Need Help Accessing OS X Server Remotely

I just did clean install on Mavericks on my mac mini 2012
and installed OS X Sever 3 app
I have host name from dyndns when I enter my host name from remote IP or phone
I get router login page, I want to access web app running on server
Here are current settings
Dydns Host is mini$%#@.selfip.net
Settings from Server App
Computer Host Name: mini$%#@.selfip.net
Computer Name: Mini$%#@
DNS
Access
Status: Set your network DNS settings to 192.168.254.70
Settings
Forwarding Severs 4
XX.40.XX.40 —> Primary DNS
XX.40.XX.41 —> Secondary DNS [got it from router]
192.168.254.254 —> Router IP address
192.168.254.70 —> Mac Mini Local address
Perform Lookups for : only some clients
The server itself
Clients on the local network
Records
Primary Zone: mini$%#@.selfip.net
mini$%#@.selfip.net = machine
mini$%#@.selfip.net = nameserver
Reverse Zone: 70.254.168.192.im-addr.arpa
192.168.254.70 = reverse mapping
mini$%#@.selfip.net = name server
every time I type mini$%#@.selfip.net from any device it jumps directly to port 80 and goes to router login page
and if specify port say "mini$%#@.selfip.net:3421" it doesn’t connect.
I have opened port range in router from 3000 to 4000
same ports were open in 10.8 and I could access web apps remotly but now no matter what port I change my web apps
it doesn’t connect.
can someone help?

You can't do that. "SuperDuper" doesn't work over a network. "Carbon Copy Cloner" does.

Similar Messages

I need to access my work server, email ect windows based whats best using my imac

i need help accessing my email and company server from my imac the company uses a windows based exchange server thanks

Are you trying to set your email up on the iMac using mail? If so, you will some information from you IT department. Or you can try to setup and exchange server in mail and type your email account and password. http://support.apple.com/kb/HT3748 if it's a POP account you will need to get the setup info from IT. You can use Remote Desktop Connection to connect to your server.

I need help authenticating my outgoing server settings in setting up my work email on my Galaxy S5. It says unable to authenticate or connect to server and I even called helpdesk at my email support and they tried every possible port (80, 25, 3535 or 465

I need help authenticating my outgoing server settings in setting up my work email on my Galaxy S5. It says unable to authenticate or connect to server and I even called helpdesk at my email support and they tried every possible port (80, 25, 3535 or 465 SSL) and none of them work. Please help!

You will need to get the required info to create/access the account with an email client from your school.
Are you currently accessing the account with an email client on your computer - if you have a Mac with the Mail.app, or if you have a PC with Outlook Express, etc.? If so, you can get the required account settings there.

Need help accessing the router web page. I have been tol...

Need help accessing the router web page. I have been told my router is acting like a switch and the IP address is not in the proper range. I have tried reseting the router (hold for 30 sec and unplug for 5 mins). Didn't work.
thanks

What router are you using? Almost all Linksys routers use 192.168.1.1 as the default local IP address, but there is at least one that uses 192.168.16.1 , namely the WTR54GS (not the WRT54GS).
You need to try again to reset the router to factory defaults.
To reset your router to factory defaults, use the following procedure:
1) Power down all computers, the router, and the modem, and unplug them from the wall.
2) Disconnect all wires from the router.
3) Power up the router and allow it to fully boot (1-2 minutes).
4) Press and hold the reset button for 30 seconds, then release it, then let the router reset and reboot (2-3 minutes).
5) Power down the router.
6) Connect one computer by wire to port 1 on the router (NOT to the internet port).
7) Power up the router and allow it to fully boot (1-2 minutes).
8) Power up the computer (if the computer has a wireless card, make sure it is off).
9) Try to ping the router. To do this, click the "Start" button > All Programs > Accessories > Command Prompt. A black DOS box will appear. Enter the following: "ping 192.168.1.1" (no quotes), and hit the Enter key. You will see 3 or 4 lines that start either with "Reply from ... " or "Request timed out." If you see "Reply from ...", your computer has found your router.
10) Open your browser and point it to 192.168.1.1. This will take you to your router's login page. Leave the user name blank (note: a few Linksys routers have a default user name of "admin" (with no quotes)), and in the password field, enter "admin" (with no quotes). This will take you to your router setup page. Note the version number of your firmware (usually listed near upper right corner of screen). Exit your browser.
If you get this far without problems, try the setup disk (or setup the router manually, if you prefer), and see if you can get your router setup and working.
If you cannot get "Reply from ..." in step 9 above, your router is dead.
If you get a reply in step 9, but cannot complete step 10, then either your router is dead or the firmware is corrupt. In this case, use the Linksys tftp.exe program to try to reload your router with the latest firmware. After reloading the firmware, repeat the above procedure starting with step 1.
If you need additional help, please state your ISP, the make and model of your modem, your router's firmware version, and the results of steps 9 and 10. Also, if you get any error messages, copy them exactly and report back.
Please let me know how things turn out for you.
Message Edited by toomanydonuts on 01-21-2008 04:40 AM

Need help in creating virtual server

Hi
I have configured the sun ONE portal server to run on a domain p1.test.com. A default virtual server with the listen socket is existing for this virtual server. But now I need to access the portal with another domain name p1.test.co.in. I have tried creating another virtual server but it is not working. Please help me in creating the virtual server. For the "urlhost", whether I have to specify the original machine name or new domain name. Please help me in this issue.
Regards
ram

Hi,
Thanks for your reply. Actually I need the same content for both the url's. The DNS entries are already for the two urls's. It is getting the login page. But after giving the credentials it dosent brings the portal desktop page (seems to be going in a loop).
I have my Sun ONE LDAP server configured with the domain "test.com". Is there any changes that I have to make in the LDAP. Please help me in this issue.
Thank You.
Best Regards
ram

Need help setting up Mac server for dental practice?

My dentist is running windows server 2003 and wants to do a total upgrade to Apple server components. The issue is that the software his office uses for patient records is not Mac compatible. He is really set on the Mac environment and is curious if he can run the software on a Mac running Windows and I guess my question is the same. I don't have the specifics on the software he needs to run but from what he says it is fairly low overhead and handles some large jpeg files but mostly small data files.
I am curios how difficult the task of migrating all the info into the Mac environment will be? He is also curious about remote access from home or wherever he needs to get to his info and am curious if a VPN or other method is best.
Thanks

Ok, I am a sucker. I will bite.
The answer is yes. OS X and OS X Server can run Windows in a virtual machine using Parallels of VMWare (or virtual box, or Crossover, or... you get my point). This will allow you to run Mac hardware with Mac software but at the same time run Windows and the required applications.
But, there is a cost penalty here. First, there is the cost of the hardware. Not a big deal, Apple is competitive in price and the server hardware is very nice. Then there is the cost of Windows and the VM software. This is your tax. You have to add these costs on top of what you are already buying and then there is the hidden cost of the additional support. You are now supporting two operating systems, OS X and Windows. And just because Window is running on a Mac does not make it immune to viruses/spyware/trojans/etc.
If this guy really wants to go the Mac route, then go all Mac. Check out http://www.macpractice.com/mp/dds/ or http://www.macdentpro.com/index.php or do a search. There are a number of products that can handle dental practices on Macs, including the radiology aspect. Google is your friend.
As for remote access, OS X Server has a VPN built in that works well. That is not a problem. Or you can get a dedicated VPN appliance to handle security. Once bit of advice. Make sure you implement a good backup solution. Don't be foolish and think that TIme Machine alone is going to save you. This is medical records. Do not mess with them. Spend the dollars to properly harden the environment and ensure record retention policies are met.
Hope this helps

New To Oracle.. Needs Help:: Conversion from SQL Server to Oracle 11g

I am new to Oracle 11g and badly need the conversion of SQL Server Functions to Oracle.. Sample Pasted Code not working .. end with error.. pls help
Create Table TempT (ID1 Varchar (10),
ID2 Varchar (10)
CREATE OR REPLACE PACKAGE GLOBALPKG
AS
TYPE RCT1 IS REF CURSOR;
TRANCOUNT INTEGER := 0;
IDENTITY INTEGER;
END;
CREATE OR REPLACE FUNCTION fTempT
i IN VARCHAR2 DEFAULT NULL
RETURN GLOBALPKG.RCT1
IS
REFCURSOR GLOBALPKG.RCT1;
BEGIN
OPEN REFCURSOR FOR
SELECT TT.*
FROM TempT TT
WHERE (fTempT.i = ''
OR TT.ID1 = fTempT.i)
RETURN REFCURSOR;
END;
CREATE OR REPLACE FUNCTION fTempTF
i IN VARCHAR2 DEFAULT NULL
RETURN GLOBALPKG.RCT1
IS
REFCURSOR GLOBALPKG.RCT1;
BEGIN
OPEN REFCURSOR FOR
SELECT *
FROM TABLE(fTempT(i))
RETURN REFCURSOR;
END;
LAST FUNCTION ENDs WITH ERROR
Error(13,7): PL/SQL: ORA-22905: cannot access rows from a non-nested table item

2. The major purpose is to get a simplest way to create a parameterized function who can return a table like output. 2nd function has no use instead i was testing the result of First Function like thisIf you just want to select from a select, you should use a view not a function.
1. which program is more help ful for writing and executing queries bcoz after using Query Analyzer of Microsoft It seems difficult to work on SQL Developer.
sqlplus? If you are having difficulty learning new tools because of an old one you used, probably best to forget the old one and concentrate on learning the new one because it will be different. This goes for the database itself also.
2. Can DMLs be used within a Function.Yes, you just can't execute the function in another SQL statement if it modifies data and this is a good thing.
3. Can temporary tables be used within a function.Unfortunately yes, but they shouldn't be unless you are in a slowest application competition.
5. Each Function which is a Table Function must be accompanied with Type Definitions?? its a bit longer way of doing the things than SQL ServerThat is why it is better to use views instead, is there any reason you want a select that you can select from inside a function?
SQL Server for last 9 years thats why i refer this toolThat is not in itself a problem, if you try and do what you did in SQLServer in Oracle, that will be a problem though.

Need help setting up web server with WRT54GS

Hello,
I am trying to set up a web server with my linksys router. For the network settings, I have used 192.168.001.150 as my primary IP (192.168.1.150, all 3 numerical characters have to be filled in), 255.255.255.000 as my primary netmask and 192.168.001.001 (192.168.1.1) as my gateway. I have gone into my router and then enabled port fowarding for port 80 to 192.168.1.150 but I still cannot access my web server. What could be the problem?
Any help would be greatly appreciated. I'm trying to set up this server so I can test scripts and things.

bump

Need help setting up LDAP server for Address Book

I've set up Panther servers before for AFP which is pretty simple but now the office I work at wants me to setup an LDAP server so they can share the same contact information, probably about 2,000+ entries. I'm guessing that this will have to be entered in the LDAP server entry by entry.
I need to know how to setup the server and what settings need to be on the clients' computers, such as in Address Book.
The server is an older G4 tower and I've got 8 computers hooked up to it on a simple network. I don't think I'll need to make the LDAP server accessible from outside the network but it's something I'll have to worry about for the future.
Thanks for any help you can offer.

bump

Need Help on Oracle BI Server Service

Hi there,
I would need help on to start Oracle BI Server service start.
I have installed OBIEE 10.1.3.4 version and I've been working on creating repository and creating Answers & Dashboards etc..,
Today, I was working on to point other repository in NQSConfig.INI file and when I tried to Start Oracle BI Server Service I get below error:
" *Could not start the Oracle BI Server service on Local Computer*
*Error 1064 An exception occurred in the service when handling the control request*"
It's been working, just I got this error today only, all other services are working fine.
Has anyone got this error?
Any help would be greatly appreciated.
Thank you
Skat
Edited by: Skat on Nov 10, 2009 8:07 PM

Hi All,
Thank you so much for all your quick replies and it worked now.
You are right, I changed repo name and changed back to original one and and Service is starting now.
I think something missing space or format issue when I add other entry in the NQSconfig.INI file, Ihave to follow same synatx.
Now I am good to go.
Thanks again,
skat

Need help with passcode using the "Remote" app

Hello and thanks in advance. I can't find a place on iTunes to enter the passcode from the Remote app.

PLEASE READ!!!
I have a HP Pavilion - Windows XP
I need help as well with the passcode. I went to Networking and Sharing center and clicked customize and changed the name to NetGear because that is what it says next to my WiFi on my iPhone but with my iPhone under Settings it says WiFi NETGEAR > but when I click on it, it says choose a Network. Is NETGEAR a network? How do I find or change to a Network? is this the problem?

Need help understanding MS SQL Server 2008R2 and Report Builder 3.0 and user access / priviledges.

Having Problems with connections and access. I have spent the last 2 days reading various threads regarding SQL Reporting Services pertaining to access and connections.
First, let me explain what I have done to date.
1) I am using Windows 7 - Home Premium.
2) I downloaded and installed MS SQL Server 2008 R2 Express. This was successful.
3) I downloaded Report Server 3.0 - This was successful.
4) In IE, I tried logging onto http://servername/reports, but this failed. After logging into IE
via ' Run Administrator', I was able to access URL.
Next, I updated the security / trust sites as explained in the
threads
Next, I went to Folder Setting and added my user name and granted all roles (Browser,
Content Manager, My
Reports, Publisher and Report Builder).
5) Now, I can log into Http://servername/reports using my normal windows 7 user account.
6) Next, I opened Report Builder 3.0. However, I am having trouble connecting to report
server. I tried connecting with
http://servername/reports, but this failed.
However, If I change URL to http://servername/reportserver, it works. BUT NOW, I have
another problem. When I
execute the RUN button to create report, I get a permission
error. "PERMISSION GRANTED TO USER ARE
INSUFFICIENT FOR PERFORMING THIS OPERATION".
7) Finally, I can not save reports to http://servername/reportserver when I select "Recent
Site and Servers". ERROR
MESSAGE: UNABLE TO OPEN OR SAVE REPORT
8) In my Reporting Services Configuration Manager:
Web URL = http://servername:80/ReportServer
Report Manager URL = http://servername:80/reports.
What is strange, the Report Manager URL works for IE URL and WEB URL works for
Report Builder connect (Even though it really does not work).
THREE QUESTIONS:
1) What URL should I use to connect in Report Builder.
2) How do I update my normal Windows 7 user so I can run reports when I connect to report
builder.
3) How can I save my reports so they are displayed in IE Reporting services. Note: I was
able to save report to
documents folder and import into IE Reporting Services.
4) And finally, is it possible to add report builder 3.0 as a tab in my IE Reporting Services. I
save seen samples of Reporting Services screens where the instructor has Report Builder
tab.
Thanks
Dan

To answer question 1... it should connect through /ReportServer
http://bretstateham.com/reporting-services-architecture-diagram%E2%80%A6/
Report Builder 3.0 is not a web application, it is a client side application can be used using the click-once or downloaded from Microsoft's website. If you are having issues, you might download and install it and try running it as an administrator.

Need help to develop app to remotely add tags to iTunes music from iPhone

Hi
I have recently developed a simple app that sits on my desktop and allows me to add specific tags/text to the 'comment' field of the currently playing track in my iTunes library, the text added depending on the item clicked in some drop-down menus.
This is fine for when I am sitting at my Mac, but most of the time I would like to be able to add tags from a distance, i.e. remotely, using the iPhone, so I started to develop my first iPhone app for this purpose.
I have succesfully designed a simple Tab Bar Application, with two views, which have all the buttons I need, but now I am stumped as to how to set up the remote part of the app. On the Desktop version I simply wrote some applescript with sections for each of the menu items. On the iPhone I am not sure how I would go about this.
Any help with this, either with the procedure I need to follow, or pointing me in the right direction of a tutorial or some such thing, would be gratefully received.
thanks
nick.

Do you mean write access to the iTunes library, rather than iPod library?
If so, if I can accomplish my task with getting the iPhone app to interact with the Desktop app that would be fine. However, I have no idea of how to go about this. Can you give me any pointers?
The desktop app basically consists of a few drop down menus with items that are linked to sections in the project's applescript, which tell iTunes to add specific text to the comments field.
Thanks
Nick

Need Help Setting Up Testing Server

Hi. I have been using Dreamweaver for a while, but am
extremely new at the whole testing server thing, as I have been
building only simple pure-html pages.
I am want to password protect a part of my site using the
Insert > Data Objects > User Authentication > Log In User.
I have already converted my whole site from .html pages to
.php pages, because I thought that .html pages wouldn't work.
Everytime I try to use that Log In User menu command,
Dreamweaver gives me a dialog box that says, "Before inserting this
object, please do the following: 1. Create a site for this file 2.
Choose a document type 3. Set up the site's testing server".
Numbers 1 and 2 have a checkbox which I am assuming means they are
done correctly. But number 3 (set up teh site's testing server) has
no checkbox and the dialog box will not allow me to click OK, which
leads me to assume that I need to accomplish the aforementioned
step number 3.
So I go to the Site Definition for my site and under the
Advanced Tab go to Testing Server. I want PHP MySQL as the server
model, so I chose that. And I am guessing I need to choose
Local/Network for the Access option because
the computer I am building this site on is not connected to the
internet. (I have no intention of hooking this machine up to
the internet becauase all of my work I have ever done is on it!)
Now, here lies my main question: What should the Testing
server folder be? And what should the URL prefix be? And do I need
to change anything else?
If I am not being clear about anything regarding my
questions, please make a point of it, and I will try to be more
clear.
Thank you so much for helping!

> Host Directory:/root folder/ (if no root folder
directory use "/"
Or leave it blank.
> FTP Host:yoursite.com
I see that this is a *real* domain, with a real registration.
It's best to
just use 'example.com' for dummy domain names.
> URL Prefix:
http://your-site.com/
Ditto. And by the way, there was no hyphen when you first
used this!
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"DWFAQ.info" <[email protected]> wrote in
message
news:gkeu60$hjl$[email protected]..
> You need to be connected to the internet to test dynamic
attributes.
>
> For advanced/testing server enter the following
formatted exactly as it is
> displayed:
>
> Access:FTP
> FTP Host:yoursite.com
> Host Directory:/root folder/ (if no root folder
directory use "/" no
> quotations)
> Login:Host login Username
> Password: Host Login Password
> Check Save checkbox
> No other checkboxes
> URL Prefix:
http://your-site.com/
>
> Click the test button and see what happens.
>
> Best,
>

Time Capsule: Need help accessing my video surveillance DVR from the Internet.

I am using the latest 4th Generation Time Capsule attached to a DSL Modem. My 4 video Survilance DVR is connected to a switch then to the Time Capsule. How or what is needed to be able to access the DVR via the internet. I am able to access the DVR from within the home network only. Would appreciate some guidance.
Thanks in advance.

Is the modem bridged?
If not and working in router mode then the TC should be bridged.. this will never work if you have double NAT.
Whichever box is the main router will need to forward the required ports for the camera dvr.. does the software use port 80 ie html?? That means you just forward port 80 to the IP address of the dvr. But find out the port.. the dvr instructions should tell you. Port forwarding on the TC.. ain't hard.. just google for the instructions. If the dsl modem is router, read its manual.
You will need to lock the ip of the dvr so it doesn't shift. Do that in the router if possible but I am not sure you can on the TC. You will need to do it on the device using a static ip.
The other thing is public IP .. do you have a static public address.. if not you will need to run dyndns. this is not available in the TC.. as most things are not available. So you will also need to check the dvr remote access instructions as it might have a dyndns client.. or you will have to use dsl modem as router even if you currently bridge it.
Sorry this is making it complicated.
Give some feedback and we can go from there.
What is the main router?
What modem is it exactly?
What make and model is the DVR? A URL to the pdf manual will help if it gets complicated.
What port do you use to access the DVR?
Is there a dyndns client in the dvr?

Need Help Accessing OS X Server Remotely

Similar Messages

Maybe you are looking for