Need help about transfering from my dvr to mac

Hi can anyone help me. I was wondering if it is possible to transfer tv shows to my mac with a firewire connection so I can burn to dvd and how do you do so and what programs do I have to use. Thanx in advance.

Hi blackalien,
Welcome to the forum.
The EyeTV solutions from Elgato Systems will be of interest:
http://www.elgato.com/

Similar Messages

Need help with transferring from ipod mini to nano!

I own an iPod mini and just went and bought an iPod nano and am wondering how to transfer the music from my mini onto my nano. This may seem like a dumb question but I'm not finding a way in iTunes to do it. Thanks for help in advance

IPods are designed to transfer music in a one way fashion. Meaning, iPods can only have music transferred to them via iTunes, not vice versa. So, in your case, where the iPod mini has your music on its memory, you will be unable to transfer the actual music back to the computer. Hopefully, you have the music from the iPod mini stored on your computer or on some flash drive to be able to import the same music to the iPod nano. I am assuming that this is the case, your music being on iTunes, else other implications would have occurred in updating the iPod mini. Put simply, you need to have your music solely on iTunes and transfer from there to the iPod nano. Hopefully this helps.

Need Help Recording Programs from my DVR to my VCR

Can someone please tell to reocrd a program from DVR to my VCR without getting all snow
Here is my set up
TV- Sony
VCR/DVD- Sony SLV-D300P
DVR- QIP7200

How many threads do you need for the same question? This was asked HERE and answered, but you seem incapable of taking the instructions given successfully.
Yellow from DVR Video Out to VCR Video In
White from DVR Audio Left Out to VCR Audio Left In
Red from DVR Audio Out Right to VCR Audio Right In
The inset color of the RCA jacks (color inside the silver ring) matches the cables.
Set VCR to LINE INPUT, play the DVR recording and record on the VCR. If that is too difficult then get Geek Squad or someone who understands how to connect components. The connections are also shown in the DVR manual.
I have been using this exact set of connections for 2 years and it works fine.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.

Okay, need help with transferring from computer to computer...

I borrowed 5 movies from a friend so I could put them in the format for him to put on his iPod, since he couldn't figure it out, and he uses a Mac and I use Windows, I couldn't really help him out.
So I have them all coded right for him, but the problem is, I have 5 movies, and one or two of them are bigger than my 700mb CD's can hold!
Is there a way that I can put them on my iPod, bring my iPod to his computer, plug it in, and take them off my iPod and put them on his iTunes? Or is this just a dream I wish would come true?
~Kourtney~

Hmmm, well I know the below stuff works for songs, but could very well work on videos as well. Unfortunately I am not sure. But here are the links for your reading pleasure...
Copying from iPod to Computer threads...
http://discussions.apple.com/thread.jspa?threadID=776996&tstart=0
http://discussions.apple.com/thread.jspa?threadID=805256&tstart=0
http://discussions.apple.com/thread.jspa?messageID=797432&#797432
Also these useful internet articles...
http://www.engadget.com/2004/11/02/how-to-get-music-off-your-ipod/
http://playlistmag.com/help/2005/01/2waystreet/
iPod: Frequently Asked Questions
http://docs.info.apple.com/article.html?artnum=60920
Patrick

Need help in transfering data to my new iphone4 from my old iphone3

Hello, just received my new iphone 4, need help in transfering data from my old iphone 3 photos, emails etc. apps, thank you

http://support.apple.com/kb/ht2109

I have an excel spreadsheet that needs to be transferred from a PC computer to my imac. I downloaded the numbers program, but when I transferred the spreadsheet using numbers, it didn't appear the same. Do I need to buy the mac office software?

I have an excel spreadsheet that needs to be transferred from a PC to my imac. I downloaded the numbers app, but the spreadsheet isn't appearing like the original in the numbers program. Drop boxes aren't working the same and things are moved around. Will I need to now purchase the mac office software or will I still have the same problem?

More compatible are OpenOffice or NeoOffice. Also if you are using a PowerPC Mac you may not be able to use the most recent Office anyway. Make sure the version of Office you get is compatible with your Mac. PPC indicates PowerPC, which was only found on Macs early 2006 and older. Go to Apple menu -> About This Mac to determine which CPU is on your Mac. If it says G3, G4, or G5 it is PowerPC. If it says Intel Core you can upgrade to Snow Leopard minimum and possibly the latest Office, if it says Intel Core2Duo (with the 2 in the middle) or Core i with some number you may be able to upgrade to Lion, but certainly no trouble wiht the latest Office.

Need help about boot SUNFIRE V120

Hi all....
I need help about how to change boot from boot net to boot disk....
after i installed sun solaris 10 at my sunfire v120, then reboot the machine ... this sunfire still boot from net not from disk...
can i change it?
please i really need help ....
thanks

If its booted, try "eeprom boot-device=disk"
If your at the OBP, "setenv boot-device disk".
If that doesnt work check the value of "diag-switch?".
It could be booting off the the diag-device instead

Need help about 1015

need help about 1015 it says connect iphone to itunes on screen i did it but it doesnt work and says unexpected 1015

Try restoring it: Make sure you are following the instructions in this procedure to the letter. Here they are, with emphasis on some easily overlooked requirements:
Disconnect the USB cable from the iPhone, but leave the other end of the cable connected to your computer's USB port.
Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release only the Sleep/Wake button.
Continue pressing and holding the Home button while you reconnect the USB cable to the device. The device should turn on.
Note: If you see the "low battery" screen, let the device charge for at least ten minutes to ensure that the battery has some charge, and then start with step 2 again.
Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears (iTunes icon and USB connector) release the Home button.
If necessary, open iTunes. You should see the "recovery mode" alert ("iTunes has detected a phone in recovery mode").
Use iTunes to restore the device.
If you do not see the "Connect to iTunes" screen, try these steps again.
If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
If you have backed up the iPhone in the past, select the device in iTunes and choose "restore from backup".

Need help about Hidden Markov Model model

I want to make classification for EEG signal using Hidden Markov Model
algorithm based on neural network.
plz need help about how to implement this algorithm using LABVIEW.
if not I want another thing to make classification.
any one know information about this topic, send me a reply
thanks

Have you derrived the HMM that you want to implement?
If so, post the algorithm and we can provide comments on how to implement it using LabVIEW.
Message Edited by Ray.R on 04-12-2010 12:54 PM

TS1389 I need help removing UAC from itunes..

I need help removing UAC from itunes so it will not allow me to open itunes. Everything I have read from other comments that you shouldn't turn off your user account control. I just to be able to open itunes. Can anyone help me with this problem?? Greg, ogrady612@yahoo,com

I had this problem too but you do not need UAC to be turned on.
Click on start and search for 'uac' in the search box at the bottom and click on 'Change User Account Control Settings' when it comes up. Move the slider to the bottom when the window appears and save the changes and your done!
It's worked for me and my uac has been off for months without causing me any problems!
Hope this helped

Need help about ref cursor using like table

Hi Guys...
I am devloping package function And i need help about cursor
One of my function return sys_refcursor. And the return cursor need to be
join another table in database . I don't have to fetch all rows in cursor
All i need to join ref cursor and another table in sql clause
like below
select a.aa , b.cc form ( ref_cursor ) A, table B
where A.dd = B.dd
I appeciate it in advance

My understanding is that you have a function that returns a refcursor and is called by a java app.
Because this is a commonly used bit of code, you also want to reuse this cursor in other bits of sql and so you want to include it like table in a bit of sql and join that refcursor to other tables.
It's not as easy as you might hope but you can probably achieve this with pipelined functions.
Is it a direction that code should be going down? yes, eventually. I like the idea of pulling commonly used bits of code into a SQL statement especially into the WITH section, provided it could be used efficiently by the CBO.
Is it worth the effort given what you have to do currently to implement it? possibly not.
what else could you do? construct the sql statement independently of the thing that used it and reuse that sql statement rather than the refcursor it returns?
Message was edited by:
dombrooks

Need Help about 3D and revolving in illustrator

I really need help about 3D, Please tell me that How i create 3D in illustrator
i want to revolve text or shape around any object like this, any plugin? or other software required for this?
if somebody know this it will be really help full
   http://rcgrafix.fizwig.com/1452732-large.jpg
   http://rcgrafix.fizwig.com/1384370-large.jpg
   http://rcgrafix.fizwig.com/1062180-large.jpg
Thanks
Arsi

if links are not working try Copy and paste it in to your browser address bar
thank you

Need help about the SHA Message Digest ? & what is use of Message Diagest ?

need help about the SHA Message Digest ? & what is use of Message Diagest ?
1>i have one program of making message digest
2>which requires two files name
3>one for input like txt
4> second is out put file of message digest
can any one tell what is the use of second generated file .

MessageDigest md = MessageDigest.getInstance("SHA");
FileInputStream fis = new FileInputStream(args[0]);
byte[] b = new byte[1024];
int readed = -1;
while((readed = fis.read(b)) > 0)
     md.update(b, 0, readed);
fis.close();
FileOutputStream fos = new FileOutputStream(args[1]);
byte[] d = md.digest();
StringBuffer sb = new StringBuffer();
for(int i = 0; i < d.length; i++) {
     String str = Integer.toHexString(d[i] & 0xff);
     sb.append(str.length() < 2 ? "0" + str : str);
fos.write(sb.toString().getBytes());
fos.close();

Need help coping project from one computer to another.

I need help coping project from one computer to another. I loaded all video on computer 1, copied events and project folder to computer 2. I was told I only needed to copy the project folder back to computer 1 since the events folder is already there. I copied project folder back to computer 1 but the files wont open. I dont have computer 2 available.
Please help!!!

Hi
No that's not the way to do it - iMovie gets confused and in some cases the problems might be un-repairable.
You've got several problems
• iMovie'08 - CAN NOT MOVE PROJCTS - You NEED iMovie'09 or iMovie'11 - I see no other working solution
• Never MOVE or alter any folder named
iMovie Projects - or -
iMovie Events
on DeskTop/Finder - This might be very harmful
• Moving (Projects) and Events - HAS TO be done within the iMovie Application.
You've got an Evets window and here You can view Your Events in two ways - Yearly - or - Yearly per Hard disk
Here You can move within this "window" to another location
• Projects - NO they do not contain Your full movie - only a document on howto use the material in Event folder
and there might be worse if You added Photos from iPhoto and Audio from iTunes/Garageband - then You have
to get this over to the second Mac too, to be able to continue editing.
So to move Your projects to another Mac You need
• iMovie'09 or 11
• an external hard disk -
MUST BE Mac OS Extended formatted - as UNIX/DOS/FAT32/Mac OS Exchange will not work for VIDEO
Should be a FireWire one - as UBS/UBS2 performs badly when used for video
• Then move/copy over within Project resp Events window in iMovie Application
Hopefully I've been not to confusing or badly structured to be followed.
Yours Bengt W

Hi, Need help about ios7 upgrade, after this upgrade I cannot watch youtube or any video with my Ipad,

Hi, Need help about ios7 upgrade, after this upgrade I cannot watch youtube or any video with Ipad, and Iphone as well
I think my wireless rooter's setting has some problem but cannot found anything to solve,
I can watch if there is another wireless network , I tried this option in another place who has wireless network and I can watch.
Do you have any idea to do these setting , I dont have any problem when Ipad has 6.1.3 IOS,
need help
thanks

Thanks
I will and share the result.

Need help about transfering from my dvr to mac

Similar Messages

Maybe you are looking for