Need give amount 600 for particular shift and particular personal area and this amount need calculated through scheema.
Hi all,
need to give 600 amount to particular personal areas and particular work schedule rule
in my client have so many personal ares and work schedule rules so in this personal areas and work schedule rule. Need give 600 amount some particular personal areas and particular work schedule rule and this amount calculated schema
particular personal areas start dw01,dw02,dw03,dw04........ and particular work schedule rule seklca01,seklca2,seklca03,..........
please help me for this solution feel happy and never forget your help
Thank You,
Raamarao
Use Operation TABLEP0001 VARGBWERKS and TABLEP0007 VARGBSCHKZ accordingly right your logic i.e TABLEP0001
VARGBWERKS
DW01
AMT=600
ADDWT XXXX
Similarly for work schedule rule as well.
Regards
Venkatesh
Similar Messages
-
I lost my iPhone a few days ago and I put it on the lost mode. I don't want to give up looking for it. If a person stole it, is there a way for them to get into it or is it locked? I don't want to give up!!! But if there is a way that they could get in and take over my phone with a new number without me deactivating the iPhone and activating a different phone with my number.
lost mode don't depend of the sim card. If you take your Iphone on Lost mode... anybody can use it with the original card sim or with an other one.
Did you try to localise it ?
But hope that thief don't make a restore of the Iphone... Call your Mobile Operator to try to block the IMEI Number. -
I purchased keynote for my new iPad do I need to purchase keynote for my iMac?
When I try and purchase keynote for my iMac I am told that "you have already
purchased keynote, do you want to purchase it again?" Answer NO. I try to open the
keynote app on my iMac and it asks "do want to buy iWork again?" answer NO. Then the keynote app
closes. What an I to do?Call the apple store you got it from and ask them. Sometimes in the past they've extended the 'no questions asked return' but only Apple can tell you for sure.
-
Hi there, got 3 issues at once....
1) can't download the latest itune version onto my PC (it simply stops, not even an error message)
2) can't access the itune store and in order to fix this i need the latest version - catch 22!
3) one of my ipods isn't recognised by itune, nit sure if because of the earlier problems?
.... thanks
S.Hello SAB7700,
This first article can help get iTunes successfully downloaded and updated, which should restore access to the iTunes Store.
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Once iTunes is successfully updated, the following articles provides steps that can help get your iPod working in iTunes again and the iTunes Store functioning, should the update not resolve these issues
iPod not recognized in My Computer and in iTunes for Windows
http://support.apple.com/kb/TS1369
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
Cheers,
Allen -
Do we need different Oracle lisences for DR Site? If we are using Dataguard
Hi All,PLz let me know if we need separate Oracle lisences for our DR site in different location and are physical/logical Standby's?
Thanx
GaganThis question is best answered by your Oracle sales rep. Depending on what type of agreement you have with Oracle, the answer may vary.
HTH
Srini -
When i double click on a file in AI (CS6) I get the message: Can't open the illustration. There is not enough room for the window. Increase document are and try again
We can't know. We know nothing about your system nor your documents since you haven't told us.
Mylenium -
After importing and rendering images are still very slow to go through and develop. No issues in LR 5.3 which was very fast. Canon,Nikon, Leica and Fuji files all rendering slow. iMac 2.9 ghz 16gb RAM OSX 10.8.5. Catalogs and images are kept on external drives. Drives running fine. Really need a fix on this since I'm norally imported and processing at least 4,000 images per LR Catalog. Is there way to revert back to 5.3? I can't use 5.4 is its current state. Thanks.
Download LR 5.3 and install it
By the way, lots of people have this complaint about LR 5.4, and the advice I give is to use LR 5.3 unless you need one of the new camera models supported by LR 5.4 -
Personal area and EE subgroup of Infotype 01 and 77 are not the same. Help!
Hi All,
Good day.
I read your thread here and I guess we have a common problem. Can I ask for your help?
I run the program RPURACU0 to update the new race and ethnicity data in infotype 77. But why it changed the Personnel Area and Employee Subgroup. Only the race and ethnicity codes should have been changed and not the Personnel Area and Employee Subgroup.
Please help me what causes these discrepancies in data.
Example:
In PA20, enter personnel number 7600634. Personal area = US81 and EE Subgroup = U0. But when displaying infotype 77 the Personal area = US02 and EE Subgroup = U1.
The personal area and EE subgroup of infotype 01 and 77 should be the same. In this example, they are not the same. Please help me to find out what causes this problem.
Please reply asap because this problem should be solved immediately.
Thanks in advance.
CarinaHi GRM,
Thanks for your reply.
I checked the date from the table and I found out that:
P0001-ENDDA not equal P0077-ENDDA
P0001-BEGDA not equal P0077-BEGDA
Please reply asap.
Thanks,
Carina -
Creating Personal Area and Subarea.
To create personal area and subarea, do i maintain them in transaction SM30 ? If yes, is there any reference on how to go about it ?
Hi,
can you be more precise on the requirement i.e. do you want to create Sub Screen (using module pool programing) or do you want to create a maintenanve dilog for the custom table.
Regards,
Raghu -
Default personal area and personal subarea?
Dear All,
How to default personal area and personal subarea in infotypes??
I appreciate your time and reply.
Thanks
SambalHi,
Can you try this....!
you can create the Personal Area&Personal Sub Area in OM through the T.Code-pp01&it gets defaulted in the 0000
I hope it will use..........!
Regards,
Chikky..! -
Hi, I have just brought a new laptop running windows 8 and have installed Firefox. My old laptop was running XP and I didn't have a problem running Firefox on it. I am trying to install Kindle for PC on my new laptop but I keep getting the message "this link needs to be opened with an application". I've never seen this message before on any web browser that I have used. I have "googled" the question and some suggestions are:
> reloading Firefox-no point I've just loaded it
> downloading through Internet Explorer-which I don't want to do as I want Firefox my browser of choice
> Some talk of changing profiles-which I haven't a clue about.
Any help in plain and simple English and assuming I have no prior knowledge (I'm a car driver rather than a mechanic) will be greatly appreciated.
Thanks in advanceI'm not familiar with downloads from the Windows 8 app store. Have you had problems with any other store downloads, or just this one? Is it an option to save the file?
-
I need a replacement key for left shift, DV4 2106tx.
This model is new and i can't find a spare key for the left shift key , the retainer broke and i can't do anything about it right now except asking for help, please tell me where and how can i get the spare key with retainers (i am also ready to buy the whole key set if required). Thank you.
If it is new, have you try calling HP? They may send you a new keyboard.
or
try ebay, such as here
Pavilion DV2922TX, XP-SP3 32bit, Intel T5750 2.0Ghz, Nvidia Geforce 8400M GS with 128MB, 4GB 667 DDR2, 250GB HDD -
Face-time seems to be relatively difficult to configure on my new itouch. I've changed everything on my network to make it work but nada. Seemingly it is not recognizing my password. An error message is returned about my network each time i entered my identification, I am not behind a firewall. Seemingly something is wrong, is anyone having a similar problem?
Back up your current iPad, the restore the new iPad to the backup of your old one. This will transfer your data and settings (see http://support.apple.com/kb/ht2109). After restoring the backup to your new iPad and confirming that you have all yoru data, you can delete the backup from your iCloud account (to free up storage).
You can then restore the old iPad as a new iPad and create a separate iCloud account on it by going to Settings>iCloud and signing in with a different ID. Having separate iCloud accounts will ensure that the data you sync with iCloud remains separate. You will also want to use different IDs on the two devices for iMessage to ensure you don't get each other's text messages. You can share the same ID for iTunes and App store purchasing; it doesn't need to be the same as the ID you use for iCloud.
On your Mac, set up a separate user account for each of you (System Preferences>Users and Groups, click "+" at the bottom of the left sidebar to create a new user account), then sign into your respective iCloud accounts within your user account on your Mac. -
Hello,
I have MacBook Late 2008 (Unibody). And I can't install this firmware MacBook SMC Firmware Update 1.5
Need your help.
ThanksAlso, according the the 1.4 update page here: http://support.apple.com/kb/DL974
It will update the Boot ROM version (on MB 5,1) to MB51.007D.003.
Yet I have (MB 5,1) Boot ROM version MB51.007D.B03. Weird again!
What a mess Apple. Considering how important firmware updates are you'd think they could make this a little clearer.
Anyways, again, I don't think we need it. -
Confusing Application of Archive and Retention Personal Tags and Policies
I created some custom personal tags and applied it to the retention policy assigned to my account and started the managed folder assistant on my mailbox and when I saw the new tags in Outlook, I applied personal tags at the folder level of all of the folders
in my Outlook 2010 profiles by right clicking on each folder, selecting Properties, then selecting Folder Policy, then selected the retention and archive policy I wanted and then clicked OK to save the settings.
After about 15 minutes, I had finished going through all the folders, I went back to look at the folder properties and instead of showing the custom policies I just set, they have "Use Parent Folder Policy" selected on the Policy tab for both Folder
Policy and Online Archive. It looks like the settings are not being saved/applied or they are reverting back to defaults. However, some messages show retention and archive dates and some messages are moving to my archive mailbox.
This is confusing to me, so this looks like it is going to generate a large amount of tech support calls when we roll this out and it will be difficult to explain to end users how this works.
Our retention policy does not contain any default archiving policy or retention policy on the Inbox (the 2 year default was not applied) to our policy. So mail in the Inbox is not automatically moved unless a user applies a personal tag to archive
and delete the messages.
How is this supposed to work and how long does it take for folder policies to be applied from personal tags and then work as expected in Outlook?As for when the managed folder assistant runs, it depends on your Service Pack level. For Exchange 2010 SP1 and later, the retention policies run 24x7 with a throttling policy applied to the Mailbox Folder Assistant. Also, there is no guarantee
that the managed folder process will necessarily finish in the time allotted. In fact, there should be messages on the Exchange server side that document how many mailboxes were processed and I think, how many were not.
For the timing in general, if a tag is applied, my understanding is that with the default settings it could be up to a day, if not longer until things begin processing. It depends on what window you have for retention policies to process, what might
already be in the queue to process next, etc.
For the Start and End date question, my assumption would be that on the day that it is supposed to start, it will be placed in the queue to be processed as soon as possible, The same for the end date.
Hope that helps.
More good resources:
http://windowsitpro.com/blog/workcycles-and-managed-folder-assistant-mfa
http://technet.microsoft.com/en-us/library/bb123958(v=exchg.141).aspx
http://blogs.technet.com/b/samdrey/archive/2011/11/16/exchange-2010-retention-policy-tag-not-available-immediately-after-definition-in-emc.aspx
JAUCG - Please remeber to mark replies as helpful if they were or as answered if I provided a solution.
Maybe you are looking for
-
BIP report published in website
Hello, After a BIP report has been generated, how can we make it available through a link? Scenario: A notification email will be sent to non-BIP users that their requested report is now available and downloadable in this link : "http:/........com" T
-
Whenever I load a .PSD file my layers blend.
Hi Guys, I got this problem with a banner for my client. He designed a banner for an upcomming event wich has 8 slides. He asked me to animate it in flash, sound easy... Right? But I encounterd a problem. When I load the .PSD file (File -> Open -> Al
-
I created a windows service to start a managed server and the services was created successfully and stated. WHen I go to the Weblogic Server Admn console, the server is still showing shutdown. Whenm I try to start it, it returns with error that the
-
Gnome 3.2 suspend with status menu: screen is not locked after wakeup
Locking the screen with gnome-screensaver-command --lock or with the lock screen option from the status menu works fine. However, when the suspend from the status menu is used, although it does seem to go into lock mode before it suspends (the screen
-
I basically want to know if this is normal or not, some real short videos are taking forever to export. For example, I have a sony HD SR-12 recording in HD format, and I had two clips in a final cut sequence that I put together, totaling about 7 minu