Need guidance on how to prepare BI - IP  topic for certification

Hello,
I have just started reading basics of BI-IP topic. I am reading help.sap.com. I am planning to take up certification exam in BI 7.0. Can anyone guide me what kind of questions are asked, so I can concentrate on any specific area. Also if possible can anyone send me any kind of sample questions on BI- IP.
Vidya

Javaranch has some resources on the SCJP.

Similar Messages

  • My start up disk Macintosh HD is full on my McAir OSX 10.9.4 memory 4GB. I need to clear the disk so that I can update it with the new software IOS 10.9.5 requiring 2.05GB. Need guidance on how to clear space.

    My start up disk Macintosh HD is full on my McAir OSX 10.9.4 memory 4GB. I need to clear the disk so that I can update it with the new software IOS 10.9.5 requiring 2.05GB. Need guidance on how to clear space.

    For information about the Other category in the Storage display, see this support article. If the Storage display seems to be inaccurate, try rebuilding the Spotlight index.
    Empty the Trash if you haven't already done so. If you use iPhoto, empty its internal Trash first:
              iPhoto ▹ Empty Trash
    Do the same in other applications, such as Aperture, that have an internal Trash feature. Then restart the computer. That will temporarily free up some space.
    According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation—not the mythical 10%, 15%, or any other percentage. You also need enough space left over to allow for growth of the data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
    When Time Machine backs up a portable Mac, some of the free space will be used to make local snapshots, which are backup copies of recently deleted files. The space occupied by local snapshots is reported as available by the Finder, and should be considered as such. In the Storage display of System Information, local snapshots are shown as  Backups. The snapshots are automatically deleted when they expire or when free space falls below a certain level. You ordinarily don't need to, and should not, delete local snapshots yourself. If you followed bad advice to disable local snapshots by running a shell command, you may have ended up with a lot of data in the Other category. Ask for instructions in that case.
    See this support article for some simple ways to free up storage space.
    You can more effectively use a tool such as OmniDiskSweeper (ODS) or GrandPerspective (GP) to explore the volume and find out what's taking up the space. You can also delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one. Note that ODS only works with OS X 10.8 or later. If you're running an older OS version, use GP.
    Deleting files inside an iPhoto or Aperture library will corrupt the library. Any changes to a photo library must be made from within the application that created it. The same goes for Mail files.
    Proceed further only if the problem isn't solved by the above steps.
    ODS or GP can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
    Back up all data now.
    If you have more than one user account, make sure you're logged in as an administrator. The administrator account is the one that was created automatically when you first set up the computer.
    Install the app you downloaded in the Applications folder as usual. Quit it if it's running.
    Triple-click anywhere in the corresponding line of text below on this page to select it, then copy the selected text to the Clipboard by pressing the key combination command-C:
    sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
    sudo /Applications/GrandPerspective.app/Contents/MacOS/GrandPerspective
    Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window by pressing command-V. You'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator. Ignore any other messages that appear in the Terminal window.
    The application window will open, eventually showing all files in all folders, sorted by size. It may take a few minutes for the app to finish scanning.
    I don't recommend that you make a habit of doing this. Don't delete anything as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means. When in doubt, leave it alone or ask for guidance.
    When you're done with the app, quit it and also quit Terminal.

  • I need to know how to size a media server for 800-1200 user

    i need to know how to size a media server for 800-1200 user

    Please clarify what you mean. Do you already have an iPhone? If so, and it came from the US and is (presumably) carrier locked, you're out of luck. NONE of the US carriers will unlock iPhones. There are no exceptions.
    The unlocked iPhone 4S is not yet available in US Apple retail stores. All phones sold at retail in the US are currently carrier locked.

  • I have a presentation to make to a customer and need to know how many educational apps are there for the iPad/iPod?

    I have a presentation to make to a customer and need to know how many educational apps are there for the iPad/iPod? More specifically special education apps.
    Thanks

    Keep in mind as well that not all apps are "created equal".  Some are really good, and others are not very good.  You might also want to look at some education sites for recommendations.  An example of a general iPads in education forum is
    http://ipadeducators.ning.com/
    but I imagine some exist for special education needs as well.  Our healthcare organization is using some apps for working with autistic children and find them very helpful. 

  • How to prepare Block Structure data for D/A output from DIAdem

    Dear Sir:
    I'm trying to do D/A convert from DIAdem and DAQCard6062E,whereas when I located the data file to be output, and specified the channel, DIAdem gave the Error as following:
    --Error-- DIAdem
    Error from DAC simulation input file(read data file)
    The DAT file'...'must have Block Strucure!!!
    What I want to know is how to prepare or how to save my *.tdm file to a file of Block Strucure.
    Thank you very much
    jing

    Hi jing,
    i think there´s no chance to do online reading with tdm-files.
    There are two ways to solve your problem:
    1. Using the "channel simulation block" to read data out of DIAdem data cache.
    2. Store as DAT.File named in 8.3-notation using block-format.
    I don´t know the english menue-items, but all you need is in the Files.menu selection "DAT-Files".
    By the way:
    If you change the setting in the "datastorage-dialog" from "data area" to "file" for recording data, you´ll get a "playable" DAT-File.
    CU
    Martin

  • Need suggestion on how to implement UNIX SSH connector for various server

    Hi everyone,
    We have various unix servers like ubantu, redhat and mandrake . each unix type have serveral machines around 50+ each.
    I want to have one resource object for each server type
    ex: ubantu, redhat, mandrake.
    User will select on the server type and this will bring all itresources under this type.
    Also when we install the connector it gives us one schedule task for group and user reconciliation. If i plan to have one RO for each of the server type what should I do to have one schedule task for each server type
    How difficult it would be to implement this? any guidance on how to proceed with this?
    Thanks,
    asat

    Hope that this could help you.
    Managing 100s of Unix Servers using OIM.
    -INIYA

  • Need information on how to create Idoc Inbound Interfaces for Business Sys

    Hi,
    I'm losing it.
    Can anyone point me to some documentation or an example of how to create inbound interfaces for Business Systems in PI 7.1.
    Here's the scenario
    I'm working on a B2B integration process which sends inbound idocs to an ECC 6.0 system.
    I've created the Business System communication component  but under the Inbound Interfaces it is blank.
    I want to have MBGMCR.MGBMCR03 as an inbound interface.
    But I forget how to get it there.
    For Business components you can just add the inbound interface.
    I've already defined the Business System in the SLD pointed it to the correct Tech System, imported the idoc definitions in the Enterprise Service Builder and set up IDX1, IDX2 to ensure the metadata exists in PI.
    But for Business systems the hep says that it's got to come from the SLD.
    Outbound/Inbound Interfaces
    For each business system, the interfaces that are installed on the business system are also entered in the SLD. These interfaces are displayed in this frame. You cannot add any other interfaces.
    I know I've done this before, but I can't remember how.
    Cheers,
    John

    Hi John ,
    Please have a look at the following links which might be of help to you
    PI 7.1 IDocs interfaces act as operations
    http://www.sdn.sap.com/irj/scn/weblogs;?blog=/pub/wlg/7933
    /people/peter.gutsche/blog/2008/10/27/what146s-new-in-sap-netweaver-pi-71
    There is a section in the following link on IDOC , have a look at the links in that section
    https://wiki.sdn.sap.com/wiki/display/XI/ImportantBlogsand+Notes
    Best Regards

  • Need document on how to create write back template for 11g

    Can anybody provide documentation on how to create write back template for OBIEE 11g?
    Thanks

    Can anybody provide documentation on how to create write back template for OBIEE 11g?Yes! Oracle does. How about you start by reading it? I will give a hint, it's on the System's Administration guide.

  • How do you start to study for certification apple when you purchase the applecare tech training

    Not sure where to start if you do the online study courses don't you need another computer and some tools to start with for practice?

    http://store.apple.com/us/product/MA714 
    Whether you will need a computer and physical tools for practice will be up to you, but yes, those will usually be helpful. 
    Regards.

  • Upgrading hard drive... need help on how to prepare current CS6 for reinstall on new hard drive

    I'm about to upgrade my hard drive to a larger one and will need to reinstall my CS6 Web/Design Suite... I've seen many people having issues with activation and licensing after they reformat their computers or buy a new one and try to install the programs on the new "system". How should I go about preparing my Adobe software on the current hard drive so I won't have any issues resintalling on the new hard drive? I will be installing CS6 Student/Teacher version on Windows 7 Pro 64-bit...
    Thanks for the help!

    Thanks!
    I wondered if that was all I needed, but when I built my new system and installed PS CS4 I kept getting errors. So, I went back to the old system and deactivated it and still got errors. Uninstalled it deactivated and still got errors on the new system. When I talked to Adobe they just kept telling me the key was invalid (even though I had been running that same program and key for the last 4 years without problems lol) and it was not a burnt copy or pirated. I had the orginal box with the original DVD case and serial number on the case... A friend of mine had upgraded their rig and went to a Suite so he gave me his CS4. But, needless to say (as it is said all over these forums apparently) Adobe was of no help at all so I had to buy a new version. I'm not looking to go through all of that BS again, haha.
    So as long as I deactivate the Suite (or do I need to deactivate each program separately?) I should be able to reformat (or upgrade hard drives) and reinstall CS6 as many times as I want? (I usually do a reformat like once a year to keep my computers clean and free of junk that may have been downloaded by other household members...)

  • Need guidance on how to go about creating such a program...

    Hello
    I am working on a bonus project for one of my courses. However, I am a bit lost.... I just dont know how to go about doing it. I mean, I have some ideas but I am SURE there is a more elegant way of doing it.
    Option 1
    1) Design a visual tool that will allow the user to interactively create a syntax graph.
    2) The tool will then convert the syntax graph to Extended BNF
    Option 2
    1) Design a tool to read Extended BNF grammar and convert it into syntax graph.
    I am leaning on doing Option 2.... any insights will be much appreciated.

    Hi Ade,
    1. First off SHTEST and SHDISC schemas should reside on the same database. 2. You have to create end user layer in your SHDISC schema (you should give the rights required) using Discoverer Administrator tool. EUL tables get created in SHDISC schema.
    3. Using Discoverer Administrator you need to pull the structures from SHTEST. Once you open your Discoverer Administrator, you will see a little window with "Administration Tasklist".
    Anyways, the best place to get information related to this is from Discoverer Administration Guide. Then you might want to checkout the details on reporting tool Discoverer Plus/Discoverer Viewer or Discoverer Desktop based on what you choose for building your reports.
    Hope this helps,
    -Esther

  • Need guidance on how to attach forms home in shared APPL_TOP

    Hi
    I am on 12.1.3 and need to register the forms 10.1.2 home with the installer. The problem is that it does not seems to be that straightforward when it is a shared appl_top(2node), which was cloned from a single node config.
    What is the correct way to register the oracle home on both nodes, syntax-wise?
    Kind regards
    Vaughan

    847305 wrote:
    Sorted. I had my inventory pointing to the wrong location.Thanks for the update and for sharing the solution!

  • What happened to MPEG2? How to prepare material in FCP for DVD Studio Pro?

    I have made DVDs using DVD Studio Pro before when usig a manual that my teacher had put together. It all worked fine. After preparing my videos on FCP I exported the material "Using Quicktime Conversion" and selected MPEG2. But thats no longer an option! How do I go about burning DVDs now?
    Hope someone have time to answer.

    Either:
    - export to Compressor, select your settings from its options then drag the generated video and audio files into DVDSP
    or
    - export a quicktime file using 'current settings' and drag that directly into DVDSP. DVDSP uses Compressor internally to generate the audio and video files.
    If you decide to let DVDSP do the encoding, you need to read through the manual to find the section where you set the bitrates and output files.
    x

  • How to prepare 2009 MacBook Pro for sale

    I am selling my MacBook Pro with OS X version 10. 5. 8.  And want to erase all my personal files and saved passwords from the computer. How do I do that? I'm not very tech savy either, so I would appreciate any help.

    KristinaHerb wrote:
    I am selling my MacBook Pro with OS X version 10. 5. 8.  And want to erase all my personal files and saved passwords from the computer. How do I do that? I'm not very tech savy either, so I would appreciate any help.
    If it still has 10.5 Leopard on the machine use the 10.5 factory disk, else use the 10.6 Snow Leopard retail disk you upgraded with at one time, or if the 10.5 disk no longer works.
    The 10.6 disk can be gotten from Apple's online store. The 10.5 disk is obsolete, but good enough for your purposes provided it works.
    1: Backup any information and user files you want to preserve to a external storage drive. (not only TimeMachine!)
    2: If your going to use a Windows PC in the future, then take the new/soon to be erased drive to the oldest Windows version you plan to use the drive with and right click and format exFAT.  (not NTFS, not exFAT on the Mac as it might not work on Windows)
    If all your files are under 4GB in size, you can opt to format it FAT32 (or MSDOS as Apple calls it) on either a Windows machine or a Mac. Any files over 4GB in size needs the exFAT format on Windows.
    If you plan on getting another Mac, then you can format the drive the default format it gives when you erase in Disk Utility (in your Applicaions > Utilities folder), whatever OS X version your using as newer Mac's operating systems are backwards compatible with older drive formats.
    3: Once the files are backed up (drag and drop copied to the external drive, unmouned and physically disconnected), stick the 10.5 or 10.6 disk into the machine and select the Restart command from the Apple menu and quickly hold the C key down. (you can also hold the option/alt key for Startup Manager and wait and click the arrow).
    You then boot from the disk itself, it takes longer. If it doesn't work or gets stuck, just press and hold the Power button down for a hardware shutdown and press to boot normally again, eject the disk.
    4: Once you have booted from the installer disk, the second screen in at the top menu is Disk Utility, select that and then your drive makers name and size at the top right.
    Click Erase and Secure Erase select "Zero All Data" and click Erase. (If you need military style scrubbing, then select 7x overwrite) come back in a few hours. Quit Disk Utility.
    5: Now back in the Installer, select your drive and click to install OS X. When it's finished it will reboot and your at the "Welcome video" press and hold the power button to force a hardware shutdown.
    The Mac is ready for resale for the next owner.

  • I'm a dancer and dj and need to know, how do I play a playlist for a gig and have each song stop before the next one starts?

    HI,
    Please tell me how I can use my ipod touch, using the selected playlist and have each song stop after it ends before going to the next?
    I'm a dancer, so it's hard to dj and dance at the same time.  I don't want to hit pause!
    Thank You,
    Natasha

    Many restrictions are intended to defend against kids who are trying to bypass controls and break into the System to run their own software from CDs or external drives. If you don't need those restrictions, you can turn them off and allow external drives to be mounted and show up.
    Parental Controls is definitely worth looking into. If it does not offer enough controls, There are additional restrictions that can be applied.
    These all come from the world of Mac OS X Server as it is used in Schools, and are applied in a completely non-intuitive way. You use the WorkGroup Manager tool from the Server Administration package (which normally restricts features of Users on a Network) to apply additional restrictions a local User.

Maybe you are looking for