Need hard drive screw part number for T500 please

I want to buy a spare screw for the screw used to screw the hard drive cover to the base of my T500 notebook.
Where is it possible to find the part number so I can buy this??
What IS the part number/name I should use??
Perhaps someone knows the specific size/dimensions/etc. required to buy an off-the-shelf screw??
I tried calling support but there is no way to speak to a human to explain what I'm looking for, which is unusual and specific.
Thank you, Tom

Hi tlyczko,
The part number for the screw set is listed in the Hardware Maintenance Manual. You can buy them here.
Hope this helps, and come back and tell us how it goes!
I don't work for Lenovo. I'm a crazy volunteer!

Similar Messages

  • ThinkPad T500 Hard Drive "Holder" Part Number(s)??

    I have a ThinkPad T500 ca. late 2008, I want to buy another hard drive "holder" for it just like the one holding the existing hard drive.
    Is this available at the parts store, what are the part number(s) involved??
    Can someone please point me in the right direction??
    Thank you, Tom

    GMAC-R60 wrote:
    what does the x300 look like I've not seen one
    The X300 uses 1.8inch HDD, the rails will not be able to hold the smaller drive if it's able to hold T500's 2.5'' drive. Also, X3xx series doesn't require HDD caddy. I think this is what lead_org meant.
    Hope this helps.
    Maliha (I don't work for lenovo)
    ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
    IdeaPad: U350
    Apple:- Macbook Air [Snow Leopard]
    Did someone help you today? Compliment them with a Kudos!
    Was your question answered today? Mark it as an Accepted Solution! 
      Lenovo Deutsche Community     Lenovo Comunidad en Español 
    Visit my YouTube Channel

  • Replacement part number for (MCS7828I4-K9-BE7)

    hi everyone,
    i want to configure the mcs server (MCS7828I4-K9-BE7) on the dynamic configuration tool but it's showing me error. i guess this should be end of life/end of sales.
    what is the replacement part number for this please(MCS7828I4-K9-BE7)..thankssamson

    Hi Samson,
    This has been announced as EoL as you nicely noted, but it should be available
    via Cisco until October 6
    End-of-Life Announcement Date
    The date the document that announces the end of sale and end of life of a product is distributed to the general public. April 7, 2010
    End-of-Sale Date
    The last date to order the product through Cisco point-of-sale mechanisms. The product is no longer for sale after this date.    October 6, 2010
    Replacement;
    MCS7828I4-K9-BE7
    Unified CM BE 7.X, 7828-I4 appliance, 50 seats
    MCS7828I4-K9-BE8
    Unified CM BE 8.X, 7828-I4 appliance, 50 seats
    End-of-Sale and End-of-Life Announcement for the Cisco Unified Communications Manager Business Edition 7.1
    http://www.cisco.com/en/US/prod/collateral/voicesw/ps6788/vcallcon/ps556/end_of_life_notice_c51-597146.html
    Cheers!
    Rob

  • Need to re-install CS5.5 on my new hard drive. Serial number from disk package not working.

    I need to re-install CS5.5 on my new hard drive. Serial number from disk package not working.

    if there's a problem with the number of installations, you'll see a message about an excess activation problem.
    if that's what you're seeing, contact adobe support for an activation count reset, https://helpx.adobe.com/contact.html
    otherwise, attach a screenshot of the error message or quote it.

  • Where can i buy a hard drive caddy and connector for a second hard drive for my dv7-7190eo?

    Where can i buy a hard drive caddy and connector for a second hard drive for my dv7-7190eo?
    This question was solved.
    View Solution.

    Gurra wrote:
    Where can i buy a hard drive caddy and connector for a second hard drive for my dv7-7190eo?
    Hi,
    The right part number for the hard drive kit is 681976-001. The support website for the laptop is on HP Sweden so run the part number on google.co.uk (or your Swedish). I have found the cheapest on us amazon for $38 or £42. 
    Dv6-7000 /Full HD/Core i5-3360M/GF 650M/Corsair 8GB/Intel 7260AC/Samsung Pro 256GB
    Testing - HP 15-p000
    HP Touchpad provided by HP
    Currently on Debian Wheeze
    *Please, help other users with the same issue by marking your solved topics as "Accept as Solution"*

  • What is the correct part number for dvi to vga adapter for macbook pro model A1260

    Can someone tell me the Apple part number for the DVI to VGA adapter that came with a Macbook Pro model A1260? (Early 2008)
    My adapter has reached the end of useful life.
    Thanks!

    You have a MacBook Pro 15" Early 2009 (MacBook Pro 4,1)
    The Mac's port is a Dual-link DVI (VGA, Composite and S-video with adapter)
    The DVI connector  connects to the Dual link-DVI port,thus you need a DVI to VGA adapter.
    http://eshop.macsales.com/item/Micro%20Accessories/DVIVGA/
    You also can search the Apple store online for the part, but it's so basic and simple that paying more for Apple's version is just for looks.

  • What is the correct part number for the ac-charger for hp mini 110-1191eo (part vj213ea#uuw)?

    I need to find the correct part number for the ac-charger for hp mini 110-1191eo (part vj213ea#uuw).
    This question was solved.
    View Solution.

    Good question.
    That I don't have a definite 100% answer to.
    It probably is OK. Wattage is what it is rated at. More wattage is probably a good thing, and I have read that = or - .5v is not supposed to be an issue.
    You can do a google search of the part number for your power adapter and see if they still carry it, if you are concerned.
    Paul

  • What is Toshiba part number for Satellite Pro L20

    Morning
    Does anyone happen to know the Toshiba Part Number for the Satellite Pro L20? I seem to have mislaid mine.
    Thanks
    Si

    Hi
    I dont know which number you mean exactly but there are many different Satellite Pro L20 models which different numbers.
    All necessary details and serial numbers you will find on the label which was placed at the bottom of the unit. Please check this.
    If you need these details for part ordering or recovery cd you should contact the Toshiba service partner. There you can order all supported parts.

  • How do I determine the correct part number for a replacement topecase with keyboard?

    What is the correct replacement part number for a Macbook 13" Core 2 Duo (Identifier 4,1) s/n
           W88*****0P0 ?
    <Edited by Host>

    Hi PePe
    I made the change and it worked as I wanted it. Thanks a lot.
    You say there's no need to Maintain the Responsibilities Rule. Can I ask what this section does and why it can be one or the other?
    Regards
    Declan

  • What is the motherboar​d part number for hp dv6-3037tx​?

    I have a bricked laptop and would like to buy a replacement motherboard
    What is the motherboard part number for hp dv6-3037tx notebook PC?
    Laptop product number is WY285PA.
    And also, will the replacement motherboard be identical to the old one (i.e. same GPU). I don't want to get a new motherboard with a crappy GPU, my old one was great.
    Thanks 

    Hi:
    I can't find any specs on your notebook to pinpoint the motherboard you need.
    Below is the link to the service manual for your notebook series.
    http://h10032.www1.hp.com/ctg/Manual/c02657339.pdf
    See chapter 3, pages 22 and 23.
    If you know your processor, GPU, and what wireless device you have, you should be able to select the exact part # you need.
    Paul

  • What is the part number for T60 DVD/RW replacement?

    Hello,
    I have looked through the Lenovo support site and could not find definitive information on what is the correct part number for a DVD/RW replacement for a T60 (2613-CTO).  I don't have access to this machine at this time so I can not remove the bad drive to check for any relevant info. I'd appreciate any help in locating this part number.I only have a small window of time where I can get the part and give it to my relative.
    Thanks.

    Ah ... your "39T2851" info leads to "Marketing Part Number 41N5643", which is listed for $199.00 at http://shop.lenovo.com/us/accessories. Hmm, let's see if I can find it somewhere else cheaper.
    Thanks for your very quick response.

  • Part number for Envy keyboard

    I have an HP Envy Sleekbook, model B5Q41UA#ABA HP ENVY 6-1014nr NB PC US 
    I need to get a replacement keyboard for it. Does anyone know the part number for this keyboard?
    It's a royal pain extracting the keyboard and I've already ordered one through ebay which was the wrong one.  I've searched by model number and I can't find any hits. Often different models use the same parts, so if anyone knows another model that uses the same parts, that would be great. The keyboard part number would be the ideal solution though. 
    BTW, I spilled water on the keyboard so it's not covered under warranty. I also can't wait for the repair if I were to send it out for repair. I'm using a usb keyboard and mouse in the meantime. 
    Thanks. 
    This question was solved.
    View Solution.

    Keyboard in black finish:
    For use in the United States 686836-001
    Backlit keyboard in black finish:
    Backlit keyboard for use in the United States 687099–001
    Keyboard in black/silver finish:
    For use in the United States 692758-001
    Backlit keyboard in black/silver finish:
    Backlit keyboard for use in the United States 692759–001
    Your Service Manual:
    Manual

  • HP Docking Station EN488AA - part number for power adapter

    Hi,
    I have a HP Compaq nx8220 notebook, with a HP Docking Station (EN488AA).
    Unfortunately I have lost the power supply for the docking station.
    I still have the power supply for the notebook itself (393955-001) but it does not plug in to the docking station. It is the correct voltage but only 90W instead of 120W, and the connector is the wrong size.
    I've been looking online for the part number for the correct replacement power supply for the dock, but became very confused when I found sites advertising the same replacement part for both the nx8220 and the EN488AA when clearly they are different because the plugs don't match. None specify the plug size so I don't know which is which.
    Can anyone help me identify the correct replacement part? Or better still, is there a plug adapter available so I can use my existing power supply for the dock too?
    Attached are two photos - the plug from the power adapter next to the inlet of the notebook (fits) and the dock (doesn't fit).
    Thanks,
    EddieD97
    This question was solved.
    View Solution.

    The pin in picture looks liek a 5mm pin and one one on docking station is a smart pin. So you would need something like the one in picture in this link.
    In the picture observe the component in left hand bottom corner.
    http://www.amazon.com/HP-power-adapter-airplane-DV574A/dp/B0006VX07I/ref=pd_sim_sbs_pc_11?ie=UTF8&re...
    I would say, take the adaptor to store and get one.
    Wish you luck,
    Karthik
    --Say "Thanks" by clicking the Kudos (purple thumbs up icon in the lower right corner of a post)
    --Please mark the post that solves your problem as "Accepted Solution"

  • Does anyone know the part number for the printhead for the HP Officejet 6500a

    My printer doesn't print, initally it didn't print black, then I soaked the printhead in hot water as instructed now it doesn't print at all, so I need to replace it.  Does anyone know the part number for the printhead for the HP Officejet 6500aThank You,

    Hi Temprosal,I looked up the product specifications for the HP Officjet 6500a.Here are steps for ordering a new printhead: These steps apply to the United States only.If HP replaces your printhead assembly under warranty, you receive a new printhead assembly, cleaning materials, and a full set of new ink cartridges.If your printhead assembly is no longer under warranty, you can purchase a new one online.Go to the HP Parts Store website (in English).  https://h20141.www2.hp.com/Hpparts/CountryChoice.aspxUnder Find your part(s), type CN643A in the Search by part number text box.Follow the on-screen instructions to order the printhead assembly.Jean

  • Assembly part number for individual PXI chassis slot blockers?

    I need the individual assembly part numbers (not the catalog or packeaged kit number) for the standard 3U PXI chassis slot blockers.  The ones we have accumulated are stamped with the part numbers below but I need to know if this is the part number for the "assembly" with fasteners, or just aluminum plate.
    1 slot   185365C-01
    2 slot   185365C-02
    4 slot   185365C-04
    also is there a there 3 slot available (perhaps a -03)?
    Thanks,
    Darrow

    Hi Darrow,
    The part numbers listed above are indeed for the plates. Those three sizes are the only ones available through National Instruments; unfortunately there is no three-slot plate.
    Best regards,
    Tim

Maybe you are looking for

  • How to clear entries from a table view

    Hi All,   I am using a tableview in a BSP page. I am setting the attribute allrowseditable = 'TRUE'. The internal table I am using for the tableview contains only initial lines. Once the tableview is displayed i am entering some values on the cells.

  • TextInputCallback changing form field

    I have developed a custom security provider which works! I can get logged in AND using the TextInputCallback handler I can set form fields to access when coming in from the login page. However I can't seem to change or retrieve those values on the ne

  • Is there a proper way to config multi-line text boxes so they're compatible with all/most browsers?

    I've got forms that use multi-line text-boxes and they work fine with IE and Chrome.  A user just discovered that in Firefox the fields don't wrap (it basically appears to be a large field but acts like a single-line). Is there a workaround/fix for t

  • Quicklook, my savior!  (and other observations)

    After a few hours, I'm all installed and indexed and ready to roll. I switched to coverflow view and used quicklook and I'm blown away. This is exactly what I've wanted in a file system... the ability to basically just have a jumble of docs and be ab

  • Lots of 9.1.2 problems

    Logic keeps crashing since this update. Anyone know what this message is? This is simply trying launch Logic.... Thread 0 Crashed: Dispatch queue: com.apple.main-thread 0 libSystem.B.dylib 0x00007fff8178d3d6 __kill + 10 1 libSystem.B.dylib 0x00007fff