Need guidance for working with the available example labview VI
Hello,
I'm working with the pulse signals and the pulse signals will be effected by the motion artifacts.There is similar thread available on labview here Adaptive filtering to cancel out noise from an pulse signal for removing the motion artifacts from pulse signals.so,I am planning to use the vi posted in the thread as LMS block by block(example) with sampling rate of 100Hz and number of samples needed=100 using DAQPad-6015/6016.
But I am confused with the channels of DAQ as the author(who bulit this vi) says the channel0 for signal and channel1 for reference signal as shown in the attached image.
1)If channel1(aio) of DAQ is feeded with the analog input of pulse signals then what is the input needed/feeded to the channle1 of DAQ.
2)Can I directly use the vi by changing the sampling rate of 100hz and number of samples=100 or anything else is needed for this requirement.
Can someone explain me the required input to the channels and settings with the DAQ. thanks.
Attachments:
LMS_example.JPG 127 KB
Hello,
can someone explain how the DAQ channels settings are to be done.
thanks.
Similar Messages
-
I have changed my Apple ID name and I want to change it on iCloud, however I am not able to delete the previous account because I need to turn off the Find my iPhone - and for that I need to log in with the old name and that is not working. Help anyone?
Hey tulgan,
This link will provide information on what to do after you change your Apple ID:
Apple ID: What to do after you change your Apple ID
http://support.apple.com/kb/HT5796
Welcome to Apple Support Communities!
Take care,
Delgadoh -
I get no wireless signal inside my home, only outside, so I need a network extender that will work for the Lumia 2520, Specs indicate it uses LTE FDD netork Band 20 (800MHz), Band 3 (1800MHz), Band 7 (2600 MHz). Does Verizon offer a network extender that will work with the Lumia 2520?
We want to make sure you get service in your home Astromandata! I can check your area to see if you qualify for the network extender. What's your zip code? If it does qualify than you will be able to use it for your Lumia to support your voice services. Find out more information here: http://spr.ly/6585fNlt Is anyone else having this issue?
AmberF_VZW
Follow us on Twitter @VZWSupport
If my response answered your question please click the �Correct Answer� button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!! -
I'm a software tester for an in-house app at my company. version 10.0.2 is not cmopatible with some controls within our software. I need the v9.0.1 download which I know works with the controls. Where can I get it?
Well, if you need old versions of firefox you can find them on this site:
- http://www.oldapps.com/firefox.php
Best regards, G-Cloud. -
I am looking for a binaural USB headset with microphone to use during Go To Meeting sessions and Webinar's. Seems to be little that works with the iMac and most of the web searches have not been encouraging. Any suggestions on units that work. I have a new iMac running Snow Leopard 10.6.8.
BobI am looking for a binaural USB headset with microphone to use during Go To Meeting sessions and Webinar's. Seems to be little that works with the iMac and most of the web searches have not been encouraging. Any suggestions on units that work. I have a new iMac running Snow Leopard 10.6.8.
Bob -
After the OS X Yosemite 10.10.3 update When I go to use Preview to view a photo it shows up for less than a second then disappears and just leaves a gray box where the photo should be. iMac (Retina 5K, 27-inch, Late 2014). I need Preview for work.
1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
The test works on OS X 10.7 ("Lion") and later. I don't recommend running it on older versions of OS X. It will do no harm, but it won't do much good either.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of it have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message. See, for example, this discussion.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a general summary of what you need to do, if you choose to proceed:
☞ Copy a particular line of text to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
These are not specific instructions; just an overview. The details are in parts 7 and 8 of this comment. The sequence is: copy, paste, wait, paste again. You don't need to copy a second time.
5. Try to test under conditions that reproduce the problem, as far as possible. For example, if the computer is sometimes, but not always, slow, run the test during a slowdown.
You may have started up in "safe" mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. Load this linked web page (on the website "Pastebin.") The title of the page is "Diagnostic Test." Below the title is a text box headed by three small icons. The one on the right represents a clipboard. Click that icon to select the text, then copy it to the Clipboard on your computer by pressing the key combination command-C.
If the text doesn't highlight when you click the icon, select it by triple-clicking anywhere inside the box. Don't select the whole page, just the text in the box.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Click anywhere in the Terminal window to activate it. Paste from the Clipboard into the window by pressing command-V, then press return. The text you pasted should vanish immediately.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. If you don't know the password, or if you prefer not to enter it, just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, a series of lines will appear in the Terminal window like this:
[Process started]
Part 1 of 8 done at … sec
Part 8 of 8 done at … sec
The test results are on the Clipboard.
Please close this window.
[Process completed]
The intervals between parts won't be exactly equal, but they give a rough indication of progress. The total number of parts may be different from what's shown here.
Wait for the final message "Process completed" to appear. If you don't see it within about ten minutes, the test probably won't complete in a reasonable time. In that case, press the key combination control-C or command-period to stop it and go to the next step. You'll have incomplete results, but still something.
12. When the test is complete, or if you stopped it because it was taking too long, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak for themselves, not for me. The test itself is harmless, but whatever else you're told to do may not be. For others who choose to run it, I don't recommend that you post the test results on this website unless I asked you to.
Copyright © 2014, 2015 by Linc Davis. As the sole author of this work (including the referenced "Diagnostic Test"), I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
Am considering buying a Time Capsule. But all specs I read about it (re: printing) is how to hook up a printer via USB connection. Need to confirm...that a wireless printer will work with the router feature of the Time Capsule. I assume yes...?
A wireless printer connects to the network just like your computer, or iPhone/iPad, etc. connects using wireless.
The printer must be set up intially to scan to "find" available wireless networks, then your specific wireless network needs to be selected. Then the password for the network needs to be entered.
Once the printer is configured to join the network, it is always connected to the network. No further configuration is required. -
What is the maximum resolution available for use with the Apple Mini DisplayPort to Dual-Link DVI adapter?
Hey guys,
I found out an answer by myself...
The missing link : the MacBook Pro needs to be powered... as in you need to plug the charger in...
In conclusion, you simply plug everything, turn on the MacBook Pro, close the lid, and there you go ! -
I downloaded and installed Airport Express Utility 5.6 to get my old Airport Express to work with the latest Mac OSX 10.7.4, but when I install and run it, it still says my Airport Express is out-of-date and needs the 5.6 utility. What's up?
It is likely that you downloaded AirPort Utility 5.6.1. If you checked the requirements, this only runs on Leopard or Snow Leopard Macs.
You have Lion, so you need AirPort Utility 5.6 for Mac OS X Lion -
Does Microsoft Entourage 2008 for mac work with the new Mac OS X v 10.7 Lion
Does Microsoft Entourage 2008 for mac work with the new Mac OS X v 10.7 Lion?
I am just about to install Lion just need to check to see if if my work e-mail will workSarah,
Check this link:
http://roaringapps.com/app:2533
It contains some issues that people have encountered with Lion and Office 2008. It appears it can work, but you may have to go through some of the steps a few of the posters there have listed.
That website also contains a pretty large list of applications and if they will work with Lion.
Hope this helps! (I am not affiliated in any way with the site linked). -
Need to know if my icable will work with the tv connceted to the ipod
i have about..85songs on my ipod...but i cant listen to the ipod via headphone right now and i have the icable.. but i was wondering if the icable can be plugged into the tv or do we need to have a new cable via ipod to tv... much help is needed...because i payed about 30dollars on the icable for the radio but i want to conncet it to the tv also...do i need to buy a new cord for the tv/ipod? and leave the one for the radio only alone? any help would be GREATTTT!(NOTE: i made two diff post for two diff QUESTIONS)
iPod 30GB W/ Video (white) Windows XP Hewlett Packard Pavillion M-50I'm told that you can just get a "camcorder cable" and use it. You just need to have a mini-jack on one end, and RCA jacks on the other end. Ask for a "camcorder output cable."
The trick is -- and this is important -- that the video will not be on the output cable that is labeled "video." If you get an official Apple iPod video connector cable, the cables will be labeled correctly, but using a generic "camcorder cable" means you will just have to try each of the three cables until you find the one that works with the video. Then the audio cables will be easy to figure out. -
I am trying to work with a series of vi's developed in Labview 8 in Labview 7.1. The code was saved with the 'Save for Previous Version' option available in Labview 8. When trying to use the code in LV7.1 my entire Windows XP system locks up (cursor freezes). Are there any ideas what's going on and how to fix this?
Thanks for your help!
MikeI have seen some problems with the save for previous option in the past. Instead of saving the entire hierarchy, try seperating the code into several different pieces and saving each piece individually. Then, see if you can open the different pieces in 7.1.
If that doesn't help, you should post some more details, like when exactly does it lock up, does it have things like DLL calls, and maybe attach the code.
Try to take over the world! -
Do I need flash builder 4 to work with the flex sdk?
Is it necessary to use flash builder 4 to work with the flex sdk?
Can you build apps just using the open source flex sdk. If so are there tutorials and books on how to do so?
Thanks in advance for your help.No, you don't need Flash Builder to use the Flex SDK. If you download the SDK and unzip it, you'll find a 'bin' directory that has the mxmlc compiler in it. You can compile Actionscript or MXML files using that.
./mxmlc MyFlexApp.mxml
If you are building an AIR application, you will use amxmlc
./amxmlc MyAIRFlexApp.mxml
Then, launch your AIR application using adl
./adl.exe MyAIRFlexApp-app.xml
Hope this helps,
Joan -
Wifi is not available where I come from. I have broadband connection where data transmission is through cell sites then to USB modem connected to a computer. The modem draws power from the computer. Will this setup work with the ipad?
iPad requires Wifi (or 3G /LTE) to connect to the Internet. You cannot connect a USB modem to the iPad.
You can create your own WiFi hotspot through your computer for your iPad to connect to, if your computer supports this functionality. All Wifi Macs and many Wifi PCs do. Check your computer manual for how to do it. -
HT1338 where is the update for aperture to make it work with the updated os x yosemite
where is the update for aperture to make it work with the updated os x yosemite
The currently sold version of Aperture at the AppStore, Aperture 3.6 is compatible with Yosemite.
See the Release notes: Aperture 3.6 Release notes
If you are running any version of Aperture 3, you should be able to update to this version. Does the update not show for you?
The update has been shown automatically for those who had upgraded from Mavericks and been running Aperture 3.5.1. Other users, who skipped Mavericks and Aperture 3.5.1 have reported problems to get the update to show and needed to contact the AppStore Support. The update did not show, if the users tried to update from an earlier version.
Maybe you are looking for
-
Hi, I have a requirement which I am trying to do it using Javascript in APEx Requirement is I need to change the content of the PL/SQL (Anonymous Block) region in apex when a button is pressed This would be generated when the page is loaded. It will
-
My apple id is disBle even after I updated my password and payment information
My apple id has been disable even after I updated passqord and payment option I dont know what else to do
-
Change SQL Server Agent service account
How can I change the SQL Server Agent service account from NT SERVICE\SQLSERVERAGENT to a domain user? and most importantly is what permissions I have to give that domain user? I know that when SQL Server setup, the installer gives the domain user (t
-
What are the standared Bi contents for Aerospace and Defense.
Hi All, Please let me know where can I find the standared Bi contents for Aerospace and Defense ( IS- A&D) in Bi system.If you have any specific material. Pla help me in this regard. Thanks kvr
-
Adding user review comments to each item
I am creating my site in Muse and then will be publishing to BC. My website will be have a least 7,000 items on it. I want to be able to have user review comments for EACH item. will I be able to do this using BC? I am guessing every item would have