Need good instructions for image zoom motion

I have several old FCE2 instructions for keyframe motion instructions but none work to give me zoom + motion of an image. Can anyone direct me to such instructions for FCE4??

Also, for occasions when you just want a general random movement of the images, as in iPhoto slideshows, try Piero's free filter.
It will enable you to give hundreds of pictures the Ken Burns treatment in seconds:-
http://web.mac.com/piero.fiorani/PieroFFCE_Effect/Auto_PanZoom.html

Similar Messages

Need good template for Artist - Must have GOOD instructions

Hi.
I'm not a total Newbie, but I'm looking for a nice template for artists. The important thing is that it has really good instructions for customizing it. I'm not totally new, but I don't have the time to learn right now so the instructions need to be really basic. No "assuming" I already know CSS.
It needs to have the ability to show lots of pictures and blow them up when clicked. I'm willing to pay for it as long as it's doable.
Thanks.

I haven't thought about using Wordpress. I know a lot of people use it. Would there be a steep learning curve going that route?
Any learning curve is subjective. Try it and see if it's a good fit for you.
Wordpress is widely used by novices and experts alike.
Actually, I remember now that I did look into it but found that being on a Mac there were some extra steps involved getting started and I couldn't find explanations or definitions for some of the terms.
There are no extra steps for a Mac compared to a PC that I'm aware of.
Ask specific questions about terms and you'll get specific answers.

I need detailed instructions for scanning to my iMac using my hp desk jet 2540.

I need detailed instructions for scanning to my imac, using the HP Deskjet 2540.

Follow the instructions in this article, http://support.apple.com/kb/ht4505
I double checked and your scanner is supported.

Does anyone have a good link for images I can access for my web development work. I have Adobe Creative SUite 5.5

Does anyone have a good link for images I can access for my web development work. I have Adobe Creative Suite 5.5

In short, NO.
I was hoping that the 7.4.1 update would allow it to work, but it has caused more problems than it is worth.If you do actually get it to work you will see the TC in finder (under Shared) when connected to the internet outside of your home network. What I have found though is that the 7.4.1 firmware update has made using the internet at home almost impossible.
I have tried Hamachi but it is not reliable.
I have settled with Dropbox so my files are synced between my home machine and laptop.

Hi need good suggestion for future

hi experts,
i need good suggestion for my future _
i have 3 + exp as a ABAP consultant,
i am looking for a change, i wish to add some thing to ABAP? but, i couldn't understand what to do? pls help me in this regard..
my skills are : very good in ABAP
vey weak in OOPS.
waiting for good advice
thanks in advance

the future will depends on the OOPS only . for all the companies started working on OOPS only they are upgrading to the oops from the general abap...be aware of that ..
it is better to learn XI or HRABAP it is good for you i think.

Good instructions for making a GCC cross compiler?

Hi
I think this might be the best place to ask this since people probably have been making cross compilers. I am interested in trying to make a cross compiler of GCC targetting Plan9/i386. There is an old 3.0 version of GCC (http://cm.bell-labs.com/sources/extra/gcc/) ported to Plan9.
The thing that confuses me a bit about cross compilers is the use of binutils for the target architecture. How does that actually work? The host OS/architecture would not be able to execute those binaries. It feels a bit like a chicken-and-egg issure and I am not really sure how to get started. I have been trying to read up a bit on the PKGBUILDs for cross-arm but the whole theoretical issue of how to actually get the thing working in the first place is still a bit unclear to me.
Some good instructions/links/help would be appreciated
I could post my temporary PKGBUILD here if people want to help out with the actual build...

A small update to my attempts:
This is my binutils package, it has failed at multiple levels during my attempts. The binutils ported to Plan9 are relatively old so some stuff needs to be patched up to build. Now it fails on not being able to recognize arlex.o . This seems a bit odd I think.
# Adapted from cross-arm-elf, cross-i686-pc-gnu and cross-i686-pc-mingw32
pkgname=cross-i386-plan9-binutils
pkgver=2.11.2
pkgrel=1
pkgdesc="The GNU Compiler Collection - Cross compiler for Plan9 i386 target"
arch=('i686' 'x86_64')
license=('GPL')
url="http://plan9.bell-labs.com/wiki/plan9/porting_alien_software_to_plan_9/index.html"
depends=('glibc' 'zlib')
options=('!libtool' '!distcc' '!ccache')
source=('http://plan9.bell-labs.com/sources/extra/gcc/gnusrc.tgz' \
'bucommh.patch')
md5sums=('39d23b7223b68de4cf333205257112ce' \
'2945c4e40dbcd966217ed1349195e312')
_target=i386-lucent-plan9
_sysroot=/usr/lib/cross-${_target}
build() {
rm -rf ${srcdir}/build
mkdir ${srcdir}/build #starting fresh
msg "building and packaging binutils"
cp -ar ${srcdir}/binutils-2.11.2/* ${srcdir}/build/
cd ${srcdir}/build
msg "cheating broken references to Plan9-ported GNU binutils"
ln -s /usr/bin/ar "${_target}-ar"
ln -s /usr/bin/as "${_target}-as"
ln -s /usr/bin/ld "${_target}-ld"
ln -s /usr/bin/ranlib "${_target}-ranlib"
PATH=${srcdir}/build:$PATH
CFLAGS='-O2 -static'
msg "patching up stuff"
cd ${srcdir}/build/binutils
patch bucomm.h -i $srcdir/bucommh.patch
msg "going back to build directory and start configure"
cd ${srcdir}/build
./configure --prefix=${_sysroot} --bindir=/usr/bin \
--with-sysroot=${_sysroot} \
--build=$CHOST --host=$CHOST --target=${_target} \
--with-gcc --with-gnu-as --with-gnu-ld \
--enable-shared --without-included-gettext \
--disable-nls --disable-debug
msg "fixing some corrupt libraries"
cp /usr/lib/libiberty.a ${srcdir}/build/libiberty/
msg "finally making the actual binutils"
cd ${srcdir}/build
make
make DESTDIR=$pkgdir/ install
# clean-up cross compiler root
rm -r ${pkgdir}/${_sysroot}/share/{info,man}
# needed for gcc build
install -dm755 ${pkgdir}/${_sysroot}/include
this is the bucommh.patch:
81c81
< extern char *sbrk ();
> extern void *sbrk ();
Last edited by W.F.Cody (2011-09-13 18:57:17)

Need disassembly instructions for lid/glass plate of Photosmart 5520 printer to remove dead ants

Forum,
I have ants under the glass of my printer. The ants got very excited and freaked out when I pressed the copy button and the light bar turned on! The ants are dead now as I placed the printer in the freezer for several days in a sealed bag. Now I need a disassembly procedure allowing me to just gain access to the area under the glass plate so I can remove all the dead ants and pupa before they attract any new ants or fungi. I am good at taking apart basic electronic products but I would rather have a step-by-step disassembly precedure if available. The online PDF disassembly instructions for recyclers didn't help because of lack of detail. Of course, I would also like to be able to put it back together in working order. I could just leave the ants to mummify if field disassembly is not a good idea.
Thank you, Duncan

Hi DuncanH,
I definetly wouldn't recommend disabbling the printer. If the printer is still functioning I would let them be.
**If you find this helpful or want to say thanks make sure to click the white star under my name to give me Kudos. **

I need operating instruction for the converter!

I Have just purchased the converter. Now I need operating instructions. Where are they?

A time machine backup that was encrypted cannot be opened without the password.. there is no backdoor.. if you lost the password the backup is useless.
If you mean something else.. try being explicit as to what backup you need a password for and how you think we would know it.

Need good tutorial for J2EE

Hi All,
Can anyone help in out in finding a good tutorial for J2EE.
I wanted to have glimpses of this technology before delving deeply into it.
Also please suggest some good reference books on the same
Thanks
Ankush

I'm afraid there is no quick way of learning J2EE. Of all the people on this forum only a few have truly mastered the framework. I suggest you learn it step-by-step by following the tutorial. Read the introduction to give you a glimpse of the technology and then, dive in....
The way I learned it was by building a three-tier website based on Servlets, JSP and EJB. After a few days/weeks in hell, I had an overview of the technology. I suggest you do the same.
As for book suggestions : stick to the standards. You (almost) can't go wrong with Wrox or O'Reilly.
Success,
Mike

Need install instructions for weblogic on 2008 64bit

Trying to install weblogic 10.1.3.3 on windows 2008 R2 64bit (xeon processor) using Sun JDK 64bit
windows exe installer finished the install without issue, but then the weblogic would not start.. prompts for userID and crashes before prompting for password..
I read somewhere that for sun jdk 64bit you should use the generic jar installer instead of the windows installer..
so I tried it and java -jar installer.jar gives an error that it expecting the path to something
does anyone have any working instructions for the install

Hi,
Try the Planning installation guide for unix at http://download.oracle.com/docs/cd/E10530_01/doc/epm.931/hp_unix_install.pdf
Cheers
John

Re: Satellite A30: Need installation instructions for XP Pro

Dear all,
after a hd-crash i have to install XP on my A30. I cant find the recovery-cd so i bought a new version of XP pro.
Unfortunately i'm not able to find any installation instructions for my modell :(
Only drivers and utilities could be downloaded...
Has anyone experience in insttalling in the right order...i know that toshiba only likes it in their right way ;)
regards
Claudia

Well, the driver installation is very easy.
After successful installation of the Win XP OS in this notebook download all available Toshiba drivers and MS QFEs and install it.
The right installation order would be advisable but its not a bible. So you could try your own install order.
I would recommend installing the chipset utility after the installation of all QFEs from Toshiba page.
Best regards

Need work around for image gallery with password protected URLs

Is there a way to display an image gallery that has password protected URLs?
I can build the image gallery in Siena using an excel table with a list of the images and when I preview the app inside Siena I get the expected credentials prompt from IE, and I enter the credentials and the images load and display with their captions perfectly.
There are 4-6 images in the gallery.
When I publish and produce a store app, the app errors out with can’t connect and obviously fails on
var GenericInitError = "The app could not connect to the server. Please try again later.",
GenericInitTitle = "Network error";
Most likely because Siena wants to preload everything and there is no way with preload to enter credentials.
I am looking for any alternatives that would let me get around this.
TIA
-- Barb Bowman

On Mon, 24 Mar 2014 05:10:01 +0000, Radu Gruian (MSFT) wrote:
>One possible thing to do would be download and embed the images into your app, eliminating the need for password-based authentication.
Nope. The app accesses a group of IP Security cameras. Static images would not
make any sense. And authentication is required. Not negotiable.
-- Barb Bowman

I need simple instructions for setting up hosted home directory

Folks, I am just learning how to use OS X server (10.3.9) in our office. The manuals aren't totally clear.
We have a lot of interns that work on shared documents on several machines. I want them to be able to login into an account on the server (where the shared files will be) and work on them that way.
I am not quite sure how to do this. The server is already set up. I set up a LDAPv3 domain (not sure why I needed to - just following the manual instructions.
Things I don't understand:
- why did I need to setup another domain directory (per the manual's instructions). The local one does show up on our LAN even though workgroup manager says it's not visible to the network. Everyone can see the sharepoint I've created.
- I can't seem to do anything with the Access Control List. I can't put anyone in it.
Please advise.
Tangier

the LDaPv3 is so that if someone isn't on the local subnet of the server they can access their user account. By having a specific directroy domain you can have an address that can be access from anywhere on the network.
It is also there so you can be able to create indivudual user accounts to have the ablitly for users to login to multiple machines and have there home folder located on the server. This allows users to not be restricted to a specific machine but still have access to all their files.
to have the hosted home directories you first need to create a location to have the home directories... then enable sharing on that location. this can be done in the workgroup manager under sharing. Make sure under the "network mounting" you enable use for home directories. Once that is created and set up you will now be able to choose that location for users home directories under "home" in the accounts section.
I don't have much experience using the ACLs sorry... basically for a share folder i make a folder, enable sharing on it in workgroup manager, mount the folder and then drag it to the login items for that group that i want to use that folder. that way when a particular user of that group logs in the share folder will mount and they can have access to the folder with out having to login to the server.
I hope that helps a little and didn't confuse you more... i am still new myself but i have had to set up the individual users and share folders.
ALSO: when having users work with the shared documents... make sure they are coping the files to there local user then copy back when they are done... this will help avoid potential issues with files being opened by multiple people and chances of file corruption.
again i hope that didn't confuse you more
dm

Help! need good configuration for xbox 360 using WRT54GS2.

today i bought the WRT54GS2 to use for my lptop desktop and 360. it works great for my 2 computers but not for the xbox. when i play i have crappy signal and lgg lot. the thing is when i look on the configuration in the xbox it shows 3-4 bars constint. so i tried using this link here to do port forarding and i used myxbox 360 static adress like they said. but im still lagging. im not sure what my NAT settings are set on because i havnt seen a warning yet. so im asking what is the best way to connect to my xbox 360 wireless reciever. my computer is not 5 feet awaay from my xbox so i know the connection is good where i am. so do i need to portforwad or something elese?
in the setup it says my firmware version is 1.0.00 do i need an upgrade? if so please tell me where.
thanks!
Message Edited by caufenkamp on 11-08-2009 11:40 PM
Message Edited by caufenkamp on 11-08-2009 11:40 PM

When you upgrade the firmware on your Router, you need to Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...
For your XBOX you can make these changes on yuor Router as well as on your XBOX. I think it should make the NAT Open on your XBOX.
Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...Leave Username blank & in Password use admin in lower case...
On the set-up tab change the MTU Size to 1365 and click Save Settings...
Click on "Administration" tab and disable the option UPnP and click Save Settings...
Click on "Applications and Gaming" tab and then click on "Port Range Forwarding" subtab...
1) On the first line in Application box type in ABC, in the start box type in 53 and End box type in 3074, leave the protocol as both and under ip address type in 192.168.1.20 and check the enable box, click Save Settings once done...
2) Once you return to the set up page click on the Security tab and uncheck Block Anonymous Internet Requests and click on Save Settings...
3)Click on the Status tab and take note of DNS1 and DNS2 Addresses...
4) Goto the XBox Network Settings and IP Address Settings and select manual IP Settings and assign the following on your Xbox IP Address :- 192.168.1.20, Subnet Mask :- 255.255.255.0, Default Gateway :- 192.168.1.1...
5) Also assign the DNS Addresses on the Xbox, Use DNS1 and DNS2 Addresses you took note off of the router status tab as Primary DNS & Secondary DNS for the xbox...
6) Turn off your modem, router, and Xbox...Wait for a minute...
7) Plug the modem power first, wait for another minute and plug the router power cable, wait another minute and turn on the Xbox and test it...it will connect...

Exporting a Muse site - need folder structure for images

I've got 9 pages and about 100 images. I'd like to keep the images associated with each page in a folder within the Image folder. Is there a way to do that with the Export as html command?

All placed images would export only to the root of the /images/ folder and any files added externally (using Add Files for upload or Link to File option for eg.) would export/publish to the /assets/ folder.
This is by design and there isn't a way to change this behaviour at this time.
Thanks,
Vinayak

Need good instructions for image zoom motion

Similar Messages

Maybe you are looking for