Need guidance on program changes for SAP Archivelink 4.5

We are upgrading SAP Archivelink from 3.1 to 4.5. We need to determine what types of changes we need to make to our custom archiving and retrieval programs  so they will work with SAP Archivelink 4.5. based on reading the SAP Archivelink 4.5 implementation guide, it appers the programs will need to be re-written in HTML. Has anyone worked on making changes to archiving programs used with SAP Archiveline 3.1 which will be used with 4.5?
Please let me know the major types of changes you needed to make, and the level of effort involved.
Thank you for your assistance.

Hi Senthil,
Can you tell me which functional module your worked as "Analyst"?
Job market: New Dimensional products are picking up largely in US like SAP EWM, SAP EM, SAP TM, SAP CRM Sales and Service, SAP IS-Utilities, SAP IS-Retail etc.
SAP ECC - SAP SD, MM, FI and HR are always have market in US but competition little bit high if you go for an interview.
Simple way is to go to top 5 job portals in US, prepare excel sheet which areas have been posted in last 6 to 12 months.  Take analytical report which one seems picked up and largely asked.
You will come to know at least 3 or 4 modules currently hot in US market.  Also, talk to 5 to 10 outsourcing companies friendly then request them which one they are not getting candidates and which module is very niche in market.  They will you guide to arrive one or two modules in the last.
Now you have narrow down to choose the option .
Best of Luck.
Regards
GGOPII

Similar Messages

  • Need guidance to choose the correct SAP module

    Hi All,
    I need some of your valuable inputs on which module to choose in SAP keeping in mind the current market trend .
    I have 3.6 years of expereience till now in different open technoligies(java,pl/sql).Now i would like to change my technology into ERP area.I'm Post graduate(MCA).
    Going ahead which module should I choose and work upon which can give me better career perspective (Both scope wise and salary wise).
    I don't have any idea on SAP concepts except its having two categories(Technical,functional).Don't know whether i can eligible for functional also.
    So during all my 3yrs of exp, i have done little coding only.I'm comfortable with normal coding only not having familiar with complex code.
    Since i'm a beginner/learner to SAP,guide me a better career option which will play a vital role in my decision.
    Please guide me.Expecting more suggestions please.
    Edited by: Bachi003 on Mar 25, 2010 12:35 PM

    Hi Deva.......
    Welcome to SAP Forum........
    As you mentioned you are SAP Business One Consultant and now you want to switch to R/3.
    So you have to evaluate your interest and expertise in which module of SAP B1 do you have?
    If you are strong in Financial and Banking Module then you must Opt FICO for R/3 and if you are strong at Logistic part then you have to Opt for SD/MM/PP.
    If you are good at Admin and Networking Part then you have to go for SAP BASIS. if you are strong in Payroll then you must Opt SAP HR.....
    So you have to only decide where you have o go as per your Expertise.......
    Regards,
    Rahul

  • Public-real IP changed for SAP Router

    Hello,
    The real IP for SAP Router system has changed, therefore I would need to re configure the same.
    I have gone through existing threads, but not throwing much light related to my query.
    I tried to reconfigure, but when generating the certificate I get below error. The /usr folder is the old folder of the router and am trying to reconfigure in folder is /newrouter. The OS is windows server 2008.
    D:\NewRouter\ntintel>sapgenpse get_pse -v -r certreq -p local.pse "CN=<hostname>,
    OU=0000872340, OU=SAProuter, O=SAP, C=D"
    Got absolute PSE path "D:/usr\local.pse".
    get_pse ERROR: PSE already exists "D:/usr\local.pse"
    I have already changed the environment variables for SECU_DIR and LIB one.
    My questions are :
    1) Is there any way to just update the ip address on the market place by just opening the ticket at XX-SER-NET OR do I need to perform the whole procedure after uninstalling previous configuration.
    2) What is the method for uninstallation of SAP Router?
    Thanks.
    Sat

    Hi,
    Thanks for your reply.
    Actually I changed the env variables and after restarting the sapgenpse command worked.
    But I did not proceed further.
    I have informed SAP to update the new ip address.
    My query is what action should I perform at my end instead of reconfiguring the router again.
    Thanks.
    Sat

  • I bougth the sf2 program change for garagaband, but what is it exactly and how do I make it work?

    I couldn't find out what exactly the sf2 program change is, but it seemed nice, so I bought it, hoping that it would explain itself when installed. It hasn't. I did hope that it would give me some more midi instruments, and it seems like it should, but how to get them into garaband (10.0.2)?
    This thread seems to explain it: How to do use Soundfonts (.sf2 files) in GarageBand 10?
    It says I can add "audio unit plugins" to a track. Now I don't know what an audio unit plugin is, but I assume that it is a confusing word for a sound, and that it refers specifically to the sf2 sounds. I got as far as the smart control inspector but then "Click an empty part of the Audio Units area, choose Audio Units, then choose a plug-in from the submenu." What is the audion units area? I have clicked the empty part of whatever I could find here, but there is no submenu anywhere.
    Is there anybody out there who could give a really basic explanation of what it is that I have purchased and how I can make it work? I would really apreciate it.
    Ahston

    I got a bit further. I found the submenu and I am able to load a default instrument. But I cannot change that instrument to any other.

  • Naming changes for SAP business systems

    Hello
    I have developed my interfaces in which most of them are from SAP to third party. We have SAP configured with its SID as the business system (e.g. DC1). Now we are planning to change the name of all the business systems in SLD. I deleted the previous business system from the SLD and created the new one according to newer standard and configured receivers based on it.
    My problem is when I am posting the message through ABAP proxy its still taking the SID as the sender. As a result its not finding the receiver. Do I need to configure the sender in my source ECC system?
    Thanks in advance.
    Regards
    Rajeev Patkie

    Hi Rajeev,
    The Business system details like the client and logical system etc, help the proxy to know where it has to go.
    Not for the sender system from where you are executing the PRoxy will have a Business system .Please check if the information is for the Business system can be seen correctly in the ID>BS>service-->Adpater specific identifiers.
    Also you sender XI adapter is attched to this Business system.
    No what is your receiver? You haven't specified that?
    Also, you can just reactivate the PROXY once.
    Cache refresh??
    Regards
    Vijaya

  • Font and font color are getting changed for  SAP R/3 report in portal

    Hai,
    We are using ITS 6.2 patch 26 and EP 6.0.
    When i run a SAP R/3 4.6C report in ITS 6.2, the report content are shown in Courier New font with blue color.
    When i run the same report from portal, the report content are shown in Arial font with blackish blue color.
    Can anyone tell why in portal the font attributes are getting changed and how to have the same font attributes in portal also.
    Regards,
    H.K.Hayath Basha.

    Hi
    Please go to System Administration -> Portal Display -> Themes.
    You can change the font type , color and size from here and have to properly assign it to the Desktop for the users for which these font should be displayed .
    Please check the following links :
    http://help.sap.com/saphelp_nw04/helpdata/en/26/3df46c0584cd4eb31e91aa7bcf1893/frameset.htm
    Edited by: purav mehta on Dec 16, 2007 6:01 PM

  • Custom change document is not tracking changes for SAP tables

    Hi gurus,
    I have created a custom change document for tables EKBE and KONV. But the change document is not tracking changes in BDCP table for changes in EKBE or KONV.
    Please help me out.........

    HI,
    Use this link for change pointers concept.
    change pointers
    let me know if u have any issue.
    ~linganna

  • Version management for SAP Screens?

    Hi,
    I need to do version comparison  for sap screens .
    My source system is R/3 4.7 & Target system is ECC 6.0.

    For front end SAPUI5 CODE in Elipse or RIVER RDE you can use GIT which is pretty standard way of doing code management. Once you push the code to GW it is in BSP and then you dont have much control on the version management side. If there are multiple developers working on front end code then you can push to GW using ABAP Team Provider plugin in Eclipse that pushes the sapui5 code to BSP via workbench request and once 1 developer is done then he/she will submit the code. the next person then does the GET from GW into their Eclipse to get the latest version of source code. But if there are 10 changes to the sapui5 code then on front end side you should use GIT or BitBucket or MS Team Share kind of source code control tools that integrate with ECLIPSE.
    For oData Service you can do version management in ABAP stacks. you can have multiple versions for your service and then deploy to prod the one that you are sure of. Std change management can be used for backend GW service development.
    thanks
    Ashish

  • Urgently required Good Installation Document for SAP Solution Manager 4.0

    Hello Experts,
    Iam implementing /installing SAP Solution Manager 4.0 in our scenario in a day/two. My query is tat do we need to install it APAP + JAVA based only or can we install it ABAP based only?
    Secondly i needed good self prepared document for SAP Solution Manager 4.0 installation which gives me step wise step procedure in detail.Plz dont give service marketplace link as i hv already seen and checked installion guide over it ,act. i wanted self prepared doc which is of more use. The useful answers shall be surely awarded points. Requested to revert at earliest as i need this guide in a day itself.
    My Email Id is [email protected] .
    Regards,
    Saumya

    Hey Somya,
    Can u plz send me the configuration guide of change request management that Rakesh had sent to you..
    My Email-id is [email protected]
    Plz its urgent, let me know if u want me to open a new thread so that i can reward you with points..
    Tnx in advance.

  • Training and certification for SAP cloud for customer

    Hi,
    I want to know if there are any professional training and certification available for SAP C4C.
    Thanks

    Hi Shweta,
    yes there are professional Training for SAP C4C. For example following courses are advisable.
    C4C50 SAP Cloud for Customer – Integration with On-premise SAP Solutions
    C4C30 SAP Cloud Applications Studio
    C4C10 SAP Cloud for Customer - Project Implementation No rating available
    Goto Site: https://training.sap.com/shop/sap-search/scheduled-courses?q=c4c
    At the Moment SAP finish the C4C Certification Program. So they say it will come in Q1/2015.
    You can watch the Progress for the Cloud certification program on SCN in this post:
    http://scn.sap.com/community/training-and-education/certification/blog/2014/12/18/exciting-upcoming-changes-for-sap-cloud-certification
    I hope this Information helps you
    Kind regards
    Carola

  • Feature request: Showing Program change # in addition to Patch & Set names

    Right now, MS2 is pretty much designed to step forward and backward through patches and sets. Although you do assign program change numbers to each patch and you can set a text box on screen to display the program number once you have selected the patch, it would be nice if we could add a third column in the Set - Patch selection module that also shows the program change #. Having this information displayed on the screen would give you a quick reference of the number that needed to be chosen to jump directly to a patch instead of relying on stepping forward or backwards to get to the patch you want to play. Right now, when I am configuring a concert, I load in previously used sets that included patches that will be played for that song. If we had this information displayed on the screen, we wouldn't have to worry about changing all the program #'s for each patch, since we could just use the same program # we assigned to the patch when we first created it.
    In fact, taking this approach one step further, we could view all of our user patches along with their respective program change numbers just like you can on a hardware sampler or synth.
    I don't know if this is something that could actually be done using text boxes or such that are connected to the program change number, but if someone has a suggested I would be interested.
    thanks

    Having a way to quickly renumber the program changes for the patches would certainly be helpful. However, what I am interested in is a way to display the program change number right along side the patch name in the patch / set list combo box. I know there is a way to display the program change number by itself that displays the currently selected patch, but that doesn't help me either (other than to verify that I have selected the right patch).
    What I am trying to do is to avoid having to change the program change numbers each time I set up a concert. I would like to create a patch, assign a specific program change number to it, and save it as is. Then when I build my concert, using Set's as placeholders for each song, I can see what the program change # is needed to change to a specific patch. This also means that I can assign that specific program change # in my pedal board so that whenever I use that patch in a Concert for a gig, I can call it up on my pedal board as well without having to change anything. I guess I can still save each patch with a unique program change # and then make a notation on my music what program change # I need to select on my pedal board, but it would be nice to have the pc #s displayed so I can just jump to it on the fly without having to previously know what the number is.
    (I am probably making this more complicated that it needs to be ...)
    Thanks

  • Listen to program change on single midi port?

    Hi,
    I am trying to control MainStage via program change messages. Is there a way to make MainStage listen to program change messages only on a single midi port? It seems like MainStage switches patches no matter on what port or midi channel program changes arrive.
    Thanks
    Jens

    Yes, that would do the trick if I did not want to change MainStage patches remotely. I should have made clearer what my setup is and how I want to use MainStage:
    I have two ot three keyboards attached to my Mac via USB. When I change programs on one of them, a small application that I made myself recieves it and sends program changes to the other keyboards. It also loads MidiPipe setups that I use to route midi data to and from the two keyboards and to another sequenzer. So all keyboards need to be connected and program change messages have to be sent. My goal is to have that application also switch MainStage patches. Because I need to rearrange the patches in my 'master' keyboard frequently, I need to have MainStage respond to the program changes from my app and not to the ones that are sent from the keyboard, so that the right sounds are loaded indepently of what the order of patches in the keyboard is.
    But I think it just can't be done with MainStage that way. I think it should be a very basic thing for every midi application to choose where to recieve its data from. I thought maybe there is a hidden preference or something. But it seems like I have to wait for MainStage 2 because I need to have program change messages arrive at the computer. Maybe then it supports AppleScript to change patches this way.
    Thanks anyway
    Jens

  • To retrieve SCC4 changes for a month

    Hi,
    We need to retrieve SCC4 changes for every month.
    For this, we will have to run program RSVTPROT for table T000. Since we need this data on 1st calendar day of every month, we are scheduling a monthly job for the same.
    We are facing problem while giving 'variant' for this job. Our requirement is that the report should run against a dynamic variant where the SCC4 changes for the past month is retrieved. While creating this variant we can give a particular time period only.
    Please advise.
    Is there any way we can create such a variant or we will have to schedule a job manually on every last day of the month with a new variant for that time period.

    You can use selection variables which dynamically calculate the FROM and TO dates based on the current data or an option such as "First day of the previous month" etc.
    I don't see any problem, except that this is not specifically security related. Perhaps a "Did not read the documentation forum" is needed for it...
    Cheers,
    Julius

  • Urgently required Crystal Reports 2008 FixPack_03 for SAP B1 8.8

    Dear All,
    I Urgently need Crystal Reports 2008 FixPack_03 for SAP B1 8.8. It is unavailable on the following link:
    Crystal Reports 2008 Reference [original link is broken]
    I have also searched it but unable to find it. If anyone has this, kindly share it.

    Hi Iqbal,
    There is a service pack in the following link
    https://www.sdn.sap.com/irj/sdn/businessone?rid=/webcontent/uuid/807d22cb-cb1d-2b10-8794-fb76d7feca88 [original link is broken]
    There is a fix pack 03 included in the folder, I don't know if this is relevant.
    Cheers

  • Integration kit for SAP BOE 4.0

    Hello,
    We are trying to set up Bobj environment with SAP BOE 4.0 and integrate it with SAP BW . For doing that we need to install Integration Kit for SAP. Could anyone please let me know what is the latest version of the integration kit that can be used along with the installation of SAP BOE XI 4.0
    thanks,
    Siddhu

    Hi
    I can confirm that in SAP BusinessObjects 4.0 the Integration Kit is integrated in the main product and that there is no separate install for it.
    I believe you should be able to access the manuals for  SAP BusinessObjects 4.0 on service.sap.com.
    Kind Regards
    Roland Hoeller

Maybe you are looking for