Need guidance for adding a seekbar bar timer!

I would like to add a timer that keeps track of total time and also current time that runs next to my seek bar component for my flash movie. How can I do this? For example: 1:11 | 2:04 ... the 1:11 displays the current time of the movie and the 2:04 would represent the total time of the video.

Wow! It's working. Thank you for so much help. I have a couple of preference questions if you don't mind. Currently the timer is not rounding the numbers to four digits for (minutes and seconds ie 10:33), but it is including the whole number (see attached jpg) is there a way to only display minutes and seconds rather than counting down the whole number without rounding them.
Also the timer works on the initial movie load, but if the user drags the progress bar or plays the movie again the timer doesn't restart - or start over again it stays on the last number entered. Is there a way that it always keeps track of the movies progress regardless of when the movie is loaded.

Similar Messages

User exit/ BADI in f-32 / f-28 for adding application tool bar button

Hi Experts,
There is a requirement, for adding application tool bar button in the Transaction codes F-32 / F-28 / Feba_lockbox. So that while clearing documents with reference document, they can upload the data(Reference Documents) from local file and after the data is fetched for clearing, they need to download the data to local file for verification. If the data is verified to be okay, then they can go ahead with simulation and posting. They need this verification to be done in excel sheet, so need to download the data into local file.
I found a BADI in that screen is BADI_LAYER but I don't think it is relevant.
Any help is apreciated!
Is there any EXIT ? Because I can not find it too.
Regards,
Nitin

where you did the enhancement?
I have to create the IDOC once Clear docuemnt is created.. It may help me.

I Need Help for the popup message every time I go to safari: "Warning! Old version of Adobe Flash Player detected. Please download new version."???

I Need Help for the popup message every time I go to safari: "Warning! Old version of Adobe Flash Player detected. Please download new version."???

If you are talking about Safari on the iPad, there is no version of Adobe Flash for iOS and there never has been. Clear Safari, close the app and reset the iPad.
Go to Settings>Safari>Clear History and Website Data
In order to close apps, you have to drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
If you are talking about Safari on your Mac, you are in the wrong forum. But I would still clear the cache, quit Safari and restart the Mac.

Need guidance for eDirectory for GroupWise 2014 Installation

Hello,
I am installing GroupWise 2014 on Windows Server 2012. I first need to install eDirectory. This will at first be a test server for now. I don't know what to do for the eDirectory install. The documentation tells us what to do but it does not give a visual example or sample of what to put in. So, it does not make sense to me.
I am including two attachments. One attachment shows my eDirectory installation screen where I am to declare a tree and context, and to create my Admin account. Why do I keep getting a Context Format Error, and what should it look like? Please provide an example for each field shown on the screenshot example. Also, if you need a domain name, let's call it mycompany.com for now. The Windows 2012 server is in Workgroup Mode and it will not be joined to Active Directory.
Thank you.

Hi there,
Originally Posted by jhieb
I am installing GroupWise 2014 on Windows Server 2012. I first need to install eDirectory.
You are aware that with GroupWise 2014 no directory (be it eDirectory or Active directory) is not needed anymore?
Originally Posted by jhieb
This will at first be a test server for now. I don't know what to do for the eDirectory install. The documentation tells us what to do but it does not give a visual example or sample of what to put in. So, it does not make sense to me.
De GroupWise documentation does indeed not go into the eDirectory details. eDir is seen as a different product for which you can find the needed documentation in it's own section.
I'm curious though, are you wanting to install eDirectory because you will need that at a later point in time, or because you think that is required to run GroupWise 2014?
Cheers,
Willem

Need guidance for setting up distribution list

I have OD setup, I have Mailing Lists setup for groups such as IT, Marketing, etc.
The only thing I have not quite figured out is setting up distribution lists for outside senders that can be distributed to LDAP users in OD. I have been searching the forums and have found bits and pieces of data, but cannot yet locate any guidance for getting this setup.
I thought that this would be handled in the /etc/aliases file, but it appears that this only applies to local users.
If someone could point me in the right direction, I would be grateful.

I understand that more than 15,000 photos in a catalogue will degrade Lightroom's performance
100% incorrect false misleading don't listen to this nonsense, people in this and other forums have over 1/4 million photos in a single catalog
I am concerned that several catalogues will be confusing about which catalogue a specific image is in.
Very smart!
What guidance can someone suggest for creating and organizing multiple catalogues?
Use a single catalog, and move towards keyword/caption/metadata organizing rather than folder-based organizing (as much as can practically be done given the time constraints in your life)

Need guidance for fusion web developement

Hi. I am newbie. I am currently using jdeveloper 11.
I have surfed a lot of videos about application developement using oracle fusion web development. Can anybody please suggest some really good books/tutorials/videos for my requirement below.
1. There are lot of tables which I have created for my business. The jsf page should have the feature to view existing/add data to these tables. It should be able to plot graphs.
2. I have created batch files which will send mails. I need to use buttons on the page which when clicked will exectue these batch files. In my previous post, they have asked me to use an ActionListener.
3. I had studied Java programming a long time ago (forgotten almost all of it). Please tell me what concepts of java should i study again so that i can program all these above things into my aplication.
I have until now just built a simple application which allows me to display values from a table in an adf form on a jsf page. I have surfed enough forums, like stackoverflow.com but i am not able to find the answers that i need to these above questions. This forum is my last hope! Please help guys!
P.s : I have glanced through these books,
Jdeveloper handbook 11g, quick start guide to oracle fusion web development.
Regards,
Sachin

Hi,
1.http://docs.oracle.com/cd/E18941_01/tutorials/jdtut_11r2_58/jdtut_11r2_58_1.html
2. why do you need batch files? you can send mails through javax.mail API http://adfblogs.blogspot.com.es/2012/01/sending-e-mail-from-adf-application.html
3.this post resume a lot of resources for training and beginning https://blogs.oracle.com/shay/entry/how_do_i_start_learning_oracle_adf_and_jdeveloper

I need Guidance for SAP Teched for BW

Hi Everybody,
Iam new to this forum.I need some guidance regarding preparation for BW certification.
1.Which books i should read for what topics?
2.How many questions from individual topics we may expect?
3.Any documents that may help in preparing for BPS part.
4.I need some personal plans followed by you to get success in Teched(Your experiences).
Hope all of you will support me in all respects so that i too can achieve certification.
Thanks for your support.
Best regards,
Venu
mail:[email protected]

Hi Venu,
Check below links
http://www.sap.com/uk/services/education/courses/bw.epx
http://www50.sap.com/useducation/curriculum/print.asp?jc=1&rid=285
http://www50.sap.com/useducation/curriculum/print.asp?jc=1&rid=458
http://www50.sap.com/useducation/certification/examcontent.asp
http://www50.sap.com/useducation/certification/curriculum.asp?rid=506&vid=5
http://www50.sap.com/useducation/certification/curriculum.asp?rid=420
BW Certification Preperation
BW CERTIFICATION 3.5
Re: SAP BW Certification
/thread/49323 [original link is broken]
BW certification
All the best...
Krishna

Need guidance for impdp

Hi all,
I have a situation here. I am a table dump from production which i need to import in the test database. In the production the tables are having some constraints,indexes,triggers etc the test databases also have the triggers,constraints and indexes but they are different from that of the production. The application team wants the triggers,constraints and indexes of the test db to remain as it is at the same time they need the triggers,constraints and indexes also to be imported into the test db. How can I do that. How should I sketch my import statement. Please help. Sorry if question is wrong.
Thanks
Krishna

KRIS wrote:
Hi all,
I have a situation here. I am a table dump from production which i need to import in the test database. In the production the tables are having some constraints,indexes,triggers etc the test databases also have the triggers,constraints and indexes but they are different from that of the production. The application team wants the triggers,constraints and indexes of the test db to remain as it is at the same time they need the triggers,constraints and indexes also to be imported into the test db. How can I do that. How should I sketch my import statement. Please help. Sorry if question is wrong.
Thanks
KrishnaI think creating the sql file from production dump will help. sorry if i am wrong

Need guidance for ePubs for iBooks

I'm a professional formatter and have converted files to ePubs for several years. Now some of my clients want to upload directly to iBooks with an Author account. Since I'm a PC person I don't work with MACs although I myself have an Apple account (I have an iPad and iPhone). Lately several clients have gotten stopped at the upload because Apple says that the file they are trying to upload has spaces (that's the way my conversion software saves ePubs). So my question, should I be sending my clients special ePub files for iBooks with new space-less file names? It's not a problem, I just need to know to do this. All of my ePubs are validated through IDPF.

I found this at p. 46 of the iBookstore asset guide:
"All characters in the URIs must be valid with non-alphanumeric characters properly encoded (e.g., space should be encoded as '%20'). This problem most often surfaces in URIs in the NCX files and is due to spaces included in filenames. "
Via an account at iTunes Connect, you can normally get all the various guides produced by Apple regarding books (BookProoferUserGuide, iBookstore - Publisher User Guide, iTunesConnect_Publisher UserGuide)

Need guidance for ABAP certification

Hello All,
I am going to write exam on C_TAW10 and TAW12. Wondering if anyone has any practice test on this, can be shared ?
as i am doing training through Online from Genovate. I have worked on ABAP also, can anyone guide me how to prepare for the Exam.
thanks,
Sujeet

Hi Sujeet,
Concentrate more on the Competency Areas mentioned in the sap.com for the specified exam. Questions will come only from those competency areas mentioned there. All the topics do not hold same weightage. For some topics, it is more and for less it is less.
Go through the materials minimum of 3 times, if you can go through them for 5 times, then you are safe.
All the Best.
Please let me know If there is anything else.
Vishwa.

Need guidance for iphone4s without contract

hello am planning to buy iphone 4s from apple store without contract. I just want to know whether it will perfectly work in india with all the Local GSM Carrier, or if there is any apple restricted carrier for india can you please help me out

without contract and unlocked are 2 different phones. Be sure to get an unlocked one. Test your sim from India before you leave the store.
Also note that the warranty is not international. If you buy that phone you will need to ship it to someone you know in that country to be taken in for service. All shipping will be at your expense.
You are best to buy one in India where they are unlocked and have local warranty support. Have a look at this user who bought one outside of India and is trying to get service: https://discussions.apple.com/thread/4049298?tstart=0
Good Luck.

Need guidance for implementing perimeter authentication

Hello,
1.) I have a WLS and a WLI Server on different servers, both have access to the same Active Directory LDAP.
2) I want the WLS application to authenticate a user via username/password, and then call the WLI JPD process (on the other server) as that user, WITHOUT having to re-authenticate the user (that was authenticated on the WLS).
3.) It sounds like I need perimeter authentication, BUT do I need to customize an authentication and assertion provider, etc --OR is there someway of configuring Weblogic's default providers?
Thanks for any and all help!
Keith

export is not a backup.Export is not a Physical backup but its a logical backup...:)
I agree sybrand it is recommended not to rely on Export because it is inconsistent...but it is still valid if an user acciedentaly drops the tables or objects..
Cheers
Maran

Need guidance for adavnace java

Hello,
please can any one help me with advance java. i need to start learning advance java, can any one refer me good books for all the modules in advance java, i appreciate ur help.
regards
raghu

The Sun's own Java EE tutorial covers everything: [http://java.sun.com/javaee/5/docs/tutorial/doc/]
If you're only interested in learning JSP/Servlet and some essential taglibs, then part II is sufficient.

Need info for adding wireless to wired setup

How do I add wireless to my wired setup? There is an imac, macbook Pro, and an HP laptop on a wired router. I expect to add ipod touch to the group. I don't know anything about wireless so I don't know what I need to know!
Any info would be welcome.

Please be sure to check back if you do have any questions, especially before purchasing anything. Ken also offered another option and that would be to turn one of your Macs into a "software" router.
OS X has a built-in Internet sharing feature. Without having to buy any additional networking equipment, the Mac that has both Ethernet and AirPort capability could be used as a router. It is not full featured and it does not offer very good wireless security, but it may just be what you need in the mean time.
However, in the long run, I would recommend that you just get a WAP or an AirPort Express to provide the wireless network.
An example of a non-Apple WAP would be the Linkys/Cisco WAP610N.

Need pointers for adding voip feature to an ios app

Hi,
I am looking to add a voip feature to an Iphone and ipad app and wanted to check if there are frameworks within IOS that can be used to enable voip calls between two IOS devices.
Also, I wanted to check if there is publicly available or for purchase IOS code librabry for XMPP/Jingle that can be leveraged to build out the voip capability.

Sure! There is an AS3 branch in the zxing library. This should get you started (its for Androdi but should work for IOS too):
http://www.remotesynthesis.com/post.cfm/adding-a-qr-code-reader-in-flex-on-android

Need guidance for adding a seekbar bar timer!

Similar Messages

Maybe you are looking for