Need guidance for netweaver

Hi,
I'm Logu. I like to switch over from j2ee to sap esspecially Netweaver .
Even i don't know more about sap.
Is it possible to switch over?If it is,How do i come to know about Sap and netweaver?
And Which is the best option in Netweaver for J2ee developers?

Logu,
I SAP Netweaver we've a componet called Enterprise Portal, it mainly deals with WAS and Java programming.
May be it is good direction for you to go with
-Pavan

Similar Messages

Need help for NetWeaver MDM Software Download

<b>Hi.. I need to download Netweaver MDM 5.5 component from marketplace.As MDM not part of 2004s download package so I have to download it separately. I have search all components but i didn't get any link for download. Is anybody can send me download link for MDM ? Your response will be highly appreciated. Thanks is advance.</b>

Hi..
Thanks for your response. I have followed following path as per u r response.But after clicking Netweaver there are 5 diff option but no MDM. When i have click on Netweaver then It gives two options NW 2004 or NW 2004s. So please send me direct link for download if possible. It will be great help from your side and highly appreciated.
software download -> Download -> SAP Installations & Upgrades -> Entry by Application Group -> SAP NetWeaver
<b>
SAP NetWeaver
ADAPTIVE COMPUTING CONTROLLER
SAP CONTENT SERVER
TRAINING CONTENT FOR SAP KW
Technology components releases prior to SAP NetWeaver
</b>
Thanks & Regards
Jignesh

Need guidance for setting up distribution list

I have OD setup, I have Mailing Lists setup for groups such as IT, Marketing, etc.
The only thing I have not quite figured out is setting up distribution lists for outside senders that can be distributed to LDAP users in OD. I have been searching the forums and have found bits and pieces of data, but cannot yet locate any guidance for getting this setup.
I thought that this would be handled in the /etc/aliases file, but it appears that this only applies to local users.
If someone could point me in the right direction, I would be grateful.

I understand that more than 15,000 photos in a catalogue will degrade Lightroom's performance
100% incorrect false misleading don't listen to this nonsense, people in this and other forums have over 1/4 million photos in a single catalog
I am concerned that several catalogues will be confusing about which catalogue a specific image is in.
Very smart!
What guidance can someone suggest for creating and organizing multiple catalogues?
Use a single catalog, and move towards keyword/caption/metadata organizing rather than folder-based organizing (as much as can practically be done given the time constraints in your life)

Need material for netweaver

hi all
i am new to this field.....i have some doubts
what is netweaver .... what for it is used .... what is the relation between netweaver and XI .... can get some study material for those two
regards
john

Check this....
https://www.sdn.sap.com/irj/sdn/xi-elearning
Powered by SAP NetWeaver Partner Program FAQ
This Document Provides Answers to Frequently Asked Questions About:
Powered by SAP NetWeaver Partner Program
What is the difference between the SAP Software Partner Program and the Powered by SAP NetWeaver Partner Program? How do we know which program we fit into?
How do I join the Powered by SAP NetWeaver Partner Program?
Will SAP ensure that other partners (and SAP) will not offer solutions that compete with mine?
What are the requirements for vendors to join the Powered by SAP NetWeaver Partner Program?
What specific benefits will I receive if I join the Powered by SAP NetWeaver Partner Program?
As a Powered by SAP NetWeaver partner, how will information about my certified solution reach SAP customers and account executives?
What are the major reasons an ISV should switch now from Oracle, BEA, or Microsoft to SAP NetWeaver?
What does it cost to become a member of the Powered by SAP NetWeaver Partner Program?
What does the Powered by SAP NetWeaver certification process entail?
What technical assistance will I receive along the way?
What software and licenses do I need?
How long will it take to complete the Powered by SAP NetWeaver certifications?
We currently run our application on the IBM WebSphere Application Server (or the BEA WebLogic platform), and customers are very happy with that. Why should we support SAP NetWeaver AS, which is newer and less well-known?
Why are there both Powered by SAP NetWeaver solutions from SAP and Powered by SAP NetWeaver partner solutions?
What is the difference between Powered by SAP NetWeaver solutions and the SAP xApps portfolio of packaged composite applications?
Where can I find more technical information about SAP NetWeaver?
SAP NetWeaver Portal Business Package Integration
What is required for a business package to pass certification?
What tools can I use to develop a business package?
Our application does not require authentication. Do we still need to support SSO requirements for business package certification?
How can a business package support SSO with SAP NetWeaver Portal?
J2EE Deployment
What versions of the J2EE standard does SAP NetWeaver support?
What Java Development Kit (JDK) versions does SAP NetWeaver require?
What do we need to do to have our J2EE application certified?
How can I deploy my application into the J2EE engine in SAP NetWeaver AS? Does the certification require that we use a particular method?
What enhancements does version 6.40 of the J2EE engine in SAP NetWeaver AS offer versus 6.20?
Are there any advantages to using SAP NetWeaver AS to develop J2EE applications that run in an SAP solution-based environment (compared to using IBM WebSphere or BEA WebLogic)?
How difficult will it be to port my J2EE application that currently runs on IBM WebSphere or BEA WebLogic to SAP NetWeaver AS?
What if I run into problems during the porting/deployment of my J2EE applications to SAP NetWeaver AS?
ABAP Deployment
How does an ABAP application become certified as Powered by SAP NetWeaver?
What are the benefits to an SAP customer of using an SAP-certified ABAP add-on?
SAP Netweaver XI Adapters
How does an SAP NetWeaver XI adapter become certified as Powered by SAP NetWeaver?
What are the benefits to a customer for using an SAP-certified SAP NetWeaver XI adapter?
SAP NetWeaver XI Content Certification
How does a SAP NetWeaver XI content become certified as Powered by SAP NetWeaver?
What are the benefits to a customer for using SAP-certified SAP NetWeaver XI content?
Powered by SAP NetWeaver Partner Program
What is the difference between the SAP Software Partner Program and the Powered by SAP NetWeaver Partner Program? How do we know which program we fit into?
The SAP Software Partner Program is an established program that encompasses all types of qualified application vendors with certified integration and broadly targets all types of software applications and tools that complement SAP solutions.
The Powered by SAP NetWeaver Partner Program is a value-added addendum to our partner programs that is intended for vendors who specifically certify solutions as Powered by SAP NetWeaver. A separate, platform-centric program, the Powered by SAP NetWeaver Partner Program does not require pre-enrollment in the SAP Software Partner Program. The program accommodates the special needs of both a platform ecosystem and vendors who provide solutions based on and certified for the SAP NetWeaver platform.
Independent software vendors (ISVs) can create innovative, high-impact solutions and sales opportunities for the SAP customer ecosystem by becoming Powered by SAP NetWeaver and immediately helping customers lower IT investment costs and risks.
How do I join the Powered by SAP NetWeaver Partner Program?
Please contact us directly at [email protected].
For general information about Powered by SAP NetWeaver, take a look at the resources available at the SAP Developer Network (SDN) site at http://sdn.sap.com.
Will SAP ensure that other partners (and SAP) will not offer solutions that compete with mine?
The Powered by SAP NetWeaver partner program is open to all enterprise software vendors who wish to certify and run their solutions on SAP NetWeaver. Part of being an open ecosystem is open and fair competition among partners, and between SAP and partners. SAP cannot guarantee exclusivity of individual partner solutions, nor can we guarantee that we wont offer competing solutions.
What are the requirements for vendors to join the Powered by SAP NetWeaver Partner Program?
To qualify to become a member of the Powered by SAP NetWeaver Partner Program, you must meet the following minimum criteria:
Have at least one developer trained on SAP NetWeaver technologies.
Deploy your solution according to one of the Powered by SAP NetWeaver qualified certification scenarios and certify it with the SAP Integration and Certification Center (SAP ICC). Qualified Powered by SAP NetWeaver integration scenarios:
Certification of SAP NetWeaver (Web) Application Server (SAP NetWeaver AS, compliant with J2EE or ABAP) and SAP NetWeaver (Enterprise) Portal, or
Certification of XI-Adapter with full integration in SAP (NetWeaver) Exchange Infrastructure (SAP NetWeaver XI), or
Certification of XI-Content integration in SAP NetWeaver XI in combination with SAP NetWeaver Portal (XI Content certification can additional be certified against certain industry standards)
Have at least two sales resources trained on SAP NetWeaver sales messaging.
Have an assigned contact person.
Attend a minimum of one SAP customer event each year.
Actively support positioning SAP NetWeaver as an open technology platform.
Adhere to SAP logo and branding guidelines.
What specific benefits will I receive if I join the Powered by SAP NetWeaver Partner Program?
The Powered by SAP NetWeaver Partner Program offers many benefits. By becoming a certified Powered by SAP NetWeaver partner, you and other certified ISVs will be able to share knowledge and collaborate with SAP at the most cost-effective level to develop, integrate, and deploy world-class solutions that are supported by SAP business planning, enablement, and go-to-market resources and that drive innovation and growth. Another benefit of solutions that are Powered by SAP NetWeaver is their inherent flexibility. Enterprise Services Architecture, the SAP blueprint for service-oriented business solutions, allows you to integrate people, information, and processes and create solutions that enhance and extend current touch points while maintaining open standards and interoperability with other platforms.
ISVs that are certified Powered by SAP NetWeaver partners can reduce their customers total cost of ownership (TCO) and risk by adopting the platform that is quickly becoming the de facto standard among the Global 1,000: the mySAP Business Suite family of business solutions, which are powered by SAP NetWeaver.
The following are some of the benefits of the Powered by SAP NetWeaver Partner Program.
Technology Benefits
Development package
SAP NetWeaver test and development licenses (available)
SAP NetWeaver training (available)
Two days of consulting support (available)
Remote consulting (available)
Sneak preview of new SAP NetWeaver technology and early participation in SAP partner go-to-market initiatives
Marketing and Sales Benefits
Use of Powered by SAP NetWeaver logo
Sales kit templates, such as solution brief
Inclusion in the SAP Partner Directory, available to SAP field personnel, customers, and partners
A prominent web site profile
Access to the online/downloadable SAP NetWeaver Partner Playbook for ISVs
Press release support announcing customer wins (optional)
Active promotion of Powered by SAP NetWeaver partner solution into SAP channels
Opportunity to participate in SAP events, such as SAPPHIRE and SAP TechEd
Exposure to SAP installed base
Inclusion in the SAP NetWeaver Partner Solution Catalog
As a Powered by SAP NetWeaver partner, how will information about my certified solution reach SAP customers and account executives?
SAP provides many avenues for members of the Powered by SAP NetWeaver Partner Program to communicate the availability of certified products through our sales channels, including the use of marketing materials and events. All members are given the opportunity to establish a high-profile presence on SAP.com that highlights their Powered by SAP NetWeaver solutions. SAP also provides a series of templates for building collateral and demos that are pushed out through the SAP intranet to the entire SAP global field sales force. In addition, SAP makes the library of Powered by SAP NetWeaver solutions available to customers through both online and printed materials distributed by SAP. On occasion, SAP will hold seminars, Webinars, and road shows with select partners to co-market the partners Powered by SAP NetWeaver solutions.
What are the major reasons an ISV should switch now from Oracle, BEA, or Microsoft to SAP NetWeaver?
Most ISVs will support more than one platform. We believe that SAPs unique position as a true Applistructure provider makes SAP NetWeaver compelling as a primary platform of choice for ISVs who are looking to make full use of Enterprise Services Architecture and realize the potential of web services.
What does it cost to become a member of the Powered by SAP NetWeaver Partner Program?
There is no fee to join the Powered by SAP NetWeaver Partner Program. There are, however, costs associated with individual elements of the program, including certification, training, and test/demo software licenses, when needed.
What does the Powered by SAP NetWeaver certification process entail?
Several options exist for third-party applications to become Powered by SAP NetWeaver and achieve integration certification with the Powered by SAP NetWeaver branding. Current opportunities include the following:
Portal Integration
All Powered by SAP NetWeaver endorsed solutions have a certified integration into SAP NetWeaver Portal, usually via certified business packages.*
*[exceptions are SAP NetWeaver XI adapters and some ABAP add-ons]
J2EE Applications
J2EE applications are certified for deployment on the J2EE Engine in SAP NetWeaver AS.
ABAP Add-Ons
ABAP add-on applications are certified for deployment on the ABAP stack of SAP NetWeaver AS and proper packaging via the ABAP add-on assembly kit. Some SAP NetWeaver Portal integrations may be accomplished via SAP GUI for HTML instead of the business package integration mentioned above.
SAP NetWeaver XI Adapters
SAP XI adapters leverage the easy and efficient integration of third-party applications on the process and content level via the SAP NetWeaver Exchange Infrastructure component.
SAP NetWeaver XI Content
SAP NetWeaver Exchange Infrastructure offers a complete EAI solution that integrates SAP business system applications as well as non-SAP business solutions (A2A and B2B scenarios). SAP XI content includes all information and knowledge necessary to enable the integration of applications and business processes (collaboration knowledge). Additional certification of XI Content for interoperability with industry standards is also available.
Details of the certification process can be found in the accompanying Powered by SAP NetWeaver Partner Program presentation.
What technical assistance will I receive along the way?
We offer three types of technical assistance:
The SAP Developer Network (SDN) web site: SDN is a community of fellow developers who work with SAP NetWeaver technologies. Please join this community to participate in online forums, Webcasts, and Weblogs around SAP NetWeaver. On SDN you will also find a dedicated SAP ICC Web site containing documentation materials for all integration scenarios above.
SAP Education: SAP education offers basic training for SAP NetWeaver and its different components. Please check the ICC web site on SDN for recommended training classes.
For companies with a valid certification agreement with SAP ICC: SAP assigns an SAP ICC technical consultant(s) to each ISV to provide integration-certification specific education and knowledge transfer in SAP NetWeaver. SAP ICC offers integration consulting and can provide certification testing either remotely or on-site at the SAP ICC certification lab.
What software and licenses do I need?
We provide free trial licenses of software components for development and testing (J2EE engine, SAP NetWeaver Portal, SAP NetWeaver Developer tool, and portal development kit (PDK) on SDN).
SAP sales offices provide in-house licenses for example, ABAP development workbench and SAP Partner Connectivity Kit for SAP NetWeaver XI adapters.
The ICC provides hosted test systems, SAP XI and back-end SAP ERP systems suitable for XI Content certification
How long will it take to complete the Powered by SAP NetWeaver certifications?
The complexity of the application and the integration scenario you select generally determines the timeline. For J2EE deployment, our experience indicates that the average time it takes for certification is three weeks. SAP NetWeaver Portal and iView window and business package integration takes another three weeks. Previous experience integrating with enterprise portals via iView windows or portlets and deploying on J2EE application servers has proven helpful. The duration may therefore greatly differ from vendor to vendor. As a rough estimate for ABAP add-on and SAP NetWeaver XI adapter certification, approximately two to six months are needed to complete a project from registration to publication.
We currently run our application on the IBM WebSphere Application Server (or the BEA WebLogic platform), and customers are very happy with that. Why should we support SAP NetWeaver AS, which is newer and less well-known?
ISVs can reduce their customers TCO and risk by adopting a platform that is quickly becoming the de facto standard among Global 1,000 customers: mySAP Business Suite, powered by SAP NetWeaver. Additionally, SAP NetWeaver is the technology foundation for all new SAP products going forward. As such, it will be implemented at more than 60,000 global SAP installations. Partners can take advantage of this rapidly growing ecosystem by providing customers with solutions that can quickly integrate with SAP NetWeaver.
You should also browse through the information in the SAP/J2EE migration kit.
Why are there both Powered by SAP NetWeaver solutions from SAP and Powered by SAP NetWeaver partner solutions?
SAP is using SAP NetWeaver as the technology platform to power all SAP solutions, including mySAP ERP, mySAP CRM, SAP Industry Solutions and SAP xApps. Partners can take advantage of the large and growing installed base of SAP NetWeaver, and leverage the platform that is already installed, thereby lowering the implementation costs of their Powered by SAP NetWeaver solutions and lowering the customers TCO (total cost of ownership). SAP-built Powered by SAP NetWeaver solutions will therefore run side-by-side with partner-built Powered by SAP NetWeaver solutions.
What is the difference between Powered by SAP NetWeaver solutions and the SAP xApps portfolio of packaged composite applications?
Except for SAP NetWeaver XI adapters, a certified Powered by SAP NetWeaver solution can be almost any type of enterprise application that runs on SAP NetWeaver AS and integrates with SAP NetWeaver Portal as the user interface. On top of that, the SAP xApps packaged composite applications meet the requirements of Powered by SAP NetWeaver and are consistent with the architecture, features, and functions of a true composite application.
SAP xApps composite applications combine web services and data from multiple systems in an application design made possible by the SAP Composite Application Framework tool within the SAP NetWeaver platform. This framework includes the methodology, tools, and run-time environment to develop composite applications. It provides a consistent object model and a rich user experience, and it gives developers a productive way to create composite applications on top of a set of heterogeneous applications. In addition, SAP xApps composite applications are uniquely differentiated in that they are innovative and highly complementary to SAP applications.
Where can I find more technical information about SAP NetWeaver?
SDN is a knowledge and collaboration environment for the SAP community that is developing and implementing within the SAP NetWeaver technology platform. You can find it on the SDN homepage.
For information on SAP ICC, go to Services on SDN and select Integration & Certification.
SAP NetWeaver Portal Business Package Integration
What is required for a business package to pass certification?
All requirements of the business package certification are specified in the test plan, which can be requested from your SAP ICC. The technical requirements for successful certification of a business package include:
Support single sign-on (SSO) to SAP NetWeaver Portal (where applicable).
Adhere to the SAP NetWeaver Portal look and feel (branding)
Provide full support for at least one web browser that is also supported by SAP NetWeaver Portal.
What tools can I use to develop a business package?
We recommend using SAP NetWeaver Development Studio as the integrated development environment (IDE) for your development. In addition, SAP provides the Portal Development Kit (PDK), which provides a wealth of documentation, tutorials, and tools to help you with your content development. The PDK for the Java platform, as well as the PDK for the .NET platform, can be downloaded free from SDN for SAP NetWeaver Portal 5 (only Java) and SAP NetWeaver Portal 6 - see the SDN Download Catalog.
Our application does not require authentication. Do we still need to support SSO requirements for business package certification?
No. The basic idea behind the SSO requirement is to eliminate the need for further manual authentications for an end user who has already logged on to SAP NetWeaver Portal. If your back end (and thus the business package) does not need to authenticate users, this requirement does not apply to your business package.
How can a business package support SSO with SAP NetWeaver Portal?
A business package can implement SSO with SAP NetWeaver Portal in either of the following ways:
SSO based on user mapping, where the portal user is mapped to another user in the external system of the business package. (For information on user mapping-based SSO, see the SAP Library.
SSO based on SAP logon ticket, where the business package retrieves the information about the logged-on user in SAP NetWeaver Portal and verifies it so that the external system can authenticate the user. (As part of the PDK 6.0, please see the javadoc for the class com.sap.security.api.ticket.TicketVerifier as part of the user management service APIs.)
See the SSO-related Weblogs on the SAP ICC homepage on SDN.
J2EE Deployment
What versions of the J2EE standard does SAP NetWeaver support?
SAP NetWeaver supports two versions of the J2EE standard:
J2EE 1.2: SAP NetWeaver AS 6.20
J2EE 1.3: SAP NetWeaver AS 6.40
What Java Development Kit (JDK) versions does SAP NetWeaver require?
Two JDK versions are required:
SAP NetWeaver AS 6.20: JDK 1.3.1 or higher version, below JDK 1.4
For supported platforms, please contact the SAP ICC.
SAP NetWeaver AS 6.40: JDK 1.4.2_07 or higher version below JDK 1.5
SAP supports the following platforms (latest operating system patches as of March 2005):
Solaris SPARC 32 Bit + 64 Bit
Linux 32 Bit + 64 Bit (Itanium)
Windows 32 Bit + 64 Bit (Itanium)
NOTE: On Windows 2003 server, please make sure you have installed Microsoft Hotfix 841176, to be found at http://support.microsoft.com/?id=841176
For up-to-date requirements, please contact the SAP ICC or visit the SAP ICC homepage.
What do we need to do to have our J2EE application certified?
Certification of deployment on the J2EE Engine in SAP NetWeaver AS has two basic requirements:
First, the third-party J2EE application must be successfully deployed onto the J2EE Engine in SAP NetWeaver AS.
Second, after deployment, the application must run as expected based on a mutually agreed-upon test plan.
How can I deploy my application into the J2EE engine in SAP NetWeaver AS? Does the certification require that we use a particular method?
You can use any of the deployment methods provided by SAP for certification. However, the deployment process will differ, based on the version of the J2EE Engine in SAP NetWeaver AS that you use.
For J2EE Engine 6.20, a J2EE application can be deployed onto SAP NetWeaver AS in four different ways, as documented in the deployment manual.
For J2EE Engine 6.40, refer to the Deployment: Putting It All Together section in SAP online help for a detailed explanation of the different deployment methods in version 6.40 of the J2EE engine and SAP NetWeaver AS.
What enhancements does version 6.40 of the J2EE engine in SAP NetWeaver AS offer versus 6.20?
Find out how version 6.40 of the J2EE Engine in SAP NetWeaver AS improves on 6.20.
Are there any advantages to using SAP NetWeaver AS to develop J2EE applications that run in an SAP solution-based environment (compared to using IBM WebSphere or BEA WebLogic)?
The broad customer base of SAP that has installed the SAP NetWeaver platform can select your J2EE application, which can be deployed and run on the J2EE engine. No other non-SAP/J2EE application server is needed.
How difficult will it be to port my J2EE application that currently runs on IBM WebSphere or BEA WebLogic to SAP NetWeaver AS?
SAP NetWeaver AS is fully J2EE-compatible; if your application was developed following the J2EE specifications, the porting of your J2EE application to SAP NetWeaver AS should be very easy. You should also browse through the information in the J2EE migration kit.
What if I run into problems during the porting/deployment of my J2EE applications to SAP NetWeaver AS?
We recommend that you join SDN and consult its forums and documentation. Here you will find a wealth of experience in installing SAP NetWeaver, porting, and so forth from your fellow developers. If you have a contract for consulting or certification with SAP ICC in place, a designated SAP consultant would help you resolve the problems.
ABAP Deployment
How does an ABAP application become certified as Powered by SAP NetWeaver?
The ABAP application (add-on) needs to meet all of the following criteria:
The add-on must be ABAP-certified on the ABAP stack of SAP NetWeaver AS 6.20 or higher and contain GUI elements that are supported by the SAP GUI for HTML.
If the add-on solution contains additional J2EE parts, these parts must also run on the SAP NetWeaver platform and could be certified for their deployment on the J2EE stack.
The add-on needs to be packaged and distributed using the SAP add-on assembly kit. This tool is available as part of the certification agreement.
What are the benefits to an SAP customer of using an SAP-certified ABAP add-on?
Customers can import and maintain the third-party add-on using the SAP standard transactions SAINT and SPAM. It is assured that the add-on can be used and controlled using SAP NetWeaver Portal.
SAP Netweaver XI Adapters
How does an SAP NetWeaver XI adapter become certified as Powered by SAP NetWeaver?
SAP ICC provides certification opportunities for third-party adapters for the SAP NetWeaver XI adapter framework (NW-XI-AF). These adapters must be implemented as resource adapters of the Java Connector Architecture 1.0. Adapters enable the SAP NetWeaver XI integration engine to talk to different application components or industry standards. Within SAP NetWeaver XI, it is important that the adapters are lightweight, in case the integration directory must be used to keep track of required services and mappings. To pass integration certification testing, SAP NetWeaver XI adapters are also required to build the connection directly to other applications or technical systems and must be deployed to SAP NetWeaver XI.
ISVs can use SAP Partner Connectivity Kit, available through any SAP sales office, as the platform to develop their SAP NetWeaver XI adapters.
What are the benefits to a customer for using an SAP-certified SAP NetWeaver XI adapter?
Customers are assured that the adapter is embedded properly on the SAP NetWeaver platform. Monitoring and configuration of this adapter can be centrally handled via SAP NetWeaver XI. No additional software systems are needed to run an SAP- certified SAP NetWeaver XI adapter.
SAP NetWeaver XI Content Certification
How does a SAP NetWeaver XI content become certified as Powered by SAP NetWeaver?
The XI content needs to meet all of the following criteria:
All XI objects must be embedded in one or more integration scenarios
Optional XI content can be developed supporting industry standards. The industry standard interfaces must be utilized on one side of the integration scenario
ISVs have to specify required functional test cases to ensure the functional correctness of all objects contained in the integration scenarios
ISVs must provide the documentation of the required design and configuration steps
What are the benefits to a customer for using SAP-certified SAP NetWeaver XI content?
XI Content is a key differentiator of our integration solutions. SAP delivers XI content to facilitate the implementation process and thus reduce the TCO for the customers. Customers easily understand the underlying business scenarios of XI content objects.

I need Guidance for SAP Teched for BW

Hi Everybody,
Iam new to this forum.I need some guidance regarding preparation for BW certification.
1.Which books i should read for what topics?
2.How many questions from individual topics we may expect?
3.Any documents that may help in preparing for BPS part.
4.I need some personal plans followed by you to get success in Teched(Your experiences).
Hope all of you will support me in all respects so that i too can achieve certification.
Thanks for your support.
Best regards,
Venu
mail:[email protected]

Hi Venu,
Check below links
http://www.sap.com/uk/services/education/courses/bw.epx
http://www50.sap.com/useducation/curriculum/print.asp?jc=1&rid=285
http://www50.sap.com/useducation/curriculum/print.asp?jc=1&rid=458
http://www50.sap.com/useducation/certification/examcontent.asp
http://www50.sap.com/useducation/certification/curriculum.asp?rid=506&vid=5
http://www50.sap.com/useducation/certification/curriculum.asp?rid=420
BW Certification Preperation
BW CERTIFICATION 3.5
Re: SAP BW Certification
/thread/49323 [original link is broken]
BW certification
All the best...
Krishna

Need guidance for fusion web developement

Hi. I am newbie. I am currently using jdeveloper 11.
I have surfed a lot of videos about application developement using oracle fusion web development. Can anybody please suggest some really good books/tutorials/videos for my requirement below.
1. There are lot of tables which I have created for my business. The jsf page should have the feature to view existing/add data to these tables. It should be able to plot graphs.
2. I have created batch files which will send mails. I need to use buttons on the page which when clicked will exectue these batch files. In my previous post, they have asked me to use an ActionListener.
3. I had studied Java programming a long time ago (forgotten almost all of it). Please tell me what concepts of java should i study again so that i can program all these above things into my aplication.
I have until now just built a simple application which allows me to display values from a table in an adf form on a jsf page. I have surfed enough forums, like stackoverflow.com but i am not able to find the answers that i need to these above questions. This forum is my last hope! Please help guys!
P.s : I have glanced through these books,
Jdeveloper handbook 11g, quick start guide to oracle fusion web development.
Regards,
Sachin

Hi,
1.http://docs.oracle.com/cd/E18941_01/tutorials/jdtut_11r2_58/jdtut_11r2_58_1.html
2. why do you need batch files? you can send mails through javax.mail API http://adfblogs.blogspot.com.es/2012/01/sending-e-mail-from-adf-application.html
3.this post resume a lot of resources for training and beginning https://blogs.oracle.com/shay/entry/how_do_i_start_learning_oracle_adf_and_jdeveloper

Need guidance for ePubs for iBooks

I'm a professional formatter and have converted files to ePubs for several years. Now some of my clients want to upload directly to iBooks with an Author account. Since I'm a PC person I don't work with MACs although I myself have an Apple account (I have an iPad and iPhone). Lately several clients have gotten stopped at the upload because Apple says that the file they are trying to upload has spaces (that's the way my conversion software saves ePubs). So my question, should I be sending my clients special ePub files for iBooks with new space-less file names? It's not a problem, I just need to know to do this. All of my ePubs are validated through IDPF.

I found this at p. 46 of the iBookstore asset guide:
"All characters in the URIs must be valid with non-alphanumeric characters properly encoded (e.g., space should be encoded as '%20'). This problem most often surfaces in URIs in the NCX files and is due to spaces included in filenames. "
Via an account at iTunes Connect, you can normally get all the various guides produced by Apple regarding books (BookProoferUserGuide, iBookstore - Publisher User Guide, iTunesConnect_Publisher UserGuide)

Need Link for Netweaver 2004S trial version for Windows 03

I want to install Enterprise Portal 6.0. To do this, I intend installing Netweaver 2004S (7.0) as portal comes bundled with this. The instllation will be on a windows server 2003 machine.
I am unable to find a trial version intallation for NW2004S for a windows 2003 server machine (64 bit). I found installations for NW2004S which run on linux machines.
I would appreciate if someone could send me a link for downloading NW2004S trial version either from marketplace or anywhere else. A link to the installation guide would also be helpful. Any suggestions are also very welcome.

Hi,
All corrective software packages, including Support Packages (Stacks) for SAP NetWeaver 7.0 and subsequent versions, as well as all applications which are based on this software (including SAP Business Suite 2005), released after April 2, 2007, will be available exclusively through the Maintenance Optimizer in SAP Solution Manager.
Follow the link below :
https://websmp110.sap-ag.de/solman-mopz
For the installation & master guide follow the link :
https://websmp208.sap-ag.de/instguidesnw
Thanks,
Nitesh Jain

Need guidance for iphone4s without contract

hello am planning to buy iphone 4s from apple store without contract. I just want to know whether it will perfectly work in india with all the Local GSM Carrier, or if there is any apple restricted carrier for india can you please help me out

without contract and unlocked are 2 different phones. Be sure to get an unlocked one. Test your sim from India before you leave the store.
Also note that the warranty is not international. If you buy that phone you will need to ship it to someone you know in that country to be taken in for service. All shipping will be at your expense.
You are best to buy one in India where they are unlocked and have local warranty support. Have a look at this user who bought one outside of India and is trying to get service: https://discussions.apple.com/thread/4049298?tstart=0
Good Luck.

Need guidance for implementing perimeter authentication

Hello,
1.) I have a WLS and a WLI Server on different servers, both have access to the same Active Directory LDAP.
2) I want the WLS application to authenticate a user via username/password, and then call the WLI JPD process (on the other server) as that user, WITHOUT having to re-authenticate the user (that was authenticated on the WLS).
3.) It sounds like I need perimeter authentication, BUT do I need to customize an authentication and assertion provider, etc --OR is there someway of configuring Weblogic's default providers?
Thanks for any and all help!
Keith

export is not a backup.Export is not a Physical backup but its a logical backup...:)
I agree sybrand it is recommended not to rely on Export because it is inconsistent...but it is still valid if an user acciedentaly drops the tables or objects..
Cheers
Maran

Need guidance for adavnace java

Hello,
please can any one help me with advance java. i need to start learning advance java, can any one refer me good books for all the modules in advance java, i appreciate ur help.
regards
raghu

The Sun's own Java EE tutorial covers everything: [http://java.sun.com/javaee/5/docs/tutorial/doc/]
If you're only interested in learning JSP/Servlet and some essential taglibs, then part II is sufficient.

Need guidance for eDirectory for GroupWise 2014 Installation

Hello,
I am installing GroupWise 2014 on Windows Server 2012. I first need to install eDirectory. This will at first be a test server for now. I don't know what to do for the eDirectory install. The documentation tells us what to do but it does not give a visual example or sample of what to put in. So, it does not make sense to me.
I am including two attachments. One attachment shows my eDirectory installation screen where I am to declare a tree and context, and to create my Admin account. Why do I keep getting a Context Format Error, and what should it look like? Please provide an example for each field shown on the screenshot example. Also, if you need a domain name, let's call it mycompany.com for now. The Windows 2012 server is in Workgroup Mode and it will not be joined to Active Directory.
Thank you.

Hi there,
Originally Posted by jhieb
I am installing GroupWise 2014 on Windows Server 2012. I first need to install eDirectory.
You are aware that with GroupWise 2014 no directory (be it eDirectory or Active directory) is not needed anymore?
Originally Posted by jhieb
This will at first be a test server for now. I don't know what to do for the eDirectory install. The documentation tells us what to do but it does not give a visual example or sample of what to put in. So, it does not make sense to me.
De GroupWise documentation does indeed not go into the eDirectory details. eDir is seen as a different product for which you can find the needed documentation in it's own section.
I'm curious though, are you wanting to install eDirectory because you will need that at a later point in time, or because you think that is required to run GroupWise 2014?
Cheers,
Willem

Need guidance for a Combo Box and Keystoke/Validate script

Hello,
My goal is to have a combo box selection trigger and enter a value into a text field however the text field needs to be editable. I want the combo box to determine a default value but changeable by the user if necessary. Here is the script, I just don't know where to put it.
if (!event.willCommit) {
var M1Month = this.getField("Month 1 Pulldown").value; var M1Exp = this.getField("M1 Exp");
if(M1Month == "January") {M1Exp.value = "1/31/10"};
if(M1Month == "February") {M1Exp.value = "2/28/10"};
if(M1Month == "March") {M1Exp.value = "3/31/10"};
if(M1Month == "April") {M1Exp.value = "4/30/10"};
if(M1Month == "May") {M1Exp.value = "5/31/10"};
if(M1Month == "June") {M1Exp.value = "6/30/10"};
if(M1Month == "July") {M1Exp.value = "7/31/10"};
if(M1Month == "August") {M1Exp.value = "8/31/10"};
if(M1Month == "September") {M1Exp.value = "9/30/10"};
if(M1Month == "October") {M1Exp.value = "10/31/10"};
if(M1Month == "November") {M1Exp.value = "11/30/10"};
if(M1Month == "December") {M1Exp.value = "12/31/10"};
if(M1Month == " ") {M1Exp.value = ""};

I did not say to take out the line. You need to replace the "" (a null string), with " " (a space).
But I would look at using the 'switch' statement that allows for a series of logical test and if none of those specific test has been passed takes a default action.
You need to put the script in the 'Custom keystroke script'.
if (!event.willCommit) {
var M1Exp = this.getField("M1 Exp");
if(event.changeEx == "January") {
M1Exp.value = "1/31/10";
} else if(event.changeEx == "February") {
M1Exp.value = "2/28/10";
} else if(event.changeEx == "March") {
M1Exp.value = "3/31/10";
} else if(event.changeEx == "April") {
M1Exp.value = "4/30/10";
} else if(event.changeEx == "May") {
M1Exp.value = "5/31/10";
} else if(event.changeEx == "June") {
M1Exp.value = "6/30/10";
}else if(event.changeEx == "July") {
M1Exp.value = "7/31/10";
} else if(event.changeEx == "August") {
M1Exp.value = "8/31/10";
} else if(event.changeEx == "September") {
M1Exp.value = "9/30/10";
}else if(event.changeEx == "October") {
M1Exp.value = "10/31/10";
}else if(event.changeEx == "November") {
M1Exp.value = "11/30/10";
}else if(event.changeEx == "December") {
M1Exp.value = "12/31/10";
}else{
// all other selections
M1Exp.value = "";
} // end not will commit
You will also need to use the 'event' object's 'changeEx' property.
If you do not need the selected text, by setting the export value to the expiration date your script could be:
if (!event.willCommit) {
this.getField("M1 Exp").value = event.changeEx;

Need guidance for upgrading application server

hello everyone ,
i have recently upgraded my oracle database from 9.2.0.5 to 10.2.0.4 on HP uX 11.11 , my EBS version is 11.5.10
now i want upgrade my application server, firstly i didnt knew version of my AS
after searching through oracle installer i found out the following components
/appldvp/apps/prodora/8.0.6
Oracle Unix Installer 4.0.3.0.0
Oracle On-Line Text Viewer 1.0.1.0.0
Client Software 8.0.6.0.0
Ordts Common Libraries 8.0.6.0.0
ORACLE NLS Libraries and Utilities 8.0.6.0.0
ORACLE Core Libraries 8.0.6.0.1
ORACLE Common RDBMS Libraries and Utilities 8.0.6.0.1
ORACLE PL/SQL Libraries 8.0.6.0.0
ORACLE Common Libraries 8.0.6.0.1
ORACLE Common Precomp Libraries 8.0.6.0.1
ORACLE Common Network Libraries and Utilities 8.0.6.3.0
ORACLE Common Trace Libraries 8.0.6.0.0
ORACLE Common Utilities 8.0.6.0.0
ORACLE Common Agent Libraries 8.0.6.0.0
ORACLE Common Libraries and Utilities 8.0.6.0.0
Platform specific Libraries and Utilities 8.0.6.0.0
Net8 (SQL*Net and Names) 8.0.6.3.0
TCP/IP Protocol Adapter 8.0.6.0.0
Remote Operations 3.0.2.0.1
Oracle Names 8.0.6.3.0
ToolKit 6.0 Base 6.0.8.10.1
Discoverer Collector 4.1.48.06.00
Configuration Guide 4.1.33f
Discoverer Libraries 4.1.48.06.00
Discoverer Locator 4.1.48.06.00
Discoverer Preferences 4.1.48.06.00
Discoverer Session 4.1.48.06.00
Oracle Discoverer Viewer for Web 4.1.48.06.00
Oracle Discoverer Plus 4.1.48.06.00
Oracle Discoverer Server (Web) 4.1.48.06.00
JInitiator 1.1.7.30
JInitiator 1.1.8.11
VisiBroker Smart Agent 3.3.1.0
VisiBroker for C++ 3.3.3.0
VisiBroker for Java 3.4.0.0
VisiBroker Products 3.3.1.0
PL/SQL 8.0.6.3.0
Oracle Server Manager 3.0.6.0.0
Oracle8 Enterprise (RDBMS & PLSQL) 8.0.6.3.0
<Database Startup> Load Files 1.0.0.0.1
Oracle Intelligent Agent 8.0.6.0.0
Oracle Trace 8.0.6.0.0
Precomp 8.0.6.3.0
Pro*C/C++ 8.0.6.3.0
Oracle8 JDBC Drivers 8.0.6.3.0
Java Runtime Environment 1.1.6.2o
Java Runtime Environment 1.1.8.13
SQL*Plus 8.0.6.0.0
ToolKit 6.0 Extension 6.0.8.10.1
Multimedia APIs 6.0.5.33.0
Tools Common Area 6.0.5.32.0
PL/SQL Procedure Builder 6.0.8.11.0-449
Integration Services 6.0.5.35.0
Oracle SQL Manager Library 6.0.8.10.0
Virtual Graphics System 6.0.5.35.0
Oracle Charting Library 6.0.8.10.1
Oracle Graphics 6.0.8.10.0
Oracle Forms Server and Forms Developer 6.0.8.11.3
Oracle Reports Server and Reports Developer 6.0.8.11.2
ZRC Library 6.0.8.3.5
GE Libraries 6.0.8.10.0
Release Notes for Oracle Tools Products 6.0.8.11.2
Tuxedo Support for Forms 6.0.5.2.0
Oracle Jinitiator (Domestic) 1.1.7.31
Oracle JDK Appletviewer (Domestic) 1.1.7.31
Oracle Browser 6.0.5.32.0
Oracle Wallet Manager 2.1.0.0.0
Common documentation resources 2.0.0.0
Oracle for HP 9000 Servers and Workstations Documentation 8.0.6.0
Resource Object Store 6.0.5.0.1
Toolkit Utility Library 6.0.5.33.1
Toolkit Automation Library 6.0.5.33.1
Oracle Information Navigator 6.0.4.0.0
Online Documentation Library 6.0.8.11.4
Project Builder 6.0.5.6.0
is AS version 8.0.6 , if it is , how do i upgarde to the latest on avaialble
thanx in advance

document 146468.1 specifies how to upgrade to latest realese of 9i AS , but i want ot upgrade it to 10gYou cannot upgrade your Oracle 9iAS to Oracle AS10g, you can only upgrade it to 9iAS (1.0.2.2.2). For more details, refer to Note: 186981.1 (What versions of Oracle9i Application Server Release 1 can be used with Oracle E-Business Suite Release 11i) and (Can an existing Release 11i application server be upgraded to Oracle Application Server 10g?)
If you want to have Oracle Applications Server 10g, you need to install it in a NEW ORACLE_HOME (Refer to Note: 233436.1 for more details).
i am still confused for my AS version , how can i clarify that To determine the version, issue:
UNIX: $ORACLE_HOME/Apache/Apache/bin/httpd -version
Windows: %ORACLE_HOME%\Apache\Apache\apache.exe -version
main components which i am using with my current AS are forms and reports serverOracle Developer 6i (Forms and Respports) are NOT part of Oracle Applications Server installation, it is installed under 8.0.6 ORACLE_HOME.
can they be independently upgraded?Yes, see my answer to the first question in this reply.

Need guidance for working with the available example labview VI

Hello,
I'm working with the pulse signals and the pulse signals will be effected by the motion artifacts.There is similar thread available on labview here Adaptive filtering to cancel out noise from an pulse signal for removing the motion artifacts from pulse signals.so,I am planning to use the vi posted in the thread as LMS block by block(example) with sampling rate of 100Hz and number of samples needed=100 using DAQPad-6015/6016.
But I am confused with the channels of DAQ as the author(who bulit this vi) says the channel0 for signal and channel1 for reference signal as shown in the attached image.
1)If channel1(aio) of DAQ is feeded with the analog input of pulse signals then what is the input needed/feeded to the channle1 of DAQ.
2)Can I directly use the vi by changing the sampling rate of 100hz and number of samples=100 or anything else is needed for this requirement.
Can someone explain me the required input to the channels and settings with the DAQ. thanks.
Attachments:
LMS_example.JPG ‏127 KB

Hello,
can someone explain how the DAQ channels settings are to be done.
thanks.

Need guidance for netweaver

Similar Messages

Maybe you are looking for