Need help about : ORA-14450 error

ORA-14450: attempt to access a transactional temp table already in use
Cause: An attempt was made to access a transactional temporary table that has been already populated by a concurrent transaction of the same session.
what can i do to solve this error
need help immediately

Sounds like you have a transaction-specific global temporary table (ON COMMIT DELETE ROWS) and that mulitple transactions try to use it at the same time.
You could make the table session-specific (ON COMMIT PRESERVE ROWS).
BUT, there may be a reason why it was created this way and you therefore have a problem somewhere in the program logic.

Similar Messages

Need help about Hidden Markov Model model

I want to make classification for EEG signal using Hidden Markov Model
algorithm based on neural network.
plz need help about how to implement this algorithm using LABVIEW.
if not I want another thing to make classification.
any one know information about this topic, send me a reply
thanks

Have you derrived the HMM that you want to implement?
If so, post the algorithm and we can provide comments on how to implement it using LabVIEW.
Message Edited by Ray.R on 04-12-2010 12:54 PM

Need help about ref cursor using like table

Hi Guys...
I am devloping package function And i need help about cursor
One of my function return sys_refcursor. And the return cursor need to be
join another table in database . I don't have to fetch all rows in cursor
All i need to join ref cursor and another table in sql clause
like below
select a.aa , b.cc form ( ref_cursor ) A, table B
where A.dd = B.dd
I appeciate it in advance

My understanding is that you have a function that returns a refcursor and is called by a java app.
Because this is a commonly used bit of code, you also want to reuse this cursor in other bits of sql and so you want to include it like table in a bit of sql and join that refcursor to other tables.
It's not as easy as you might hope but you can probably achieve this with pipelined functions.
Is it a direction that code should be going down? yes, eventually. I like the idea of pulling commonly used bits of code into a SQL statement especially into the WITH section, provided it could be used efficiently by the CBO.
Is it worth the effort given what you have to do currently to implement it? possibly not.
what else could you do? construct the sql statement independently of the thing that used it and reuse that sql statement rather than the refcursor it returns?
Message was edited by:
dombrooks

Need help about boot SUNFIRE V120

Hi all....
I need help about how to change boot from boot net to boot disk....
after i installed sun solaris 10 at my sunfire v120, then reboot the machine ... this sunfire still boot from net not from disk...
can i change it?
please i really need help ....
thanks

If its booted, try "eeprom boot-device=disk"
If your at the OBP, "setenv boot-device disk".
If that doesnt work check the value of "diag-switch?".
It could be booting off the the diag-device instead

Need Help about 3D and revolving in illustrator

I really need help about 3D, Please tell me that How i create 3D in illustrator
i want to revolve text or shape around any object like this, any plugin? or other software required for this?
if somebody know this it will be really help full
   http://rcgrafix.fizwig.com/1452732-large.jpg
   http://rcgrafix.fizwig.com/1384370-large.jpg
   http://rcgrafix.fizwig.com/1062180-large.jpg
Thanks
Arsi

if links are not working try Copy and paste it in to your browser address bar
thank you

Need help about the SHA Message Digest ? & what is use of Message Diagest ?

need help about the SHA Message Digest ? & what is use of Message Diagest ?
1>i have one program of making message digest
2>which requires two files name
3>one for input like txt
4> second is out put file of message digest
can any one tell what is the use of second generated file .

MessageDigest md = MessageDigest.getInstance("SHA");
FileInputStream fis = new FileInputStream(args[0]);
byte[] b = new byte[1024];
int readed = -1;
while((readed = fis.read(b)) > 0)
     md.update(b, 0, readed);
fis.close();
FileOutputStream fos = new FileOutputStream(args[1]);
byte[] d = md.digest();
StringBuffer sb = new StringBuffer();
for(int i = 0; i < d.length; i++) {
     String str = Integer.toHexString(d[i] & 0xff);
     sb.append(str.length() < 2 ? "0" + str : str);
fos.write(sb.toString().getBytes());
fos.close();

Need help about 1015

need help about 1015 it says connect iphone to itunes on screen i did it but it doesnt work and says unexpected 1015

Try restoring it: Make sure you are following the instructions in this procedure to the letter. Here they are, with emphasis on some easily overlooked requirements:
Disconnect the USB cable from the iPhone, but leave the other end of the cable connected to your computer's USB port.
Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release only the Sleep/Wake button.
Continue pressing and holding the Home button while you reconnect the USB cable to the device. The device should turn on.
Note: If you see the "low battery" screen, let the device charge for at least ten minutes to ensure that the battery has some charge, and then start with step 2 again.
Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears (iTunes icon and USB connector) release the Home button.
If necessary, open iTunes. You should see the "recovery mode" alert ("iTunes has detected a phone in recovery mode").
Use iTunes to restore the device.
If you do not see the "Connect to iTunes" screen, try these steps again.
If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
If you have backed up the iPhone in the past, select the device in iTunes and choose "restore from backup".

I need help with this code error "unreachable statement"

the error_
F:\Java\Projects\Tools.java:51: unreachable statement <-----------------------------------------------------------------------------------------------------------------THIS
int index;
^
F:\Java\Projects\Tools.java:71: missing return statement
}//end delete method
^
F:\Java\Projects\Tools.java:86: missing return statement
}//end getrecod
^
3 errors
import java.util.*;
import javax.swing.*;
import java.awt.*;
public class Tools//tool class
private int numberOfToolItems;
private ToolItems[] toolArray = new ToolItems[10];
public Tools()//array of tool
numberOfToolItems = 0;
for(int i = 0; i < toolArray.length; i++)//for loop to create the array tools
toolArray[i] = new ToolItems();
}//end for loop
}//end of array of tools
public int search(int id)//search mehtod
int index = 0;
while (index < numberOfToolItems)//while and if loop search
if(toolArray[index].getID() == id)
return index;
else
index ++;
}//en while and if loop
return -1;
}//end search method
public int insert(int id, int numberInStock, int quality, double basePrice, String nm)//insert method
if(numberOfToolItems >= toolArray.length)
return 0;
int index;
index = search(id); <-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------HERE
if (index == -1)
toolArray[index].assign(id,numberInStock, quality, basePrice,nm);
numberInStock ++;
return 1;
}//end if index
}//end if toolitem array
return -1;
}//end insert method
public int delete(/*int id*/)//delete method
}//end delete method
public void display()//display method
for(int i = 0; i < numberOfToolItems; i++)
//toolArray.display(g,y,x);
}//end display method
public String getRecord(int i)//get record method
// return toolArray[i].getName()+ "ID: "+toolArray[i].getID()
}//end getrecod
}//end class
Edited by: ladsoftware on Oct 9, 2009 6:08 AM
Edited by: ladsoftware on Oct 9, 2009 6:09 AM
Edited by: ladsoftware on Oct 9, 2009 6:10 AM
Edited by: ladsoftware on Oct 9, 2009 6:11 AM

ladsoftware wrote:
Subject: Re: I need help with this code error "unreachable statement"
F:\Java\Projects\Tools.java:51: unreachable statement <-----------------------------------------------------------------------------------------------------------------THIS
int index;
^
F:\Java\Projects\Tools.java:71: missing return statement
}//end delete method
^
F:\Java\Projects\Tools.java:86: missing return statement
}//end getrecod
^
3 errorsThe compiler is telling you exactly what the problems are:
public int insert(int id, int numberInStock, int quality, double basePrice, String nm)//insert method
if(numberOfToolItems >= toolArray.length)
return 0; // <<== HERE you return, so everyting in the if block after this is unreachable
int index;
index = search(id); //< -----------------------------------------------------------------------------------------------------------------HERE
if (index == -1)
toolArray[index].assign(id,numberInStock, quality, basePrice,nm);
numberInStock ++;
return 1;
}//end if index
}//end if toolitem array
return -1;
}//end insert method
public int delete(/*int id*/)//delete method
// <<== HERE where is the return statement?
}//end delete method
public String getRecord(int i)//get record method
// return toolArray.getName()+ "ID: "+toolArray[i].getID() <<== HERE you commented out the return statement
}//end getrecod
}//end class

I have an error -5000 when I try to record in GarageBand..I urgen need help, I have an error -5000 when I try to record in GarageBand..I urgen need help

I have an error -5000 when I try to record in GarageBand V10,02..I urgen need help, I have an error -5000 when I try to record in GarageBand..
I just reinstal OSX 10,9,2 marveiks and downdload the GB.. but when I try to record, the error ocurr
I urgen need help
thanks

This is probably one of the files that is required by the template you are using.
These files are inside the iWeb app. Control click the iWeb app icon and select "Show package contents".
You need to dig down through the folders and files to find what you want...
Contents/Resources/da.lproj/Templates/
If the file is missing you would need to re install the iWeb app...
http://www.iwebformusicians.com/iWeb/iWeb-Tips.html

Hi, Need help about ios7 upgrade, after this upgrade I cannot watch youtube or any video with my Ipad,

Hi, Need help about ios7 upgrade, after this upgrade I cannot watch youtube or any video with Ipad, and Iphone as well
I think my wireless rooter's setting has some problem but cannot found anything to solve,
I can watch if there is another wireless network , I tried this option in another place who has wireless network and I can watch.
Do you have any idea to do these setting , I dont have any problem when Ipad has 6.1.3 IOS,
need help
thanks

Thanks
I will and share the result.

Need help in understanding the error ORA-01843: not a valid month - ECX_ACT

Hello All,
We need help in understanding the Transaction Monitor -> Processing Message (error "ORA-01843: not a valid month - ECX_ACTIONS.GET_CONVERTED_DATE").
And how to enable the log for Transaction Monitor -> Processing Logfile.
Actually we are trying to import the Purchase Order XML (OAG) into eBusiness Suite via BPEL Process Manager using the Oracle Applications Adapter. The process is working fine with expected payload until it reaches the XML Gateway Transaction Monitor, where we are getting this error.
thanks
muthu.

Hello All,
We need help in understanding the Transaction Monitor -> Processing Message (error "ORA-01843: not a valid month - ECX_ACTIONS.GET_CONVERTED_DATE").
And how to enable the log for Transaction Monitor -> Processing Logfile.
Actually we are trying to import the Purchase Order XML (OAG) into eBusiness Suite via BPEL Process Manager using the Oracle Applications Adapter. The process is working fine with expected payload until it reaches the XML Gateway Transaction Monitor, where we are getting this error.
thanks
muthu.

Need help, I have an error message "not enough storage" for icloud and it will not let me do anything

Need help... getting an error message "not enough storage" for icloud and it will not let me get passed the message

See if this helps.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

Need help about using sqlplus_exec_template.sql

I tried to use sqlplus_exec_template.sql to execute our deployed mapping. At dos prompt I typed :
C:\>sqlplus username/[email protected] @C:\OWB\owb\rtp\sql\sqlplus_exec_template.sql
rtschema localhost SQL_LOADER CRD_APPL_MAPPING SKIP=0,LOAD=0,LOG_FILE
NAME=cvcpmapl.log,DIRECT=true,PARALLEL=false,ERRORS=50,ROWS=200,READSIZE=65536,BINDSIZ E=50000,AUDIT=true,PURGEGROUP=wb,target_store_uoid=F0E49963A42E4DB6AFF
85FFF8E05AB9E
SQL*Plus: Release 9.2.0.1.0 - Production on Fri May 16 18:32:25 2003
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected to:
Oracle9i Enterprise Edition Release 9.2.0.1.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.1.0 - Production
Session altered.
Role set.
Stage 1: Decoding Parameters
| location_name=localhost:1521:odb
| task_type=SQL_LOADER
| task_name=CRD_APPL_MAPPING
Stage 2: Opening Task
declare
ERROR at line 1:
ORA-20001: Task not found - Please check the Task Type, Name and Location are
correct.
ORA-06512: at line 261
Disconnected from Oracle9i Enterprise Edition Release 9.2.0.1.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.1.0 - Production
=================================================
I am quite sure the task name and task type is correct. The task name is same as the one I saw in runtime repository schema -> table WB_RT_TASKS -> column TASK_NAME
, but I am very doubt about what should be the correct input for LOCATION, system parameter and custom parameter.
Can anyone give some help about where could I find the correct input for those parameter?
Thx in advance.
Rds
CH

I 've tried to use :
sqlplus username/[email protected] @C:\OWB\owb\rtp\sql\sqlplus_exec_template.sql
rtschema OWBLOCATION SQL_LOADER CRD_APPL_MAPPING "," ","
where OWBLOCATION I have used the deploy location of the mapping for my case, created within OWB. The value is CCS_DEPLOY.
But the error is the same :
======================================================
Stage 1: Decoding Parameters
| location_name=CCS_DEPLOY
| task_type=SQL_LOADER
| task_name=CRD_APPL_MAPPING
Stage 2: Opening Task
declare
ERROR at line 1:
ORA-20001: Task not found - Please check the Task Type, Name and Location are
correct.
ORA-06512: at line 261
========================================================
could you tell me the SQL used by WB_RT_API to get the task from runtime schema. So that I could check the correct location myself.
Or how could I view the pl/sql of WB_RT_API_EXEC which is wrapped.
Thx for your help.
Rg.
CH

Need help about an unrecognized installer

Hello,
I need some help about installing a software. I bought a softsynth called Ultra Focus. Inside the discs, there is a folder for a Mac Installer. And the file called Ultra Focus Installer is not being recognized by Tiger. And, this file does not have an extension. Just a white file called Ultra Focus Installer. I don't know what to do to install the software. Is this a common issue?
Thanks!

And, I don't know what is CMD+i. Can you describe what it is?
Sorry, CMD+i means the Apple/Command/Clover Leaf key, (depending on KB), plus the i key, it's the same as, and a Shortcut to Finder>File>Get info.
I suggest this at the moment...
"Try Disk Utility
1. Insert the Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
5. Select your Mac OS X volume.
6. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot.
The usual reason why updates fail or mess things up, is if Permissions are not fixed before & after every update, with a reboot... you may get a partial update when the installer finds it doesn't have Permissions to change one obscure little part of the OS, leaving you with a mix of OS versions.
Some people get away without Repairing Permissions for years, some for only days.
If Permissions are wrong before applying an update, you could get mixed OS versions, if Directory is the slightest messed up, who knows!
If many Permission are repaired, or any Directory errors are found, you may need to re-apply some the latest/biggest updates.

Need Help on Ora-00600

Hello, how are you all. I hope you all will be fine.
I am recieving ora-00600 error in alert file. I do not know what the error is and how can i resolve it. Please tell me how can i resole it.
Thanks a Lot

Hello,
ORA-00600 is a generic error, which are mostly undocumented. To find out more about the error you would need to either get in touch with Oracle Support, or use ORA-600 lookup tool on metalink, or find out if there is some information available on OTN discussion forums
Search OTN using the parameters that comes along with ORA-600. You might find some information. If you can post the parameters and the error stack on this thread, someone would assist you
Regards
Sudhanshu

Need help about : ORA-14450 error

Similar Messages

Maybe you are looking for