Need hardware configuration for server

Hi All,
Need server hardware configuration for deploying and maintaining SSAS cube. Consider OLTP size as 100 GB
Thanks,
ATRSAMS

Hi Atrsams,
According to your description, you need some hardware recommendations for deploying and maintaining a SQL Server Analysis Services cube, right?
Though this isn't a sizing recommendation, I'd encourage you to buy as much memory as you can afford. This is generally the choke point I've seen on servers, especially when using SSAS. For the detail information about it, please refer to the links below.
http://sqlblog.com/blogs/marco_russo/archive/2013/02/12/hardware-sizing-guide-for-ssas-tabular.aspx
http://www.experts-exchange.com/Hardware/Microsoft_Hardware/Q_27781248.html
Regards,
Charlie Liao
TechNet Community Support

Similar Messages

Need hardware configuration

Dear freinds,
I have to deliver the hardware configuration for the upcoming client.
they have 30 concurrent users,
OS - Windows2003 EE
DB - Oracle 10g
R3 - ECC6.0
<u>Please help to get the sizes for:-</u>
1 . Dev server
2 .Qas server
3. Prd Server on clustering
4 . IDES
5. Solution Manager and SapRouter.
7. BI - Dev
8.BI - Prd
I want to know the sapce required for each server.
Please reply at the earliest.
Thanks & Regards.

http://service.sap.com/quicksizer
check on the left side in the tree
"Using the Quick Sizer"
You also have there an "Quick Sizer Offline Questionnaire V7" so can put in the data there.
Also check there the "online help", which will explain, how to interpret the questions and what to fill in.
The user types are defined in the contract with SAP, this is also company specific.
Markus

Hardware configuration for BI 7 Cleint

Hi All,
What is the minimum hardware configuration for BI 7 Client installation?
user will use a BEx for the report analysis
Regards,
Godhuli

Hi ,
The note is currently for internal checking as it has undergone some internal checking.I am just pasting the note info in this reply.
The Business Explorer of SAP NetWeaver 2004s is supported for the Win XP and win2000 platforms. The hardware and software requirements under the different platforms are given below.
software requirement for Windows XP
   OS    : Windows XP
   Browser : IE 6.0
   Excel : 2002 and 2003
software requirement for Windows 2000
   OS    : Windows 2000
   Browser : IE 6.0
   Excel : 2002 and 2003
.Net Framework version 1.1 is a pre-requisite for the Business Explorer of SAP NetWeaver 2004s in both the platforms. It's a freeware, which can be downloaded from the Microsoft site.
Older versions of Microsoft Excel, for example Microsoft Excel 97 and 2000, are not supported. On the browser side Firefox is not supported at present.
Hardware used in this case is Pentium 4, 2.8 GHz,1 GB memory and 40 GB HDD. The Hard disk space and Min and recommended Memory usage for the Business Explorer of SAP NetWeaver 2004s is mentioned below
    HDD Space   : 380 MB
    Memory Min : 384 MB
    Recommended : 512 MB
Note: The actual memory used under Windows XP platform is 146 MB.The amount of memory used by OS before SAP GUI installation is 137 MB The amount of memory used by OS after SAP GUI installation is 283 MB
(256 MB is still sufficient for XP, but sometimes when SAP GUI is executed the system may start swapping)
you can also check service.sap.com/bi->Product Information SAP NetWeaver 7.0 - BI
Best Regards
Manoj Kumar

Hardware Configuration for Oracle DB on DELL Server

We are currently running Oracle 8.0.5 on Windows 2000 Advanced Server. This is a DELL PowerEdge 6600 server with 8 73GB Ultra SCSI Hard Drives. We will be upgrading to Oracle 9i in the future. Question: What would be the recommended Hardware RAID Configuration? We've heard that RAID 10 would be a good configuration to implement. What would be the best way for us to configure our server? We would like a high fault tolerance, good performance system. Our database isn't very large in size (10GB) but, we do require 24 x 7 availability. By the way, switching to a different operating system is not an option for us.

You've probably read this already; but, the documentation has some minimums: http://docs.oracle.com/cd/E26996_01/e18548/CHDJCIFD.html
The management server doesn't require anything special.
Regards,
Ian

Best Hardware Configuration for oracle RAC

Hi,
iam planning to implement oracle 10g and 11g rac.Can anyone of you provide me the best hardware configuration which suits the need.
I can spend a reasonale amount.
This is for homesetup,implementation and practice all major activities that's all.
So please provide me a nice coniguration.
Iam planning to install vmware server and create multiple instances in the same server
Please provide me a nice configuration which suits for implementing installing vmware server
Thanks,
Aram
Edited by: aram on Sep 23, 2011 8:08 AM

aram wrote:
Hi,
iam planning to implement oracle 10g and 11g rac.Can anyone of you provide me the best hardware configuration which suits the need.
I can spend a reasonale amount.
This is for homesetup,implementation and practice all major activities that's all.
So please provide me a nice coniguration.
Iam planning to install vmware server and create multiple instances in the same server
Please provide me a nice configuration which suits for implementing installing vmware server
Thanks,
Aram
HI,
For your home testing you might need a latest technology to get a smooth and fast installation. i7 processor might be the ideal with memory at least 8GB. if you're planning to have more than 3 VMs running at the same time than you need 12-16GB memory at least.
From my experience installing on vm and allocated memory 2.5GB each VM the installation could take 15-30minutes
Cheers

A reasonable hardware configuration for Linux OAS

Has anyone out there tried to run
Oracle 8 for Linux and OAS 3.02
all on the same toasted PC/pentium server?
Could you tell me the nature of your
hardware configuration (processor speed, ram, etc)
if you feel the performance is acceptable for
development (not for actual business operation).
The technical FAQ lists 48 megs and any
Pentium to run Oracle 8 for Linux which
verges on ridiculously low.
I just want to know a reasonable
configuration to run both Oracle 8 and OAS .
Thanks,
Heji
null

I have been runnig OAS/O8 on a Pii/300Mhz system with 128mb of
ram, and so far I have no real complaints on speed. I even tuned
the SGA to give a little better performance and still have around
40 or so MB free. BTW, I haven't really tried to mess around
with the Linux version of OAS, but have used the Solaris version
previously, have you noticed any problems with the wrb starting
up? I have seen some error messages saying "No processes..." or
something, looks like an error.. have you experienced this?
Tom Tyson
mark theodoras (guest) wrote:
: Heji (guest) wrote:
: : The technical FAQ lists 48 megs and any
: : Pentium to run Oracle 8 for Linux which
: : verges on ridiculously low.
: The install guide says 32M minimum for O8. I'm not sure with
: OAS. Given (pc) memory is cheap, I am running O8/OAS3 with
128M,
: with no complaints.
: Given laptop memory is not so cheap, are there folks running O8
: and OAS3 with 48, 40, or less ram ????
: I can second any pentium would suffice. I am using P133 & P166
: systems, and the CPU is NOT the bottleneck.
: Mark
null

Newbie in need assistance configuring iChat server (LDAP).

I needs some assistance in setting up iChat server for our office. I running LDAP and I have the iChat server basics setup and it is working, however my boss wants to set up different domains in iChat for the various departments (i. e. Accounting, Sales, production, etc.). These will not be accessed outside of the building. He states I need to configure additional search bases. It is at this point I am drawing a blank.

Hi Paul,
An intersetng one.
James Weston may be able to post more on this.
iChat can Chat to other Macs using the Bonjour option
(Click the Apple/Command key + 2 together)
Bonjour has to be enabled in the Account section of iChat Preferences.
All computers have to be in the same subnet
This is going to be the sticking point.
Lets say you have one routing device for your local net and it issues all computers and devices with IP Addresses in the range 192.168.1.xxx then all the computers on on the same Subnet as there is only one LAN.
If you have subsequent routers that change the IP addresses to somethng like 192.168.1.xxx for sales and 192.168.2.xxx fo accounts etc, then you will have subnets. Computers in 192.168.1.xxx will only see other Bonjour/iChat computers in that group and the same for 192.168.2.xxx but not from group to group.
To show up in the Bonjour window iChat takes the Address Book Me card entry of the MAc user account and broadcasts it to the other computers.
This would give you an option of using this method to pass out information where people were. The revelant "Sales" or "Accuounts" could be added to their Real Names.
(Bonjour would have problems if several computers were changed to read just Sales as the Address Book name).
An alternative would be to set up a VPN and have all computers on the same network for Bonjour independent of any of network they were on.
James knows more about networks than I do and may have other information that may help.
Ralph

Hardware configuration for 5.5

Hello Everyone!
I am a total newbie......
Anyway, I just purchased a new computer. Although many of you would laugh at what I bought, it was all I could afford. There are some good things about it and some probably not. My question is, I bought a 1.5 Tb hard drive (only 1) and I am wondering what is the best configuration for it? Should I partition it, etc.
As I said, I am a total newb at this and I am just beginning so I will not be making re-editing any motion pictures anytime soon but just taking old 8mm family stuff and working with this as my practice stage.
Thanks,
-myParkster

NEVER EVER do a partition !!!
Read http://forums.adobe.com/thread/650708?tstart=0
My 3 hard drives are configured as... (WD = Western Digital)
1 - 320G WD Win7 64bit Pro and all program installs
2 - 320G WD Win7 swap file and video project files
3 - 1T WD all video files... input & output files
Search Microsoft to find out how to redirect your Windows swap file
http://search.microsoft.com/search.aspx?mkt=en-US&setlang=en-US
Trying to use only ONE Hard Drive for Video Editing
You are a music conductor, with a baton that you use to point to various parts of the orchestra... this is like Windows pointing to various parts of the hard drive to do Windows housekeeping or to load program segments for various functions
Now, at the same time and with the same hand... while still using the baton to conduct the orchestra... pick up a bow and play a fiddle... this would be doing something with your video file at the same time as all the other work
You as a person cannot do both at the same time with the same hand
A computer is a LITTLE better, in that it can switch from one kind of task to another very quickly... but not quickly enough for EASY video editing
You need AT LEAST two hard drives (separate drives, never a partition http://forums.adobe.com/thread/650708?tstart=0 for more) with Windows (or Mac OS) and software on your boot drive, and video files on a 2nd drive so the boot drive is not slowed down by trying to do everything
I find that the three drives I use work very well for me, for editing AVCHD video... some people use a 4th drive, so video INPUT files are on drive three and all OUTPUT files are on drive four... I only bought a mid-tower case instead of a full tower case (my bad... but had to fit in the space available on my office desk!) so I use the three drives that will fit
Depending on your exact hardware (motherboard brand & model AND USB2 enclosure brand & model AND external hard drive brand & model) AND the type of video file, you may... or may NOT... be able to use an external USB2 hard drive for video editing
Steve Grisetti in the Premiere Elements forum http://forums.adobe.com/thread/856208?tstart=0 and Jim Simon in the Premiere Pro forum http://forums.adobe.com/thread/856433?tstart=0 use USB externals for editing
A USB3 hard drive connected to a motherboard with USB3 is supposed to be fast enough for video editing (I don't have such, so don't know) but eSata DOES have a fast enough data transfer for video editing... I have not used this eSata Dock... for reference only, YMMV and all the usual disclaimers
http://www.amazon.com/Thermaltake-BlacX-eSATA-Docking-Station/dp/B001A4HAFS/ref=cm_cmu_pg_ t

Hardware requirement for server

Hi,
I am a new french developper with Jdevelopper and Oracle 8i.
Could you indicate me a good configuration for the server machine for an application using JSP, EJB :
- memory ? 512 Mo is enough
- bi processor ? usefull or not really
- hard disk ? raid 0
The installation uses only Oracle8i (with its HTTP Apache server) - physically 2tiers.
Thanks you very much,

Hello,
The quorum disk needs only to have a few MB to hold the file used for arbitration. Normally if you're needing a disk vote, it can be extremely small (100MB or less is what most SANs can do, some can only do 1 GB or greater). The actual file size is a few
KBs.
MSDTC holds the DTC logs, so this will be sized to how much logging and usage of MSDTC is needed and used. If you're not using distributed transactions then it doesn't even need setup.
-Sean
The views, opinions, and posts do not reflect those of my company and are solely my own. No warranty, service, or results are expressed or implied.

Need help configuring for POF

I am trying to use POF to serialize one specific named cache only. The client nodes are configured for near caches with no local storage. I ran into a problem where I got error log complaints that another node in the cluster was not configured for POF serialization for the DistributedCache service. So, I created a new service PofDistributedCache service for use by the pof cache. That changed my errors but didn't get me very far.
Q1: If I have mixed pof / non-pof caches, to they need to use different DistributedCache services?
Q2: Does the server (back-cache) also need a <serializer> block?
Q3: Does the server need all the object classes and the classes needed to (de)serialize the objects?
--Larkin
Client side coherence-cache-config.html:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE cache-config SYSTEM "cache-config.dtd">
<cache-config>
     <caching-scheme-mapping>
          <cache-mapping>
               <cache-name>pof-*</cache-name>
               <scheme-name>default-near-pof</scheme-name>
               <init-params>
                    <init-param-name>front-size-limit</init-param-name>
                    <init-param-value system-property=foo.coherence.default.front-size-limit">0</init-param-value>
               </init-params>
          </cache-mapping>
          <cache-mapping>
               <cache-name>*</cache-name>
               <scheme-name>default-near</scheme-name>
               <init-params>
                    <init-param-name>front-size-limit</init-param-name>
                    <init-param-value system-property="foo.coherence.default.front-size-limit">0</init-param-value>
               </init-params>
          </cache-mapping>
     </caching-scheme-mapping>
     <caching-schemes>
          <near-scheme>
               <scheme-name>default-near</scheme-name>
               <front-scheme>
                    <local-scheme>
                         <scheme-ref>default-local</scheme-ref>
                    </local-scheme>
               </front-scheme>
               <back-scheme>
                    <distributed-scheme>
                         <scheme-ref>default-distributed</scheme-ref>
                    </distributed-scheme>
               </back-scheme>
          </near-scheme>
          <near-scheme>
               <scheme-name>default-near-pof</scheme-name>
               <front-scheme>
                    <local-scheme>
                         <scheme-ref>default-local</scheme-ref>
                    </local-scheme>
               </front-scheme>
               <back-scheme>
                    <distributed-scheme>
                         <scheme-ref>default-distributed-pof</scheme-ref>
                    </distributed-scheme>
               </back-scheme>
          </near-scheme>
          <local-scheme>
               <scheme-name>default-local</scheme-name>
               <high-units>{front-size-limit 0}</high-units>
          </local-scheme>
          
          <distributed-scheme>
               <scheme-name>default-distributed</scheme-name>
               <service-name>DistributedCache</service-name>
               <local-storage>${coherence.back-cache.storage}</local-storage>
               <backing-map-scheme>
                    <local-scheme>
                         <scheme-ref>default-local</scheme-ref>
                    </local-scheme>
               </backing-map-scheme>
          </distributed-scheme>
          <distributed-scheme>
               <scheme-name>default-distributed-pof</scheme-name>
               <service-name>PofDistributedCache</service-name>
               <local-storage>${coherence.back-cache.storage}</local-storage>
               <backing-map-scheme>
                    <local-scheme>
                         <scheme-ref>default-local</scheme-ref>
                    </local-scheme>
               </backing-map-scheme>
               <serializer>
                    <class-name>com.tangosol.io.pof.ConfigurablePofContext</class-name>
               </serializer>
          </distributed-scheme>
     </caching-schemes>
</cache-config>
Server side coherence-cache-config.xml
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE cache-config SYSTEM "cache-config.dtd">
<cache-config>
<caching-scheme-mapping>
<cache-mapping>
<cache-name>pof-*</cache-name>
<scheme-name>default-distributed-pof</scheme-name>
</cache-mapping>
<cache-mapping>
<cache-name>*</cache-name>
<scheme-name>default-distributed</scheme-name>
</cache-mapping>
</caching-scheme-mapping>
<caching-schemes>
<distributed-scheme>
<scheme-name>default-distributed</scheme-name>
<service-name>DistributedCache</service-name>
<backing-map-scheme>
<local-scheme>
<scheme-ref>default-local</scheme-ref>
</local-scheme>
</backing-map-scheme>
<autostart>true</autostart>
</distributed-scheme>
<distributed-scheme>
<scheme-name>default-distributed-pof</scheme-name>
<service-name>PofDistributedCache</service-name>
<backing-map-scheme>
<local-scheme>
<scheme-ref>default-local</scheme-ref>
</local-scheme>
</backing-map-scheme>
<autostart>true</autostart>
</distributed-scheme>
<local-scheme>
<unit-calculator>BINARY</unit-calculator>
<scheme-name>default-local</scheme-name>
</local-scheme>
</caching-schemes>
</cache-config>

Hi Larkin,
llowrey wrote:
I am trying to use POF to serialize one specific named cache only. The client nodes are configured for near caches with no local storage. I ran into a problem where I got error log complaints that another node in the cluster was not configured for POF serialization for the DistributedCache service. So, I created a new service PofDistributedCache service for use by the pof cache. That changed my errors but didn't get me very far.
Q1: If I have mixed pof / non-pof caches, to they need to use different DistributedCache services?Yes. You can control POF/old-style-serialization on a service by service basis only.
Q2: Does the server (back-cache) also need a <serializer> block?It is not relevant on near-cache. The scheme defining the back cache (and invocation services and replicated cache schemes) need to have the serializer specified.
Q3: Does the server need all the object classes and the classes needed to (de)serialize the objects?
If you want to deserialize the objects, then certainly they do. But with POF you don't necessarily need to deserialize entries from partitioned caches to define indexes or run entry-processors/aggregations on them. You can leverage PofExtractor-s and PofNavigator-s to do all your server-side logic, although for complex data access it may be less efficient. You do need the key classes (on cache NamedCache caller side) for being able to do operations on a partitioned cache, though.
Best regards,
Robert

Need Hardware Recommendations for FMS2

I am having a FMS2 enabled site and application built and
would like ideas on the best server setup/specs to run the site
smoothly. I expect maximum users at any one time on the site at
about 600 with about 400 concurrent FMS2 users. I will have 4
"rooms" with one way video and audio feeds (1 to many) and as many
as 100, (1 to 1) connections. Although I am more familiar with
xServe, I would prefer to use Linux servers if possible. I have 100
megs of local bandwidth for serving out the content. Am I better to
go with fewer, more robust servers or more servers with less
individual processing power? How much memory per server works best
in your experience? Although Adobe's materials do dot suggest that
load balancing is needed at my size, should I look into load
balancing hardware anyway? All suggestions are most welcome.

To come up with some working numbers, let's assume you'll
have the following application instances running, and all of your
audio/video streams are set at a bitrate of 128kbps:
A) 4 rooms with 1 to many broadcast, each with a single
broadcaster being viewed by 100 people -and-
B) 100 2 way chat rooms, each having two users both
sending/receiving audio and video
For part A, we'll have a total of 404 streams (400 receiving
and 4 broadcasting). At 128kbps, your 404 streams will consume
about 50Mbps of bandwidth.
For part B, we'll have a total of 400 streams (100 rooms each
with two broadcasting streams and two receiving streams), so,
there's another 50Mbps.
So, we have a total of 804 streams consuming 100mbps...
assuming you stick with 128kbps. If your video will be sized at
160x120, you might get away with that bitrate, but if you want a
larger image, you'll likely want to increase the video rate to
265kbps or better.
Given the volume, I'd opt to deploy the app across two, or
maybe even three servers if the budget allows (single processor
Xeon machines with 2gb of RAM should do nicely).
For you OS choice, FMS is rock solid on RHEL 3.

Specific Hardware Configuration for a new ATG Project

Hi All,
We're going to setup a new ATG Project in my organisation with ATG 10.
Can you please suggest me the best Hardware configuration to setup new project?
Thanks & Regards,
Narasimha Rao D.

Hi,
I am not able to figure out which version is jboss-eap-5.1\jbosss.
Can you please let me know which version of JBoss to download mentioned in this link http://www.jboss.org/jbossas/downloads/
for ATG versions mentioned below
1)9.3 which version of jboss to use ???
2)10.0.2 which version of jboss to use ???

WVRS4400N wireless router - What do i need to configure for VPN software to work?

Hi,
My VPN software can't establish connection ever since i changed to the WVRS4400N router. What do i need to configure inorder to establish a VPN connection to the outside network?
On a side note, i am not sure if i am on the right track but i read a little bit about setting IPSec Pass-Through. If this is the case, do i really need to get all the remote connection information inorder for my VPN software to work? And under Key Management setting, what would my pre-shared key use for (assuming this is a key i generated)?
Better yet, how can i get the vpn software to work with only having access to the internet without going through alot of hassle???
Thanks ahead for any solutions given...

Thank you for responding.
If i am not mistaken, i believe what you are suggesting is setting up a VPN connection to my local area network and use the bundled Quick VPN client software to connect.
I currently have Sentinel VPN software on my laptop and it is configured to have access to my work's network. In most cases, i am able to connect to work without a problem as long as i have internet connection. Apparently, my vpn doesn't work when i am running it behind the WVRS4400N router. This problem didn't occur with my previous router. I believe the WVRS4400N router is blocking the connection by default. What can i do or configure to resolve this?

Hardware Configurations for Oracle 10g AS

Hi,
I'm looking for Hardware Configurations on various platforms which Oracle AS 10g supports. Basically i'm looking for details for these on each supported platforms.
No. Of CPUs
CPU Speed
RAM
Disk Space
I would appreciate if someone point me some document on this.
Thanks,
RK

Those parameters are more of a function of intended use (ie the application and which components of AS involved). There are absolute minimum values to enable installation (not use) of the software in each platforms Install Guide.
For certified platforms, check with you sales contact or Oracle Support.

Need more configuration for reports?

Hi All,
When i start the report (Content Management -> Reports -> Approval Maintenance Report), the report is running, but when i go for Running Reports related link there is no reports are currently running. Do i need to have more configuration for this.
I reward your valuable reply.
Thanks and Regards,
Kalaivani

Hi Kalaivani,
You can see this link from http://help.sap.com (The SAP Help Portal provides web-based documentation for all SAP Solutions. This enables you to search the online library for the right information where and when you need it.)
http://help.sap.com/saphelp_nw70/helpdata/en/07/dad131443b314988eeece94506f861/frameset.htm
This link is from KM Administration Guide. If you want other configuration or documentation, ask me
Kind Regards,
Lubi

Need hardware configuration for server

Similar Messages

Maybe you are looking for