Need generic print drivers for HP OFFICEJET 6500A PRINTER-E710A to run on MS Server 2008

I am unable to locate them and do not have the luxury of plugging the printer directly into the server to have windows install a driver. Please help!

Hello-
That is great to hear. I was just installing Server 2008 in my Virtual Box.....
Also, remember a click on the Kudos star to the left is a quick "Thanks" for a helpful post.
Please select the "Accept as Solution" button on the post that best answers your question.
I appreciate your input !
Thank You,
Donald

Similar Messages

How to set Default COPYING for HP Officejet 6500A Plus to DRAFT Quality?

How do I set to Default COPYING quality to DRAFT for HP Officejet 6500A Plus?
This question was solved.
View Solution.

Hi,
Tap Copy on the printer front panel, then tap the Settings button.
Tap Quality and select Draft / Fast.
Tap Set as New Defaults and then select Yes to confirm the changes.
From now on draft quality will be used for copying unless any other quality will be selected.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Need to download drivers for canon MP 280 for macbook pro

I need to download drivers for canon MP 280 for macbook pro how do i go ...

Welcome to Apple Support Communities
As you can see, that printer is compatible > http://support.apple.com/kb/ht3669
To get the drivers for that printer, you just have to add the printer to OS X, following these steps > http://support.apple.com/kb/PH11145 OS X will download automatically the driver for your printer after adding it to the printer list. Or you can download the Canon drivers from the Apple website > http://support.apple.com/kb/DL899
You don't need to get drivers from the Canon website. The Apple drivers are sufficient to make the printer work, although you may find software in the Canon website that you may want

Before I install MX922, do I need to uninstall drivers for MP800 first?

My MP800 is out after many years of service due Error Code 6500. Before I install MX922, do I need to uninstall drivers for MP800? Or just install MX922 as normal? Running OS X 10.10 Yosemite on Mac mini. I want my scanned images done by MP800 to remain on my mac of course. Thanks.
Solved!
Go to Solution.

Hi pmt513,
You don't have to uninstall the drivers for the PIXMA MP800 prior to installing the PIXMA MX922; however, if you would like to, you can reset the printer system on your Mac to uninstall the drivers without removing the scanned images. To do this, please follow these steps:
1. Choose Apple menu > System Preferences, then click Printers & Scanners.
2. Hold down the Control key as you click in the list at the left, then choose “Reset printing system” from the menu that appears. After you reset the printing system, the list of printers in Printers & Scanners preferences should be empty. If your printer is still listed on the left select your printer and then click the minus (-) button to delete it.
3. Restart your Mac.
You can now install the drivers for the PIXMA MX922.
Hope this helps!
This didn't answer your question or issue? Please call or email us using one of the methods on the Contact Us page for further assistance.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

I need all the drivers for Hp15 r007tx windows 7 32 bit

Dear Team,
I have purchased hp 15 r007tx and need all the drivers for it. I have installed windows 7 32 bit on it.Plz give me the link.
This question was solved.
View Solution.

The above images are the sample of error message that i get once i update windows 7 or i reboot after installing a driver. The images are only sample not the actual error messages.

Need Win 8 Drivers for Qosmio X300-14X (PQX31E)

Hi,
I had to format my notebook and i'm in need of some drivers for Windows8 64bit.
Does anybody can give me those?
Device Name: Coprocessore
Hardware ID
PCI\VEN_10DE&DEV_0AA3&SUBSYS_FF001179&REV_B1
PCI\VEN_10DE&DEV_0AA3&SUBSYS_FF001179
PCI\VEN_10DE&DEV_0AA3&CC_0B4000
PCI\VEN_10DE&DEV_0AA3&CC_0B40
Can anybody help me with this?

Hi
Its easy to find out what the devices needs the drivers.
The VEN ID and DEV ID can be checked here:
http://www.pcidatabase.com/index.php
PCI\VEN_10DE&DEV_0AA3
This means the nVidia nForce 730i SMBus Controller
Recommend installing the nVidia Chip Set Utility and nVidia graphic card driver
On the Toshiba EU driver page you can find the version for Win 7. Try it!

Need generic print driver for Officejet 7210 all-in-one on Windows 8.1

Updated my Windows 8 to Windows 8.1, which removed my print driver for an Officejet 7210 all-in-one. Attempted to reinstall. Error that file not found. Followed detailed process to a tee (deleted temp files, removed startup programs, everything). Driver doesn't work but printer does with other computers. Printer is no longer supported and no help (but is in great working condition).
I'm looking for a generic driver that would work with my printer and Windows 8.1. I really appreciate any help...
This question was solved.
View Solution.

Hi LChristofaro,
I have researched your error message and the Msiexec.exe error and it is an issue with windows installer. I recommend restarting your windows installer.
To do this:
1. Run "Services.msc" (without the quotation marks).
2. Double-click "Windows Installer" in the Services list.
3. Click Stop and click OK.
4. Click Start and click OK.
Restart you computer and try the install again.
Let me know if this helped.
Thank you,
I worked on behalf of HP.

Wireless configuration for HP OfficeJet 6500A plus All-In-One printer on Ubuntu 10.04

I have bought a HP OfficeJet 6500A plus All-In-One printer CN557A, which I want to use with ubuntu 10.04 64-bit as a wireless network printer.
Before i bought i checked compatibility on www.hplipopensource.org and www.openprinting.org, and all was in order.
The machine is autodetected and fully functional when connected with a usb cable, but i have not managed to get it to work as a wireless printer.
This is what I did:
I configured the printer on the wireless network (through the printer interface), and it connects. It prints out a "Wireless Network Test Report", and everything works. I can ping to its local ip adress, and access it through the browser. HP eprint also works.
I installed hplip 3.11.10 and dependencies manually. I did this because the default hplip in ubuntu 10.04 did not recognise the device.
I ran 'hp-check', which gave no errors or warnings:
tjoff@mek-403-jakbo-01:~$ hp-check
HP Linux Imaging and Printing System (ver. 3.11.10)
Dependency/Version Check Utility ver. 14.3
Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the
HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies
are installed to successfully compile HPLIP.
2. Run-time check mode (-r or --run): Use this mode to determine if a distro
supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball
has the proper dependencies installed to successfully run.
3. Both compile- and run-time check mode (-b or --both) (Default): This mode
will check both of the above cases (both compile- and run-time dependencies).
Saving output in log file: hp-check.log
Initializing. Please wait...
| SYSTEM INFO |
Basic system information:
Linux mek-403-jakbo-01 2.6.32-35-generic #78-Ubuntu SMP Tue Oct 11 16:11:24 UTC 2011 x86_64 GNU/Linux
Distribution:
ubuntu 10.04
Checking Python version...
OK, version 2.6.5 installed
Checking PyQt 4.x version...
OK, version 4.7.2 installed.
Checking for CUPS...
Status: scheduler is running
Version: 1.4.3
error_log is set to level: warn
Checking for dbus/python-dbus...
dbus daemon is running.
python-dbus version: 0.83.0
| COMPILE AND RUNTIME DEPENDENCIES |
note: To check for compile-time only dependencies, re-run hp-check with the -c parameter (ie, hp-check -c).
note: To check for run-time only dependencies, re-run hp-check with the -r parameter (ie, hp-check -r).
Checking for dependency: CUPS - Common Unix Printing System...
OK, found.
Checking for dependency: CUPS devel- Common Unix Printing System development files...
OK, found.
Checking for dependency: CUPS image - CUPS image development files...
OK, found.
Checking for dependency: DBus - Message bus system...
OK, found.
Checking for dependency: gcc - GNU Project C and C++ Compiler...
OK, found.
Checking for dependency: GhostScript - PostScript and PDF language interpreter and previewer...
OK, found.
Checking for dependency: libcrypto - OpenSSL cryptographic library...
OK, found.
Checking for dependency: libjpeg - JPEG library...
OK, found.
Checking for dependency: libnetsnmp-devel - SNMP networking library development files...
OK, found.
Checking for dependency: libpthread - POSIX threads library...
OK, found.
Checking for dependency: libtool - Library building support services...
OK, found.
Checking for dependency: libusb - USB library...
OK, found.
Checking for dependency: make - GNU make utility to maintain groups of programs...
OK, found.
Checking for dependency: PIL - Python Imaging Library (required for commandline scanning with hp-scan)...
OK, found.
Checking for dependency: PolicyKit - Administrative policy framework...
OK, found.
Checking for dependency: PyQt 4 DBus - DBus Support for PyQt4...
OK, found.
Checking for dependency: Python DBus - Python bindings for DBus...
OK, found.
Checking for dependency: Python devel - Python development files...
OK, found.
Checking for dependency: Python libnotify - Python bindings for the libnotify Desktop notifications...
OK, found.
Checking for dependency: Python XML libraries...
OK, found.
Checking for dependency: Python 2.3 or greater - Required for fax functionality...
OK, found.
Checking for dependency: Python 2.2 or greater - Python programming language...
OK, found.
Checking for dependency: Reportlab - PDF library for Python...
OK, found.
Checking for dependency: SANE - Scanning library...
OK, found.
Checking for dependency: SANE - Scanning library development files...
OK, found.
Checking for dependency: scanimage - Shell scanning program...
OK, found.
Checking for dependency: xsane - Graphical scanner frontend for SANE...
OK, found.
| HPLIP INSTALLATION |
Currently installed HPLIP version...
HPLIP 3.11.10 currently installed in '/usr/share/hplip'.
Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf. Generated from hplip.conf.in by configure.
[hplip]
version=3.11.10
[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/HP
ppdbase=/usr/share/ppd
doc=/usr/share/doc/hplip-3.11.10
icon=/usr/share/applications
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv/hp
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
pp-build=no
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=no
foomatic-drv-install=no
foomatic-ppd-install=no
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=no
internal-tag=3.11.10
restricted-build=no
ui-toolkit=qt4
qt3=no
qt4=yes
policy-kit=no
hpijs-only-build=no
lite-build=no
udev-acl-rules=yes
hpcups-only-build=no
hpijs-only-build=no
Current contents of '/var/lib/hp/hplip.state' file:
# hplip.state - HPLIP runtime persistent variables.
[plugin]
installed=0
eula=0
Current contents of '~/.hplip/hplip.conf' file:
[last_used]
printer_name =
working_dir = .
device_uri = "hp:/usb/Officejet_6500_E710n-z?serial=CN16F2402Q05JW"
[commands]
scan = /usr/bin/xsane -V %SANE_URI%
[installation]
version = 3.11.10
date_time = 2011-11-16 14:30:35
[settings]
systray_messages = 0
systray_visible = 0
[fax]
email_address =
voice_phone =
[refresh]
rate = 30
enable = false
type = 1
[polling]
enable = false
device_list =
interval = 5
| DISCOVERED USB DEVICES |
Device URI Model
hp:/usb/Officejet_6500_E710n-z?s HP Officejet 6500 E710n-z
erial=CN16F2402Q05JW
| INSTALLED CUPS PRINTER QUEUES |
B-403-271-A4-COLOR2
Type: Unknown
Device URI: smb://mek-ps1.win.dtu.dk/403-271-A4-Color
B403-271-A4-BW
Type: Unknown
Device URI: smb://mek-ps1.win.dtu.dk/403-271-A4-BW
HP-Officejet-6500-E710n-z-FAX
Type: Printer
Device URI: hp:/usb/Officejet_6500_E710n-z?serial=CN16F2402Q05JW
PPD: /etc/cups/ppd/HP-Officejet-6500-E710n-z-FAX.ppd
PPD Description: HP Officejet 6500 e710n-z, hpcups 3.11.10
Printer status: printer HP-Officejet-6500-E710n-z-FAX is idle. enabled since 2011-11-16T01:00:45 CET
Communication status: Good
| SANE CONFIGURATION |
'hpaio' in '/etc/sane.d/dll.conf'...
OK, found. SANE backend 'hpaio' is properly set up.
Checking output of 'scanimage -L'...
device `hpaio:/usb/Officejet_6500_E710n-z?serial=CN16F2402Q05JW' is a Hewlett-Packard Officejet_6500_E710n-z all-in-one
| PYTHON EXTENSIONS |
Checking 'cupsext' CUPS extension...
OK, found.
Checking 'pcardext' Photocard extension...
OK, found.
Checking 'hpmudext' I/O extension...
OK, found.
Checking 'scanext' SANE scanning extension...
OK, found.
| USB I/O SETUP |
Checking for permissions of USB attached printers...
HP Device 0x5412 at 002:005:
Device URI: hp:/usb/Officejet_6500_E710n-z?serial=CN16F2402Q05JW
Device node: /dev/bus/usb/002/005
Mode: 0664
| USER GROUPS |
lp adm dialout cdrom plugdev lpadmin admin sambashare vboxusers
| SUMMARY |
No errors or warnings.
Done.
I then ran 'sudo hp-setup', chose the device (which was detected), chose my wireless network, entered the wireless security key. On the configuration results dialog I get two messages:
"Your printer has been succesfully configured on the wireless network. You may now unplug the USB cable"
and
"The Ethernet cable is plugged in which will prevent you from connecting to a wireless network. To connect wirelessly, remove the cable and try again. (VSA000)"
There is no ethernet cable plugged in, so i can't remove it. I unplug the USB cable and click 'finish'. This makes the 'hp-setup'-dialog start over again, and the printer has not been installed.
In the terminal i have the following:
tjoff@mek-403-jakbo-01:~$ sudo hp-setup
[sudo] password for tjoff:
HP Linux Imaging and Printing System (ver. 3.11.10)
Printer/Fax Setup Utility ver. 9.0
Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Searching on USB bus...
GET /IoMgmt/Adapters HTTP/1.1
Host: localhost
User-Agent: hplip/3.0
Content-Type: text/xml; charset=utf-8
Content-Length: 0
GET /IoMgmt/Adapters/Wifi0/WifiNetworks HTTP/1.1
Host: localhost
User-Agent: hplip/3.0
Content-Type: text/xml; charset=utf-8
Content-Length: 0
GET /IoMgmt/Adapters/Wifi0/Profiles/Active HTTP/1.1
Host: localhost
User-Agent: hplip/3.0
Content-Type: text/xml; charset=utf-8
Content-Length: 0
GET /IoMgmt/Adapters/Wifi0/Protocols HTTP/1.1
Host: localhost
User-Agent: hplip/3.0
Content-Type: text/xml; charset=utf-8
Content-Length: 0
error: Missing response key: 'iorotocols-iorotocol-dd:dnsserveripaddress-0'
GET /IoMgmt/Adapters/Wifi0/VsaCodes.xml HTTP/1.1
Host: localhost
User-Agent: hplip/3.0
Content-Type: text/xml; charset=utf-8
Content-Length: 0
GET /IoMgmt/Adapters/Wifi0/WifiNetworks/SSID=mVnmXfsu HTTP/1.1
Host: localhost
User-Agent: hplip/3.0
Content-Type: text/xml; charset=utf-8
Content-Length: 0
GET /IoMgmt/IoConfig.xml HTTP/1.1
Host: localhost
User-Agent: hplip/3.0
Content-Type: text/xml; charset=utf-8
Content-Length: 0
I then tried to reconnect the printer usb cable and run 'hp-toolbox' and click "Wireless/wifi setup using USB". Now i get the error:
tjoff@mek-403-jakbo-01:~$ hp-toolbox
HP Linux Imaging and Printing System (ver. 3.11.10)
HP Device Manager ver. 15.0
Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
HP Linux Imaging and Printing System (ver. 3.11.10)
Wifi Configuration Utility ver. 1.1
Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
error: Channel write error
error: An I/O error occurred. Please check the USB connection to your printer and try again. (Device I/O error)
Done.
I do not how get past this stage, and any help is welcome.
This question was solved.
View Solution.

A friendly soul on ubuntuforums pointed out to me, that the wireless configuration is only necessary when the printer is NOT connected to a (W)LAN. So all I really had to do was to configure the printer in the CUPS administation page, and it worked. Problem solved. Silly me.

I have an HP mini 210-214 dxpc want to install drivers for hp officejet G85 printer

Help I'm at wits end I need driver (s) for hp officejet G85 all in one printer installed in my hp mini 210-214 dxpc with an upgraded windows 7 ultimate os in it.i've done everything i can find on hp website, the wizard finds the printer but no driver, windows can't find the driver, hp says its in my os already as a __os driver i cant find it or get this going been doing this for10 hrs now please somebody make it simple for me to install the necessary driver or whatever it is i need to do to get this printer operating from my laptop. oh this is through a usb connection if you need to know that.
thank you for helping

Hi @GoddessDiamond,
Welcome to the HP Forums!
I understand that you are trying to install drivers for your HP Officejet G85 printer on Windows 7. I am happy to help!
Please take a look through this installation guide, Installing the Printer Driver Using the Windows 7 Built-in Solution for a USB Cable Connection.
Otherwise, if that does not work, you can try to download the Windows XP driver, HP Officejet Basic Software and Driver, and run it using compatibility mode. Make older programs run in this version of Windows.
If neither of those two options work, then the last step is to try an alternative driver, please see this post, How to Assign Alternate Print Drivers in Different Versions of Windows, by @Shane_R.
Hope this information resolves your issue, and have a good day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Need the latest drivers for a Deskjet 895Cse inkjet printer

I wanted to download and install the latest drivers for an HP Desket 895Cse inkjet printer but the only driver updates that are available on your website are for an HP Deskjet 895Cxi. I've never owned an HP Deskjet 895Cxi inkjet printer; only the HP Deskjet 895Cse inkjet printer. Do these two models use the same set of drivers or does your website no longer offer updated drivers for an HP Deskjet 895Cse inkjet printer?
I'm planning to address various sized envelopes for Christmas cards which I have done in the past using my older model HP Deskjet 895Cse inkjet printer because my current HP printer; an HP C5280 Photosmart All In One inkjet printer will not allow me to print on odd sized greeting card envelopes; only standard sized business envelopes like a No. 10, No. 11 and a No. 12.
Last night I ordered new inkjet cartridges for my Deskjet 895Cse inkjet printer; a #23 color cartridge and a #45 black cartridge; both cartridges set me back about $70.00 after applying discounts and using a promo coupon code from HP. I spoke to someone in tech support overseas yesterday who advised me to download the most up to date drivers for my Deskjet 895Cse inkjet printer before I install the new cartridges and begin to address my Christmas card envelopes; about 75 envelopes; front and back.
If there are no new drivers available for my Deskjet 895Cse inkjet printer should I plan to return my new HP inkjet cartridges once I receive them because if my Deskjet 895Cse inkjet printer will not allow me to print on anything unless I install the latest set of drivers for my Desket 895Cse inkjet printer and if there are no new drivers currently available on your website I might as well return my newly ordered cartidges as soon as I receive them by Fedex from HP and get my $70.00 back. Feedback on this would certainly be appreciated.
Stevoreno
12/10/13

Why doesn't the website list the latest drivers for an 895Cse? Was the Deskjet 895Cse inkjet printer released for sale to the public before the Deskjet 895Cxi inkjet printer or visa versa? Basically what's the difference between the 2 models? Finally if I were to install my new cartridges which haven't arrived yet and choose not to install the drivers for the 895Cxi model will my 895Cse printer still work and be able to print?
Stevoreno
12/10/13

Error on installing drivers for HP Officejet 4500 G540n

After changing the printer cartridges in the printer it would not print, saying that the print spooler was not running. After several attempts to restart spooler, I uninstalled the print drivers, and then tried to reinstall them. I was given an error 'The remote procedure call failed' and was unable to finish the installation. How can I fix this problem.

Hello there Lee-J,
Welcome to the Forums
I noticed your post about the issue you are having installing your Officejet 4500 G510n.
I would like to do my best at helping you with this issue, however, I would need to know your Operating System so I can research this for you.
Please respond with your OS and I will look into this.
Thanks,
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Need driver (*.inf) files for HP OfficeJet 5610 All-in-one

I am setting up a print server and it needs *.inf driver files for my HP OfficeJet 5610 All-in-one printer. Where can i find them? I've installed the drivers on my PC, but they come as *.exe files that will not extract to give the *.inf files. Can anyone help?

Hello, First I would like to say that I dont like what HP does, I dont want all your software cloging up my computer. What I want if for the hardware I have purchased from you to work the way I want to. Nothing more nothing less. Please give your customers the chance to pick the software they want and not fill up the pc with trash.
PlanoStar You will find the x86 inf file in the Windows XP Package, it about an 68mb download, just extract EP-CDB-enu_NB.exe using Winrar.
And ofcourse after the hours spent, with HP trolling you, you would think you are done. Think again. Microsoft will pick up the tradition with some Install x86 Medea ntprint.inf BS. to solve this problem download the files needed from here.
It will save you hours instead of mounting AIO images and whatever.
Ps. I have just registered with HP with the sole reason of making this post, and I would just like to say that hp support is rubbish.

Windows 8 does not recognize drivers for HP Officejet 6500 E709a Series

I have downloaded drivers for windows 8 for my HP Officejet 6500 E709a Series printer, but the windows 8 system does not recognoze them.

Hi,
What is the error message ? Where do you download from ? the following file or a different file ?
http://ftp.hp.com/pub/softlib/software12/COL31304/mp-110035-1/OJ_AIO_6500_E709_Full_Win_WW_140_408.e...
Please download the above file then install again.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

I Need Scan/Fax Drivers for an OKI mc160

I have 13" alum. MacBook running OS X.6 and a new OKI mc160 Multifunction gizmo (a scream'in deal). The OKI print driver works well but OKI does not have scanner & fax drivers for my Mac/OS combo. Does any one know where I can find both scanner & fax driver(s) that will work? Help will be greatly appreciated.

Hi mcubed33,
Welcome to the Support Communities!
The article below may be able to help you with this. Click on the link below for more information:
OS X: Printer and scanner software available for download
http://support.apple.com/kb/HT3669
Apple delivers third-party software for scanners and printers using Software Update. To set up your printer or scanner, just connect it to your Mac. If software is needed and available, OS X automatically downloads and installs it.
This article is a comprehensive list of currently supported printer and scanner models and associated software provided by third-party vendors as of 23 January 2014.
OS X Mavericks: Set up a printer
http://support.apple.com/kb/PH14143
Cheers,
- Judy

Need WXP hardware drivers for Satellite L40-139

Hi!
It seems that there are no XP drivers available for the Satellite L40-139.
Could anyone please tell me where I can download drivers for the following devices:
-Satellite L40-139
-Audio device
-Graphics controller
-ACPI controller!
-Some chipset drivers (?) (PCI Subsystem or something)
I should really appreciate any help!
Kind regards!

Hi,
unfortunately there are no drivers available from toshiba at the moment, but you can try using generic drivers from the manufacturers of the hardware
(e.g. if the soundhardware is a realtek soundcard then download drivers from www.realtek.com and so on..) and run the machine with these drivers.
Here are some link which could perhaps help you:
Video drivers
http://www.laptopvideo2go.com/
http://www.omegadrivers.net/
Chipset drivers
http://www.intel.com
Sound drivers
http://www.realtek.com
I hope you can find the drivers you need..
Greets

Need generic print drivers for HP OFFICEJET 6500A PRINTER-E7​10A to run on MS Server 2008

Similar Messages

Maybe you are looking for

Need generic print drivers for HP OFFICEJET 6500A PRINTER-E710A to run on MS Server 2008