Need G4 Powerbook power supply replacement. Help?

I need a replacement for my G4 Powerbook power supply. My currrent one (over 2.5 years old) has a 'short' in it. Can anyone recommend where I can find either resonably priced:
1) A factory 'Apple' powersupply exatly like the one I have or
2) A '3rd party' powersupply.
Thanks!

Not cheap - but i have a kensington adapter that includes connectors for AC, Car DC, and airplane power sockets.

Similar Messages

Hello i Have a xserve that needs a new power supply can anyone help

Hello i Have a xserve that needs a new power supply can anyone help

XServe Power Supplies are readily available, either through Apple support or from a variety of third parties:
You don't mention which XServe model you have, which may change things, but these might be good starting points:
http://www.welovemacs.com/xserve.html
http://store.apple.com/ie-business/product/MA945ZM/A
http://www.google.com/search?client=safari&rls=en&q=xserve+power+supply&ie=UTF-8 &oe=UTF-8

PowerMac G5 Power Supply Replacement _ Sharing some information

I thought I might share my experience here with the recent replacement of the 600w power supply on my DP 1.8 G5.
Like many who have experienced the failure, the loud cap gun like sound when the PS failed was a sound I didn't want to hear.
Because this system is the workhorse of my business it was imperitve that we ether got it back up and running or replace it. After a quick call to Apple, even though the system is out of warrenty, I realized this was going to be an in house repair, one because of the cost invloved, and two because of our time frame.
My thought was how bad can a power supply replacement be? We replace them all the time on our Web Servers and other Linux based systems.
To those of you that have done this G5 repair I'm sure you are snickering about this time.
We were able to locate a new power supply and had it over nighted. To those of you ready to tackle the job here is our experience:
1. Remove the fans, both the front and rear.
2. Pop off the covers on the processor heat sinks so you can get to the allen head screws that hold the processors in place. ( Yes you have to pull the processors to remove the power supply) Make sure you have a 2.5mm allen head driver with at least a 5.5" shank so you reach the screws that hold the processor in place.
3. Mark the processors, A or B, top or bottom, you want them going back in the same slots.
4. Once you have loosened the screws (leave them in the posts, no need to pull them out) pull each processor straight up. Don't wiggle them or rock them, you don't want to bend any pins.
5. If you have the lower RAM slots filled I would pull the RAM, you'll need the room to get the Power Supply cover out of the way. Again be sure to mark the modules so there is no mismatch.
6. Remove the 2 screws that are holding the PS cover in place. I found that if you lift the front of the plate up and then slide it to the front, it clears the case. It IS tight to remove this cover, be careful not to jam it against the logic board. I also found its flexable so I could torque it a little from the middle to pull it out.
7. Remove the 4 screws from the bottom of the case, they hold the PS in place.
8. Remove the 3 connections from the logic board.
9. I found that with the case laying on its side, I tipped the power supply up horzontialy towards the top on the case, and then it lifted stratgit out.
10. Pop the new in the samew way the old one came out, and make the connections to the logic board. The front connection is a pain because the pig tail isn't all that long, so you end up doint it with one hand.
11. Reinstall the 4 screws on the bottom of the case, and reinstalled the PS cover using 2 screws.
12. Put you processors back in place, first the top and then the bottom, be careful here, you don't want to bend any pins, line up the posts and push straight in, you'll feel it seat itself. Tighten up the screws. Don't overtighten these they need to be snug.
13. Replace the ram, and the top covers for the heat sink and your fans.
At this point you should be all set, replace the dust covers close up the case and fire it up and all should be well.
We of course cleaned up the case before replacing the PS and we DID run into a problem with the top processor not seating properly. When the machine booted we got to a gray screen and that was it. I suspected a processor wasn't seating properly and when I pulled the top processor I found a piece of dust between the pins. Of course when I removed the dust I bent a pin, and spent the next 20 minutes realigning it it with a safety pin. I know bad idea but I was desparate. We got incredibly lucky with the alignmnet and the machine booted and has been running like the bear it is.
We have built and service a lot of machines over the years, and I have to tell you pulling processors to change a PS just doesn't make a lot of sense to me. I also have to take issue with the unavailability of information from Apple. I KNOW they want you to use their services but not all of us are in the position to lay out 250 for a PS and another 300 for labor and wait 10 days:)
I was in touch with a couple of people I know that stated when they pull the PS they also pull the logic board. I didn't find that to be necessary in our situation.
Like always when you open the case take the necessary precautions with static discharge and electrical hazards.
Hope this helps somebody out there, I know there wasn't a whole lot of info I found for the task in detail.
G5 Mac OS X (10.4.8)

You really need to call Apple and ask about your particular machine. Sometimes Apple will still honor the extended warranty if it applies, even if you're beyond the expiration, and your machine might fit a narrow set of circumstances that doesn't apply to everybody else.

I need a monitor power supply for HP2711X. Where can I buy one?

I need a monitor power supply for HP2711X. Where can I buy one?
This question was solved.
View Solution.

Because the XP597A3 (actually any of these product numbers; XP597AA, XP597A3, XP597AS) is a HP 2011x 20" LCD/LED widescreen monitor. The OP was looking for an A/C adapter power supply for the HP 2711x 27" LCD/LED widescreen monitor, which is product # XP600AA or XP600A3. The adapter power supply I linked to, is the correct part for the 2711x monitor.... that is why not those other parts.
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

Fan & Power Supply Replacement Kit from 2003

Hi All,
I was so excited to finally retire the G4 500 and replace with a shiny used G4 1.42 Dual. Unfortunately, I never botherd to learn about the "WIND TUNNEL" effect.
I know Apple offered a free Fan and Power Supply Replacement Kit back in 2003 that is no longer available (through Apple), but surely some wise Capiltalist Mac Reseller out there must be offering the same solution for a handsome fee.
Can anyone offer a URL?
Thanks!
J
G4 1.42 Dual GHz Mac OS X (10.4.7)
G4 1.42 Dual GHz Mac OS X (10.4.7)

Hi
I could be wrong, but I was under the impression the original MDD G4s suffered from the worst noise and Apple addressed the issue as best they could in the FW800 G4s (including the dual 1.42) and the rereleased MDD 2003 G4.
Verax sell a quiet MDD cooling kit:
http://www.verax.de/verax.php?template=catalog_entry&entryid=44

Hi i am from ireland and moving to canada i want to take my apple imac is this possible or do i need a new power supply?

hi i am from ireland and moving to canada i want to take my apple imac is this possible or do i need a new power supply?

A gentle reminder. Unless you will be permanently resident in Canada and have a Canadian based banking/credit card arrangement you may not be able to buy from the Mac App store or iTunes.

Mega 651 Power Supply Replacment..

Hi Everyone,
Where on earth do you find a power supply replacment for the Mega651. I've tried tracking it down from FSP Corp. (manufacture sticker on supply) and countless websites but can't find one anywhere...Anyone?
Thanks!
Steve

Hi Pico,
have a look at this post :
The definitive(?) guide to replacing the MSI Mega PSU
it may be of use

Help!!! in need of advice power supply is dead

Hey everyone i need some advice, i live in the uk and i have a 2 year old mac book pro and the power supply cable has heated so much that it has melted and stop working, what should i do?? should i just buy a new one or complain to apple and try to and get a replacement ??

This has happened to me before.
Just take the power supply and your laptop to your apple store (make an appointment at the genius bar) and they'll swap it out free of charge as long as ur still under warranty (or apple care)

SEARCHING FOR TUNSTEN E POWER SUPPLY REPLACEMENT

I am working here in Baghdad, Iraq and need to know where to purchase a replacement AC adapter.
Type is PalmOne SAC MODEL R3W005-500
PALM PIN: 163-5877A-US
INPUT: 120VAC 60HZ 100MA
OUTPUT: 5.5VDC 500MA
ITE power supply I think the power supply was plugged in to 220 by accident. However, I do have a universal which works some but only charges at 4.5 volts. I would like to replace old one. But do not know where to go. I am sure I will have to purchase online.
Post relates to: Tungsten E

Hello and thank you for using the Palm Help Forums!
I was unable to locate a charger on our website but I was able to locate the charger you need on a different website. http://www.gethightech.com/Merchant2/merchant.mvc?Screen=PROD&Product_Code=CL-920&Category_Code=CC
This is for the Tungsten E device you currently own. I hope this resolves your issue.
-Pat

M78 power supply replacement

Hi,
I need to replace one of my business' desktop PCs and I'm thinking about getting a an M78 (2111C3U) model.
I read online where the power supply has a proprietary connector, so I was wondering if anyone has the part number or knows what a replacement will cost.
My reason for asking is that I had a Dell lap top once with a proprietary power supply that went bad. It turned out to be a very common problem that even caused a few fires. Dell would not work with us for a reasonable solution (lap top was out of warranty) so I'd like to know in advance what I'm getting into if I go with this power supply.
My bad experience with Dell was 6 PCs ago. As result, I've been Dell "problem-free" for a while now and I've really enjoyed it.
thanks

The hardware maintenance manual may be of help to you:
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/thinkcentre_pdf/m78_hmm.pdf
From what I've seen, Lenovo business-focused systems, the ThinkCenter, are more reliable than the average consumer system.

Protective cap supplied on powerbook power supply (the little clear one)

Hi
I have managed to loose the little clear plastic cap that goes on the power supply when it is not plugged in to the powerbook.
As I want to keep everything clean and dirk free, I am after a new one.
Any ideas where (in the UK) I can get a replacement?

Cheers for the help, sorry about the time delay in the thanks, but have been kept away from the net with the day job..

G4 Dead. Do I need a new power supply?

Recently I tried to start my G4 and nothing happened. NOTHING. The day before I had shut it down using "Shut Down" and it hadn't shown signs of anything being wrong. Yes, it is plugged in.
Does this mean my power supply suddenly died?

I have been messing with my old G4 silver, trying to make it work for the grandchildren. It used to work OK, but the clock had to be reset everytime. Then we didn't use it for about 6 months. Now: Yesterday, I plugged it in and pushed the power button. After some normal-looking gyrations, the screen turned to a black pattern with the message, "You need to restart," which of course did not work. There also was some Chinese (I think) on the screen.
Replaced the battery with one from a friend's computer. Reset the PRAM. Voila, it booted and worked well -- for about 5 minutes. Went black. Would not turn back on.
Took the original battery to the neighborhood Apple shop. It checks out fine.
I put it back in, this time accidentally breaking one of the little plastic side holders. Having now read about the PMU here, I pressed that.
Voila. It booted up, even displaying the correct day and time, and finding the Airport connection. I deleted a few files and was just feeling really good when it went black again. Tried a different outlet. Nothing.
So, is there anything else to try? Is there any hope? I hear power supplies cost $100 or so and must be special ordered (therefore, kids will be home before the computer gets fixed).
I always get the most useful advice in these forums. Hope you can help me this time, too.

Power Supply Replacement!

Good Day!
I bought HP LASERJET PRO 100 COLOR MFP M175 from a Future Shop store in Canada two years ago. A few months ago I left Canada and headed to my home country, with no hope of returning back again to Canada, so I decided to ship the printer with me to use it at home. Unfortunately, unaware of the voltage difference between 110v, North American voltage standard, and the 220v voltage standard in my home country, I plugged the printer cord into the wall and .. boom (you know what happened). A local accredited service center found the power supply out of order, and suggested replacement.
My question is: How can I find HP-certified service center in Montreal, Canada and how much it costs to replace the power supply (warranty is expired)?!
Regards,
Jeffery
This question was solved.
View Solution.

@7kem, welcome back to the forums
I would suggest calling HP directly to inquire about ordering a replacement power supply for your printer.
HP's contact info:
If you are calling within North America, the number is 1-800-474-6836 and if you are calling outside of the US/Canada,: click here.
Best wishes
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Post Power Supply replacement problems

Hello,
I'm trying to resuscitate my PowerMac G5 after a power supply failure and I'm having some issues. I've reached the end of my expertise and so I need to reach out to the community in hopes of being pointed in the right direction.
So here's the series of event that led me to where I'm at right now along with some symptoms:
- My PowerMac G5 Dual 2.0 (june 2004) died in a puff of smoke one day, smelled like burnt plastic. I was pretty sure it was a power supply issue. My computer does not qualify for the Apple extended PSU replacement program. After the death, the power supply would click whenever it was plugged in but otherwise the computer was unresponsive.
- I ordered in a new 600W power supply and replaced the toasted one. I took care to place the CPUs back exactly where they were to avoid having to re-calibrate them.
- I plugged my computer back in with the same configuration minus the second hard drive. The primary hard drive should be bootable.
- The first time I powered it on it had no monitor or keyboard/mouse connected. The fans went off at normal speed, the chime chimed and then the fans went full speed.
- I powered it off and plugged in a keyboard/mouse and monitor and now when I power it on I can hear the fans, then the chime then the CD drive reads a bit of the CD and then that's it. No video.
- It somehow seems to ignore the keyboard and mouse: I can't use the keyboard to reset the PRAM. I can't use the mouse to open the CD tray.
- Powering the computer down requires the "press and hold for 2 sec" versus the immediate power down like when the computer is in Target Disk mode.
- The power status led doesn't flash in anyway at boot, indicating no problem with the RAM, ROM or processors.
- The diagnosis lights inside the mac are not lit until I remove the plastic cover which triggers the default behavior of running the fans at full speed. Then the led lights up.
- I reset the PMU but it didn't seem to make a difference.
- I tried accessing the disk in Target Disk mode but since the keyboard appears to be ignored I don't think the G5 even gets in Target Disk mode. In any case it doesn't mount on the remote computer.
- I notice that the fan on the video card doesn't spin. The video card is an ATI 800XT with a Zallman fan and heatsync installed.
I'd be tempted to say that the video card got fried with the PSU failure but then shouldn't I be able to use the keyboard to reset the PRAM and such ? The fact that I'm unable to do that leads me to believe that perhaps a part of the logic board or the front panel got fried...
How would I go about troubleshooting this without buying a new logic board and front panel ?
Any ideas ?

Going through the exact same issue started about 1.5 weeks ago thinking about giving up and buying a Mac mini for access and snow leopard.

Where can i buy a power supply replacement (UK)

Hi
my power adapter for WRT54GS is broken
I've checked it using a friends power supply (he has the same router)
even though i only brought it early last year so its still under warranty
I missplaced my reciept and cant find it
so Im looking around the internet for a replacement but cant find
any1 know where i can buy 1??
this is whats written on the power adapter:
Model No AD 23/1C
Model No: 12100BS
PRI. :230V~50Hz 100mA
SEC. :12V 1000Ma 12VA
btw im in the UK so need a UK plug
really appreciated any help

You got a problem on you hands . Call Linksys and ask them to see where you can get a replacment

Need G4 Powerbook power supply replacement. Help?

Similar Messages

Maybe you are looking for