Need help adding a page to an existing website

Hey guys....I'm, as the subject states, a newbie to Dreamweaver. I am needing to add a page to an existing website. Simple enough...or so it seems...anyway, I went to the site, copied the source coding, went back to Dreamweaver, pasted into the code box, and up pops the page I copied. Great! So then I make my changes so that the page states what I want it to say, link it to what I need to hyperlink it to, then try to upload the page back onto the server....and here's where I get lost...I go to the web to check the site, and the page that I copied and made my own is not there. The link didn't work and the page is nowhere to be found. I don't mind whatsoever telling any of the what the site is (not sure if I can do that here), but any help would be very grateful!!! I'm not sure what I am doing wrong obviously. Many, many thanks in advance for any help you can give me!
Jim

At the moment the link you refer to goes to the file ashby.php
http://www.superiorcareplus.com/ashby.php?s=1
Do you have a page named ashby.php in your site folder?
If you do copy that and make the changes you require. Save it as whisperer.php
Now you need to change the link from ashby.php to whisperer.php
<div class="leftMenu"><a class="menuLeft" href="ashby.php?s=1">Becoming an Alzheimer's Whisperer</a></div>
So it looks like this:
<div class="leftMenu"><a class="menuLeft" href="whisperer.php">Becoming an Alzheimer's Whisperer</a></div>
I'm not sure if it will work because the link has a variable (?s=1) after it but as the links all go to different pages the information probably isn't being fetched from a database. In other words all the pages appear to exist as individual pages. I don't know what 's' the variable refers to.

Similar Messages

I need help adding a mouse motion listner to my game. PLEASE i need it for

I need help adding a mouse motion listner to my game. PLEASE i need it for a grade.
i have a basic game that shoots target how can use the motion listner so that paint objects (the aim) move with the mouse.
i am able to shoot targets but it jus clicks to them ive been using this:
public void mouse() {
dotX = mouseX;
dotY = mouseY;
int d = Math.abs(dotX - (targetX + 60/2)) + Math.abs(dotY - (targetY + 60/2));
if(d < 15) {
score++;
s1 = "" + score;
else {
score--;
s1 = "" + score;
and here's my cross hairs used for aiming
//lines
page.setStroke(new BasicStroke(1));
page.setColor(Color.green);
page.drawLine(dotX-10,dotY,dotX+10,dotY);
page.drawLine(dotX,dotY-10,dotX,dotY+10);
//cricle
page.setColor(new Color(0,168,0,100));
page.fillOval(dotX-10,dotY-10,20,20);
please can some1 help me

please can some1 help meNot when you triple post a question:
http://forum.java.sun.com/thread.jspa?threadID=5244281
http://forum.java.sun.com/thread.jspa?threadID=5244277

Need help adding schedule to xcode 4

I need help adding a tour schedule for an iphone app building an app for 13 djs and they want thier tour schedules added these need to be updated monthly is there a way to add this????

I don't know if this is the easiest way but it works for me. I connect the DVD player to my camcorder (so it's the 3 plugs yellow/red/white on one end and a single jack into the camera). Then I connect my camcorder to the computer (I think it's through a firewire port). Then I just play the DVD and the footage is digitized via the camcorder and I import it into iMovie 4 as it's playing. I believe the camcorder is just in VCR mode.
I have also used this method to transfer VHS tapes onto DVDs via the camera by connecting the VCR to the camera.
I haven't had much luck with movies over about 40 minutes on iMovie. But if it's home movies, there may be a logical break. Do maybe 20 minute segments (it's also really easy on iMovie to add a soundtrack if these are OLD films with no sound.
As you can see, I'm low tech!
Good luck!
Powerbook G4 Mac OS X (10.3.9)

Need help adding a second page on reports builder, paper layout.

Hi,
I have a requirement where I need to create a paper layout using Reports Builder (10.1.2.0.2). This report will print out the following:
1) Invoice
2) VAT Slip (on a separate page)
So far I have created the invoice part and it is printing properly. Now I want to add the Vat slip. When I use the "Trailer Section" on the rdf report, I create a frame and inserted some text. The report ran just fine. Then in the same frame, I added a repeating frame. And now the report is completing with the following error:
APPLLCSP Environment Variable set to :
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.UTF8
stat_low = 86
stat_high = 0
emsg:was terminated by signal 6
Enter Password:
MSG-00100: DEBUG: AfterPForm_Trigger +
MSG-00100: DEBUG: Multi Org established.
MSG-00100: DEBUG: AfterParam_Procs.Get_Country_Details
MSG-00100: DEBUG: Get_Country_Description.
MSG-00100: DEBUG: AfterParam_Procs.Switch_On_Debug
MSG-00100: Running in debug mode
MSG-00100: DEBUG: AfterParam_Procs.Get_Trx_Number_Low
MSG-00100: DEBUG: AfterParam_Procs.Get_Trx_Number_High
MSG-00100: DEBUG: AfterParam_Procs.Get_Tax_Option
MSG-00100: DEBUG: AfterPForm_Trigger -
*** glibc detected *** ora_rw20_run: munmap_chunk(): invalid pointer: 0x09067b10 ***
Anyone have any idea why this is happening? Any help is much appreciated.
Or is there any way I can add a page that has to be printed after the invoice?
Thanks
-Nelly

If you have created your own template (but it sounds like you haven't) you will need to 'capture' that page so it repeats on following pages.
The whole process is described here:
"Letterhead and follower sets"
http://www.freeforum101.com/iworktipsntrick/viewtopic.php?t=182&mforum=iworktips ntrick
Peter

I have a godaddy website with a welcome page- I need help adding a few additional pages with a hyperlink to my welcome page.

I need help attaching a few hyperlinks my godaddy welcome page. I have 2 more ipages articles, I also converted them to pdf. Godaddy only helped (last year) with the 1st article. I do not know how to attach a hyperlink to the artlcles and add the hyperlinks to my welcome page.

The program is called Pages not iPages. Just let us know if you do not speak English and what language you do speak so we can adjust for that.
The issues are to do with your web page not with Pages.
I think you are asking how to link from your web page to your pdf articles. You must first copy those pdfs to your web server, or some other web location, and then provide html links on your welcome page to those pdf files.
The pdfs themselves may contain links to other locations but I can not see that that is what you are asking for.
Nor to what those links would be to.
From your heading I think you may have confused the name of Pages, the word processing program, with web pages which are two different things.
Peter

Adding a single page to pre-existing website

I currently have a website running on Amazon S3 and want to add a page to the domain using Muse and do not want to replace the pre-existing website.
Example:
Current web address:
subsite.mywebsite.com
Desired address of Muse-created site:
subsite.mywebsite.com/musesite.html
subsite.mywebsite.com does not need to be modified in any way—my clients just need to be able to access musesite.html via a link using my brand's domain. Can this be accomplished using BusinessCatalyst provided hosting? If so, how can I accomplish this?

Hi Joseph,
You need to create the page in Muse and then export the html to a local folder on your computer and then upload the exported content on the root folder of your existing business catalyst site. You will not be able to use the web forms with this approach.
If you can host the site in a sub directory, then you can create the page in the Muse and then publish directly to a sub-directory on the root, this way you will be able to use the web forms.
- Abhishek Maurya

Noob Needs Help - Importing Html Pages into "My Site"

Greetings
I am sure this is a noob question that may have been asked, but I couldn't find it by searching so here goes.
I jumped right into Dream Weaver, following an online tutorial... and have a decent webpage but I must have skipped some steps or missed something and I would hate to backtrack and do it all over again...
When I began, I just started working on a HTML page... and now that its done, I want to make it a template etc...
But I never created a "site" as far as SITE > NEW SITE etc.
So now that I have, I need to tell DW that "These pages are included... these images are included, all that neat SPRY stuff I have done needs to be "in the site".
I am looking for a button that says, "Hey dummy, you need to select the pages that are included in your site" but can't find it...
Any help?
Thanks, in Advance
Greg
www.revfan.com

Creating your first web site in DW CS5 -
http://www.adobe.com/devnet/dreamweaver/articles/first_website_pt1.html
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb

Need Help Fast! Page is dispalying twice in quiz

I have created a quiz using tips from another post in this
forum. I insterted a regular slide with a continue button before
the quiz questions. I insterted another regular slide at the end of
the questions with a re-take button that points to that first
slide. This part is working great. When I take the published quiz,
I click the continue button, and instead of continuing, the slide
redisplays. I click the button again, and it moves forward like
it's supposed to. Any advice?
I'm supposed to have these posted in our LMS today for
testing, so I need help fast!!! Thanks!!

What you're seeing is likely the result of a MS patch for IE
in response
to the Eolas patent suit.
MS recently updated IE so any content shown in a page using
the Embed,
Object, or Script tags will need to be 'activated' before
they can be
clicked (or otherwise 'interacted with').
Your home computer probably hasn't had the latest security
rollup
installed, is why you're not seeing the issue on that
machine.
There is a work around, many site mention it. This may be a
good place
to start:
http://www.macromedia.com/devnet/activecontent/articles/devletter.html
Erik
dukekelly wrote:
> Why is it that as soon as you ask for help, you find the
answer?
>
> This isn't a captivate problem at all. It's an IE
problem. Because the button
> is a control in Flash, our systems where I work are
requiring us to click the
> screen to activate the controls. THEN you have to click
the button. When I play
> the movie on my home computer, this phenomenon isn't
happening. Now, how am I
> supposed to deal with that??? ASRRGGGHH!!!
>
Erik Lord
http://www.capemedia.net
Adobe Community Expert - Authorware
http://www.macromedia.com/support/forums/team_macromedia/
http://www.awaretips.net -
samples, tips, products, faqs, and links!
*Search the A'ware newsgroup archives*
http://groups.google.com/groups?q=macromedia.authorware

Need help adding Arch to Grub

I am trying to dual boot Arch Linux and Ubuntu. When I try to boot there is no option for Arch. I have added it to the menu.lst file in ubuntu. Arch is installed on sdb1 according to sudo fdisk -l I need help!

Fdisk -l
Disk /dev/sda: 80.0 GB, 80026361856 bytes
255 heads, 63 sectors/track, 9729 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0xb38ab38a
Device Boot Start End Blocks Id System
/dev/sda1 * 1 9544 76662148+ 83 Linux
/dev/sda2 9545 9729 1486012+ 5 Extended
/dev/sda5 9545 9729 1485981 82 Linux swap / Solaris
Disk /dev/sdb: 40.9 GB, 40992473088 bytes
255 heads, 63 sectors/track, 4983 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x0002eb1f
Device Boot Start End Blocks Id System
/dev/sdb1 * 1 4891 39286926 83 Linux
Disk /dev/sdc: 250.0 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x000ea9be
Device Boot Start End Blocks Id System
/dev/sdc1 1 30401 244196001 7 HPFS/NTFS
I think Arch is on the 40GB partition
Menu.lst
# menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-doc/.
## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not use 'savedefault' or your
# array will desync and will not let you boot your system.
default 0
## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 0
## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
hiddenmenu
# Pretty colours
#color cyan/blue white/blue
## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
## password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret
# examples
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST
### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below
## DO NOT UNCOMMENT THEM, Just edit them to your needs
## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
## kopt_2_6_8=root=/dev/hdc1 ro
## kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=ce3a864f-3f72-480b-96b3-54516b307170 ro
## default grub root device
## e.g. groot=(hd0,0)
# groot=ce3a864f-3f72-480b-96b3-54516b307170
## should update-grub create alternative automagic boot options
## e.g. alternative=true
## alternative=false
# alternative=true
## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
## lockalternative=false
# lockalternative=false
## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash
## should update-grub lock old automagic boot options
## e.g. lockold=false
## lockold=true
# lockold=false
## Xen hypervisor options to use with the default Xen boot option
# xenhopt=
## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0
## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
## altoptions=(recovery) single
# altoptions=(recovery mode) single
## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
## howmany=7
# howmany=all
## specify if running in Xen domU or have grub detect automatically
## update-grub will ignore non-xen kernels when running in domU and vice versa
## e.g. indomU=detect
## indomU=true
## indomU=false
# indomU=detect
## should update-grub create memtest86 boot option
## e.g. memtest86=true
## memtest86=false
# memtest86=true
## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false
## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false
## ## End Default Options ##
title Ubuntu 9.04
uuid ce3a864f-3f72-480b-96b3-54516b307170
kernel /boot/vmlinuz-2.6.28-11-generic root=UUID=ce3a864f-3f72-480b-96b3-54516b307170 ro quiet splash
initrd /boot/initrd.img-2.6.28-11-generic
quiet
#title Ubuntu 9.04, kernel 2.6.28-11-generic (recovery mode)
#uuid ce3a864f-3f72-480b-96b3-54516b307170
#kernel /boot/vmlinuz-2.6.28-11-generic root=UUID=ce3a864f-3f72-480b-96b3-54516b307170 ro single
#initrd /boot/initrd.img-2.6.28-11-generic
#title Ubuntu 9.04, memtest86+
#uuid ce3a864f-3f72-480b-96b3-54516b307170
#kernel /boot/memtest86+.bin
#quiet
# (0) Arch Linux
title Arch Linux
root (hd1,0)
kernel /vmlinuz26 root=/dev/sda3 ro
initrd /kernel26.img
### END DEBIAN AUTOMAGIC KERNELS LIST
title Arch
rootnoverify (hd0,1)
chainloader +1

Adding a page to an existing page

Does anyone know if it's possible to add a page to an existing page? If I try to add a page it adds it to the entire site (thus it showing up in the top bar - I don't want that). I just want a new page within in a page.
Any ideas?
Thanks for the help!

Awesome!!!
One more question regarding this... was able to create the page and remove from Nav bar...but how do I get the address of the new page to put for a link on the first page? Do I have to publish it first?
Thanks again!! I appreciate it!

Need help stopping home page from appearing

Hello:
I've designed and programed the site www.pawsandclawspets.com
but I can't figure our how to keep the home page from flashing when
going from one page to the next. I have all my movies loading onto
a level above it and don't want to hide the home page entirely as I
am using the nav at the top on all the pages.
Any thoughts?
Thanks!

boss33 wrote:
> Hi pple, need help here.
>
> Trying to make a site that uses scriptaculous and a few
other scripts like
> prototype and a few more.
>
> The thing is I can't seem to get the first image to
randomize on the site. So
> I've decided to discard that idea and move over to
making the home page one of
> my other pages specifically the "beauty" or as I call it
the art page.
>
The first image on your page is this:
<img id="logo" src="
http://test.inspiringmen.com/images/logo.png"
... />
onload=function(){
var imgs=[
"/images/logo.png",
"/images/another.png",
"/images/yetanother.jpg",
"/images/onemore.jpg"];
document.getElementById("logo").src=imgs[(+new
Date())%imgs.length];
This assumes that the "images" folder is at the root level of
your site.
You may add or remove image paths from the "imgs" array at
will.
Mick

ComboBox (dropdown) Need Help Adding URL links!!!

I am somewhat of a newbie....Anybody know how to use URL
links in a ComboBox dropdown menu? NEED HELP!!!!!!! I'm trying to
make it so that after selecting an option, the user is directed to
another URL within the same browser window. Using flash 8!
Thanks,

Im a bit a newbie myslef but i think you make flash
commuincate to javascript wich will make the browser goto the URL.
do a search on getURL and javascript together and i am sure
you will find something.
And when slecting to redirct i think its on?(onPress)
something so maybe look throught the help section in flash 8 and
look at componets. I think there is some actionscript help there.
Sorry i could not be more helpful.

Need Help with spry for uploading to a website

Sorry if there is already a thread about this but i cant seem to get this to work. So I have looked around an dfound that you need to have the spry files uploaded to the server and i have done that, but the page still looks wrong. Here is a link so you guys can see what it looks like and i'm sorry about the page being in norwegian.
http://miljopose.net/kjop.html
I really need help because this is for a project i am doing at school.

None of these files can be found
<script src="SpryAssets/SpryValidationTextField.js" type="text/javascript"></script>
<script src="SpryAssets/SpryValidationConfirm.js" type="text/javascript"></script>
<link href="SpryAssets/SpryValidationTextField.css" rel="stylesheet" type="text/css" />
<link href="SpryAssets/SpryValidationConfirm.css" rel="stylesheet" type="text/css" />
Please upload the files in the correct directory
Gramps

Need Help Adding Flash Intro To Existing Site

OK I'm helping a buddy of mine out and he's already got his sie built for him by someone else, the index file is .php. Now I've got this little Flash animation that we want to run first, then when it's done go to his website. When I try to add it to the top of the index page all that happens is the site loads like in normally did but with the Flash movie at the top instead of being another page. What do we need to do to have it load on it's own first?

yes. the index.html should embed your flash intro swf and at the end to your swf (and in a skip intro button code) you should open the current main page (using getURL or navigateToURL).

Need help adding video to a site

Hi Everyone:
I really need some help please. The owner of a site I am
working on sent me a DVD with video's he has taken and wants them
put on his site.
The files are VIDEO_TS and are MPEG files. How can I add the
video's to the site so that when I user clicks on the link, they
are able to either view the site or download the video to watch
later. I have other video's added to the site but I was able to
copy them and safe them the way there were added. The owner sells
products from the site I copied them from.
The site I am working on is www.buggyworld.net. Most of the
individual pages for the vehilces have videos on them and I am
trying to add these new ones the same way. I have never done this
before so really not sure how to. The videos that are already added
at Windows Media Audio/Video Files and that is how I would like to
convert this video to.
Any help would be so greatly appreciated.. thank you
Linda

Best bet would be to make Flash video so that everyone who
wants to (and has
the Flash Player plugin) can see them. Do you have Flash?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Frank Branker" <[email protected]> wrote in
message
news:f4ph73$rcd$[email protected]..
> What?s the size of your MPG file?
>
> It?s better if you convert your file to a wmv file
format because it?s
> important to keep your file size under 6 Megs. Do you
have the software to
> do
> this?
> Windows Movie maker might be able to do this you can
find it in your
> program
> files on your computer.
>
> If not we will have to work with what you have and do a
quick and dirty
> but I
> don?t advise that.
>
> Below is a list of tools you may want to consider
owning.
>
> Ripping Software
> This software will rip from a dvd to just about any
format including WMV
>
http://www.imtoo.com/dvd-ripper.html
>
> Compressing software
> Sorenson Squeeze Suite 4.5 is the industry-leading video
encoding tool
>
http://www.sorensonmedia.com/pages/?pageID=2
>
>
>

Need help adding a page to an existing website

Similar Messages

Maybe you are looking for