End of HTML Cleanup

I have not seen any reference to this tool on any of the authoring sites I follow, That does not mean it will not work without problems, simply that there is nothing to go on.
Where I might expect problems in the future is when you amend the CSS or want to apply a new one. The embedded CSS that you have printed will always be in your content. What works today, might work tomorrow and then again...
I understand not wanting to clean up using a good Find and Replace tool but it is the way I would go, with plenty of backing up.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Help Needed For Creating A Game

Hi, I recently decided to make a MMORPG.A game people will enjoy and have fun, I would of course keep it free sense I have play many games that cost 5-15 dollars a month.I have many creative ideas, but I need someone to show me the ropes and teach me how to use Java and i currently looking for a site to download it at.If anyone would care to teach me how to use this or would like to help me create this game(Medievil type game, Swords armor gold houses dragonslaying and plenty more) post here or send me a pm and we can talk more private.
I need:
*A site to download the best possiable Java console
*Helpful tutorial sites
*Or any other sites or tips you think i should know.
Extra Info On Me:
I dont know if this matters or not probably doesnt but I know how to handle and make a site, ive had some dbz rpgs back in the day(kinda rusty but i can manage).
Some more recent information:
I tried game maker and that doesnt seem to helpful.It would only be helpful if I played them 20 bucks which I am not going to do.
Also i am downloading now JS2E 5.0 for Java.
I am stilling waiting on some type of input or even a mentor.

Hi there!
I'm not really a game programmer.. but here's some links anyway.
Someone pointed out this tutorial to me, and I think it is worthwhile:
http://fivedots.coe.psu.ac.th/~ad/jg/
It has stuff on Java 3D, networking, games for mobile phones/PDAs, isometric tile games, etc. It also has an appendix on loaders and Java Web Start.
Also, if you want to create 3D games, you might want to check out
http://www.3dcafe.com/asp/freestuff.asp
They have free 3D models in various formats.
For more 3D links and tutorials try:
http://www.3dlinks.com/
For a 3D tool, I like Anim8or. That it's free helps a lot ;)
http://www.anim8or.com/
And... ms paint!?! You will not be able to draw decent graphics with that. Adobe Photoshop Elements is a nice, low-cost program for 2D images.
There are lots of sites devoted to java game programming. Try the google. Love the google. Google is your friend. ;)
:) jen

Why did Adobe remove the Site Map Tool in CS4?

Is there a better, faster way to wireframe? I could wireframe a prototype 20 page website for testing in about 5 minutes using this tool. I doubt there is a faster way but there is probably a better way. What are some of the best practices on wireframing. Obviously, I am out-of-date if Adobe drops my main tool for wireframing.

iroot wrote:
Obviously, I am out-of-date if Adobe drops my main tool for wireframing.
The original announcement that the Site Map was going to be dropped was made in August 2007, and had this to say:
there are many features in the application that require significant
resources to maintain release to release, but aren't being used with
significant frequency.
That's obviously not much comfort to you, and I'm sorry that I don't have an answer regarding an alternative wireframing tool. However, if you have need for a particular feature in Dreamweaver, it's always a good idea to submit a formal request through the feature request/bug report form at http://www.adobe.com/cfusion/mmform/index.cfm?name=wishform. "Bring back Site Map" is likely to fall on deaf ears, but "provide a simple wireframing tool for site development", with an explanation of how you envisage it working and the benefits it would offer other users, could bring a completely different response.
Good luck in your search for an alternative wireframing tool. If you find one, post the details back here for the benefit of others in a similar position to yourself.

Need for Site Cleanup Tool

Similar Messages

Maybe you are looking for