Need hard drive replacement instructions

anyone know where i can get instructions for replacing a hard drive in a G4 15" macbook pro? this is not covered in the manual that came with the computer.

And when you do determine which specific model you have:
[http://eshop.macsales.com/installvideos|http://eshop.macsales.com/installvideos >
(One of the reasons why these guys are so often recommended. )

Similar Messages

PowerBook G4 (Gigabit Ethernet): Hard Drive Replacement Instructions

Hi, the instructions indicate the hard drive is replaced via removal of the back 8 screws with a torx t8. However, on mine the screws are way smaller, and none of my torx fit it. they are really small and look like + that.
ANy ideas?

You seem to have bad instructions. Use these from iFixit:
http://www.ifixit.com/Guide/Mac/PowerBook-G4-Al-15-Inch-1-5-1-67-BT-2-0-LR/Hard- Drive-Replacement/64/8/Page-1
You need a #0 Philips and a 1.5mm hex, despite what iFixit says on the first page. They correct themselves later on. No Torx involved.

Can i use seagate goflex 3tb external hard drive for 2010 27" imac internal hard drive replacment if i take it out of the goflex case.do i need to format it before installation due to it allready having goflex software on it from manufacturer.

i have 3tb seagate goflex external hard drive.its brand new in package.i took it out of case and deleted partitions that were created by manufacturer.so now i have 2800 gigs.its formatted ntfs.will it work for late 2010 27" imac internal hard drive replacement.i found a apple repair place that will charge me 50$ to swap drives for me assuming i have the drive.i will have to install leopard myself at this price.i dont want to have to pay for anything other than the swap.will this hard drive work with this format or do i need to format it differently.

Hello
formatted ntfs
NTFS format not work on mac system , need to be formatted as Extended Mac os Journaled format and partition table need to be GUID
how to do that in video
HTH
Pierre

So I had photshop cs5 installed on my pc...i had to get my hard drive replaced! I have the serial number and everything, but I need to know how to download it. I really don't wanna have to pay for the program over again.

So I had photshop cs5 installed on my pc...i had to get my hard drive replaced! I have the serial number and everything, but I need to know how to download it. I really don't wanna have to pay for the program over again.

If you registered your product, you should be able to find the download and serial number from your Adobe account.
https://www.adobe.com/account.html
Otherwise:
Download Adobe CS5.5 Trials: Direct Links (no Assistant or Manager) | ProDesignTools
You might still have to contact Customer Support to reset your Activations, unless you managed to deactivate the original installation.

MacBook Pro won't reboot. Get spinning circle even after hard drive replaced at Apple Store

MacBook Pro won't reboot. Have to reinstall OSX each time I shut down in order to get it to start up. What could be wrong? I had the hard drive replaced already.

You shouldn't be using the disc at all. I thought I had made that clear. Boot from your recovery partition and run Disc Utility. If you get the same result -- the internal drive can't be repaired -- then you should consider replacing it. No storage device can be trusted, in my opinion, after throwing an error like that. But whether you choose to replace it or erase it, you have to get the data out first.
There are several ways to back up a Mac that is unable to fully boot. You need an external hard drive to hold the backup data.
1. Boot from your recovery partition (10.7 or later), a local Time Machine backup volume (10.7.2 or later), or your installation disc (10.6.8 or earlier.) Launch Disk Utility and follow the instructions in the support article linked below, under “Instructions for backing up to an external hard disk via Disk Utility.”
How to back up and restore your files
2. If you have a working Mac, and both it and the non-working Mac have FireWire ports, boot the non-working Mac in target disk mode by holding down the key combination command-T at the startup chime. Connect the two Macs with a FireWire cable. The internal drive of the machine running in target mode will mount as an external drive on the other machine. Copy the data to another drive.
How to use and troubleshoot FireWire target disk mode
3. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.

Time Machine Problem after Hard drive replacement

Hi all,
I am new at this so thanks in advance for any help or direction. I am running Mac OS X version 10.6.8 on an iMac and am having troubles with my Time Machine since having my 1 TB hard drive replaced under the Seagate recall. Specifically, the store somehow cloned my drive during the replacement process but now when Time Machine runs it doesn't recognize its prior backups as belonging to itself, starts to perform a full backup and then realizes it runs out of room as shown above.
I am backing up wirelessly to a 2012 dlink network attached storage device and it was working perfectly before having the hard drive replaced. The first time took ages but since was working fine. I have spent 3+ hours on the phone with apple support to no avail (trying to associate the old backups with TM and then just trying to delete them to start over..,) and have since been working through the Pondini pages of troubleshooting TM solutions.
Specifically, I have followed the instructions on http://pondini.org/TM/B6.html going through the green box steps 1-5 successfully first, but then I am unable to complete the process to inherit or associate the old backups (either pink or blue box) due to this error.
If I cannot associate the old backups with this 'new HD computer' then I think that I need to erase all prior backups so that I have room on the NAS to start TM backup from scratch. However, this is problematic as I cannot 'see' the old backups to try to delete them through Time Machine itself as the computer does not see itself as existing on the timeline prior to the HD replacement date. I therefore need a way of deleting the whole thing but clearly not through Finder or Terminal from problems mentioned by doing this in prior posts.
My NAS is partitioned so that all the Time Machine Backups were supposed to be just in one part of the NAS, separate from the stuff we were archiving from several other computers....(I cannot just reformat the entire NAS). From reading many of the Pondini troubleshooting posts I think that I need to do something to delete the whole sparsebundle? and think I have located it (see image below) (although I am not sure if it is the one from my prior successful backups prior to Nov 18 or from the more recent failed attempts).
I am carefully reading http://pondini.org/TM/12.html about deleting but at this point am a bit confused as to the best course of action.
Ideally, I would love to successfully tell TM that it has already backed itself up and that the Backups.backups folder belongs to it and not some other computer, so it can just proceed with updates.
Failing that, I think that I would try to delete all prior backups to free up the entire 1.87 TB that are designated and apple formatted for TM on the NAS and then restart TM from scratch.
Not sure if the Backups.backups folder that I have identified has all the info from before November 18th and then could be used to restore itself as I cannot see it through TM.
Thanks for the advice in advance. I would be grateful for any assistance and I am sure others having their hard drives replaced would also benefit.

Hi all,
I am a bit disappointed that nobody has offered me any help! Please? Pondini?
Thanks

Time machine won't back up since I have restored from time machine following hard drive replacement. I am being told there is not enough space, however the back up is less than the hard drive size

We recently had the hard drive replaced on our Mac as part of Apple's replacement programme. Prior to sending it off for repair we did a final Time Machine back up, which was completed successfully. SInce getting the computer back we restored everything from the backup disk using Time Machine, which all worked fine, however now we are having problems with it completing regular backups. We receive a message each time telling up that the backup disk doesn't have enough space on it. It is telling us that it needs in the region of 370gb and only has around 30gb available. The computer hard drive is in the region of 350gb and the hard drive is a 400gb one. It is almost as if it is not recognising that the data already on the disk is the back up of this computer and is trying to complete a completely separate back up as opposed to just updating the backup already on the disk.
Has anyone else got any experience of this and therefore could give me some hints on what to do. I am reluctant to wipe the backup drive and start again, however I would prefer not to have to buy another hard drive if I can avoid it as this one is technically big enough
I look forward to getting some responses

Hi, I never use TM myself.
Have you looked through Pondini's extensive TM help site?
http://Pondini.org/TM/FAQ.html
http://pondini.org/TM/Troubleshooting.html
Can't imaging something not being covered there.
PS. It's generally recommended a TM drive be at least twice the size of your main drive.

I had to get my hard drive replaced from Apple, I lost all of my music obviously. My question is, how can I get all my music off of my iPhone onto iTunes? Since it's a new hard drive, the iPhone isn't recognizing this as it's home computer.

I had to get my hard drive replaced from Apple, I lost all of my music obviously. My question is, how can I get all my music off of my iPhone onto iTunes? Since it's a new hard drive, the iPhone isn't recognizing this as it's home computer.

You will need to use third-party software to transfer music from your phone to the iTunes Library. I recommend Phone to Mac - Pod to Mac | Macroplant.com.

Can someone please help me re-install my Creative Design 5.5 on my Mac? My MacBook Pro recently crashed and had to have the hard drive replaced. The back up from Time Machine is not reinstalling the program. Since I have the download paid, and codes, I

Can someone please help me re-install my Creative Design 5.5 on my Mac? My MacBook Pro recently crashed and had to have the hard drive replaced. The back up from Time Machine is not reinstalling the program. Since I have the download paid, and codes, I need direction on how to reinstall -- HELP?

Hi bodegakc,
If you have the serial number then please use the below mentioned link to download the product you are looking for .
CS5.5
Also before installing Please go to Applications-->Utilities--> Adobe installers and if there is any uninstaller for CS5.5 , you can remove it and do a fresh install.
You can also use creative cloud cleaner tool before installing.
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
Thanks
Nikhil Gupta

I just had to have my toshiba laptop hard drive replaced and I am unable to move my itunes library from my ipad back to the laptop. It says it is linked to another library and I can only transfer purchased music etc and not the rest of the library.Help!

I have just had my Toshiba laptop hard drive replaced. This has resulted in all previous content held on the laptop to be lost. I wanted to try and transfer my music library from my ipad to the laptop, but it will not allow me to do so. The message is that the ipad is linked to another computer and it will only allow the transfer of the items purchased on through the ipad and nothing else. Does anyone know if the full library can be transferred back to the computer?

You need to transfer the iTunes Library from the most recent backup you made before the hard drive was replaced.
You can't transfer the full iTunes Library from the iPad back to iTunes.
There are third-party Windows applications that will transfer data from an iOS device, but they don't re-create the iTunes Library exactly as it was before.

Had my hard drive replaced and I've restored from TimeMachine backup. I have changed my username and now I can't access my old backups on my TimeMachine hard drive

I've recently had my hard drive replaced in the Apple Store.
I used time machine to backup and after I got my mac back with the new hard drive I restored all my files which are now on my computer and I can access it with no problems.
The problem is that I've changed my username (admin) and when I enter time machine, I can't access the backups of my old hard drive which is really frustrating.
A red negative sign appears on most folders. Also in macintosh HD/users there is a folder named with my old username and I get the same red negative sign in the folders.
Any idea what can be done about this?
If you need more info just ask.
Thanks in advance

Turn Time Machine OFF temporarily in its preference pane. Leave the window open.
Navigate in the Finder to your backup disk, and then to the folder named "Backups.backupdb" at the top level of the volume. If you back up over a network, you'll first have to mount the disk image file containing your backups by double-clicking it. Descend into the folder until you see the snapshots, which are represented by folders with a name that begins with the date of the snapshot. Find the one you want to restore from. There's a link named "Latest" representing the most recent snapshot. Use that one, if possible. Otherwise, you'll have to remember the date of the snapshot you choose.
Inside the snapshot folder is a folder hierarchy like the one on the source disk. Find one of the items you can't restore and select it. Open the Info dialog for the selected item. In the Sharing & Permissions section, you may see an entry in the access list that shows "Fetching…" in the Name column. If so, click the lock icon in the lower right corner of the dialog and authenticate. Then delete the "Fetching…" item from the icon list. Click the gear icon below the list and select Apply to enclosed items from the popup menu.
Now you should be able either to copy the item in the Finder or to restore it in the time-travel view. If you use the time-travel view, be sure to select the snapshot you just modified. If successful, repeat the operation with the other items you were unable to restore. You can select multiple items in the Finder and open a single Info dialog for all of them by pressing the key combination option-command-I.
When you're done, turn TM back ON and close its preference pane.

Restoring from Time Machine after 1T hard drive replacement

I am a super computer novice. I picked up my computer yesterday after having the recalled Seagate hard drive replaced. I backed up my computer using Time Machine before I took it in on a Seagate "Backup Plus" portable hard drive.
Now, when I have tried to use the restore start up, the computer recognizes that my drive is connected, but says there are no files on that drive it can use to restore the system.
I can see that there are 50GB on the disk, and when I look in it, there are files called "Macintosh HD" so that makes me think that my stuff is in fact on my external drive. why can't my computer see it?
Do I need to get a FireWire cord to connect to my computer? I'm using the USB 3.0 that came with the hard drive.
My computer had Mountain Lion when I backed it up. I think it is back to whatever OS it came with originally. Do I need to update to Mountain Lion? If I do, how do I do so without having to pay for it again? My app store is empty since my computer was wiped.
Thanks for the help, I really need it!

The first thing to do is upgrade back to ML, which you can easily do. Just redownload ML from the app store with the same AppleID you used the previous time you purchased the ML upgrade. Your purchase is tied to the AppleID you used when buying, so you can download it again (as many times as you wish) without payment as long as you use the same AppleID.
Once you have upgrade it to ML, then try the restore from the backup (which I gather was made when while running ML before).

Hard Drive Replacement

Hard Drive Replacement:
I need to replace, and hopefully, upgrade a hard drive in a HP Pavilion dv4-1318tu laptop. Can someone suggest a larger and hopefully faster drive? Kindly tell the specifications of HDD which is suitable to my laptop.

Hi,
There are many fast HDD's now and they have more CACHE. HP laptops normally use Toshiba, Hitachi, Seagate .... therfore stick with these vendors may help. Very sweet spot now is a 7200RPM SSHD or Hybrid SSD from all vendors such as:
http://www.amazon.com/Seagate-Solid-Hybrid-2-5-Inch-ST1000LM014/dp/B00B99JUBQ
http://www.cnet.com/news/get-a-1-terabyte-hybrid-ssd-for-119-99-shipped/
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

What type of hard drive replacement should i use to replace the hard drive in my first generation mac min 2005 model a 1103?

what type of hard drive replacement should I use to replace the hard drive on my first generation mac mini model a 1103? G4 1.25 mhz 40 gb hd 1 gb. mem.

You'll need a 2.5" parallel ATA interface hard drive. Most are 5400RPM, forget 7200RPM drives and slower 4200rpm drives. You don't want a serial ATA (SATA) drive, as that has a different connector and won't work.
One source I've used for drives is Newegg, and their parallel ATA hard drives are at http://www.newegg.com/Product/ProductList.aspx?Submit=ENE&N=100007605%2060000344 2&IsNodeId=1&name=IDE%20Ultra%20ATA100%20%2f%20ATA-6 . Newegg also has many user comments about the drives. Other sources are OWC at http://eshop.macsales.com/shop/hard-drives/2.5-Notebook/ (Click on ATA on the left) . Look for at least a 3 year warranty.

Imac hard drive replacement

Incredibly my rarely used 2011 Imac Hard Drive is toast. I saw they have a replacement program but even though it is way too soon for a hard drive OF QUALITY to be going out so soon as mine - mine is not included in the replacement program.
Which I have a problem with - how odd it is that they had enough trouble with these computers/hard drives to do a replacement program but mine which did the same thing, expired way too soon isn't covered. I've not had use of the computer for 4 months while I tried to fix the problem so it lasted a little over a year.
Anyway I need to know what to do to try to replace it myself as i haven't the funds to take it to Apple for repair. Plus, Apple Computers and me are history I will never buy another after spending over $1200 for a computer that's nothing more than a very large paperweight right now.
How do I know what size and all that?
I may not be able to afford even that so more than likely this is going to be a very nice looking worthless computer going to the landfill.

I Am leaning more toward Kappy's comments, based on your attitude and comments, but I will ask some questions and add some useful comments as I am in a somewhat charitable mood.
Do you still have AppleCare on this iMac?
From your rather blunt comments I assume no, but have to ask anyhow.
This is why I recommend purchasing and registering for 3- year extended AppleCare.
Because of the nature of the newer iMac designs, hardware failure seems more likely or commonplace occurrence. I believe it's more of a excessive heat related issue than anything else despite what Apple has qualified as "normal" operating temps for these iMac models.
Check out the iFixit home site and search for iMac disassembly or tear/take down. Or search for iMac hard drive replacement on the site.
Another option is for you to purchase an external FireWire 400/800 drive as your new boot drive.
Running your iMac from a FW800 drive will be about as fast as running it from the iMac's Internal drive.
If you can afford it get as large a drive as you can afford.
And just for your info, while hard drives can last for years without issue they will go bad, eventually.
Some drives crash and burn faster than others. Especiallly true of the notebook style drives that Apple installs into the newer design iMac. With hard drives, the question is not if they will fail, but when will they fail.
If you had all of your data backed up to an extra, external drive or optical discs to begin with, you wouldn't be so upset about your internal drive dying as your data still would've been intact on another drive or discs in the first place.
I Always advocate for having some sort of backup strategy for your important data in the event of hardware or hard drive storage failure.

Need hard drive replacement instructions

Similar Messages

Maybe you are looking for